Bro Maine bahoot video dekhi hai is topic se related but koi kaam nhi kiya Aapka video bahoot detail me hai aur mere router pr successfully work kiya Thank you Mai itna khush hu ki aapko 100 150 UPI krne ka man kr rha h Kyunki mai ek shop me gya tha to wo bola ki unlock kr dunga pr 500 lunga So thank you bro for saving my 500❤❤❤❤❤
Truly humbled by such an encouraging comment, brdr! Humein aaj realize hua ki humari videos itna bda impact create kr rhi hain asal zindagi me, bohut shukriya iss support ke liye🙏🙏 Aur abhi humein UPI ki nahi, subscribers ki zaroorat hai, please apne doston se zyada se zyada subscribe krwa do.
Hi brother. I recently moved to a new house where, unfortunately, Airtel has not yet set up their fiber internet network. So, I have opted Jio Fiber. My problem is that the Jio Fiber router has very low signal strength and doesn’t reach the 1st floor. I still have my Airtel Fiber WiFi router from my previous connection and house. My question- If I follow this tutorial and unlock my the Airtel Fiber WiFi router, will I be able to use it as a range extension for my Jio Fiber WiFi router by connecting both through LAN?
Hello brother, you don't need to unlock your Airtel ONT to use it as a range extender. You merely need to disable its DHCP server and bring its IP in the correct subnet. Just follow our tutorial and you should be golden: ruclips.net/video/zOBqZPepQs4/видео.htmlsi=1hNmCn7kfQaTrewl Please let me know in case of any help!
@@geekytwins - i am using it as extension even without disabling DHCP on airtel, just plug LAN cable into any port on airtel ont. BUTT you have to completely remove fiber optic cable coming from airtel server & edit ip. he he
Hi, currently i am using this router as bridge mode as default as provided by airtel. I am using this router with Asus router. Since last 2 to 3 years, I was using some old Nokia router in which I could do the manual settings, but recently my net suddenly stopped working and they changed the ONT router with this model and they configured it into the bridge mode . But since then my servers behind my own router showing that port 80 is closed, I read somewhere in the forums that that you have to request the Airtel to open port. Will unlocking give added benefit to open a port in the router? I know after unlocking, I can switch settings of this router into bridge mode, static mode or dynamic IP mode. What Airtel guys told me that now routers can be only be switched to bridge mode by backend Airtel Team only,. Even if you do the bridge mode manually on the router, it will not work. Airtel technical staff also told me that that to open the port of the router, you have to file a request to Airtel customer care. Can you help me on this?
No sir i have already bought STATIC IP from airtel for last 3-4 years. Earlier it was working great. Recently they changed my old ONT with this nokia ONT. Airtel configured it to dynamic ip and then on request for bridge mode , back end team reconfigured it to some knock mode or bridge mode. Now i am using bridge mode but settings in ONT are greyed as dynamic ip. Settings on my own asus router are configured as static ip ,given by airtel , but settings on ONT router are greyed out as dynamic ip. Since then my port 80 is closed. Thats why asking you. What if after unlocking i configure it as static ip and then put if into bridge mode
Thank you Sir for reply. Now my ONT is unlocked and I’m using in Bridge mode with all the default settings of Airtel deleted with lan 4 port as Bridge mode, and internet is the working fine. but port 80 is still closed. Maybe Airtel is blocking it.
@@geekytwins , My server needs port 80 to renew “ssl” certificate from “Let’s Encrypt “. This issue came up when they reconfigured my ONT settings. Port 80 is already forwarded on my asus and server. One more thing i need to ask. Can i make it back to original airtel state, in same method , as airtel engineers might visit me to check router settings? I have back up of original config file
Bhai, Thank you for the video. Worked like a charm. Is there a way mac of lan could be changed? I could see slightly different mac in XML so wasn't sure.
@@geekytwins some ISP have mac binding to DHCP, they assign IP only if Mac address matches. So no internet unless until I change mac to the registered one.
Navjot ji, airtel uses VLAN mapping which is why many face PADI errors, since 100 doesn't work at all. Can you make a video about using UART of G7 to discover the VLAN ID of one's connection?
Hello brdr, I'll very soon try to get a spare G7 and then use UART to check if I'm able to do VLAN scan. Till then, I suggest you get G3v1, it has inbuilt VLAN scan feature.
My router roote complete mane local internet connection laga hu but wan ip not working & internet LED bulb not blink can you help me why internet & wan ip not showing
@@geekytwins All settings related to network settings are grayed out even after a hard reset. I want to use this router as a Access Point , as this is a spare router.
@@Aakash1238 brdr, you only need to change LAN settings for using this as an Access Point. I've already created a video on this topic: ruclips.net/video/zOBqZPepQs4/видео.htmlsi=t3ElIZEtadM4YOfb
Hi Great Video! I´ve been following the steps, however, I´m stuck at the moment where I have to download the .cfg file from the modem, my modem (Nokia G-2425G-A) has the option to export blocked and I don't know where can I get that. Could you help me, please?
Hi Navjot after hard reset unable to connect to router wirelessly ssid showing as ALHN-C3E2 but dont know password to connect FYI i dont have LAN port in my laaptop so unable to connect on LAN Port . can you please let me know wifi keys to connect to wifi?
Hi bro Tataplay fibre NOKIA same ONT moderm.. I dont have the Back and restore tab .. I cant export and import the Config file.. Any ways for THAT TO UNLOCK..?
I do know that we can change the GPON serial number, will have to check if changing WAN MAC is possible. If that's possible, I see no reason why it won't work with Jio.
@@geekytwins do let me know if it works, i have a guy selling me this router, the only reason i am not buying is that i am unsure about wan mac address change possibility.
i have no internet in my router. and i can not connect with telnet command it says Connecting To 192.168.1.1...Could not open connection to the host, on port 23: Connect failed
It should be possible to do so, Kunal brdr, if we're able to clone the WAN MAC of the JioFiber HGW in this Nokia ONT. I'm not sure how to do it though. Will explore more and check.
@@geekytwins yes, i am using jio ont thirds party ont (tplink G3 only) without original jiofiber router like cloning GPON Serial No & WAN Mac Address & VLAN ID .. then it works with Automatic DHCP ip address from jio server... You can find out the broadband forum in my post name is Successfully authenticating TP-Link ONT skipping Reliance JioFiber Router...
@@kunalbhattacharjee4793 Yes brdr, I was using a similar setup, G3 plus AX53, and I'd have made a video, but I disconnected JioFiber due to terrible experience. And thanks for providing the name of the post, I'll look it up, if need be!
nokia 2425 ko unlock kar liya everything went perfect but after unlocking I am trying to run it on my own network..not airtel....no internet ..despite all efforts
I have a done a unlock with the help of your file, but after the unlock i have given factory reset, then after admin username & password not accepting. Please help me to get the login page username & password
Yep, we certainly can, we also have videos on this topic: 1. ruclips.net/video/-XsXmSAkPlk/видео.htmlsi=Pq2W7UdC6vPbxwWu 2. ruclips.net/video/g1hX6AlknTw/видео.htmlsi=9Rw8eJPbH0ysdMIP
Bhai iska default wifi password kiya hai ALHN-FE85 yh ssid likh kr aarahi hai plzz help brother isska default password kiya hai jissay mai wifi say connect ho sako or aagaye ka process kar sako plzz Reply fast brother plz 🙏🏼
Thanks sir unlocked successful i like to know can i use railwire broadband in this unlocked nokia router i have a railwire connection can u please help me
@@9506himanshu To use it as a wireless repeater,: 1. Change the LAN IP address of the ONT to something in your main router's subnet, e.g., if your main router's IP is 192.168.1.1, change the IP address of the ONT to 192.168.1.2. 2. Disable DHCP on the ONT 3. Connect the LAN port of the main router to the LAN port of the ONT and that's it.
Bro, are you referring to Avaya IP Phone? If so, we already have a setup video with IP Phone on our channel. ruclips.net/video/gJBgTN-3Hns/видео.html The basic steps should be the same!
Bro Maine bahoot video dekhi hai is topic se related but koi kaam nhi kiya
Aapka video bahoot detail me hai aur mere router pr successfully work kiya
Thank you
Mai itna khush hu ki aapko 100 150 UPI krne ka man kr rha h
Kyunki mai ek shop me gya tha to wo bola ki unlock kr dunga pr 500 lunga
So thank you bro for saving my 500❤❤❤❤❤
Truly humbled by such an encouraging comment, brdr!
Humein aaj realize hua ki humari videos itna bda impact create kr rhi hain asal zindagi me, bohut shukriya iss support ke liye🙏🙏
Aur abhi humein UPI ki nahi, subscribers ki zaroorat hai, please apne doston se zyada se zyada subscribe krwa do.
@@geekytwins thank you for your response bro
And mai apne Circle me sb se aapka channel subscribe krwa rha hu
@@AdiKumar-qs8fm Thanks a lot, bro!
@@AdiKumar-qs8fmHello Bhai mere me error aa rha can you help me ?
Cfg compress nhi ho rha hai
@@mr.shailendra5854 Error hai ya warning?
Hi guys I don't know about other videos in RUclips ,but guys it works
Of course, it does! Thanks for liking our genuine content, sir!
thankyou navjot ji, with your help i unlocked my nokia router❤
Most welcome, pal😊 Just keep sharing our channel and keep supporting!
Bro can you provide me config file
@@mr.shailendra5854 Why do you need it?
Such an helpful video and youtuber 🎉🎉🎉🎉🎉 doing great work brother ❤
Thanks a lot for the support, dear brdr!
Thank you for your efforts to make this knowledge videos.
Can we use it for other internet providers!
Is it safe to use unlocked router?
Yes, after changing GPON SN, we can use it for other ISPs as well and yes, it's totally safe!
Hi brother. I recently moved to a new house where, unfortunately, Airtel has not yet set up their fiber internet network. So, I have opted Jio Fiber. My problem is that the Jio Fiber router has very low signal strength and doesn’t reach the 1st floor. I still have my Airtel Fiber WiFi router from my previous connection and house. My question- If I follow this tutorial and unlock my the Airtel Fiber WiFi router, will I be able to use it as a range extension for my Jio Fiber WiFi router by connecting both through LAN?
Hello brother, you don't need to unlock your Airtel ONT to use it as a range extender. You merely need to disable its DHCP server and bring its IP in the correct subnet.
Just follow our tutorial and you should be golden: ruclips.net/video/zOBqZPepQs4/видео.htmlsi=1hNmCn7kfQaTrewl
Please let me know in case of any help!
@@geekytwins - i am using it as extension even without disabling DHCP on airtel, just plug LAN cable into any port on airtel ont. BUTT you have to completely remove fiber optic cable coming from airtel server & edit ip. he he
Hi, currently i am using this router as bridge mode as default as provided by airtel. I am using this router with Asus router. Since last 2 to 3 years, I was using some old Nokia router in which I could do the manual settings, but recently my net suddenly stopped working and they changed the ONT router with this model and they configured it into the bridge mode . But since then my servers behind my own router showing that port 80 is closed, I read somewhere in the forums that that you have to request the Airtel to open port. Will unlocking give added benefit to open a port in the router? I know after unlocking, I can switch settings of this router into bridge mode, static mode or dynamic IP mode. What Airtel guys told me that now routers can be only be switched to bridge mode by backend Airtel Team only,. Even if you do the bridge mode manually on the router, it will not work. Airtel technical staff also told me that that to open the port of the router, you have to file a request to Airtel customer care. Can you help me on this?
You were probably moved to CGNAT, bro.
Please check if your IP falls in the range 100.64.0.0 to 100.127.255.255
No sir i have already bought STATIC IP from airtel for last 3-4 years. Earlier it was working great. Recently they changed my old ONT with this nokia ONT. Airtel configured it to dynamic ip and then on request for bridge mode , back end team reconfigured it to some knock mode or bridge mode. Now i am using bridge mode but settings in ONT are greyed as dynamic ip. Settings on my own asus router are configured as static ip ,given by airtel , but settings on ONT router are greyed out as dynamic ip. Since then my port 80 is closed. Thats why asking you. What if after unlocking i configure it as static ip and then put if into bridge mode
Thank you Sir for reply. Now my ONT is unlocked and I’m using in Bridge mode with all the default settings of Airtel deleted with lan 4 port as Bridge mode, and internet is the working fine. but port 80 is still closed. Maybe Airtel is blocking it.
That's good as well as sad to hear, bro.
Also, what's your use case with port 80?
@@geekytwins , My server needs port 80 to renew “ssl” certificate from “Let’s Encrypt “. This issue came up when they reconfigured my ONT settings. Port 80 is already forwarded on my asus and server. One more thing i need to ask. Can i make it back to original airtel state, in same method , as airtel engineers might visit me to check router settings? I have back up of original config file
Config file create hone ke same file multiple router main use kar sakate hai ya same prossce baar baar karna hoga
I haven't tried this out since I only possess a single ONT, please try it out and let us know!
Ideally, this should work.
Nokia 2425g a ko wireless repeater ki tarah istemal kar sakte hain?
9:57 Repack nahi ho rahi hai
.XML se .cfg me convert nhi ho rhi
Bhai, Thank you for the video. Worked like a charm.
Is there a way mac of lan could be changed? I could see slightly different mac in XML so wasn't sure.
I'm not sure myself, maybe you'll be able to change it once you get root access.
What's your use case for changing LAN MAC?
@@geekytwins some ISP have mac binding to DHCP, they assign IP only if Mac address matches.
So no internet unless until I change mac to the registered one.
@@skmishra91 But brdr, that's WAN MAC, not LAN MAC.
Much awaited video 😍
Woohoooooo the long wait is finally over!! Keep Supporting!!!😍😍🥳🥳
If the same ONT locked by Tata Play Fiber (ISP), then the unlocking procedures will be same as you have shown with Airtel?
Nope, TPF has a more locked down firmware in their Nokia so it's not possible to unlock those using this method.
Telnet is not recognised as an internal or external cammand , operable program or batch file ( bhai yeah a reha hai) please help
Enable telnet first on your Windows PC.
Google steps how to do that.
Bro ye method follow karne se kya call mobile se honi chalu ho jayegi kya
Bilkul hone lg jayegi brdr, meri Android Zoiper vaali guide follow kro, after unlocking your router.
@@geekytwins thank you bro for reply.. ye bta do bro call chal jayegi kya kiyo ke airtel wale keh rhe the ke apke area me landline Calling nhi h abhi
@@abdulhannan3763 bro agar landline calling hai hi nahi area me toh nahi chlegi, jab aa jayegi area me toh chal jayegi
Navjot ji, airtel uses VLAN mapping which is why many face PADI errors, since 100 doesn't work at all. Can you make a video about using UART of G7 to discover the VLAN ID of one's connection?
Hello brdr, I'll very soon try to get a spare G7 and then use UART to check if I'm able to do VLAN scan.
Till then, I suggest you get G3v1, it has inbuilt VLAN scan feature.
I dont have backup and restore option in Maintenance Tab
I'm really pained to hear this bro, Airtel folks are locking down their router more and more.
How long does it take for it to say "Import completed". Mine just freezes after clicking import
It takes like 20 seconds at max, before the router reboots. Also, name the config file file to config.cfg before uploading.
@@geekytwins worked by renaming. Thanks!
@@mohithms524 Wonderful! Keep supporting!
Thanks for this video. Can you also please show how to make this router as a wireless network extender without LAN cable please?
That's not possible, brdr.
Life saver video, other videos are not detailed enough.
That's exactly why we had to make this video. The other videos are very sketchy. Glad you found our video helpful!
@@geekytwins Yeah, very helpful.
Mere me error aa rha hai bhai config file de skte ho kya
@@mr.shailendra5854 Koi kisi ko config file nahi deta brdr, get in touch with me.
Unable to login to telnet, it says invalid password
and I have this
ealgo="ab"
everywhere in my config. Can that cause the failure
You only need to remove that from the TelnetSshAccount section and you should be golden.
Bro does Telephone(landline)port work when router is in bridge mode?
Yes, it does work.
My router roote complete mane local internet connection laga hu but wan ip not working & internet LED bulb not blink can you help me why internet & wan ip not showing
You probably need to get the MAC binding from your ISP reset.
i have the same router but it's from a local isp, there is no setting to allow telnet and nether i have setting to backup my config. what should i do?
Then that's a problem. Check if all the settings are greyed out. If not, your ONT is probably already unlocked.
@@geekytwins All settings related to network settings are grayed out even after a hard reset. I want to use this router as a Access Point , as this is a spare router.
@@Aakash1238 brdr, you only need to change LAN settings for using this as an Access Point. I've already created a video on this topic: ruclips.net/video/zOBqZPepQs4/видео.htmlsi=t3ElIZEtadM4YOfb
when connect the fiber from other network no Link light glow !
Only use SC/APC connector.
Bro even after doing everything right and putting correct id password still the internet in not up and auth light continuously blinking
What is your ISP, bro?
Hi Great Video! I´ve been following the steps, however, I´m stuck at the moment where I have to download the .cfg file from the modem, my modem (Nokia G-2425G-A) has the option to export blocked and I don't know where can I get that. Could you help me, please?
Thanks brdr! Try to use the Inspect Element option to enable the Export button. Maybe, that'll work?
Hi Navjot after hard reset unable to connect to router wirelessly ssid showing as ALHN-C3E2 but dont know password to connect FYI i dont have LAN port in my laaptop so unable to connect on LAN Port . can you please let me know wifi keys to connect to wifi?
Hello Hemant brdr, each ONT has a separate WiFi password, afaik.
So, I suggest you get an ethernet dongle to proceed with the other steps.
Hi bro Tataplay fibre NOKIA same ONT moderm.. I dont have the Back and restore tab .. I cant export and import the Config file.. Any ways for THAT TO UNLOCK..?
No, unfortunately not!
Thanks buddy.. great help...
Happy to help! Keep showing love and support!
Can we change wan mac address?
If yes then one can use this ont instead of jio ont, just by copying jio ont mac address.
I do know that we can change the GPON serial number, will have to check if changing WAN MAC is possible. If that's possible, I see no reason why it won't work with Jio.
@@geekytwins do let me know if it works, i have a guy selling me this router, the only reason i am not buying is that i am unsure about wan mac address change possibility.
Sure brdr, I'll do some research on this in the days to come!
Do you have superadmin (NOKIA G-1425G-B)?
Can you check with AdminGPON/ALC#FGU
Thank you so much for the video. 1 more thing. how can we user other ISPs with this router ?
Brother, for that you can use ritool set command to set other paramaters like GPON SN etc.
@@geekytwins can you plz make a video on this ? or guide me how can I do it ? I don't know your discord
@@avikkarmakar7997 Will try to make a video on this very soon!
After you root it, do you think its possible to change the DNS in the WAN settings ?
Everthing can be customized after rooting, brdr.
@@geekytwins I did try to edit the strings, but for some reason the dns servers didnt change
Comd prompt showing error saying telnet is mot recognized as internal or external comd
You need to either enable telnet in windows or use a telnet client such as puTTY.
Sir I have Nokia g140 w. I need unlock procedure for mentioned device
Hi sir, I don't have access to this device so unfortunately, won't be able to help.
Sir
Can I use the process for Nokia Tata fiber ?
You can try bro, and let us know if it works for TPF as well.
Is it possible for gensys rputer from airtel?
No experience with that particular router, brdr.
sir telnet cmd 192.168.1.1 karne pe err aa raa hai,192.168.1.1 is not recognized as an internal or external comand,operable pogram or batch file
Sir, you have to enable telnet first in Windows. Google how to do that. Or you can also use an application like puTTY.
@@geekytwins SIR riptool set operatorID ALCL command dete err aa raha hei "not allow to modify it" ,
@@sanjaytimbadia70bro help me to unlock my router
@@mr.shailendra5854 What problem are you facing, brdr?
@@sanjaytimbadia70 Ping me on Discord.
Sir netplus nokia modem backup and restore not show how sir please help
Then Netplus probably have used a more locked down firmware and this video's method might not work on that ONT.
@@geekytwins sir backup and restore option Url
I don't have access to the ZTE ONT right now, so I can't provide it. Plus my Netplus router was also as locked down as yours.
Jo onu aap use kr rhe ho kya wo apc or UPC dono ko support karta h?
It supports only SC APC connector.
Voip wala bta dijiye.. telephone nhi connect ho rha
What's the issue you are facing?
Thanks Bro, It Worked
That's awesome, pal! Please share our channel within your friend circle so others can be helped as well🤩
Sir jo apne file banai h ye mil sakti h kya hume jo hum router m daal sake
Nope, you have to create your own .cfg file and use.
i have no internet in my router.
and i can not connect with telnet command it says
Connecting To 192.168.1.1...Could not open connection to the host, on port 23: Connect failed
please reply fast
Hello bro, you need to enable LAN telnet access first on your Nokia ONT by going to Security -> Access Control menu, as shown in the video.
@@geekytwins Thx Bro It Worked !!
@@user-js9hy9ub8t Happy to help
Hi.. is there any way to unlock airtel 4k stb 2nd generation??
Bro, I have never worked with any STBs so not sure.
@@geekytwins thanks.. please let me know if you can
I tried to sear ONTUSER to edit as “false” but did not find it
You have to search for LimitAccount_ONTUSER and then set it to false.
Sir my Auth and Link light not showing how I solve this problem
Bro, Link light off means you've not inserting the PON connector properly. Please do that only then will you get Auth.
now need this router to be used as wireless extender. can you help?
That's not possible bruh, there's no WDS bridging capability in this router.
I think it will this Nokia ont router unlocked work on jiofiber if possible?
It should be possible to do so, Kunal brdr, if we're able to clone the WAN MAC of the JioFiber HGW in this Nokia ONT. I'm not sure how to do it though. Will explore more and check.
@@geekytwins yes, i am using jio ont thirds party ont (tplink G3 only) without original jiofiber router like cloning GPON Serial No & WAN Mac Address & VLAN ID .. then it works with Automatic DHCP ip address from jio server...
You can find out the broadband forum in my post name is Successfully authenticating TP-Link ONT skipping Reliance JioFiber Router...
@@kunalbhattacharjee4793 Yes brdr, I was using a similar setup, G3 plus AX53, and I'd have made a video, but I disconnected JioFiber due to terrible experience.
And thanks for providing the name of the post, I'll look it up, if need be!
@@geekytwins oh, that interesting. But the post is i have created with india broadband forum.
Thank you
@@kunalbhattacharjee4793 Will check it out, for sure, pal! Thanks again for liking and subscribing!
Hi brother meri file import nahi ho rahi hai device mai import button click karne par blank hojata hai.
Any solution for this?
Bro, file ka naam config.cfg rkho, ho jayegi.
Telnet kai liye internet compulsory hai ky
Nahi brdr, internet not needed.
Can we use for other ips with normal lan cable isp
Hello sir, since this ONT doesn't support WAN routing on the ethernet interface, so that's not possible.
Can we make it back to original or locked state of Airtel if we have backed up config file.?
Yes sir, very easily! You just need to set the OperatorID back to BRTI. Will try to bring a video on this too!
Please make the video for nokia orginal locked state
After python nokia_tool.py -u config. cfg
zlib. Error -3 while decompressing data: incorrect header check
Please help
What's the firmware version you're trying to decrypt?
Mere sath bhi ye hi ho rha h. 7:41 xlm file nhi ban rhi h. Firmware version 3FE49362JJIJ50 H. Config file dedo bhai
@@sohil8999 i can help you
@@sohil8999 ping me on discord, I'll try to help you out.
@@sohil8999hogya kya bro tera
Mainai pehlai hee wifi ko hard reset kiya h
Can we change channel number using this method
Yes, I believe so!
nokia 2425 ko unlock kar liya everything went perfect but after unlocking I am trying to run it on my own network..not airtel....no internet ..despite all efforts
What do you mean by 'own network'? Are you referring to some other ISP?
Can we connect with other ISP service ?
@@abhisheks9906 You can, but I'm not sure of the procedure.
Sir, apko number chaiye
@@harkaghalley8585 Discord link in bio.
After unlocking, I can access the internet through my local ISP.
Is it a question or a statement?
I have a done a unlock with the help of your file, but after the unlock i have given factory reset, then after admin username & password not accepting. Please help me to get the login page username & password
username: AdminGPON & Pwd: ALC#FGU badme password change karlena
Brdr Sajith, were you able to login using @themadtitanx's comment?
Error : zlib.error: Error -3 while decompressing data: incorrect header check
Let's connect on Discord on some weekend!
It worked for me
That's an absolute win!!!
Bro can you provide me config file
@@mr.shailendra5854 Ping me on Discord
Telnet command is not recognized
Hello, you have to enable telnet in Windows, first. Please google how to do that.
Or you can use a telnet client such as puTTY.
Fantastic Video!
Thank you very much!
Bro i have same router from tata fiber, but there is catch no access control option available in security tab. So now how can i unlock this
I checked my friend's TPF Nokia, it's locked down to the hilt, so I'm afraid this technique wouldn't work on it.
@@geekytwinsdo you have orginal firmware without any service provider
@@shubhammukepatil Nope brdr, I don't possess it. If I get my hands on it, I'd freely share with y'all🤩🤩
@@geekytwins Thanks Man
Navjot sir..How to know airtel username and password in lock Airtel fibre router???
Username:admin
Password:admin
Can we use VOIP with the router rooted?
Yep, we certainly can, we also have videos on this topic:
1. ruclips.net/video/-XsXmSAkPlk/видео.htmlsi=Pq2W7UdC6vPbxwWu
2. ruclips.net/video/g1hX6AlknTw/видео.htmlsi=9Rw8eJPbH0ysdMIP
plz help I ma stuck
What is your issue?
Bro plz help after unlocking the router the ssid change to ALCL-HGU what is the password for that i don’t have any device which supports LAN 😢
Get an ethernet to USB adapter, it's hardly 300-400 rupees nowadays.
Bhai same mayray sath bhi yahi ho raha hai
Hlo brother i m facing config file not open in notepad plz help
.xml file not opening in notepad? That's strange!
Are you still facing this issue?
backup option not showing
please do something
Unfortunately, nothing can be done in that case.
Bhai isme printers kaise connect kaise hoga
Brdr, there's no printer server functionality in this ONT.
Bhai iska default wifi password kiya hai ALHN-FE85 yh ssid likh kr aarahi hai plzz help brother isska default password kiya hai jissay mai wifi say connect ho sako or aagaye ka process kar sako plzz Reply fast brother plz 🙏🏼
Brdr, the default password is a mystery so after hard reset, use a LAN cable to configure.
Thanks sir unlocked successful i like to know can i use railwire broadband in this unlocked nokia router i have a railwire connection can u please help me
Brdr, for that you have to change the GPON serial number and get the MAC binding reset, if railwire does it.
Can you make video on that
Brdr, sure, will try to make a video on changing MAC as well!
Bro if possible can u make serial number and MAC Change also configure with railwire like old ONT to new ONT upgrade scenario
Sure, will work on this video very soon!
Couldn’t connect to telnet
What's the error that you are getting?
notable to login in telne
Ping me on discord.
Nokia Router ko unlock karke excitel fiber me use kar payenge?
Bilkul kr skte hain brdr, you just have to ask Excitel to bind the WAN MAC and GPON SN of your Nokia ONT to your connection.
Excitel Wale ka keh rhe hai ki MAC air SN pehle change hota tha abhi nahi ho sakta
After unlock Nokia Router 2425-G, how to use this as wireless repeater/extender?
@@9506himanshu To use it as a wireless repeater,:
1. Change the LAN IP address of the ONT to something in your main router's subnet, e.g., if your main router's IP is 192.168.1.1, change the IP address of the ONT to 192.168.1.2.
2. Disable DHCP on the ONT
3. Connect the LAN port of the main router to the LAN port of the ONT and that's it.
@@9506himanshu If you pester them enough, voh krdenge.
Super bro
Happy to help!
Bro. I need your support how can I contact you?
@@jayamurugan810 Ping me on Discord, link in Bio.
Ok thanks
[Errno 2] No such file or directory Plz Help
Bro, you need to have all the files in the same location.
Sir...airtel zyxel ki unlock video daal dijiye
Don't have the Zxyel one so will be unable to produce such video. Agar kahin se mil gya toh I can make.
I have but paid
Can u plz unlock my Airtel ont
Ping me on Discord, we can talk.
After hardreset the router was starting only 2.4GHZ And not providing internet
Try hard resetting once again, brdr.
@@geekytwins nhi hora chodo new router mil jayga
@@11.05.2 Great then🤣
@@geekytwins badal bhi gya new router 🤣
Wo bhi 4 hours me complaint ke bad
Root acess nahi ho raha, still on user, after enable>shell. Password2 mang raha hai & ‘;/bin/sh;# not working
Brdr, did you even watch the whole video?
Bro everything works well. But after reset i cant connect to the wifi with old password. Now i can't access anything. Please help
Brdr, that's because WiFi credentials get reset to factory default ones. Use a LAN cable to configure after hard reset.
My device is locked i can only access user mode, backup and restore is hidden. What wil i do? Lol
That's really sad! What country are you from?
Telnet :login incorrect. Same user and password still stuck
same bro
Bros, You need to remove the ealgo="ab" part from the TelnetSshAccount section and you should be golden.
@@geekytwins thx brother
@geekytwins thanks bro. I need same method For Sercomm 4221-SR. Please
@@megatronics2132 I don't have any knowledge about unlocking this Sercomm ONT, sorry!
Good video
Thanks pal!
hi sir
Get wrong password2 in telnet process
@@rameshguthula3130 Wrong password? you need to remove ealgo = "ab" part from the TelnerSshAccount Password section, if it's there.
Bhai ALCL nhi ho rha h
What's the error you're getting?
unlock unlock unlock thanks bhai
You're welcome brdr! Keep loving our content!
Bro can you provide me config file
Airtel m port 80 ,443, 21 open ho raha hai kya ?
Not sure, sir. Will check once get access to the router.
Error 2 problem
Please be a little specific.
what is the password for ALHN-74D8
It's always random so use LAN cable to connect to the router after hard resetting.
Sir ji avaya ip setup with airtel xterm
Bro, are you referring to Avaya IP Phone? If so, we already have a setup video with IP Phone on our channel.
ruclips.net/video/gJBgTN-3Hns/видео.html
The basic steps should be the same!
telnet pe login nhi ho rha
What's the error?
@@geekytwins username toh theek jara but password jo set kiya dal rha firbhi login nhi hua
@@hritikraj7028 Remove the ealgo = "ab" part from the TelnetSshAccount section.
@@geekytwins done
@@geekytwins bhai airtel dasnet h660gm ko bhi unlock krne ka kuch batao
Upload failed: file invalid!
ab kya kare 11:40
What's your hardware version? Also, are you properly renaming the file to config.cfg?
thank you brdr🙂. is jagah 7:15 mistake ho rha tha.
@@9506himanshu brdr, we're glad to help! Please help our channel grow by getting your friends and family to subscribe!
@@9506himanshukya mistake hai bhai maine to sab kiya nhi ho rha upload
@@VinayYadav-il3zt Ping me on Discord.
Pasword... Superadmin?
😚🤌🏻
Brother, your request has been fulfilled, please get 10 more subscriber to our channel!🥳🥳🎉🎉
Please UNLOCK Gx Titanium 2122A-PRO
Don't have that with me and not sure if that can even be unlocked!
Upload failed invalid file😮
Make sure you do that process properly and name the file to config.cfg
Me too...
@@rahulsiddhardh3701 Do the steps as I mentioned.