Thank you, I’m going to be trying to upload a bit more often 🤞 I did hear from someone else that they got it out through the wheel arch, I didn’t even look or think about that at the time
Hey Twiggs, job well done as always! You helped me with the vacuum pump video, and now it's time for the steering rack. I still have to figure out the red vs green vs black cap and PAS fluid type, since there's quite a heated debate about it. Will probably use Febi 06161 / CHF11S on a long nose 2003 AJT. Cheers!
Well done pal. The biggest pig can be the metal lines going into the rack. If they are furred up they have a habit of twisting the pipe as you undo them. I turn back in 1/2 a turn for every turn out until they are loosened up.
Nice vid. One thing I would suggest is sacking of the rubber mounts and using polyurethane ones for longevity. My rack needs to new mounts and you guessed it, I won’t be using the rubber ones. Also what colour/code is that grey? Looks awesome.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Thanks for this. Made a miserable afternoon under the van a lot easier, much appreciated ❤
Great video again Twiggs, great to have you back. When I did mine I’m sure I removed the rack through the passenger wheel arch…
Thank you, I’m going to be trying to upload a bit more often 🤞
I did hear from someone else that they got it out through the wheel arch, I didn’t even look or think about that at the time
Good to see you posting content on your channel again. Great how to. 🤙
More to come!
Thanks mate 🤙 👍
Hey Twiggs, job well done as always! You helped me with the vacuum pump video, and now it's time for the steering rack. I still have to figure out the red vs green vs black cap and PAS fluid type, since there's quite a heated debate about it. Will probably use Febi 06161 / CHF11S on a long nose 2003 AJT. Cheers!
You helped me big time I Was worryed to take of the subframe and that I need some aritation Tool but that is nice and straight to Do thank you
Well done pal. The biggest pig can be the metal lines going into the rack. If they are furred up they have a habit of twisting the pipe as you undo them. I turn back in 1/2 a turn for every turn out until they are loosened up.
Yes I had to do that on the rear brake bias valve, I’ve broken pipes in the past because they wouldn’t come out
Where did you get your replacement rack from ?
I would like to know this too, most suggest a refurb part ex rack and they seem to cost between £350-£400
Hello a great video perfect job 👍👍👍greetings from Germany 🇩🇪👋👋👋Kai🙏🍻
Thank you very much 🍻 💪 👍
hey, what rims are these? from what car? What size ?. Looks realy good ! Regards !
Audi wheels, wrenstravels on instagram, she knows
@@TwiggsT4 I'll check it , thanks ! ;D
This similar on T5 u think ?
Nice vid. One thing I would suggest is sacking of the rubber mounts and using polyurethane ones for longevity. My rack needs to new mounts and you guessed it, I won’t be using the rubber ones.
Also what colour/code is that grey? Looks awesome.
Atta boy! Just a question: How much time does it takes to remove it, about?
It didn’t take that long, I took my time, probably a couple of hours to get it out
That was a fun day
At least it wasn’t raining that day 😂
Hi Twiggs, how much fluid did you use?
Just under a litre I believe
Thank you 👍
Hope it’s the same as a long nose 03
perfect .hello to france
Thank youuu!!!
You're welcome!! 🤙
You good bro
All good thanks 👍
Brilliant Twigg. Just a shme theyre so fekkin expensive.