Very cool ideas but please if you try this use a vice or brace it on a table at least to protect your fingers when using a saw like this . I’d hate for someone to follow these instructions and have that saw skip over into their fingers .
Its cool to invent, create your own homemade things, but the Time, Effort, and Tools needed...., I personally Would just get an Inexpensive Wire bending loop Tool. But agree.... There is personal Satisfaction Making it yourself.
It's a good idea, but... the 'know how' is very dangerous! É uma ótima ideia, porém a forma como fez o corte não é nada recomendável, é muito inseguro.
Go buy a valve core tool from your local parts store and start with half the tool already made 😊
That would be way too weak to use.
Very nice and clean! 👌
Could you build something like this for 12ga wire but also put a nitroset clip in the loop and use a hand drill driver?
Very cool ideas but please if you try this use a vice or brace it on a table at least to protect your fingers when using a saw like this . I’d hate for someone to follow these instructions and have that saw skip over into their fingers .
Faut pas avoir peur des mouches😊
safety first!!!! be carefull, you could do all that with stationary equipment and with safety!
Its cool to invent, create your own homemade things, but the Time, Effort, and Tools needed...., I personally Would just get an Inexpensive Wire bending loop Tool. But agree.... There is personal Satisfaction Making it yourself.
Simple et efficace 👏👍
Merci 🎉
You are a genius
Gostei é simples e facil de fazer ✌️✌️✌️
What is the sleeve made out of?
Not sure but I used a .410 shotgun shell.
Which wire size are you using? my loops came out awful and it might be because I'm using a softer wire (20lbs)
Corde à piano obligatoire 😊
Heck I’d buy that! 😂😂
How to For wire 0.4mm
Nice videos 🎉
Good idea👍
Spent hrs. looking for my twistech spinner maker and couldn’t find it. That is freakin great. I’ll make one tomorrow 👍
Thank you !!!
You could sell those. 🤘🏻
볼트 🔩 만들수이서요?
Взял отвёртку изнахратил 😂
Gostei deste método bem mais simples e
Nếu bạn tự nghĩ ra để làm phục vụ cuộc sống thì quả là thông minh. Nếu bạn học hỏi để làm phục vụ cuộc sống thì quả là khéo tay.
А в чём проблема эту накрутку сделать с помощью тех же круглогубцев и пальцев рук ну или в крайнем случае плоскогубцев и круглогубцев
It's a good idea, but... the 'know how' is very dangerous!
É uma ótima ideia, porém a forma como fez o corte não é nada recomendável, é muito inseguro.
Ačiū už patarymus,,, za trudi ne gliadia laik
❤❤❤ GRAZIE ❤️❤️❤️
O'Hara Stream
Как ещё пальцы целы?
👍👍❤❤
😮
Are you actually that poor???
are you actually so insecure that you have to judge others for being resourceful?
I think he’s just smart and handy!