How To EASILY REMOVE Hot Glue From Car
HTML-код
- Опубликовано: 11 сен 2024
- How To Easily Remove PDR Hot Glue from a Car Without Damaging the Paint.
So you want to know how to remove that hot glue from your car. Well, today I’m going to show you how to easily remove that PDR Glue off your car and do it without damaging the paint.
⤵ Tools used in this video ⤵
➡ Gloveworks Nitrile Gloves - amzn.to/2GRy3HK
➡ 99% Isopropyl Alcohol - amzn.to/2E0YhEx
➡ Mini Lifter Glue Tab Puller for PDR - amzn.to/2BF8QwT
➡ Surebonder Cordless Glue Gun - amzn.to/2GZmcY2
➡ Wagner Heat Gun - amzn.to/2GZmcY2
------------------------------
✅ Check out my list of recommended PDR tools on Amazon goo.gl/vVrHxQ
-------------------------------
************
Some links may be affiliate links.
As an Amazon Associate I earn from qualifying purchases.
You won't pay more for using them, but I may receive compensation for the referral.
If you found these videos and links helpful, then I appreciate it.
************
✅ Subscribe To My Paintless Dent Removal Channel:
goo.gl/ZVlsrz
▶️ So, did you get one of those PDR glue pulling kits to take a dent out of your car? Maybe you’ve seen a video that showed you that just sticking a tab on your car with some hot glue and just pulling, that it would just pop off the car and the dent would just magically be gone.
Then you’ve gone and tried it on your car and now you’re stuck with a big piece of glue on your car and you’re not sure how to take it off the car without damaging the paint.
I am going to show you how I remove the glue from the car when I’m doing paintless dent removal.
So what do you do when you pull the dent and still have the glue stuck to the car? Well, what you’ll want to use is rubbing or isopropyl alcohol to easily take it off.
When you are using the rubbing alcohol to pull off the glue, all you’ll need is a small dropper bottle or a small spray bottle. Then by just applying a small amount next to the edge of the glue and giving it a couple of seconds to work, you can then easily pull off the glue.
If you are having trouble with it working, then you can try to lift just the edge of the glue and then put a few more drops of the alcohol behind the glue. This will help get more of the rubbing alcohol between the glue and the car to help release it.
If needed, you can also use a plastic scraper to help lift the glue.
Now sometimes when glue pulling a dent the hot glue will come off the car but may stick to the PDR Glue tab. This same technique will also remove the glue from the tab so that it can be used again.
So now that you’ve seen how to easily remove the hot glue from your car, you might be wondering how we use the glue pulling method of paintless dent removal to take out dents. Well, you can check out this playlist of videos from my channel that shows many different types of dents and damage where I used glue pulling to remove the dents.
➡️ • Glue Pull Dent Removal
**********
How To Get Glue Off a Car www.wikihow.co...
How To Remove Hot Glue www.wikihow.co...
**********
Timeline of the PDR Glue Removal Method
0:40 Where Glue Pulling Dent Repair Glue Removal Will Work
0:59 What To Use For PDR Hot Glue Removal
2:34 Removing The Hot Glue From The Car
3:07 Removing Glue From PDR Glue Tab
3:27 Bonus Tips To Help Remove PDR Glue
4:09 What To Watch Out For When Removing PDR Glue From A Car
6:20 More Videos On How We Use PDR Glue Pulling
**********
#removehotglue #howto #pdrglue
*****The Paintless Dent Repair videos on the Excel Dent Removal RUclips channel are designed to share what high-quality paintless dent removal can produce when done by a qualified PDR technician.
These PDR videos are not for teaching or training purposes or for those looking for DIY methods of dent repair. If you want to attempt these repairs, then you do so at your own risk, whether personally or by additional damage to your car.*****
Excel Dent Removal
1550 91st Ave NE STE 303
Blaine, MN 55449
Phone: (763) 780-4000
Excel Dent Removal Website:
www.exceldentr...
Google Map and Directions to Excel Dent Removal:
goo.gl/NVR6AZ
Excel Dent Removal's Google Business Site:
goo.gl/ZzNSxN
=================
Subscribe:
goo.gl/ZVlsrz
RUclips Channel:
goo.gl/EimW1A
Facebook:
/ exceldentremoval
Instagram:
/ exceldentremoval
Twitter:
/ exceldentrepair
Excel Dent Removal Blog:
www.exceldentbl...
=============================
Watch How To Remove Hot Glue Video Here: • How To EASILY REMOVE H...
============================
How To Easily Remove PDR Hot Glue from a Car Without Damaging the Paint
⤵ Tools used in this video ⤵
➡ Gloveworks Nitrile Gloves - amzn.to/2GRy3HK
➡ 99% Isopropyl Alcohol - amzn.to/2E0YhEx
➡ Mini Lifter Glue Tab Puller for PDR - amzn.to/2BF8QwT
➡ Surebonder Cordless Glue Gun - amzn.to/2GZmcY2
➡ Wagner Heat Gun - amzn.to/2GZmcY2
------------------------------
✅ Check out my list of recommended PDR tools on Amazon goo.gl/vVrHxQ
-------------------------------
************
Some links may be affiliate links.
As an Amazon Associate I earn from qualified purchases.
You won't pay more for using them, but I may receive compensation for the referral.
If you found this video and links helpful, then I appreciate it.
************
is there a particular type of hot glue you use or just any ole hot glue will do the trick?
I usually use the Tab Weld, but also the green glue. You can see them at the link to the amazon shop above.
Thank so can this work on my wig cap to remove glue on my wig cap which one l use ??
Alcohol seems to be the anwser to a lot of problems .
😂
2019: don't get alcohol on your hands, 2020: smother yourself in alcohol ever 2 mins.
Haha!! 🤣
2021: Ban alcohol. I’m offended
I could listen to this dude talk all day.
Thank you for making this video. I did the exact thing I spent $100 on Amazon buying Dent pullers and now I got glue stuck all over my car. And guess what the dancer still there. Cuz as you try to scrape and pull the glue off it pushes the dents back in...Junk Crap!!!
The heat really help good thing I own one
Thank You for this info because, no directions provided no surprise from China and no glue removal either.
Yep, there isn't much help with those cheap kits. I've seen many people wonder how to use them or see vehicles with the glue still stuck to the car.
Good video. I bought one of those kits with the puller and the plastic glue on pullers, and spray alcohol and a separate hammer and punch with plastic ends of different shapes. Yet in spite of all that, generally it's been unsuccessful. It seems the smaller plastic glue pieces just don't have sufficient surface area to have enough glue to allow for a stronger pull. It pops off before it can move the metal. I've seen other videos where they work from the underside first with a metal tool with a plastic end to push the dent up first. Then tap on it to get the higher spots down. The glue seemed to be more successful with larger dents where you could put like a one or two inch plastic part on with a lot more glue. And rather than the squeeze and pull tool, they use a manual whacker tool that does a fast yank one time. Probably more effective.
Awesome tips, thank you for uploading. I just tried some isopropyl alcohol and it worked a treat. Really appreciate the advice. 👌😎
Thank you for posting this
You're welcome
Thank you it really helps me a lot and save money
I'm at the point where the PDR glue has left a thin see-through residue on my car. Will this still work with alcohol soaks and using a rubber or plastic spatula? I really want to avoid rubbing the residue off with a cloth or a tissue. I find that using a hair blow dryer has made it worse and spread over more surface
It could possibly be because it is a cheaper glue. Yo may need to try a combination of some heat and the rubbing alcohol to remove it.
If all else fails, I’d add a heavier glue layer that encompasses the bits…then use this proper removal method after its fully set…use lots of alcohol. I’d imagine that would pick up all the bits as they will melt into the fresh glue🤔
Great video
Will any hot glue stick work or do you need a specific type for dent removal?
When I started using glue to pull out dents I was using just some regular glue from store. It worked. There are now much better and different formulas of hot glue that are just for paintless dent repair.
They are made for different temps and pulling power.
Thanks for the tip
Thank you! This too saved me!
You're welcome!
would using a heat gun on the stuck on glue be advised to help remove stubborn glue?
Yes. If the glue is hard or brittle. It can help to soften it. Just start slow and don’t overheat the area or it can burn the paint.
Thanks
Your Welcome!
I tried this today but still did not take the off like it does for you any idea or is the glue different you use
99% or denatured alcohol/acetone mixture in a spray bottle
For the begginers :-)
+Lukas Chalat Yes. More for people wanting to know how to remove the hot glue.
I did want to test out the new 99% that I got and see how it compared to the 91%.
I got quesiton urgent my car have 7 or 8 drops paint oil this points... how remove this not damage paint fábric
If the damage is to the fabric, it might be best to check with a car interior repair company for the best way to remove it.
thanks for sprinkling me man!
Wonder if methylated spirits would do the same job?
Yes it would. We used to use that or known as denatured alcohol. But because it was more toxic and many would be using it often and getting on their hands. They switched to regular 91% rubbing alcohol.
Thank you, alcohol is proper idea
Can hot glue damage The car's paint work?
Yes, if not done properly or with glue made for car paint. There can be times where the paint can be damaged.
Also wouldn’t recommend hot glue be used on a car that had been repainted. There is much more risk of paint damage or pulling the paint off the car.
I work with 99.9% alcohol all time doesn't damage my skin
Can I use this on plastic surface ?
You can. But I’d test a small spot first before applying the rubbing alcohol. It can discolor or affect the plastic.
@@exceldentremoval noted. Thank you...
Where to buy dent puller like you have ?
Dent Craft Tools carries a few models including this one I use.
www.dentcrafttools.com/glue-tabs-glue/slide-hammers-mini-lifters.html
I got a set for sale from a1 tool if you're interested?
I put super glue in the car handle because it was getting loose and now I can't open as it got in between the crevices. I poured acetone but it's not working.
Did you try a sledgehammer? If in doubt, use the really big one.
Lol. That's why I'm here.
Is there a product to use that is not alcohol based? I can't touch or breath fumes of alcohol.
I don’t know of any other product that doesn’t have any fumes that would be strong enough to work but also save for car paint.
The couple option would be to wear gloves and put the product in a dropper bottle. Very little is needed for the release process to work.
The other option would be to use a special PDR glue that is made to not need a release agent.
Another way could be just to heat it up slightly and peak off. Though it may become gummy.
anyone know how to clean the tabs of the glue?
The same method and materials are used to clean the glue off of the tabs.
If you are having trouble with the glue sticking to the tabs and want to clean them first. Then you can still use the rubbing alcohol to help remove any residue from the tabs. Also some light sand paper may also help to clean the tab surface for better adhesion.
@@exceldentremoval I thought my car was trashed, but first time and my car looks great in just a few hours work. 20 hail marks gone. I soaked these tabs overnight but glue stays in the ridges, next ones i will buy without ridges. thanks.
Yes, the smooth tabs seem to work better. I've found that you want to remove the glue from the tab right away after using it. Any longer time that it stays on it makes it more difficult to remove.
If there is still some bits of glue on the tab. You can still use it again, the additional glue will heat it up and make it easier to remove. OR just use a small pick tool to help get it out of the grooves.
Truth is, when you open the bottle alcohol will be after while 96% from air moisture.
my bmw badge was falling off, i put to much superglue on it and now its a mess, can i use alchool to remove the excessive glue without damaging the paint? its a pristine car that i saved for more than 5 years to buy it, already when to 2 mechanics that really didnt do paint, but both told me i have to paint the whole front bumper... Im really pissed off with this and know if i find a good painter will help me as paint the whole front of the car its to expensive. right now im looking at either trying the alcool, or nail polish remover, already tried to polish it to remove it for hours and i think i made it worse... because i really dont have the professional polish, just a cheap polish and some wd40... wish somebody would help, the 2 mechanics in 2 differents shops just laugh at me and tried to overprice everything because its a 520d bmw... reality is that i'm a young person with a normal job and cant afford painting the front of the car, does anyone know what i can use without damaging the original paint???
did you ever find a solution?
Use alcohol
I didn’t use a car but I used a wooden desk
To pull a dent in wood?????
@@SSS-cp1op no to get the hot glue off XD
Easiest way to get the glue off is with a regular hair dryer. Comes off easily.
Bro how to remove fewi kwik from car pls help pls reply bro
@@krishnasharma774 What worked for me was applying heat from the hair dryer and scraping it with a plastic credit card. At least this was effective on the brand of hot glue from my "Ding King" kit. I would not use anything stronger than a hair dryer out of concern that the paint may be damaged.
@@69indian70 ok bro i will try thank you for giving reply to me
Acetone
Do NOT tell ppl to use Acetone😒
Acetone compromises your paint at the very least and can remove it. Hence it is used as nail polish REMOVER 🤦🏼♀️
7 minute video could be explained in 20 seconds