I did the same thing to an LG 42LN5300 last night. I ended up doing all the leds and lenses for fear of future failure for my customer. Just a few things to add to this great video: When reinstalling the diffuser lenses make sure you get all the old pieces out of there. If the diffuser lenses are too high off the LED it will create weird circular spots on the back light panel (layers under the lcd panel) that will be visible while watching TV.. i found that out the hard way and had to lower about half of the lenses. Also avoid prolonged heat or too much glue as it will discolor the led itself causing the panel to have inconsistent lighting...Great video!
Tampatec Thanks man, awhile back i was talking to you about a sony kdl-46hx800 with I think a five light blink that pointed me to the LED driver. I replaced it checked back lights, checked everything else. I found a service manual as well. Service manual said to replace the main board and if that didn't work the lcd panel was bad. I found a fuse the size of a grain of sand (1 of 20+ fuses) on the T con board that had a cold solder joint.. I just used my hot air station to heat the whole board up popped it back in and it worked! It was a 2010 TV that quit working in 2011 and sat till 2016. I actually obtained the TV for service in 2015 and after the T con board replacement failed to fix it the customer told me to go ahead and keep it because he did not want to spend anymore money on it ..It was an awesome feeling to bring back that TV..
Jess Rose good job! you seem like you been doing TV repair for awhile. Yeah those Sony TVs can be bad tcon boards or bad LCD panels or buffer boards hard wired to the panels. So far techs in China factories are doing the LCD panel connection repairs. I posted it on g+ but no one use that anymore.
2 thumbs up now just got attempt this. My Sharp Roku lc-50lb481c suddenly went dark. I did what you said with the LED light to see if anything is on in the background and sure enough it's working so hopefully this is the problem.
Thanks for the video I have a TV that have back like problem and I have be trying to fix it when I turn on the TV the light will on for about 2 seconds and goes off
The lesson is truly helpful to a beginner like me. Pls can you advise me what I should do to sort out the problem with sounds on a LCD TV. The picture is ok but the sound is not clear. It gives just some rattling sound. How can this be repaired? Do you recommend to replace the entire motherboard? The model is SLD3218CV Singer. Thanks, Tampatec!
Hi Paul, thanks so much for all the help. I have the shopjimmy LED tester and the rework station here, but unfortunately shopjimmy won't have compatible LED's for my Vizio E65-E3, so I'm going to have to go with another online vendor. Problem is, I'll have to find LED's that will match up. Good news: I found compatible 6V LED's with the right dimensions and anode/cathode solder points for my strips, and I successfully soldered and tested a couple of them so far. Bad news: I can't get a matching color. I've sampled up to 6500K Color Temp but none of the new ones I've tried are as far on the blue side of white as the existing (or the ones we see in your video). I'm starting to give up on finding a good color temp match. Do you think I should just use the new 6500K LED's and replace ALL of them even though the native LED color won't be the same? Maybe the TV color settings will be able to compensate? Have you ever been faced with this?
My Toshiba is a heavy and thick width TV but it's going strong. I took your advice and set the backlight lower but I've taken a gamble and set it to "Auto" as that seems to keep the backlight around the medium mark anyway (maybe you can shed some info on "auto" setting? thanks)
Interesting work procedure. I like that those LEDs can be replaced, however, in my opinion, depending on how old the LED strip is, I'm more prone towards replacing All the strips, to be on the safe side, of not having to go back in a month or two later, for the same reason, having had the opportunity. All the same, it is good inspiring technological work. I am currently about to replace the strips on my Samsung UN55J6200DAf..
Great video Question for you,i have a Samsung UN46EH5000FXZA series udo3 and i has 44 led's and got 20 that are burnt out. I already bought the work station and led strip tester,Where do i get the led's to solder in that will fit the strips.
It was an interesting video thanks for sharing. I have a Phillips LCD TV that shows a little bit picture. When I turn on it takes time for the picture to come up and then it is dark in the left side. Please give some advice about what I should do. Thanks.
Hello! I have a Lg model # 37ld340h. It just all of a sudden went to a black screen, still heard the volume then just completely stop doing anything. Could you please tell me what younthink it could be?
How do you determine what model of led you need for the strip? Is there anyway to tell prior to disassembly? Or do you need to see the led to tell? I have a Vizio M70-F3 if that helps
55X850C two years old getting darker and darker by the day . the middle is still well lit but picture blurs with motion . Can you tell me if this has at least two strips for a back light panel I can’t seem to find the answer anywhere .Great videos I think I want to start fixing TVs !!!!
I have a 55" LED, but mine goes dark intermittently, works fine. Sometimes it goes out qite few times but trning it off and back on restores the picture. Sometime it does this anywhere from every few seconds to a few minutes to the ooint the=at after going trhu this cycle for a while it remains bright with a couple of dark spots in the back ground, one in lower left corner other on right aabout two thirds down from the top.. Could this be due to the led failure ot=r just the backlightinh module??
Quick question.If the first LED is bad on the strips,then the whole strip will be dead right?Your tester still lit up the good ones and showed you the bad ones in the circuit.I tried 9 volts in a series and it didn't light up anything.I thougth these were wired liked Christmas lights.?1 out none works?
How much dose a repair like this cost because I just took a Emerson 50" to the TV repair shop and that repair for the LED backlights was $255 I'm a electrician and a little electronic savvy , you do make it look easy but could you but the LED backlights strips because I'm not tooled up like that, but your video's dose encourages me to stat working At least my own stuff 👍
Hi Tampatec we have a LG tv model number 37lk450u-zh the problem we have had is we recently moved to France from the UK and the tv was in storage before our arrival, I believe that it may have been damp in storage as there was condensation on the screen when we unpacked it, So when we plugged it in and turned it on it went pop which feel may have been a fuse on the circuit board maybe you could advise, I have attempted to click on you link for parts but this does not work which may be to do with the district we are in.
Thanks for the video. A few led diodes burnt in my LED tv. I don't have old strip to get diodes. Please let me know how to find correct type when ordering online. Forward Current, Watt, LM etc. Thank you
Hey Tampatec, I was wondering if you could help me figure out what's wrong with my led TV. I thought it didn't have a picture, but when I tried the flashlight test there actually was a picture, just very dim. So I figured that it was leds going out. I have 3 strips, the bottom one never comes on when testing it. The top one and more than half of the middle one lights when I test one led in the middle row. I'm using a digital multimeter that I bought from Walmart. I was just wondering what settings you put yours on. Thanks in advance.
Hi Tampatec Thanks for your help with your Videos .I have a Sharp LC-80LE632U that has worked for three and a half years and presently it's not working and I would like some assistance to fix it. I am getting a Blink 1S+1F code and the backlight is not coming on I have done some troubleshooting and the present state is :- [1] I am getting a Menu in the background with the Remote. [2] I have tested all the 15 LED strips with the Backlight tester ("They are thirty LED 'S in series") and the voltage of the tester moves from 315 to 175 volts and with a current meter in series I got 29.1 mA of current flowing through each strip. [3] I have tested two new Rows outside the TV and got the same 175 volts and 29.1 mA current. [4]Row one just like in the TV with three segments P/N:5073+5069+5071 all in series comprising of thirty LED's. [5] Row two ,, ,, ,, ,, ,, P/N:5072+5070+5024 all in series comprising of thirty LED's. For the fifteen Rows in the TV they have alternated Rows one and two. [6] I have just finished changing the Backlight driver IR2E67M after doing some Internet training and practicing on some Motherboard chips . After installing the chip I notice the whole Menu with the Backlight flickering a little and lasted for a around five seconds and if I disconnect the AC plug the TV would resort to 1-1 Blink code . [7] I rechecked the TV after cleaning and testing the Power Supply connectors with CRC and got a stable Menu. I was able to reset the TV using the Menu and started an auto tuning which got dim after finding about 14 channels. so.I am planning to re check the other Backlight components on the board and do a re-flow of all the soldering joints to see if I could improve on the present state of the board.I have also noticed that the Power Supply Diagram is not available in the Service Manuals for the 60 to 80 inch Sharp TV.
Will these kits work on Toshiba side lit TV's like the 46L5200U1? The LEDs are longer and only on the right side of the set in one long strip. Shop Jimmy has a replacement strip 2012SGS46 for $49.95 but no individual LEDs I could find.
Tampa I have a lg 32lb561b tv. Bought some 3528 leds to replace the ones on the strips but after the repair they burned out, 2 minutes after I switched on the tv. Could u send me a link with the correct leds?
2 big thumbs!!!! Thanks for all the great info. Is there a way to tell from the part number what size / color the LEDs are? Looking for info on a Samsung UN32EH4003FXZA. Part number Lumens D3GE-320SM0-R2. Thanks keep up the good work!
Dear Tampatec, I have a 50PA4500-UM from LG. It has sound but black screen. The remote works fine. So I can turn it on/standby and change the volume. I noticed when TV is on the power LED light at left-below of screen has no colour light. And when it is standby the light shows red. I used LED flashlight to check the screen when I press setting button. Nothing shows just black screen. BTW: when I press any button, the power light flash as red. So I removed the back cover of TV and check back light. It's all black and no more other light except two red lights on the EAX64696607 board. Could you please tell me what's the next step should I move? Thanks a lot and have a great weekend.
Hi, Tampatec, sorry I dont know your name, I wonder if you can advise me? I have a Teltech LE-40GB01-C LED TV, Turned on the screen glows a faint blue but nothing else, I tried the torch tip you gave in a video a while back, but cannot see anything?! but I can see the leds are lighting through the back. so I`m not sure what might be wrong!? Please ask if you want more details, many thanks Mick (McAVIT Yourway)
hi please can you help me i have a two month old hitachi 50hb6t72u. unfortunately a thunder storm blew it, because this is not covered under the warranty i took the tv apart myself couldnt find anything black or burnt or bulgeing, so took the power serply out and underneth could see that it had blown. so i ordered the part it came today i put it in and turned it on, the back lights come on for a split second then go off, the power light does not come on i know the poweer serply is working because i can hear it and also every time i turn it on the back lights come on for a split second. please could you tell me what else could of gone on the tv so i can fix it, we have kids and only bought this tv about 2 months ago and now have no tv and can not aford to buy another thank you in advance kind regards Mr A Patton.
Thanks for a great video. Can I use a hot air soldering station (no heat gun) instead of the backlight strip work station used in the video? If so, at what temperature? I didn't find the backlight work station for a reasonable price (I'm not in the US, so a) shipment costs exceed the price of the device itself and b) the power plug won't work for me).
Yes! You can get the tester for £10/$15 dollars, don't pay $60 for one that is identical but has a ShopJimmy sticker on! Also the LED Rework Station is just a soldering station with a sticker added and price doubled.
hey, i am from germany and we don't have acces to such 10$ replacement LED kits for such tv's , is it may possible to tell the specifications of these LED's so i can search for similar of this?
Hi m8 will you please confirm me every tv have different backlight led or we can use any led strip for any tv i mean to say if i m change only led point
I have a Phillips 42pf9631D/37 With audio but no pictures could this be the problem or are there other common problems that i can check not a tv. Tech was a small engine tech before health problems forced me to retire
will I be able to use these LED strips on my UE50F6400 series TV it also is 3D capable. I am stuck on what LED lights to use and ive tried searching for them but can't find them anywhere I don't know if I am searching for it wrong, please I need some help it would be much apreciated thank you
Hi Buddy. I have a Samsung 21 inch Flat screen LCD monitor made in 2005. It can be on it for a half hour at a time then I hear a loud high pitch sound shortly after that few minutes to 20 minutes the screen goes black and the power light goes off too. Then it both come on again for a second and then shuts down. It's like random reboots. If I unplug the monitor half hour and everything works good until high pitch sound comes back again. I look on all the circuit boards for blown capacitors and I see nothing? I don't know what it is? Can you help me? Thanks... Jim P.S. one time I turn up the LCD brightness and the noise came on immediately? The picture looks normal no dark spots nothing.
what about testing the led driver port to verivy there is power or not i have a samsung led tv that use board# bn44-00645d so im trying to find the pin out or schematic so i can measure those pins for that thanks
hi Tampatec...i have a problem with my LG LCD monitor makes spark sound & power light blinks once and go blank screen no video...your suggestion in this regards highly appreciated...awaiting for your reply....
my 55 in rca tv got audio .no video the screen will flash when turned on and can see picture in back ground with light and the led lights flash when it turns on but the led's wont stay on
Hi, Hope you are doing fine.. got a problem with my Sony W700C internet tv.... when I turn on my TV for couple of seconds like 5 seconds picture in the screens are ok, after that screen go black.. I can still hear the sound but just a black screen. I've tested with a flash light as you've describe in your another videos, I can't see anything on the screen... For first 4 - 5 seconds (ie: when I first time turn on the tv) displays everything ok, not even blurry or anything... picture on screen is 100% ok. hope you can help me troubleshooting this problem . Regards.
I had a lightning strike and TV turns on fine, I can see over the air channels but when I switch to HDMI it detects what is connected (XBOX or Firestick) but then after cycling it says no input signal. tried different cables and to save money I replaced the side ports but still no signal from HDMI ports. I'm really trying to avoid buying another mother board for financial issues, I saw a video of someone heating board to hopefully have the solder fall back in place. I appreciate any help. sorry for long message.
I have a LG TV LED 32 '' At first when I turn it on I get a black screen and then after about 5-10 minutes it works normally. What can it be? Thank you very much for your videos.
Hi I have a Veon 55 ' 4k Ultra HD LED LCD tv.Model V55UHDS. I have no picture and no sound. I plug it in and get a red standby light.I then power on the tv and get a blue power on light.But on the screen theres no picture and also no audio. The screen stays on for 1 minute and 19 seconds then back to the red standby light.Any help would be appreciated.I dont have/own a multimetre to test it. Thanks.
Hi Tampatec, I have a 3 year old flat screen Samsung Tv and the problem I am having is with the standby light. When TV is off the standby light is not coming on as it should. As a result I cannot put the TV on again. The TV can only come on again if I unplug the electricity, wait for some time... plug it back and then the standby light comes on and I can then watch tv. There is only one light and it's red. Please help! I have sent it for repairs and they haven't managed to fix the problem. Thanks for your help. xxx
i have Sony GJ-DLEDII-400-D409-V4 LED KDL-40R350B. i need an LED repair kit, shop jimmy does not show the kit. are there any other places to look? i have 1 LED on each strip out and set wont stay powered up. i used LED tester to confirm the issue
It looks like Shop Jimmy is not answering the comments (not that I can blame them). That's too bad because I have a question as well. I have found a TV that keeps blowing backlights. I have replaced three LEDs so far and I bet it will blow another one. It's a Haier HA2347 55" curved TV. I have the service manual and the voltage to the backlights is within specs. I can only assume there is an issue in the power supply that is intermittent, or something wrong with the power in the house. Does anyone have any other suggestions?
I've got a Viore LCT37V66HM Flat TV that has a picture for 15 mins and then lines and snow start to run through the picture. Everything else works fine. Which board could it be?
Helllooooo Tampatec!!! i just tested all the leds one was burnt out and replaced one led, the backlight now works for 1 second. then it fades away. what would you suspect in this situation. i mean its a better result than no backlight at all buuut its only for one second lol
its like it starts and then draws too much current and overcurrent protection kicks in and it dies out . i measured voltage with my multi meter and it goes to 120ish then goes down to zero
Hello, I have a Sharp 4T-B6OCJ1U that the screen use to turn on for 15 seconds and then turn off. Now, the backlight will not turn on at all. I'm having the issue of finding parts for this tv.
como puedo alquirir las cinta para Led de pantalla del televisor Sanyo HDTV LCD/TVHDACL con el numero de modelo DP50E44, con el numero de chassis P50E44-01
hello, i wants to buy back-light strip kit but your home page is not working in my country, i can only see is ur RUclips channel, so can you help me to how to buy parts from shop-jimmy.
I did the same thing to an LG 42LN5300 last night. I ended up doing all the leds and lenses for fear of future failure for my customer. Just a few things to add to this great video:
When reinstalling the diffuser lenses make sure you get all the old pieces out of there. If the diffuser lenses are too high off the LED it will create weird circular spots on the back light panel (layers under the lcd panel) that will be visible while watching TV.. i found that out the hard way and had to lower about half of the lenses. Also avoid prolonged heat or too much glue as it will discolor the led itself causing the panel to have inconsistent lighting...Great video!
good tips
Tampatec Thanks man, awhile back i was talking to you about a sony kdl-46hx800 with I think a five light blink that pointed me to the LED driver. I replaced it checked back lights, checked everything else. I found a service manual as well. Service manual said to replace the main board and if that didn't work the lcd panel was bad. I found a fuse the size of a grain of sand (1 of 20+ fuses) on the T con board that had a cold solder joint.. I just used my hot air station to heat the whole board up popped it back in and it worked! It was a 2010 TV that quit working in 2011 and sat till 2016. I actually obtained the TV for service in 2015 and after the T con board replacement failed to fix it the customer told me to go ahead and keep it because he did not want to spend anymore money on it ..It was an awesome feeling to bring back that TV..
Jess Rose good job! you seem like you been doing TV repair for awhile. Yeah those Sony TVs can be bad tcon boards or bad LCD panels or buffer boards hard wired to the panels. So far techs in China factories are doing the LCD panel connection repairs. I posted it on g+ but no one use that anymore.
How much you will charge I'm in need of mine getting done
Hi have a LG smart TV model number 50 LN5750 , i am having the back light issue , can you tell where can i find the compatible back light strip
Good morning. Your program are so interesting,I love it. How can have ur repair kits
2 thumbs up now just got attempt this. My Sharp Roku lc-50lb481c suddenly went dark. I did what you said with the LED light to see if anything is on in the background and sure enough it's working so hopefully this is the problem.
Great video thanks for sharing
I saw a jar of Radio Shack Flux. This warms my heart and breaks it at the same time. I miss Radio Shack.
Muito bom. Obrigado pela demonstração.
Thanks for the video I have a TV that have back like problem and I have be trying to fix it when I turn on the TV the light will on for about 2 seconds and goes off
@@Techcommunity360 did you fix
it its happening to me
The lesson is truly helpful to a beginner like me. Pls can you advise me what I should do to sort out the problem with sounds on a LCD TV. The picture is ok but the sound is not clear. It gives just some rattling sound. How can this be repaired? Do you recommend to replace the entire motherboard? The model is SLD3218CV Singer. Thanks, Tampatec!
Hi Paul, thanks so much for all the help. I have the shopjimmy LED tester and the rework station here, but unfortunately shopjimmy won't have compatible LED's for my Vizio E65-E3, so I'm going to have to go with another online vendor. Problem is, I'll have to find LED's that will match up. Good news: I found compatible 6V LED's with the right dimensions and anode/cathode solder points for my strips, and I successfully soldered and tested a couple of them so far. Bad news: I can't get a matching color. I've sampled up to 6500K Color Temp but none of the new ones I've tried are as far on the blue side of white as the existing (or the ones we see in your video). I'm starting to give up on finding a good color temp match. Do you think I should just use the new 6500K LED's and replace ALL of them even though the native LED color won't be the same? Maybe the TV color settings will be able to compensate? Have you ever been faced with this?
Good info thanks.
My Toshiba is a heavy and thick width TV but it's going strong. I took your advice and set the backlight lower but I've taken a gamble and set it to "Auto" as that seems to keep the backlight around the medium mark anyway (maybe you can shed some info on "auto" setting? thanks)
Just a simple question. Are Hisense TVs worth repairing? One I'm working on has screen rubber taped to frame.
Yes, if tv is less than 5 years old it's worth fixing. How long tape fix last?
Interesting work procedure. I like that those LEDs can be replaced, however, in my opinion, depending on how old the LED strip is, I'm more prone towards replacing All the strips, to be on the safe side, of not having to go back in a month or two later, for the same reason, having had the opportunity. All the same, it is good inspiring technological work. I am currently about to replace the strips on my Samsung UN55J6200DAf..
Nice work! I used a simple clothes Iron upside down to remove My LED's and a multimeter with diode mode is enough to test them with 8-)
phil mcguire That’s exactly what I was trying to find out! I just wanna use an iron and swap 3 leds out. How low was temp on iron and did it work out?
Do you work in Chicago I need my TV fixed
Great video Question for you,i have a Samsung UN46EH5000FXZA series udo3 and i has 44 led's and got 20 that are burnt out. I already bought the work station and led strip tester,Where do i get the led's to solder in that will fit the strips.
I’m learning a lot from you, Tamp. 🙏
It was an interesting video thanks for sharing. I have a Phillips LCD TV that shows a little bit picture. When I turn on it takes time for the picture to come up and then it is dark in the left side. Please give some advice about what I should do. Thanks.
Senia Escalera check the tcon cables connections going to panel use Electronics freeze spray to locate the problem area.
Hello! I have a Lg model # 37ld340h. It just all of a sudden went to a black screen, still heard the volume then just completely stop doing anything. Could you please tell me what younthink it could be?
Hi good working
very very good Teaching
lovely sir. all people using tha videos thank you very mache sir
I like the video on how to disassemble the tv I like the steep by steep directions
Man you are a legend thank u very much!!
How do you determine what model of led you need for the strip? Is there anyway to tell prior to disassembly? Or do you need to see the led to tell? I have a Vizio M70-F3 if that helps
Just search online your model and replace the led strips. They are cheap $
very nice
55X850C two years old getting darker and darker by the day . the middle is still well lit but picture blurs with motion . Can you tell me if this has at least two strips for a back light panel I can’t seem to find the answer anywhere .Great videos I think I want to start fixing TVs !!!!
I have a 55" LED, but mine goes dark intermittently, works fine. Sometimes it goes out qite few times but trning it off and back on restores the picture. Sometime it does this anywhere from every few seconds to a few minutes to the ooint the=at after going trhu this cycle for a while it remains bright with a couple of dark spots in the back ground, one in lower left corner other on right aabout two thirds down from the top.. Could this be due to the led failure ot=r just the backlightinh module??
Quick question.If the first LED is bad on the strips,then the whole strip will be dead right?Your tester still lit up the good ones and showed you the bad ones in the circuit.I tried 9 volts in a series and it didn't light up anything.I thougth these were wired liked Christmas lights.?1 out none works?
How much dose a repair like this cost because I just took a Emerson 50" to the TV repair shop and that repair for the LED backlights was $255 I'm a electrician and a little electronic savvy , you do make it look easy but could you but the LED backlights strips because I'm not tooled up like that, but your video's dose encourages me to stat working At least my own stuff 👍
Hi Tampatec we have a LG tv model number 37lk450u-zh the problem we have had is we recently moved to France from the UK and the tv was in storage before our arrival, I believe that it may have been damp in storage as there was condensation on the screen when we unpacked it,
So when we plugged it in and turned it on it went pop which feel may have been a fuse on the circuit board maybe you could advise, I have attempted to click on you link for parts but this does not work which may be to do with the district we are in.
Thanks for the video. A few led diodes burnt in my LED tv. I don't have old strip to get diodes. Please let me know how to find correct type when ordering online. Forward Current, Watt, LM etc. Thank you
Nice👍
good advice like it
Good afternoon. How do I buy the desoldering machine and welding the smd Led? I'm in Brazil.
What is the best led backlight to use for your TV
Hey Tampatec, I was wondering if you could help me figure out what's wrong with my led TV. I thought it didn't have a picture, but when I tried the flashlight test there actually was a picture, just very dim. So I figured that it was leds going out. I have 3 strips, the bottom one never comes on when testing it. The top one and more than half of the middle one lights when I test one led in the middle row. I'm using a digital multimeter that I bought from Walmart. I was just wondering what settings you put yours on. Thanks in advance.
Hi Tampatec Thanks for your help with your Videos .I have a Sharp LC-80LE632U that has worked for three and a half years and presently it's not working and I would like some assistance to fix it. I am getting a Blink 1S+1F code and the backlight is not coming on I have done some troubleshooting and the present state is :- [1] I am getting a Menu in the background with the Remote. [2] I have tested all the 15 LED strips with the Backlight tester ("They are thirty LED 'S in series") and the
voltage of the tester moves from 315 to 175 volts and with a current meter in series I got 29.1 mA of current flowing through each strip. [3] I have tested two new Rows outside the TV and got the same 175 volts and 29.1 mA current.
[4]Row one just like in the TV with three segments P/N:5073+5069+5071 all in series comprising of thirty LED's.
[5] Row two ,, ,, ,, ,, ,, P/N:5072+5070+5024 all in series comprising of thirty LED's.
For the fifteen Rows in the TV they have alternated Rows one and two. [6] I have just finished changing the Backlight driver IR2E67M after doing some Internet training and practicing on some Motherboard chips . After installing the chip I notice the
whole Menu with the Backlight flickering a little and lasted for a around five seconds and if I disconnect the AC plug the TV would resort to 1-1 Blink code . [7] I rechecked the TV after cleaning and testing the Power Supply connectors with CRC and got a stable Menu. I was able to reset the TV using the Menu and started an auto tuning which got dim after finding about
14 channels. so.I am planning to re check the other Backlight components on the board and do a re-flow of all the soldering joints to see if I could improve on the present state of the board.I have also noticed that the Power Supply Diagram is not available in the Service Manuals for the 60 to 80 inch Sharp TV.
@Tampatec, can the small fuse at the base of the strips be replaced as well? I replaced an LED but the fuse was grey instead of black
Will these kits work on Toshiba side lit TV's like the 46L5200U1? The LEDs are longer and only on the right side of the set in one long strip. Shop Jimmy has a replacement strip 2012SGS46 for $49.95 but no individual LEDs I could find.
Tampa I have a lg 32lb561b tv. Bought some 3528 leds to replace the ones on the strips but after the repair they burned out, 2 minutes after I switched on the tv. Could u send me a link with the correct leds?
The LED Back-light strips are LB50068,
but what is the part number for the LED that is soldered on to the strip for the VIZIO E50x-E1 ?
2 big thumbs!!!! Thanks for all the great info. Is there a way to tell from the part number what size / color the LEDs are?
Looking for info on a Samsung UN32EH4003FXZA. Part number Lumens D3GE-320SM0-R2.
Thanks keep up the good work!
Awesome
Dear Tampatec,
I have a 50PA4500-UM from LG. It has sound but black screen. The remote works fine. So I can turn it on/standby and change the volume. I noticed when TV is on the power LED light at left-below of screen has no colour light. And when it is standby the light shows red. I used LED flashlight to check the screen when I press setting button. Nothing shows just black screen. BTW: when I press any button, the power light flash as red.
So I removed the back cover of TV and check back light. It's all black and no more other light except two red lights on the EAX64696607 board.
Could you please tell me what's the next step should I move?
Thanks a lot and have a great weekend.
I still have my Samsung 46" LN46C630K1FXZC since 2009 I know I'm over the time threshold, I'm amazed it's still working.
How do you solded the LED? Or glued? Thanks.
Hi, Tampatec, sorry I dont know your name, I wonder if you can advise me?
I have a Teltech LE-40GB01-C LED TV,
Turned on the screen glows a faint blue but nothing else, I tried the torch tip you gave in a video a while back, but cannot see anything?! but I can see the leds are lighting through the back. so I`m not sure what might be wrong!? Please ask if you want more details, many thanks Mick (McAVIT Yourway)
Is there a way to replace the diodes on the strip and how can I get new ones
Hi good day my devant TV yesterday shut off the picture but have sound what can I do to fix it. Thank you I hope you can help me for my problem
Tampatec... i've got a couple questions about a tv it's a RCA LED65G55R120Q no picture but it does blink a few times when first turned on
hi please can you help me i have a two month old hitachi 50hb6t72u.
unfortunately a thunder storm blew it, because this is not covered under
the warranty
i took the tv apart myself couldnt find anything black or burnt or
bulgeing, so took the power serply
out and underneth could see that it had blown. so i ordered the part it
came today i put it in and
turned it on, the back lights come on for a split second then go off,
the power light does not come on
i know the poweer serply is working because i can hear it and also every
time i turn it on the back lights come on for a split second. please
could you tell me what else could of gone on the tv so i can fix it, we
have kids and only bought this tv
about 2 months ago and now have no tv and can not aford to buy another
thank you in advance
kind regards
Mr A Patton.
Are you from Tampa? Do u have local location?
Thanks for a great video. Can I use a hot air soldering station (no heat gun) instead of the backlight strip work station used in the video? If so, at what temperature? I didn't find the backlight work station for a reasonable price (I'm not in the US, so a) shipment costs exceed the price of the device itself and b) the power plug won't work for me).
Yes! You can get the tester for £10/$15 dollars, don't pay $60 for one that is identical but has a ShopJimmy sticker on! Also the LED Rework Station is just a soldering station with a sticker added and price doubled.
GOOD JOB BROTHER ,
Will LATWT470RELZK less work on 60LN5600?
what are the types of tool you are using....can i have a list thanks man
Can you use a hot air station and solder paste instead of the plate?
these are the video's I want to see more of how to and you check voltage take the LED TV part fix led solder repair
Hi how to get buy the LED Strip Rework Station.?
Can I not test the LEDs without the tester? I am trying to figure out if it's the inverter, driver or whatnot. It's just the back light not working.
hey, i am from germany and we don't have acces to such 10$ replacement LED kits for such tv's , is it may possible to tell the specifications of these LED's so i can search for similar of this?
Hi m8 will you please confirm me every tv have different backlight led or we can use any led strip for any tv i mean to say if i m change only led point
Yeah, unfortunately they are not universal.
Thanks m8 i m really enjoyed ur video keep it up
I have a Phillips 42pf9631D/37
With audio but no pictures could this be the problem or are there other common problems that i can check not a tv. Tech was a small engine tech before health problems forced me to retire
will I be able to use these LED strips on my UE50F6400 series TV it also is 3D capable. I am stuck on what LED lights to use and ive tried searching for them but can't find them anywhere I don't know if I am searching for it wrong, please I need some help it would be much apreciated thank you
Hi Buddy. I have a Samsung 21 inch Flat screen LCD monitor made in 2005. It can be on it for a half hour at a time then I hear a loud high pitch sound shortly after that few minutes to 20 minutes the screen goes black and the power light goes off too. Then it both come on again for a second and then shuts down. It's like random reboots. If I unplug the monitor half hour and everything works good until high pitch sound comes back again. I look on all the circuit boards for blown capacitors and I see nothing? I don't know what it is? Can you help me? Thanks... Jim
P.S. one time I turn up the LCD brightness and the noise came on immediately? The picture looks normal no dark spots nothing.
how much volts to check a single led chip (cob) if someone dont have a led tester !
Tampatec, can you reuse leds from another strip?
Have you heard when those rework stations will be back in stock? They're out of stock on ShopJimmy.
not sure, I'll ask.
how do i buy parts from shop jimmy?
what about testing the led driver port to verivy there is power or not i have a samsung led tv that use board# bn44-00645d so im trying to find the pin out or schematic so i can measure those pins for that thanks
hi Tampatec...i have a problem with my LG LCD monitor makes spark sound & power light blinks once and go blank screen no video...your suggestion in this regards highly appreciated...awaiting for your reply....
my 55 in rca tv got audio .no video the screen will flash when turned on and can see picture in back ground with light and the led lights flash when it turns on but the led's wont stay on
Hi,
Hope you are doing fine.. got a problem with my Sony W700C internet tv.... when I turn on my TV for couple of seconds like 5 seconds picture in the screens are ok, after that screen go black.. I can still hear the sound but just a black screen. I've tested with a flash light as you've describe in your another videos, I can't see anything on the screen... For first 4 - 5 seconds (ie: when I first time turn on the tv) displays everything ok, not even blurry or anything... picture on screen is 100% ok.
hope you can help me troubleshooting this problem .
Regards.
How many volts do these strips need? I have a LG 50U that just blinks then black.
I have a Sharp 50" LED tv, totally no picture. Just wonder if only one strip is bad will make the whole TV black? Thanks
I had a lightning strike and TV turns on fine, I can see over the air channels but when I switch to HDMI it detects what is connected (XBOX or Firestick) but then after cycling it says no input signal. tried different cables and to save money I replaced the side ports but still no signal from HDMI ports. I'm really trying to avoid buying another mother board for financial issues, I saw a video of someone heating board to hopefully have the solder fall back in place. I appreciate any help. sorry for long message.
I have a LG TV LED 32 '' At first when I turn it on I get a black screen and then after about 5-10 minutes it works normally. What can it be? Thank you very much for your videos.
Is possible to replace it with an LED from an LED lights bolb?
Hi I have a Veon 55 ' 4k Ultra HD LED LCD tv.Model V55UHDS. I have no picture and no sound. I plug it in and get a red standby light.I then power on the tv and get a blue power on light.But on the screen theres no picture and also no audio. The screen stays on for 1 minute and 19 seconds then back to the red standby light.Any help would be appreciated.I dont have/own a multimetre to test it. Thanks.
super
what LEDs do i need or have they been used?
hi, where can i asked that offers a home service to fux my TV
Hi Tampatec, I have a 3 year old flat screen Samsung Tv and the problem I am having is with the standby light. When TV is off the standby light is not coming on as it should. As a result I cannot put the TV on again.
The TV can only come on again if I unplug the electricity, wait for some time... plug it back and then the standby light comes on and I can then watch tv. There is only one light and it's red. Please help! I have sent it for repairs and they haven't managed to fix the problem.
Thanks for your help. xxx
What voltage should I be reading for the LED connection coming off the power supply board on a RCA model LED65G55R120Q
how much is this service at a shop?
Good
i have Sony GJ-DLEDII-400-D409-V4 LED KDL-40R350B. i need an LED repair kit, shop jimmy does not show the kit. are there any other places to look? i have 1 LED on each strip out and set wont stay powered up. i used LED tester to confirm the issue
I cant get to the link for the backlight strip work station.. how can i buy.. please assist
It looks like Shop Jimmy is not answering the comments (not that I can blame them). That's too bad because I have a question as well.
I have found a TV that keeps blowing backlights. I have replaced three LEDs so far and I bet it will blow another one.
It's a Haier HA2347 55" curved TV. I have the service manual and the voltage to the backlights is within specs. I can only assume there is an issue in the power supply that is intermittent, or something wrong with the power in the house.
Does anyone have any other suggestions?
Can you show the technique of jumping a wire from LED
I'm in the Whitehall area looking for a place to take my flat screen Samsung or a repair shop that works on them reasonable
I've got a Viore LCT37V66HM Flat TV that has a picture for 15 mins and then lines and snow start to run through the picture. Everything else works fine. Which board could it be?
I have a led TV side light bleeding is it worth fixing
Helllooooo Tampatec!!! i just tested all the leds one was burnt out and replaced one led, the backlight now works for 1 second. then it fades away. what would you suspect in this situation. i mean its a better result than no backlight at all buuut its only for one second lol
might have another bad led causing the circuit to fail.
its like it starts and then draws too much current and overcurrent protection kicks in and it dies out . i measured voltage with my multi meter and it goes to 120ish then goes down to zero
Hello, I've got LG 65lb7100 led tv . not picture and only sound. can i get backlight kit?
hk kim first watch my other videos how to detect if your backlight is bad and yes shopjimmy.Com has LED backlight kits.
Hello,
I have a Sharp 4T-B6OCJ1U that the screen use to turn on for 15 seconds and then turn off. Now, the backlight will not turn on at all. I'm having the issue of finding parts for this tv.
What voltage and watt's is required for the led strip backlight?.
For piece
It varies depending on the size of the TV. Larger TVs (55") can use 350V. I have no idea the wattage. It would depend on how many lights there are.
What could be the reason for a no picture on the TV with half dark screen? Thanks
como puedo alquirir las cinta para Led de pantalla del televisor Sanyo HDTV LCD/TVHDACL con el numero de modelo DP50E44, con el numero de chassis P50E44-01
hello,
i wants to buy back-light strip kit but your home page is not working in my country, i can only see is ur RUclips channel, so can you help me to how to buy parts from shop-jimmy.
Do not deform the bar with prolonged heating ?