@@DaveSmith-cp5kj yeah.. but see what happens if you start with top notch and suddenly have to work with these machines : you are f#ckt! But starting with less fancy machine park and learn your trade... then after a while invest in the good stuff... You end up with precise Machinery matched with precise skills..😎
This is hands-down the nicest wire bender for this general-purpose wire bending I've seen and I've been searching YT for days and days in my free time. Nicely done. This design is what I'll build. Thank you.
Outstanding. Sometimes I just mute the background but I didn’t even notice the music because I was enthralled in all that excellence. Precision. Beauty. Thank you.
Watch the video and turn off the music and then replace it with your own music,problem solved, everybody likes their own music, I bet you don't like your young sons music.
что бы согнуть проволоку, которую можно согнуть круглогубцами, мне потребуется целый станочный парк, и самый главный вопрос нахуя мне надо вот так гнуть проволоку? тем более радиус сгибания никак не изменить
I am a beginning machinist. I am a avid fisherman. I would be glad to pay you for a drawing or pay you to make me one of these benders. Please respond. Fishing opener here in Mn is May 8th. Thank you very much.
Nice Job, I'm gonna stuff this idea in my idea file towards the back left side of my brain, right next to the file called "How to mechanize chain maille production."
Please don't hammer on the open jaw of a vice. It will ruin its alignment and potentially crack castings. If you must use your vice this way at least close the jaws firmly. Just saying...
Nice. But that incessant, obnoxious, repetitious head-pounding "music" bed! Why is it deemed mandatory for every friggin' video out there to have a music bed? Adds nothing, detracts much.
Je te donnes pas 2 semaines d'espérance de vie sur une fraiseuse si tu clames pas ton étau sur la table xD WTF sérieux ! Ca donne envie de montrer ta video en cours de prévention
Why? Because it's not delicate harp backed by the tickling of ivory piano keys? If you don't like the music, or if it's distracting you from the video then may I suggest just turning the volume down as opposed to complaining? Just a thought.
1:35 as someone who does machining for a hobby, the level of chatter in your drill press setup gave me an aneurysm. 10/10 subscribed!
6:54 agghhhh the visible runout in that drill chuck! My eyes, my eyes!!! (jokes aside this is a sweet project)
Just goes to show you all the people complaining about not having quality machines doesn't mean one can't make a good product if we really tried.
@@DaveSmith-cp5kj yeah.. but see what happens if you start with top notch and suddenly have to work with these machines : you are f#ckt!
But starting with less fancy machine park and learn your trade...
then after a while invest in the good stuff...
You end up with precise Machinery matched with precise skills..😎
This is hands-down the nicest wire bender for this general-purpose wire bending I've seen and I've been searching YT for days and days in my free time. Nicely done. This design is what I'll build. Thank you.
Outstanding. Sometimes I just mute the background but I didn’t even notice the music because I was enthralled in all that excellence. Precision. Beauty.
Thank you.
At 6:30 - that angle grinder less than a cm from your thumb. Oooh!
Yeah that was hands down the most retarded thing I’ve ever seen someone do. Definitely not keeping his fingers for long
Spectacular project! You are a talente man 🙏
Metal bender mini..bagus hasilnya 👍👍👍🤝🇮🇩 indonesia
Neat little tool, thanks for the method.
Super helpful, thanks!
C'est beau à regarder, il y a de la magie dans ce travail 👍
Nice bender, thanks for showing your build.
Excellent workpiece and that’s I need it 🙏 👍
Very clever and well done. Thanks.
С наступающим Новым Годом!!! Успехов, счастья и здоровья!
Clamp down the machine vice it’s safer and you’ll get a better finish.
Great project well executed. Grate music should be executed.
Are you able to share the schematics for this? I have been looking all over for something like this and this is the only tool that fits my needs.
Do you have another method for making a wire bender without using a Drill , Lathe , or Angle Grinder ?????
Отличная работа!
Excellent tool
Very useful superb 🙏🙏🙏🙏🙏🙏
Buen trabajo... Gracias por compartir tu idea y desarrollo.
Me interesa saber si haces este tipo de dadoso trabajo y lo vendes.
Saludos desde México
should be called DIY Mini Bender from a steel screw, a bunch of steel and a machine shop
I like that.
Built the way you want it and will probably outlast a commercially available one.
Loving it!
How or where can I buy a wire bender😅
Nice video but the music doesn’t help at all.
Watch the video and turn off the music and then replace it with your own music,problem solved, everybody likes their own music, I bet you don't like your young sons music.
Awesome ! , Is That A Brass Tube ?
Nice little bender. We shared this video on our homemade tools forum this week :)
что бы согнуть проволоку, которую можно согнуть круглогубцами, мне потребуется целый станочный парк, и самый главный вопрос нахуя мне надо вот так гнуть проволоку? тем более радиус сгибания никак не изменить
I have requires this tool for 1.6 mm wire bending
Very nice
Great idea bro...Music is awsome.,👍
That drillpress vice gives me anxiety lol
Try bolting your vice to the drill press on your next video…..
Do you make these to sell
👍👍👍🇧🇷🇧🇷🇧🇷
Can you please make me one? Thanks
From a steel screw..... And other bits.
I am a beginning machinist. I am a avid fisherman. I would be glad to pay you for a drawing or pay you to make me one of these benders. Please respond. Fishing opener here in Mn is May 8th. Thank you very much.
verry good
I guess everyone owns a lathe to do this DIY project!
E precisa de tudo isso só pra fazer isso???
Interested in buying
well, you need a lot of tools to make that tool...
I’m shore I have plenty of steel that size but no screws
music too loud
Ak.ta.machin.paba.jabe.ko.to.dam
All you need is a….. fully stocked machine shop
Excellent but the music is super annoying and totally unnecessary.
Nice Job, I'm gonna stuff this idea in my idea file towards the back left side of my brain, right next to the file called "How to mechanize chain maille production."
brao serbijaneeeeeeeee
Please don't hammer on the open jaw of a vice. It will ruin its alignment and potentially crack castings. If you must use your vice this way at least close the jaws firmly.
Just saying...
Nice tool but a totally clickbait title - hardly made from a steel screw is it!
Well it's from chunks of metal and large bolts mainly lol
@@bigbasil1908 and a large, fully equipped machine shop.
Music is fine with me. Better than just machining sounds, which is soothing to me
👍
I have CNC machine from this job
Nice. But that incessant, obnoxious, repetitious head-pounding "music" bed! Why is it deemed mandatory for every friggin' video out there to have a music bed? Adds nothing, detracts much.
That's a bolt !
6:26 - Oh my God!! Please be careful with your fingers! Could easily have used a set of pliers :-)
the guy hasn't even clamped his vice, drills and mills at all costs lol. I think he skipped mechanics class
Was the chicken you cut worth the frog you scared?
Nice vid but terrible music…
gjbbbbbbbb tollllllll
Je te donnes pas 2 semaines d'espérance de vie sur une fraiseuse si tu clames pas ton étau sur la table xD WTF sérieux ! Ca donne envie de montrer ta video en cours de prévention
dude. your video is cool, i really enjoy the content, but your music is horrendous. it's super repetitive and maddening
+
I can help you, just buy a round pliers and you will have more time in a place to invent unnecessary things.
lose the music, it ruins the video.
That’s what the volume icon is for.
Sad old man 🤣
Why? Because it's not delicate harp backed by the tickling of ivory piano keys? If you don't like the music, or if it's distracting you from the video then may I suggest just turning the volume down as opposed to complaining? Just a thought.
... херотень какая-то безпонтовая 😜👎!!!
А если ещё и стоимость этой хрени посчитать! Полдня работы...
seriously, why the music? horrible.
Excellent tool