DIY Bender for thru wire for lures(step by step)English version
HTML-код
- Опубликовано: 7 сен 2024
- Due to a lot of demands(521k views 126 comments) from you guys for me to make a step by step video on how to make the DIY bender for thru wire for making our lures,,, Here it is in full English version... Thank you for your comments and supports for my channel...stay being a happy people..
thanks man, the best DIY wire bending tool video for lure makers i have seen 🤙
Great idea! Thank you so much for taking the time to re-do this in English. Great tutorial, will be making this tool today for lure making. Cheers!
1
Awesome video. All I can say is, Clever, very, very clever.
I'm from south africa.... Want to say WELL DONE
The description of how you made this was great. The information was very well laid out and explanations for things like the press fit were greatly appreciated. I do understand press fit but showing the diameters of drill bit versus pin diameters will help a lot.
I'll be making myself a few of these benders now after seeing your video. Also i have all the parts and lots of old drill bits at work to use as pins.
Thank you!
Thank you, all very well explained, I enjoyed the tig welding bit!
Damn dude, actually pretty damn impressive! Bravo sir!
Excellent tutorial. All has been revealed! You can also make articulated shanks for fly tying.
Thank you for this, I’m currently working on my own projects. This will be helpful in the future.
Awesome video! I don't even need one but was so impressed at the excellent way you show how to do it. One of the best DIY videos I have seen. I don't hear well but understood perfectly how to do it! Well done!
thank you so much for your time, This is good
Power master ... Professionally made.... The best wire twister.... Pa shout out din master...
Very nice! had hard time bending wires with just pliers, glad I found this, Was alot harder to make this tool with just a cordless drill but managed, maybe not as good as yours but definately works
Great job, thank you. This device interests me to realize shranks for intruder flies. I just have to buy a drill press to be able to drill straight, for the rest I will find nuts, bolts and steel rods in the nearby DIY store.
all the best.
Y.S.
i'm half flip 1/2 brit (IloIlo/ Sara) , Mechanical Engineer and fisherman too! That was VERY well spoken ! My full blooded American friends could not apply the technical jargon as well as you did! I need to visit the P.I again.. my favorite place!
Excellent description and video
Show your kindness by making dye that can be used to make a circle of wire
Great job on tool design and explanation.
Salamat kuya from San Diego USA
Nice work and tool of bait lures ....congratulations !!!!
Very good idea + English explain, thank for share 2 T up .
Good Job Man! I know what your welding issues are. Need to use gas and foot pedal. I know because I ran out of gas before and a foot pedal changed allot giving me control of the arc. Keep up your work and God Bless!
Also using a piece of metal / welding wire / rod would add metal to bond the two pieces together another thing the tip of the welder shouldn't touch the pieces it will ruin the cup and or tip that throws the arc instead practice keeping the tip really close with out touching the parts being welded , it should make nicer looking welds and parts won't get stuck on the tip of your welder also you won't have to replace the tip or ceramic cup as often , foot pedal does help but isn't necessary the best thing to do is practice the control of the arc while welding and on dry runs meaning no weld but act like you are to insure you are confident before starting to weld especially on bigger projects, mainly keeping the electrode from touching the work piece was your problem which with practice can be easily fixed
Superb idea and very well implemented. Saw your original video about bending the wire and wished you could have made it in English and was pleasantly surprised to see this English version of how to make this diy wire bending jig in detail. You got yourself a subscriber here bro. Will be getting a jig like this made for bending wires for my sputnik lead sinkers.
Thank you so much brother...enjoy fishing...
Thanks for showing me your bending technique....
I hope it will help in your DIY
Obrigado amigo, você me ajudou muito, mesmo eu não falando inglês, entendi bem como fazer esse dobrador!!!!! Aqui no Brasil chamamos de pitão essa argola da isca artificial!!!!!
I hope it will help you making a lot of lures...enjoy life ang fishing amigo
Excellent idea. Thank your!
Thanks for the bender idea. I made two of them, but I had to use my small drill press to make mine. I'm sure the mill makes them a lot easier. I used my benber to make European fastlink clips, Gemini clips, wire inserts for my Do-It molds and many other things. This is a great little tool. Thanks again.
I'm soo greateful that it helps you...thank you...
@@angelswayofadventure8368 I needed to bend some 1/8" Tig wire, so today I took your idea and made an oversized version from a 1"dia. x 2" lgth. bolt with corresponding nut. I am making some hook closures, to use with bungee cord on my Z-bait fish traps. The steel dowel pins I used are 1/4" and 3/16". The Allen bolt I used is a 1/4" diameter. I have to finish welding the handle on, but a test with a large closed end wrench went perfectly. Like I said before, this is a great tool and thanks again. 👍
Yeh mate this is great thanks for the English tutorial I subscribed for this reason.
Great job, making this tool and the lures look great.
Galing master yeeeeeW. Thanks for sharing it
Kool, I'm gonna try to make one, thank you, 🤙🏽
Awesome and brilliant
Thank you
Super brother iam from Tamil Nadu.
In India.🔥🔥💕👏👍
I'm pretty impressed. I willing to buy from you !
Thank you but I really don't sell it I just made this video for everybodys tutorial..sorry, I know you can make it your own.
Oh love it make me one, I don’t have the tools to make one
Hey that was an awesome job ! And thank you for taking the time to make this video. I would like to see more of your vids .
Me encanta todos los videos 👍👀👏👏💯👌👍♥️🇪🇦
Very good
Ikaw Ang magaling idol gagayahin ko ito 😄
Nko sayo ako natututo gumawa ng mga pain...keep safe idol..
@@angelswayofadventure8368 haha pang Tulingan at tuna mga pain ko idol ikaw nman magaling ka sa jig, tapos try ko dn gumawa ng molde turuan mu ako 😄
Great video. Thank you for sharing
Senpai eto na naman ako sa fishing spot mo. Good content Senpai 🐟🐠🎣 Fish on.
you should sell them through ebay or better directly through paypal let's see many people who don't have all those tools... thank you very much for sharing your invention
Thanks for taking the time and effort to make and post this video. Obviously, by the title, you must have made such a video in a other language, and your accent suggests you speak English as a second language: your English is very good! Your descriptions and filming are very clear and easy to follow, well done. While not the focus of the video, that red/sparkly lure looks amazing. I will be interested to watch on how you produce those. All around very well done!
Oh, and you stuck the tungsten on the part...there are two kinds of TIG welders: those who occasionally stick the tungsten and those who lie about it. ;) If you'll re-grind the point of the tungsten after sticking or dipping it in the metal, it will arc and run better. A drill to spin the tungsten and a bench grinder make fast work of re-grinding those. Thanks again for the video.
Thank you soo much ,your comment inspired me to continue on what I am doing.
GENIAL!! Muy buena técnica. Gracias por compartirla
Great job
Great job! I don’t have your tools to build…if happen to have one laying around. Will pay you! Thanks
You are so cool and great. I watched your video and tried making the same tool but I cannot due to the limited diy tool I have. Hope you consider sell the finished product commercially.
I'm soo sorry but I do not sell any of my tools that is why I share my Ideas for me encourage people to make their own...I know you can do it...
@@angelswayofadventure8368 I see your point. Anyway your video clip is really nice!!!
Great job! Thanks
Belle réalisation! J'aime!
Merci beaucoup mon ami.
Nice bro, you are Awesome!
Saludos y muchos éxitos...
great tutorial....thank
Very good India.
Parabéns pela criatividade, eu gostaria de comprar essa ferramenta, você fabrica para vender ou é somente para uso próprio??? Grato e no aguardo
Thanks for sharing
Master nandito n ako s bahay mo
You are funny 🤣yet creative
Dude, this is very genius. This bent mechanism is even better than the tools they sell under a brandname. Can you use this system also for making spinner lures? It needs a twist also
Yes, I also got a wire twister I just don't have a video of how I made it. I'm actually repairing an old spinner that I've found in the river
Love it
Thanks for translating & sharing 👍👍 watched your jig mold as well also great , trying to poor my own & make my own any tips on what to coat jig w/ before foil hot stamp & what to clear coat it w/after foil 👍👍thank you
I use lacquer automotive paint because it stick to metal very well and for my coat is just krylon gloss crystal clear
Thank you for responding 👍 Great job
çok güzel eline sağlık
Top Man!
Amazing work ...i hv one query what lead alloy use for metal jig ? Lead,tin, antimony percentage?
Супер !!! Спасибо !!!
Thank you too.if you want a Russian subtitle just click on the setting on the video click on subtitle/cc then click Russian Language...keep safe my friend and have a Happy Holiday.
Idol master
12:53....062 in not 1/32, regardless thank you good video
nice sharing master... new friend here... kaw na po bahala sa palaisdaan ko... fish on!
Yo quiero uno amigo soy de Colombia
Como estas mi amigo ... espero que te vaya bien...
Nice...!!
What is the purpose of the second small pin...? The one further away as it does not seem to be used.... only the small pin closer to you is used as the stop to create the eye.
Well it use as back to back,I just made a set of 2 bender in one bolt but you can just made 1 huge pin and 1 small stopper pin.
no todas las personas sabemos ingles, interesante video...pero no tiene traduccion al español.
Good job, good luck, what is the weight and the price of the mould
Can you please give the dimensions of all the parts? Thanks in advance.
what measurements for bending 1mm wire????
Hello dear friend, could you send me one of these, I would be happy.
tell me how much you want
it would help me a lot.
I would even love some different sizes and measurements.
I made it just like yours.
So happy thank you very much. But
What size is your wire?
I use 1/32 or .0325 diameter wire
É o quê estou interessado para fazer alguns ganchinhos de varais individual.tem como traduzir em português?
Friend how much mm for steel vayer jig
Thank you, can you please tell me whats the welder brand.
May you please make one for me, and send to me with the lure template, I will pay
Mantap 👍🏻
Cara pesannya gmn??
Hi !! do you sell, if yes where I can buy and price. Thanks
Show
Can I order it from you...I like to buy it
👌
Very good video!! A question. What material is the hex bolt? Aluminum?
It's a stainless steel
Hi,
What is the difference between using a bender with two pins vs one with four pins? Could a bender with three pins also work? Many a thanks, good stuff!
The only difference in putting a pins is when you put a different sizes of pins in one bender because differnt sizes of pins can give you many choices of hook eye sizes...the small pin is for cornering only but the big ones are for your eye size
@@angelswayofadventure8368 Thank you. Also please, can the CORNERING pins be of any size? For example, if I have a 4 mm and a 5 mm pin, can I make loops in those sizes while using the other pin as a cornering pin? Or, do cornering pins need to be smaller, like 2 or 3 mm? Thanks again.
Do you sell this tool? I don't have the tools to make one myself, but need to have one!
If possible, please sell one set to me, thanks.
ganda bro.magkano bro?
와셔 중심 잡아되죠?
Yes it is on the center.
…у меня к вам предложение : сюжет фильма познавательный , но есть одно но , не включаются субтитры на русском языке , поверьте это огромное количество потенциальных подписчиков и ещё больше просмотров …
Если возможно , не оставьте предложение без внимания.
There is translation in Russian just click on setting option on the video and click on subtitle/ cc then click Russian language.. Thank you soo much and have a Happy Holyday...keep safe my friend.
puede makabili nang ganyan...
can i buy one from you??
Can you make me one?
Hello po sir tama po ba? yung dowell pin isang 5mm and isang 2.5mm diameter? ok lang po? ayan lang kasi available sa shopee
Ok n yun tignan mo nlang ang result pwede mo nman e grind para lumiit...
@@angelswayofadventure8368 Yung inyo po ba sir ilan millimeters? Wala po kasi ako alam sa mga ganyan hehe
Tama lng yn kc saakin 0.18" or 4.56mm at 0.09" or 2.35mm
@@angelswayofadventure8368 Thank you sir!
🤔👌👍👏👏👏👏👏
Remek videó.😉Egy kérdés. Az Anyában lévö tüskék hány mm? A Csavar hanyas? 16 os?
Hey what would you charge to make me one
Sorry brother but I don't sell I just made the video for tutorials...
The diy bender that you are showing is different than the one that you give the instructions for. You only show how to press two dowels in the original bolt not the one that you have mounted on the bench. So there are total of 4 dowels on the bolt not 2. At 3:16 both compare
Look at your drawing is different than the one that you mounted on the bench
Yeah but the method is the same I only fitted 4 dowels but the concept is just the same...because you can fit 2 kinds of bender in one bolt i just show 1 set...
Your idea is great and very practical in application of fishing or other uses. Thank you for your gift , you are truly blessed!
Vendes
🇧🇷🇧🇷👏👏👏👍🏻