LCD/LED TV Backlight Repair - No Picture, Black Screen || Replace Single LED Using Candle
HTML-код
- Опубликовано: 22 июл 2024
- Sometime it happen that, you can hear the sound of your favorite LED/LCD TV. it is call backlight problem of led tv. You can repair this problem at home easily without any cost.
I jus use a candle to repair my led tv.
Following those rules, you also can repair your favorite led TV.
applied to much heat.. should cool it immediately, after soldering. the candle was good idea! thanks
Good job 👏
NIIIIIIICE MEN. NIIIIICE AND PERFECKT!!!!!!!
Nice job...well-done
Thank you! Cheers!
Perfect!
respect , great skills !!!
thanks a lot, friend
😮 very good led TV fix
Thanks sr
Is that solder paste??
The replaced leds are bigger?. That’s ok?
Good job sir
Thank u my bro
Each LED on the TV LED strip has 3 volts or 6 volts (for TVs with a diagonal greater than 39 inches)... the problem is that the LEDs from the light bulbs (most 2835, 5360, 5370, etc.) have a maximum current of 20 -25 mA, while the LEDs on the TV have an operating current between 280 mA and 350 mA... so the LEDs on the TV have a power of 3V x 0.35mA = 1.05W (watts) and each LED of the light bulb has 3V x 0.020 = 0.06W(watts)....there may also be light bulbs with LEDs that have 1W LEDs...TV manufacturers are not interested in selling TV LEDs, because most would buy 10-20 leds with the price of 0.5 dollars/piece "for the reserve" and the TV repairmen would also lose customers... because of this, only the LED strips specific to each TV brand can be found, because a TV LED strip costs between 10 and 20 dollars per piece, and the TVs have at least 2 bars with LEDs...thing for sale and profit of the producing companies
What happen if you bypass that led with a wire? Will the rest of the led strip work fine?
మీ వీడియోలు నాకు చాలా ఇష్టం
నేను మీ వీడియోలను కూడా ఇష్టపడుతున్నాను.
Awesome techniques
Glad you like them!
Well done my friend 👏 👍
Thanks for the visit
Hi i follow yo video i have harwa plasma HW32L1 strikes by lighting can you plz show me a video how to fix power supply thanks
Very nice
good job
Good job
What gel is used to stick led to strip?
The solder that remains on the LED and the strip are what make it "stick." The gel is flux that helps the solder flow back together between the two parts. If you don't use flux soldering is difficult and may have a poor (or no) connection.
Can you get a dry joint on these that causes an intermittent failure of the backlight?
Wow
Sir we can use any led light to replace damaged one?? Please rply
yes
Sir 3volt the led original we can use 6volt to replace tree damage
Good mac guiver
thanks a lot
Like the time macgiver welded with two truck batteries.
Indian MacGyver over here
😴😴😴I was late but not too late just in tym
Each led either tv or bulb have specific voltage to operate. It can be 3v or 6v etc etc. So the led tv strip you repaired had how many volts per led? and the led bulb you used to salvage leds had how many volts per led?? Both led tv and blub led must have same operating voltages. Kindly explain the wattage of led bulb that should be used for 32inch led tv. Thanks.
Dude he fixed a TV with a candle 🕯 😳 😂
@@KzeeAuckland WTF do you care as long as he fixed!!!, I hope he would fix your mouth next time .....tra la la la laaaaaa
No need of fancy equipment
Please use cigarette letter instead of candel
am so turned on
Hindi ni andi
If you are not good at speaking English, don't speak . Speak in your own language.. This is an free advice to you 😂