Thank you for this solution. Thank you also for being the best Star Wars figure channel on RUclips. Always consistently good vibes and no drama. We think we actually were stood near you at Star Wars celebration, as we thought we recognised your voice. MTFBWY
What a great and simple fix! And the added bonus is that the top parts of Baylans’ legs can be used on Reva in return, with no blatantly obvious difference.
Would the Count Dooku legs possibly work for Baylan? Christopher Lee only stood 2 inches taller than Ray Stevenson so it could be fudged together I think
Thanks for sharing, a tip on how heat up these figures. You can also heat up the water, then transfer the water to a new container (to prevent burning with the bottom of the pot you just used to heat up the water), place the figure in a ziplock bag, then place the bag in the hot water, that way you prevent discoloration that can happen from the direct water contact (in case you are just heating up joints on new figures etc.) and your figure won't be wet. Thanks again for sharing.
Super creative solution! It's pretty ridiculous that we have to fix a problem that really shouldn't be one for a big company like Hasbro. I can't really imagine Hasbro using resources to retool these, and even if they were to rerelease these figures, who knows when or if that'll happen, so for now, this solution will do! Hoping Mafex or Figuarts will release much better looking versions of these characters!
They talk so much about how they want to improve the figures, but they do stuff like this. Impressive and creative solution to the fixes! Unfortunate you'd have to do this in the first place, but it looks great
Couldn't wait to get mine in the mail, got my Reva and Koska a few days ago. Immediately did this leg swap and the difference is incredible. Thanks so much for putting this together.
I used Fourth Sister for Shin. The color matches perfect and her blades are a bit more orange so it fits nicely on both of them. I did add a bit of black tac in the actual socket for the lower leg though to add friction, it's a loose fit otherwise. For Baylan I did it the hard way and cut his legs at the thigh, cut off a chunk of thigh from a different fodder figure and glued that in between the Baylan cuts, basically adding a slab of plastic to his thigh length to make him taller overall. There's probably an easier way but this works for me lol.
Just used a 5th brothers legs and saber for Baylan. The boots look good, and he has more height. Used the microwave method for heating the water and it worked a treat.
Awesome video. I'm going to go ahead and get the Koska Reeves and Reva so I can do this the minute my figs arrive from Hasbro Pulse. I hate that we have to do it but at least now I can put them on display instead of just keeping them in their boxes. Thanks for the fix!🤘
Amazing job! To think, last night I cancelled my pre-orders, thinking I can wait a couple years for these to be redone/corrected by Hasbro when the next season/show comes out. Maybe now I’ll actually pick them up if I find them in the wild.
Great ideas Luke! But I was thinking of adding the Stevie Nicks idea of platform Boots (on Baylan), as I dont want to destroy my Reva, and shes still too expensive to buy another one at this stage. I think Shin's face is terrible, Lets hope someone customises a better face at some stage hint hint Thanks mate, once again your videos are amazing, all the best from New Zealand!
Thanks Luke for this video. I would honestly wait a year or so if Hasbro would deliver our figures with correct scaling and great sculpt likenesses. Thanks for explaining how to swap out the legs and the best figures to use for each. Take care from your friend Tom
Thank you so much for the easy fix. It definitely helped my Baylan figure a lot. I can't believe that we got this figure like this and had ti fix it. I will fix Shin after I receive her.
Yo thank you so much for this, I just so happen to have a spare Reva I bought for $6 to give the split sabers to my emperor. Looks like I’ll need to get another Koska. I legit just preordered Baylon and Shin because of this video
@@gunnar83 great idea, I still have that spare figure’s regular lightsaber that isn’t split. I really want to know what happened with Baylon during production
Thanx Luke for sharing, I would have def thought to do the same, but wouldn't have known to use Reva for sure! Years ago I fixed the CW season 5 Ahsoka's height by using Qira's thighs and grinding down the boots until they are flats.
Fantastic video, not that we should have to do this to our figures but guys like yourself come up with these great fairly easy mods for us to try. Thank you!
Looks much better but I feel like part of the problem now is that Sabine is too small. Natasha is 5’7, same as Rosario, and Ivanna and Mary Elizabeth are both 5’8 so those 4 characters should all be around the same size as each other.
Thanks! Btw, could you tell us if the Fennec Shand thighs could work as well for Shin Hati's height fix? Fennec is a short figure and is currently on bargain in here
They work well actually but the knee peg is a little loose. I ended up switching to Fennec’s legs on mine and using black tack to stuff the peg a little.
Hey, was wondering if my the 4th sister inquisitors legs would work more in scale as Shin is slightly taller than Sabine. Thought it might be good to pick one up because it could give shin better height while also providing an orange blade for Baylan. (EDIT) I found that the Mando Luke Legs work perfectly
Will you make a video explaining how you fixed Huyang? I tried doing some acrylic painting the other day to a Marvel Legends figure and failed miserably
My favorite Star Wars (The Mandalorian) engineers/mechanics, Babu Fric, Kuiil, Peli Motta, and last but not least, LL. Great solutions LL. I assume that Hasbro will fix the problem eventually like they did with the Boushh Leia figure but in reverse (her legs were originally too long). Have you thought of making a custom figure of the Jedi youngling that asked Master Skywalker, “What are we going to do, there are too many of them,” during the massacre at the Jedi temple? The new 6” preorder child Anakin got me thinking of a lot different custom possibilities.
Honestly might poke around for some fodder figs while i wait for these to go on sale. Shin will be my first custom head too, since they did such a good job
I changed Baylan’s height with Reva, legs but now that I replaced them I think he is a bit unstable and the plastic feels soft. Any tips to make the figure hard again?
IDK if it's because of a retool or Luke just didn't see fit to mention it (I have an orange saber Baylan), but putting Baylan's thighs on Reva left her floppy at the hips AND knees. Soaked her in ice water for 10 minutes thinking maybe the plastic hadn't cooled down, nope, still floppy. Just FYI.
Great job man! I really have tried to be less critical of figures because ultimately I love most of them… but these two really should not have made it out of quality testing/approval at the developer stage. The fact they went to production and were released like this is dumbfounding. Regardless, I’m definitely going to use these fixes as a start. I think I’ll try to modify Shin’s robes a little because once she’s dropped down she looks a bit bulky. I’m definitely going to creat new hair with Apoxie sculpt. Thanks for putting this out! 👍🏻
Great tip/hack. Although, this means I have to buy a Reva and Sabine (which are characters and figures from live action whom I have no interest in at all). None of them are on sale here, so it's full price for two extra figures just to do this. They are already expensive here, compared to in the US, due to import taxes and stuff. Baylan looks great with this method. Shin looks ok from waste and up, but this hack makes her lower part dress/skirt looks way too long (like some massive long skirt), and boots barely visible, not proportional at all, so I'm not sure. Both an expensive and not ultimate solution, but still a "fix". Maybe I'll just do the Reva/Baylan fix and let Shin be. Not sure if that makes Baylan looks at least a bit taller than Shin? A hard decision. Then depending on which versions I get from my pre-order, I'm not sure if they will have red or orange sabers. Which means I might need to try and get another Shin just for the shorter orange saber to fit Baylan, if not one might have a red and the other an orange saber which will look weird. What a mess. Hasbro should have just gotten this right, but alas. The only two characters I found intresting in the Ahsoka live action series and of course they had to get them wrong.
@11:46 given how many times Hasbro has had inexcusably bad scaling issues that absolutely ruined figures (R2-D2, IG-88/11, among others) there’s zero reason they can’t get a picture emailed to them of each figure standing to the right of a ruler (with US Inches and centimeters for the rest of the world) with a Luke Skywalker on the left of the ruler (presumably Luke is the reference figure, but whatever they use!). Straight on facing the camper and another with the figures standing sideways. This could be a fast way to avoid such scale issues if the shipment of the physical prototypes or first passes or whatever they are called takes too long. If it’s a close match, great! If it’s significantly off the. You caught it and can fix it. Can’t believe they don’t do this (if they Do, the. It’s even worse because it means they allowed these lapses in judgement to happen!). There’s other figures that are too big (Bossk, Boush Leia tho they at least modded her for the archive). There’s others with less obvious scale issues, but this would be a great way to quickly identify issues and correct them lest we have to wait another 10 years to get a fixed accurate figure like the awesome R2 or however long IG-88/11 will take (thank goodness for Figuarts and Mafex who had stellar R2’s and IG-11’s and still beat Hasbro’s!).
Brilliant fix! I was wondering if other hasbro lines are compatible for part-swapping (Marvel Legends, Power Rangers or G.I.Joe)…I’ve haven’t done a lot of modifications, but I will for this……it’s too egregious….
@@LandspeederLukeI agree with Samuel. Actually collectors should give a hard pass on such messed up figures (eg in contrast to some colours being off a bit) as a direct feedback. The fix is brilliant though and most certainly both of your vids should create enough buzz to make Hasbro’s designer team aware.
The Baylan fix is so creative way to solve his height issues im impressed
Thanks!!
Ridiculous that you'd have to do this in the first place but I like the easy nature of this fix! Excellent video, Luke! -Justin
Thank you for this solution. Thank you also for being the best Star Wars figure channel on RUclips. Always consistently good vibes and no drama. We think we actually were stood near you at Star Wars celebration, as we thought we recognised your voice. MTFBWY
😮
What a great and simple fix! And the added bonus is that the top parts of Baylans’ legs can be used on Reva in return, with no blatantly obvious difference.
Baylan with Reva’s legs is cursed
Never look under a kilt
Bro sure never skipped leg day
Not a chance :D
Give's him 50% resistance to lightsaber damage tho
Would the Count Dooku legs possibly work for Baylan? Christopher Lee only stood 2 inches taller than Ray Stevenson so it could be fudged together I think
Thanks for sharing, a tip on how heat up these figures. You can also heat up the water, then transfer the water to a new container (to prevent burning with the bottom of the pot you just used to heat up the water), place the figure in a ziplock bag, then place the bag in the hot water, that way you prevent discoloration that can happen from the direct water contact (in case you are just heating up joints on new figures etc.) and your figure won't be wet. Thanks again for sharing.
Ooh clever thanks!
Very well done Luke! Great solution. As I commented before, I’m not TOO upset over the stock figures, but this is a DEFINITE improvement.
tiny bo katan sitting in the pot wearing sabines armor really cracked me up
Great job! Shin & Baylon standing next to each other looks so much better now! (And Shin/Sabine too) 👍🏻
Super creative solution! It's pretty ridiculous that we have to fix a problem that really shouldn't be one for a big company like Hasbro. I can't really imagine Hasbro using resources to retool these, and even if they were to rerelease these figures, who knows when or if that'll happen, so for now, this solution will do! Hoping Mafex or Figuarts will release much better looking versions of these characters!
They talk so much about how they want to improve the figures, but they do stuff like this.
Impressive and creative solution to the fixes! Unfortunate you'd have to do this in the first place, but it looks great
Looks great! Could post a video if you repaint Shin? I wanna see her with a wash or something
Couldn't wait to get mine in the mail, got my Reva and Koska a few days ago. Immediately did this leg swap and the difference is incredible. Thanks so much for putting this together.
Dremel, then insert dowels. Then seal with polymer clay, sculpt pants texture. Repaint. Done
Really nice job, they all look great together now! Funny how a little change in height makes such a difference.
I used Fourth Sister for Shin. The color matches perfect and her blades are a bit more orange so it fits nicely on both of them. I did add a bit of black tac in the actual socket for the lower leg though to add friction, it's a loose fit otherwise. For Baylan I did it the hard way and cut his legs at the thigh, cut off a chunk of thigh from a different fodder figure and glued that in between the Baylan cuts, basically adding a slab of plastic to his thigh length to make him taller overall. There's probably an easier way but this works for me lol.
Thank you for having the passion to do this for us. You are a true brother
Just used a 5th brothers legs and saber for Baylan. The boots look good, and he has more height. Used the microwave method for heating the water and it worked a treat.
I was about to ask if that would be a better swap
I used Gideon for Shin and the Knights of Ren for Baylan.
That is a HUGE improvement
Awesome video. I'm going to go ahead and get the Koska Reeves and Reva so I can do this the minute my figs arrive from Hasbro Pulse. I hate that we have to do it but at least now I can put them on display instead of just keeping them in their boxes. Thanks for the fix!🤘
Great idea on the leg swap. They look much better. Thank you for sharing.
Amazing job! To think, last night I cancelled my pre-orders, thinking I can wait a couple years for these to be redone/corrected by Hasbro when the next season/show comes out. Maybe now I’ll actually pick them up if I find them in the wild.
Great ideas Luke! But I was thinking of adding the Stevie Nicks idea of platform Boots (on Baylan), as I dont want to destroy my Reva, and shes still too expensive to buy another one at this stage.
I think Shin's face is terrible, Lets hope someone customises a better face at some stage hint hint
Thanks mate, once again your videos are amazing, all the best from New Zealand!
This worked so well. The figures look like the perfect height in your shots. Much more like they appeared in the show.
Thanks for the tips, very convincing fix! (For Shin, I guess it's working with Bo-Katan legs also?). Love your videos and dioramas
Nice work man! Pretty much what I had in mind, just hadn't worked out which figures to use.
Bonus got hasbro, any Reva's left over will sell now haha
Most excellent. I really love the design with Marrok and was disappointed with these two, but you have really changed my mind on that!
Been waiting for this video, can't believe i'm the first one to actually watch it!!! Thanks Landspeeder Luke, you're one of the best!
Thanks Luke for this video. I would honestly wait a year or so if Hasbro would deliver our figures with correct scaling and great sculpt likenesses.
Thanks for explaining how to swap out the legs and the best figures to use for each. Take care from your friend Tom
Thank you so much for the easy fix. It definitely helped my Baylan figure a lot. I can't believe that we got this figure like this and had ti fix it. I will fix Shin after I receive her.
Yo thank you so much for this, I just so happen to have a spare Reva I bought for $6 to give the split sabers to my emperor. Looks like I’ll need to get another Koska. I legit just preordered Baylon and Shin because of this video
You could use one of revas saber blade to swap with Baylon too its so perfect
@@gunnar83 great idea, I still have that spare figure’s regular lightsaber that isn’t split. I really want to know what happened with Baylon during production
Thanx Luke for sharing, I would have def thought to do the same, but wouldn't have known to use Reva for sure! Years ago I fixed the CW season 5 Ahsoka's height by using Qira's thighs and grinding down the boots until they are flats.
Fantastic video, not that we should have to do this to our figures but guys like yourself come up with these great fairly easy mods for us to try. Thank you!
This is a crazy good improvement 👏 I was afraid there would be no saving them
Wow that worked really well! They look great now
I’m still about 3 weeks off getting Baylon. The amount of fixing needed gives me pause. But I love your solution. Definitely food for thought.
😂😂😂 hack unlocked. Stands up to buy a new Reva and Bo-Katan figures for the custom.*
Looks great!! the heads definitely need a dark wash though.
I was thinking about swapping Baylan and Marrok’s legs. I don’t have Baylan yet though.
Marrok’s thighs are smaller
Looks much better but I feel like part of the problem now is that Sabine is too small. Natasha is 5’7, same as Rosario, and Ivanna and Mary Elizabeth are both 5’8 so those 4 characters should all be around the same size as each other.
Fantastic work. Whoever's in charge of this line clearly has no true love for SW. Great fix! ...double the cost though haha. Thanks for sharing.
YOU ARE LEGENDARY!!!
THANK YOU
That is hilariously awesome dude! Great solutions! Thanks so much for sharing it!
Thanks! Btw, could you tell us if the Fennec Shand thighs could work as well for Shin Hati's height fix? Fennec is a short figure and is currently on bargain in here
They work well actually but the knee peg is a little loose. I ended up switching to Fennec’s legs on mine and using black tack to stuff the peg a little.
Nice to know that boil and pop works with Black Series figures...found out the hard way it doesn't with VC figures. But great job on both of them! 👍👍
Reva character might actually boost in price after this hack goes viral lol
Loved your Baylan idea, you nailed it. Shin's skirt looks too long now, though.
As someone who's never customised figures this is a really non customizer friendly fix, i might actually have to do this!
Nicely done. When mine show up I'm inclined to give this a try. Thanks for the tip!
Hey, was wondering if my the 4th sister inquisitors legs would work more in scale as Shin is slightly taller than Sabine. Thought it might be good to pick one up because it could give shin better height while also providing an orange blade for Baylan. (EDIT) I found that the Mando Luke Legs work perfectly
Will you make a video explaining how you fixed Huyang? I tried doing some acrylic painting the other day to a Marvel Legends figure and failed miserably
Bo Katan needs to lay off the sauce. She was definitely channeling the spirit of BSG Starbuck from the reimaged series 😂
My favorite Star Wars (The Mandalorian) engineers/mechanics, Babu Fric, Kuiil, Peli Motta, and last but not least, LL. Great solutions LL. I assume that Hasbro will fix the problem eventually like they did with the Boushh Leia figure but in reverse (her legs were originally too long). Have you thought of making a custom figure of the Jedi youngling that asked Master Skywalker, “What are we going to do, there are too many of them,” during the massacre at the Jedi temple? The new 6” preorder child Anakin got me thinking of a lot different custom possibilities.
Might have to do that when my figures come, although I think I'll keep Baylan's blade with him. Looks too off with a red lightsaber to my eyes
Looks waaaay better. Nice job.
Wow!!! Luke you are a clever man!!! 😊
Love these videos about painting Very helpful 👍🤘
Three videos in two days 0: we eating good
Wow, those look so much better, awesome job!!! 🙂👍
Aaaaaand now I’m excited for them again. Glad I didn’t cancel my preorders yet. Leave it to Luke to find a fix!!!!
Babylon still looks like Rhett from Good Mythical Morning.
Brilliant fix. I'll have to try it once I get mine (and assuming I can source the needed figures at a decent price here overseas).
Honestly might poke around for some fodder figs while i wait for these to go on sale. Shin will be my first custom head too, since they did such a good job
I wonder if Fennec Shand's thighs would work for Shin? They're black like the tops of her lower legs, and Fennec is fairly short too
Im thinking about using greef karga for the legs, for the blades im gonna swap un the 4th sisters blades. Theyve got that slight orange tint
I changed Baylan’s height with Reva, legs but now that I replaced them I think he is a bit unstable and the plastic feels soft. Any tips to make the figure hard again?
The price for Reva is about to go up. Lol
Great idea, Luke! Thanks for sharing!
IDK if it's because of a retool or Luke just didn't see fit to mention it (I have an orange saber Baylan), but putting Baylan's thighs on Reva left her floppy at the hips AND knees. Soaked her in ice water for 10 minutes thinking maybe the plastic hadn't cooled down, nope, still floppy. Just FYI.
That's awesome!! Yeah this is so much better
Can you also tell us how’s Reva with Baylen’s leftover legs looks like? Will she be noticeably short and weird or is she still looks ok?
Looks so much better !
Can you please give a walk though of the 3d printers you use?
Great job man! I really have tried to be less critical of figures because ultimately I love most of them… but these two really should not have made it out of quality testing/approval at the developer stage. The fact they went to production and were released like this is dumbfounding. Regardless, I’m definitely going to use these fixes as a start. I think I’ll try to modify Shin’s robes a little because once she’s dropped down she looks a bit bulky. I’m definitely going to creat new hair with Apoxie sculpt. Thanks for putting this out! 👍🏻
the baylan fix is great. the shin height thing i don't really care about as much but baylan looked completely ridiculous. nice woik
Great job! Looks way better.
I’ve never done the boil method before. Will this mess up the figures parts at all? Such as making them very loose forever?
thanks for this tutorial man... i haven't actually opened up my figures since i just got them... but man... the scale... smh
looks really nice, but i think baylan torso should've been bigger and wider, ray was a colossal unit
Amazing work
My MAN!
A bit late but would it be possible to use some indiana Jones figures for Baylan ?
Great tip/hack. Although, this means I have to buy a Reva and Sabine (which are characters and figures from live action whom I have no interest in at all). None of them are on sale here, so it's full price for two extra figures just to do this. They are already expensive here, compared to in the US, due to import taxes and stuff. Baylan looks great with this method. Shin looks ok from waste and up, but this hack makes her lower part dress/skirt looks way too long (like some massive long skirt), and boots barely visible, not proportional at all, so I'm not sure. Both an expensive and not ultimate solution, but still a "fix". Maybe I'll just do the Reva/Baylan fix and let Shin be. Not sure if that makes Baylan looks at least a bit taller than Shin? A hard decision. Then depending on which versions I get from my pre-order, I'm not sure if they will have red or orange sabers. Which means I might need to try and get another Shin just for the shorter orange saber to fit Baylan, if not one might have a red and the other an orange saber which will look weird. What a mess. Hasbro should have just gotten this right, but alas. The only two characters I found intresting in the Ahsoka live action series and of course they had to get them wrong.
I’ve seen others use Moff Gideon to fix Shin this way as well.
Incredible!
Would Kylo Ren legs work to make Baylan taller?
Awesome job on the fixes!
Great work! Love the kit bashing advice! 🤜🤛
@11:46 given how many times Hasbro has had inexcusably bad scaling issues that absolutely ruined figures (R2-D2, IG-88/11, among others) there’s zero reason they can’t get a picture emailed to them of each figure standing to the right of a ruler (with US Inches and centimeters for the rest of the world) with a Luke Skywalker on the left of the ruler (presumably Luke is the reference figure, but whatever they use!). Straight on facing the camper and another with the figures standing sideways. This could be a fast way to avoid such scale issues if the shipment of the physical prototypes or first passes or whatever they are called takes too long. If it’s a close match, great! If it’s significantly off the. You caught it and can fix it. Can’t believe they don’t do this (if they Do, the. It’s even worse because it means they allowed these lapses in judgement to happen!). There’s other figures that are too big (Bossk, Boush Leia tho they at least modded her for the archive). There’s others with less obvious scale issues, but this would be a great way to quickly identify issues and correct them lest we have to wait another 10 years to get a fixed accurate figure like the awesome R2 or however long IG-88/11 will take (thank goodness for Figuarts and Mafex who had stellar R2’s and IG-11’s and still beat Hasbro’s!).
Brilliant fix! I was wondering if other hasbro lines are compatible for part-swapping (Marvel Legends, Power Rangers or G.I.Joe)…I’ve haven’t done a lot of modifications, but I will for this……it’s too egregious….
Sometimes but the engineering and joints are different across lines
Would a Vel Sertha thighs work to replace koska?
That’s awesome I’ll have to pick up the other figs
How dare you boil Sabine!
;) jk Nice fix for Baylan. Thanks for sharing. -YL
Do we think there’s any chance Hasbro would fix these? I love these characters but they are so messed up I might cancel my preorders
Not this particular release but maybe in the future like they’ve done with Boushh Leia’s height
@@LandspeederLukeI agree with Samuel. Actually collectors should give a hard pass on such messed up figures (eg in contrast to some colours being off a bit) as a direct feedback.
The fix is brilliant though and most certainly both of your vids should create enough buzz to make Hasbro’s designer team aware.
Hey @landspeederluke! I’d like to create a custom 6inch mutt Williams to my Indy display. Any ideas on where I could start?
Very helpful…thank you!
Wow! An actual legit reason for me to buy a Reva figure.
Looks great!