Haha, instead of having 55 hp, it probably has like 57hp. But honestly the best thing to do would have been to swap the trans to a 4.39 which is on the 96+ 3cyl metros. That one has a 4.10. Also, for anyone that doesn't know, the predecessor to the metro was the chevy sprint. They had a turbo model. This video was cool though.
Note to any Metro owner out there... If you dont have an A/C compressor in the way then a bigger WIX 51515 oil filter will screw right on. Cross reference it if needed. Probably holds an extra quart of oil over some the regular little pancake filters the Metro calls for
You need a boost control valve. It's pumping too much boost at idle. If you can regulate it, It'd run like a champ. I'm definitely subscribing by the way!
Awesome to see someone actually put a sloppy turbo setup on a Metro just using a lot of the stock N/A shit. Ik some of the 3 cylinders came factory turbod. If you can grab one of them manifolds or even make your own that could really open things up. I know yall have the skill lol. Keep up the good work.
Sounds like your throttle response needs adjustment. 2 turns out on the air/fuel mix and advance your timing manually until your throttle response is dialed in. A quick up and down is all you need. I see you have the stock Tach so you 'll be golden. Also swap your front brake calipers to a 4cyl. Swift setup with the spindles. Stops a bit better. Have fun bois!
Love watching all the videos you guys post. Decided to break down and buy a geo metro now. How much would you guys charge to make the pipe from the top of the carb to the turbo mount?
Yea I was thinking that's kinda high at first but with strong internals and all the boost it could probably make 150hp a cylinder hahaha I wonder if this engine is even a 1.0 liter or what haha
Now it needs an eBay BOV. Maybe a fake HKS or fake Tial. It definitely needs a downpipe of some sorts. I know this was made a while ago, but the BOV, FMU, and downpipe is a necessity.
Was actually a fun video and y'all knew it's was probably a fail but ya made it fun and funny. Cause don't no body turbo a 1.0 3 cyl.. lol. Grammar is supposed to be this way btw. Keep it up I liked it
i always wanted to do it but i haven't the courage. You guys are hero's. Do you thinks if i do it on my stock old car it'll destroy the engine? Sorry for my bad english :(
Doubt you'll see this on a video this old, but what did you do for management? And map sensor mods? Timing? Fuel? Nothing?? I want to slap a turbo on my Mazda 626 just for the sound,make maybe 3-5 psi just wondering if I can do that with no other mods
If all you wanted was turbo noise, you should have rigged a switch to the throttle so that when it is WOT, have an MP3 automatically play the noises through an amplified horn.
The Hayden & Charlie bonding experience
commackmk3 😂
urbex2007 😂😭
commackmk3 dick head wonders why he got kicked knob
Where tf is charlie? he stopped postin vids on his channel
ye.
Dude this is like BoostedBoiz behind the scenes keep the lengthy videos up I love listening to 'yall talk and work
thanks man
ricerocket_ed6 this is a boostedboiz video
Haha, instead of having 55 hp, it probably has like 57hp. But honestly the best thing to do would have been to swap the trans to a 4.39 which is on the 96+ 3cyl metros. That one has a 4.10. Also, for anyone that doesn't know, the predecessor to the metro was the chevy sprint. They had a turbo model. This video was cool though.
Dude that thing sounds unreasonably badass, plus it seems to spool so fast. So cool.
Note to any Metro owner out there... If you dont have an A/C compressor in the way then a bigger WIX 51515 oil filter will screw right on. Cross reference it if needed. Probably holds an extra quart of oil over some the regular little pancake filters the Metro calls for
practically it's a diesel now lmao. 😂
First time I've ever heard someone describe a Geo metro as badass
Doing drive-bys at 2 am.. Fucking legends dude!
haha sounds sick! I think they are called Suzuki swift's here in the UK. top work lads
thanks!
suzuki swift or the 4wd one is subaru justy.
Some of these little 3 cylinders came factory turbod and intercooled. Check it out.
Its slower than a standard geo now hahaha
Y'all did a bang up job on this. Totally doing this to my Geo.
Congrats on making it over 1,000! I'm sharing this on the latest BoostedBoiz video to get it out there more.
802 Garage sweet thanks man 😎
I just got done putting a turbo on my 1.0 metro. Glad to see other people doing it.
Pulls at 2 a.m infront of your iwn house......Sounds like my kinda ppl
a village for people like this.
when can i move?
Love seeing what you guys are up to. Thanks for sharing!
The joy of building something your selfs it has no price ,that's me too past midnight working on my build🤘
Love the shot of the bong in the video.lol
The hooka makes all this make more sense...lol Nice work boys.
You need a boost control valve. It's pumping too much boost at idle. If you can regulate it, It'd run like a champ. I'm definitely subscribing by the way!
ya, having the exhaust blow directly on the rad is probably a good way to make it cool properly . also needs less timing.
This actually sounds sick lol seems like it turned out badass!
This is like watching the movie Goonies but the mechanics version ...love the shit you cats do..nothing but fun!!!!! Awesomeness subbed.
Awesome to see someone actually put a sloppy turbo setup on a Metro just using a lot of the stock N/A shit. Ik some of the 3 cylinders came factory turbod. If you can grab one of them manifolds or even make your own that could really open things up. I know yall have the skill lol. Keep up the good work.
it looks like something like a screw or whatever is actually flying off at 6:56
dude the neighbors must love you guys...
Laughed for a good minute. Thanks guys!!!
That's dope af that looks like a ton of fun
Good video bro. I'm glad somebody got footage of the install
thanks man!
SuicideCRX no problem man!
Sounds like your throttle response needs adjustment. 2 turns out on the air/fuel mix and advance your timing manually until your throttle response is dialed in. A quick up and down is all you need. I see you have the stock Tach so you 'll be golden. Also swap your front brake calipers to a 4cyl. Swift setup with the spindles. Stops a bit better. Have fun bois!
Lol I love the oil mixture. I do the same to my old beaters.
The turbo spooling sounds so sick haha
Nothing is better than hot exhaust gases blowing straight on the radiator xD
That thing was running lean af but still really cool project :D You should redo it properly
All that sound and absolutly NO go 😂
Good work boys. Hayden, good to see you're on RUclips buddy. Just gained a sub for life.
Hellrot Garage hell yeah, thanks man!
This thing is sick, I love it... I need one now
sweet. I'll subscribe just because you showed a clip of it running lol.
You officially raised the power of your geo from 5hp to 6hp !! Lol
12:00 That ratchet and extension is bigger than the car lol. Keep up the good work!
You are doing God's work. Keep it up!
2:16 charlie : oh noh out of chicken
BAHAHAHAHAHAH!!! im laughing so hard
I love how it sounds like your going fast but it's actually slow lol. It is more fun to drive a slow car fast then to drive a fast car road speeds
Love watching all the videos you guys post. Decided to break down and buy a geo metro now. How much would you guys charge to make the pipe from the top of the carb to the turbo mount?
aha hah finally added loving all the new updates keep us posted on the v8
You guys should really build it and make like 400-500 whp hahahaha super sleeper
400 HP out of a 3 cylinder from the 90's. Hot damn that would be intense. XD
Yea I was thinking that's kinda high at first but with strong internals and all the boost it could probably make 150hp a cylinder hahaha I wonder if this engine is even a 1.0 liter or what haha
Yeah it could be done, but would probably need way too many supporting mods as well.
You know how we roll we've got something planned 🤔
they are a 1 litre so people do gsxr 1000 swaps. Turbo at 10psi I think people are making around 85-90hp, stock it's about 50hp at the crank.
Now it needs an eBay BOV. Maybe a fake HKS or fake Tial. It definitely needs a downpipe of some sorts. I know this was made a while ago, but the BOV, FMU, and downpipe is a necessity.
Dude I swear Charlie looks like he should be on a list
Oh you guys are awesome 😂 😎
Classic! Realizing you've blocked access to the oil dipstick AFTER fabricating the intake piping!!
best build ever !
TBI = carb with an injector in it.
Or traumatic brain injury
Hey hayden, i'm starting to like your videos. Keep uploading bro 👍👍👍
Thomy Prasetyo thanks man!
You guys are my f*cking heros
Awesome another upload. What's good Hayden.
Lol the hookah.
Dudes, SICK!
Nice video guys.
Was actually a fun video and y'all knew it's was probably a fail but ya made it fun and funny. Cause don't no body turbo a 1.0 3 cyl.. lol. Grammar is supposed to be this way btw. Keep it up I liked it
Shit...... bout 8 months late. Smh
Like the concept, what else you got for the Geo? Gives me the idea to do this to a murcury cougar!
Nice stuff dude! Subbed. Keep it technical! and you guys should get another one, and try and put a turbo riding mower engine on it.
awesome video keep up the amazing work,God Bless!
Who’s still watching this in 2021
Fuck yeah! Keep the vids coming man! Its like 2 boostedboiz channels now🔥
i always wanted to do it but i haven't the courage. You guys are hero's. Do you thinks if i do it on my stock old car it'll destroy the engine? Sorry for my bad english :(
editing is getting a lot better man
thank you man! I'm trying lol editing and film making is not my strong suit
Doubt you'll see this on a video this old, but what did you do for management? And map sensor mods? Timing? Fuel? Nothing?? I want to slap a turbo on my Mazda 626 just for the sound,make maybe 3-5 psi just wondering if I can do that with no other mods
Yeah neighbors are pissed about now haha
Ayy. I'm from Elbert Co but I got the 4 cyl auto. Wanting to turbo it and that definetly helped alot. I guess I'll see you guys around one day
You know what this is like, basically?
Gold spraying a turd.
That shit is on point.
This is fucking awesome. It doesnt look like it got much faster though lol
badass you guys are awesome it does sound sick
thanks man!
thanks man!
where I live these are 200-700. I am honestly thinking about getting one.
That oil combination XD
Like your work
Damn. If you guys can pull it off this easy. Maybe I should too.
HAHAHAHA, boostedboiz behind the scenes, kyles hatch included
I'd love to see how you got the oil feed set up.
If all you wanted was turbo noise, you should have rigged a switch to the throttle so that when it is WOT, have an MP3 automatically play the noises through an amplified horn.
You guys are hilarious!!😂😂😂🤣🤣
Boostedboiz 2.0, second favourite channel 😃
Was there increase of power ?
horneproject of course he put a turbo on it lol
Probably like 10-20 horse off waste gate pressure
That's nuts. Really cool though. Just curious about the stock manifold setup though
Apples yo what's your questions about it?
how did you guys modify the stock manifold for the turbo?
sicckk haha it looks noticably faster
you can definitely feel the difference ;p
12:50 You hear that shit you look dayumm what's going fast you look and it's going 20 mph
If all you wanted was the waste gate noise, just hook up the exhaust side and let the compressed air dump under the car or something.
Nice Video.
Careful man, you might get a ticket for going that slow... 😁😁😁
some tasty butter
This may be the first time anyone said a geo metro is sick, dope, or badass
you guys should take the geo to the Dyno!
Were just trying to make turbo noises
i loved this video!! nice one gayden keep it up.
Dengaz thanks man!
urbex2007 lol this was after kyle went to sleep & I enjoyed it, so did a bunch of other people. yous just a Hayder
are the Jets upgradable or can you just put a bigger single barrel on it to get more fuel
I miss old boostedboiz I like them still but I’m glad I barely found this channel
Boost leak causing the sputter? If it runs too lean it will buck not sputter.
Fox, I am not going to do a naturally aspirated h2b. More on making the mini-me more realistic! And no. I'm not stoned right now :-(
it sounds so freaking good but it hardly moves😂😂😂😂
Raise the pressure at the "carb" there is a presure regulator if yoy put pressure in the manifold it cannot inject enough fuel.
Did it overheat since there’s no intercooler ?