Pretty cool ring roller. The toll could be scaled up for larger work too. The only suggestion I would make is to put the rollers in double shear to eliminate any deflection. I really like simple tools like that that can be made from project scrap. This is a good tool to teach fabrication skills to a newbie.
Thanks for sharing, but I have a welding machine, drilling as much many people, and an angle grinder. You do have much much more tools. Simple things with the simple tools are much more easy for us.
Он был бы простым, если бы для его изготовления не потребовался токарный станок, это раз. Он нужен если гнуть такие заготовки в больших количествах, это два. А десяток таких колец из полосы, тем более такой толщины на раз два в тисах на трубе с упором.
Hope this one is better than the one I just sent back. The shaft was so loose in the bushing that the drive gear would not stay in place against the cutter wheel. (ugly grinding noises and gear locking up!) Not sure how you tell the quality before you buy online. This did not post where I intended. It should have gone with the sheet metal shear drill attachment. It's still good FYI.
100%. Plus don't drill on short pieces of metal while holding it by hand and putting your fingers down in a pipe and creating a pinch point to act as a powered shear. Was totally cringing.
not a good idea to wear gloves around a drill press , a buddy of mine did , that the metal shaving caught his glove and tore his finger right of the bone
Aside from the fact that I don't own or have access to a lathe, the cost of bearings and stock metal would be more than I could justify for a tool that I might use once a year. MIGHT. But if you're into making wooden buckets and need bands to bind them, this'll put you right in business.👍
Muy confiado para perforar en el taladro de árbol, yo me ayudo con la herramienta hombresolo, para evitar un posible accidente. Las manos son lo más que hay que cuidar.
A break is primarily for sheet metal. Rolls (or roller) are also for sheet metal use unless they are grooved, then they will do rod as well. This tool is neither and is adequately named. Duh!
An Bohrmaschinen arbeitet man niemals mit Handschuhen schnell sind da ein Finger weg. Tu das nie wieder! ansonsten sehr gutes Video und ein gutes Werkzeug
Don't waste watching video every step time killing such as cutting grinding drilling tapping welding all operations slowly make fast edit man Otherwise irritation and skip your videos
Pretty cool ring roller. The toll could be scaled up for larger work too. The only suggestion I would make is to put the rollers in double shear to eliminate any deflection. I really like simple tools like that that can be made from project scrap. This is a good tool to teach fabrication skills to a newbie.
🙏🙏
Посмотрел до конца
И понял что такой девайс мне не нужен .
Но мастеру лайк , было приятно смотреть.
🙏🙏
Ну хоть подшипники варить перестал, это радует.
Thanks for sharing, but I have a welding machine, drilling as much many people, and an angle grinder. You do have much much more tools. Simple things with the simple tools are much more easy for us.
🙏🙏🙏
The simplest metal bender is a log and a big hammer. But I may be showing my blacksmith bias.
Thanks great work but gloves not allowed on drilling machine
🙏🙏
Gran trabajo amigo saludos desde Uruguay 🇺🇾🇺🇾🇺🇾
🙏🙏🇮🇩
Very few people have a lathe sitting in their back pocket cool video!!!😂
🙏🙏
Он был бы простым, если бы для его изготовления не потребовался токарный станок, это раз. Он нужен если гнуть такие заготовки в больших количествах, это два. А десяток таких колец из полосы, тем более такой толщины на раз два в тисах на трубе с упором.
👍👍🙏
Интересный вы народ. Не надо вам, посмотрели? И молча ушли.
સરસ
🙏
Hope this one is better than the one I just sent back. The shaft was so loose in the bushing that the drive gear would not stay in place against the cutter wheel. (ugly grinding noises and gear locking up!) Not sure how you tell the quality before you buy online. This did not post where I intended. It should have gone with the sheet metal shear drill attachment. It's still good FYI.
🙏🙏
Not all of us are great engineer's. We just love getting down and dirty with metal, do a bit of welding and bit of bending. It's my recreation
🙏
Well tell me is not a simple pleasure when it may not be your day job
Что же Вы метчик не жалеете?
Смазку любую применяйте, хотя бы, воду!
🙏🙏
Хороший инструмент для гаража супер 💪👍👍
🙏🙏
Good advice.. Don't use gloves while drilling in metal..Metal debri can pull of a finger !!😮
🙏
Am watching all videos
🙏
Looking to loose some fingers holding items like that when drilling
🙏
Never wear gloves when working with rotating machinery.
🙏
100%. Plus don't drill on short pieces of metal while holding it by hand and putting your fingers down in a pipe and creating a pinch point to act as a powered shear. Was totally cringing.
not a good idea to wear gloves around a drill press , a buddy of mine did , that the metal shaving caught his glove and tore his finger right of the bone
👍🙏
Agree don't wear gloves
Охренеть! Затратить столько ресурса и материала,чтобы в результате получить никому ненужную хрень!
🙏
Восток - дело тонкое......😉
И сверло спалить ( 3:30)
Вы за себя говорите. Не надо от моего имени. Я вам доверенность не отписывал.
Ok,if you have alot of rolling, otherwise by a small hand roller save time and energy
🙏
No oil for bits, gloves on near machinery. Are you all trying to piss people off with dull bits or just hurt them?
🙏
No doubt if you have a metal turning lathe, that you would also have a metal saw! So much quicker and safer on your project.
🙏
Bravo 👍👍👍👍👍
🙏🙏
Kolay gelsin ustam elinize emeğinize yüreğinize sağlık değerli bilgiler için çok teşekkür ederiz iyiki varsınız 🇹🇷🤷👍👏
🙏🙏🇮🇩💐
Aside from the fact that I don't own or have access to a lathe, the cost of bearings and stock metal would be more than I could justify for a tool that I might use once a year. MIGHT. But if you're into making wooden buckets and need bands to bind them, this'll put you right in business.👍
🙏🙏
And again he's making a high-end beautiful tool just use bushings for some grease on and be done make that same tool in 10 minutes
And it won't cost an arm and a leg and make it out of scrap plumbing from the backyard
Thanks sir
احسنت أداة جميلة جداً
🙏🙏🎉
What's up with these 5 thou cuts on the lathe? And 12 and a half minutes of that song is about 12 minutes too much.
🙏
Very Nice tool
🙏🙏
show ideia muito top
🙏🙏
Beautiful
🙏💐
Iva bn hasta q saco una maquina industrial q la verdad nadie tiene en la casa asi q deje de ver el video😒
🙏
I love it. I do wish I had a lathe. What is the heaviest metal this would shape ??
🙏
Mantap bos ku
🙏🙏
Muy buena Sencilla y efectiva Muy bien Asia welder
🙏🙏🎉
Muy confiado para perforar en el taladro de árbol, yo me ayudo con la herramienta hombresolo, para evitar un posible accidente. Las manos son lo más que hay que cuidar.
🙏
Excelente idea, muchas gracias
🙏🙏💐
Merci beaucoup
👍🙏
Very Cool. Nice work
🙏🙏💐
Lanjut kawan...
Siap 🙏
Маладэс ! 👍
Мне такой же сделай.😉😁
🙏
Look at this simple tool that I made using a $10.000 machine
🙏🙏
Why wouldn’t you put a couple drops of cutting oil BEFORE you thread those holes ?? Just saying
🙏
Genial! aunque ,no para cualquiera...
🙏
У меня нет товарного станка, поэтому не смогу.А так очень хороший станок!
🙏
Sos un genio!!!!!
🙏🙏
Устройство из серии "машинки для стрижки тараканов"...
🙏
Сверло заточки требует.
👍🙏🙏
you doing will
we love you.
🙏🙏♥️
Good job
🙏🙏🎉
Bonne. Réalisation bravo
🙏
Ottimo👍
🙏🙏
Talvez sejam poucas pessoas saibam fazer porque não é tão simples quando entre em cena um torno mecânico.
🙏
생각보다 만들기 너무 어려운데요.. 저 장비들 구해서 놓을곳도 없음.. ㅋㅋㅋ
🙏
Muy bueno 👌😸
🙏
Зря время потерял напросмотр
🙏
Нам об этом зачем знать?
Станок токарный осталось купить...
🙏
Ага...😂😂😂
è un ottimo congegno ma chi non ha possibilità di un tornio?
👍🙏
You tell me that, what can i do when i have not a lathe machin ? 🤨
Bom demais Parabens
🙏🙏
Realy good.
🙏🙏
That is not a metal bending tool! METAL BENDERS ARE CALLED a BREAK.
IT'S called s set of ROLLERS. Duh!
🙏
A break is primarily for sheet metal. Rolls (or roller) are also for sheet metal use unless they are grooved, then they will do rod as well. This tool is neither and is adequately named. Duh!
This is very good video 😀😃😄
🙏
Простой инструмент это когда смастерил без проблем. А не токарить, сотню подшипников ставить и т.д...
🙏👍
Not many people have an engineering workshop either,buy a metal bender instead,less hassle.
🙏
An Bohrmaschinen arbeitet man niemals mit Handschuhen schnell sind da ein Finger weg. Tu das nie wieder! ansonsten sehr gutes Video und ein gutes Werkzeug
👍🙏🙏
Muy bueno! Gracias!
🙏🙏
Mit der Ständerbohrmaschine bohren und Werkstück nicht einspannen, echt ? :(
🙏
Для такой фигни,сварка,дрель,такарный,а результат ,обыкновенный трубогиб; рычаг,два- три болта и одна опора.Не нужно городить огород.
🙏
В мире существуют отрезные резцы для токарного станка....
Резцы существуют в магазинах а вот под рукой не оказалось еще они имеют свойство ломаться скалывается напайка вот
🙏
Классс
🙏🙏♥️💐
Cool
🙏
Нихрена себе простой😂😂😂. Да делают из подручных средств намного проще....
🙏🙏
nice slide guitar music
🙏🙏
😊5@@asiawelder
Too long video
🙏
можно сделать в 100 раз проще !
🙏
Уважаемые изготовители и заказчики, как же вы не можете понять? Урны должны быть круглыми!😮😮😮😮😮😮
🙏
Хорошее приспособление, но можно это ускорить. Зачем показывать от и до. Пожалейте время.
🙏🙏
Супер👍
🙏🙏
Дешевле будет готовый купить😅
🙏
Muantaaaap ...❤
🙏🙏♥️
прикольно
🙏
Akinek van ennyi gépe, az tudja is. Akinek meg nincs az vesz egyet, mert külömben többe kerülne a leves, mint a hús!😂
👍🙏
Wow, wirklich schön anzusehen deine Handwerkskunst. Gibt es dafür einen zeichnungsplan den Sie bereitstellen würden? Vielen Dank fürs hochladen
🙏
Respekt pdr gjithcka
What is the name of the music in the background?
🙏
Well done...... Top!
doesn't make sense if I have to buy a lathe first.
Thus a pattern without value.
🙏
Who said you have to buy a lathe?
Just buy a big bolt and matching bearing. Lathe not needed.
@@chip-load Thank you .....
У корте процессы резки шлифовка сверления и пр. Что возможно
👍🙏
Na realidade isso é um laminador
🙏
Сплошное нарушение техники безопасности😢
🙏🙏
а ниче что подшипник приварен!!!???
🙏
Mejor lo compro echo me sale más barato que ponerme en todo ése trabajo toca tener un taller completo
🙏
ما اسم الموسيقا
🙏
Don't waste watching video every step time killing such as cutting grinding drilling tapping welding all operations slowly make fast edit man
Otherwise irritation and skip your videos
👍
un pò di olio quando usi il maschio per filettare ed danche per forare non guasta
👍👍🙏
Pero no muestran La parte del eje para girarlo con el taladro les falló
🙏
Очень нудно 😂
🙏
Porque no les hace falta....tienes un torno, aparato de soldar y haces estas tonterías ?
🙏
No. Me convence más es la música q ponen y no explica ni michi
🙏
Interesante trabajo, pero muestra procesos que no son necesarios para la comprensión del proyecto y hace perder el tiempo. Más síntesis
🙏
Oil !!
🙏
Простой..куча подшипников, токарный станок...делов-то.
🙏
😂😂😂проще некуда
👍👍👍👍👍
👍👍👍🙏🙏