It’s our new one step cut & color bar: Q36 www.renegadeproductsusa.com/products/metal-polishing-compound-for-buffing-wheels?_pos=1&_sid=1f1bee470&_ss=r&variant=40209442242673
I'm a professional polisher yes he can do it like that. But it will show all the imperfections on the tank. You don't need to apply a lot of pressure but the machine do the work mostly. Just got to have a steady hand for it.
. Try softer wheel, lower rpm's. And whatever finishing bar, they have beyond the green. You can also finish off with a polish and soft wheel then some polish.
How much pressure do you need to add, or are you letting the buufer do the work?
You should let the buff and the compound do most of the work
Trying to find this on your site. Itd be nice to see something like this you can run on a 3 inch pneumatic polisher for engine bay polishing
It’s called Q36 and it’s found in the COMPOUNDS section
It's just compound you can run it on any size polisher lol
Which airway should we use for the one step bar ??
The pink or yellow
what rpm..
3500
Wow what bar was he using???
It’s our new one step cut & color bar: Q36
www.renegadeproductsusa.com/products/metal-polishing-compound-for-buffing-wheels?_pos=1&_sid=1f1bee470&_ss=r&variant=40209442242673
I'm a professional polisher yes he can do it like that. But it will show all the imperfections on the tank. You don't need to apply a lot of pressure but the machine do the work mostly. Just got to have a steady hand for it.
We were testing how much cut we can get without doing any prep work with our Q36 cut and color bar
Thats just cut
No. It’s cut & color
Still see scratches and pitting lol
@@kizzjd9578 of course. The compound was tested on a surface which we did not prep yet to see the full effect of cutting capability
@@RenegadeProductsUSA how do you get light scratches out after polishing to a mirror finish even if i have sanded to 2000 before polish?
@@kizzjd9578 you do not need the sand to 2000. 800 is more than enough. Polishing is a skill that takes time to perfect
@@RenegadeProductsUSA ok, do you think i havent sanded enough then before polish?
. Try softer wheel, lower rpm's. And whatever finishing bar, they have beyond the green. You can also finish off with a polish and soft wheel then some polish.