I’ve attended to a few of these months and years later, the moisture always gets in and corrodes the copper causing a hot joint . Anyone who’s thinking of doing it use a underground joining kit, contains inline joiners and resin to make it completely waterproof ! This may work in a pinch but it won’t last forever
I have not located splicing tape for waterproof direct burial. Above ground, dry location yes, but over time in the ground it does not hold up. Am I wrong?
@robertplas3947 yes, scotch/3m makes a waterproofing tape that is the same thing that is included in the UF direct burial splice kit. I would recommend using something like the process shown here or a heat shrink waterproof tubing over the top, but at that point you might as well buy the direct burial kit for $13-15....
Gilligans island would have loved some power, but they wouldn’t have had such an advanced splice kit to fix their broken wire. Thanks for your support!!!
The dumbest part is he’s spending more on that silicone and connectors then he would on a proper uf direct burial splice. Also very fitting using the Walmart bag to finish off
I like the simple braid and some electrical tape; I like the silicone idea, but what I would do is use a short pvc pipe and fill it with silicone, wires within of course.
That's what I figured would work, I did everything you did except I twisted and soldered the wires because I didn't want a 20-minute round trip to the hardware store. thanks for your demonstration. Git r done!
These kind of fixes are a joke. You are better off replacing the whole wire from house to garage like I did. Alot safer. And another thing, that hole dont look that deep. Has to be over 12-16 inches. I put mine knee deep to be safe.
This video actually just saved my bacon this morning. similar situation, a wire out to a well got dug up by our driveway company's excavator. I Was rying to figure out how to waterproof it when I splice it back together thanks for the tips.
Wolfman Dan Thank you so much for your support. We’re getting a lot of heat from the professionals on this video and we really appreciate guys like you that work for a living and have common sense hang in there
This just saved me over 5 thousand dollars from having to use a grossly overpaid company to do this same thing. Thank you James and I hope you do more fix it yourself videos!!!
Trying to be respectful here, you have a construction company not an electrical company. Nothing about what you were doing here is code compliant, safe, or UL listed.
Joe Hall It’s the apocalypse,,, You lose power to your well, your life supply. You only have the tools shown in the video. You decide to die due to the extreme danger and lack of code compliance. I don’t know how I survived this video i think I saw my life flash before my eyes.
Construction hacks You have a good amount of videos, you helped a good amount of people, you are educating people. So when this video came up I figured it was my turn to help educate you some. I’m just trying to help just like you. Didn’t mean to offend you, but simply just wanna educate you that there is many more alternative than what you have done.
EXACTLY but he will argue his 'HACK' till the cows come home and other idiots will follow his stupid advice. He's too ignorant to realize that electricity flows through wet ground. He'll wake up one day in the rain when he grounds himself and his hand blows off.
Should have used Noalox since your using an aluminum splice block on copper conductor or use copper crimp connector and noalox since it prevents corrosion and increases conductivity then put mastic on the connection and use shrink tube over that you could then use what ever outside of that if you want more protection
Better use on small wago/electic cube,cable hermetic can and silicone inside evntually before it a small amout of pipe plastic, its gonna survive until next cut.
Shiro Campos They sell them at Lowe’s in the electrical section it’s a really cool connector and I don’t know what it’s called but you’ll find them at Lowe’s in the electrical section right around where the wire nuts are
You can buy this as well. Safer and approved way. Last thing you want is voltage leaking into the ground in the future. Ouch. www.lowes.com/search?searchTerm=IDEAL+1-Count+28mm+8-in+Heat+Shrink+Tubing
Shiro Campos thank you for supporting our channel. We made this simple fix for the common sense oriented people. iIf you look at the comments we have really offended the professionals so thank you for your support hang in there and keep up the good work.
Fixing a well wire with a plastic bag to make it waterproof is multitasking at its finest! Not only are you solving your wiring problem, but you’re also giving that plastic bag a new purpose. Since it takes up to 1,000 years to decompose in a landfill, it should keep your well wire waterproof for quite some time. It’s a revolutionary move in saving both your wiring and the planet-talk about making a difference one plastic bag at a time! That was very liberal of you!
This video pretty old, so i would recommend a jbox and splice it with waterproof wire nuts that are filled with dielectric silicone less messy, for new people watching
@@constructionhacks9293 I might try the old plastic bag round a cable trick. I've just sent an email out to the rest of the lads informing them to drop the resin and just buy tonnes of insulation tape and keep the plastic bags!!! And the bonus of it being fun. Well what a bonus 😂🤯
relentlessltz This video is not for professionals, I’d recommend not watching anymore of these videos because it will offend your professional opinion and you may learn something new which will offend your professional opinion more and more. Again don’t watch these videos made for common sense people that don’t like professionals such as yourself. Best wishes!
Another way is to spray the heck out of it with flex seal, that's what I did, or buy the flex seal can and paint brush it on, make it nice and thick. That's what she said 😄. It worked for me, just an idea.
nicholas manfredi many farms need water for crops and animals. Many hard working American farms don’t have the leisure to wait on a big headed high dollar electrician while their animals and crops die. Maybe I’m lucky but me and many old timers have had this exact hack work for years. Wish you the best!
About using GB Electrical HST-1300 Underground Cable Splice Kit? Simple, neat, code compliance and only cost under 20 JB dollars.😂 . This is OK, but not as a permanent repair. But I give you thumbs 👍 because yore not a lib!
@@constructionhacks9293 I just hope there is a 2024 election. We might all be dead by then by a nuclear war. Remember what President Donald Trump said in a 2018 rally. He said there's powerful successful wealthy rich people that will do anything it takes for me not to be president. Trump was talking about the Deep state. President Trump was right again they rigged the election.
Never watch none of your stuff on your Channel. Once I heard President Trump name I said damn I'm going to subscribe to that guy's Channel. He's talking good about the 45th president. Where is that subscribe button at. Let me give a thumbs up. I'm from Macomb County Michigan where trumpland over here.
Thank you sir very creative interesting,😀 but how do you know everything was sealed tight ? 😀 Whould you trust to work bearfoot Rainey day or on top of that wet ground ? Heat shrink or HS x2 faster sir ?
It’s a quick fix in a tight spot and yes it’s still sealed. I go out occasionally and wet the ground and walk bare foot. Then dig up the wire and lick it just in case. It tingles a bit but don’t think there is any problems. Thanks for your support!
@@constructionhacks9293 funny 😂 No you dont lick it Sorry yap you are right I should be more supportive Thank you shearing great info kniwledge & exprience sir. I just wanted know how real No negative intention sir MJ (basket ball star) said he failed so many thays why ge succeeded So please keep creating great awesom wonderful videos please. I just wanted check to see how safe it is No negative feeling sir Anyway thank you great creative video sir 😀🙏.
Looks decent. I've done it this way before. Lately been using flex wrap (saran wrap on a 6" roll for packing) rather than bags but same idea. Some glue lined shrink tubing over the splice block would be a good alternative to the tape - if available.
@@constructionhacks9293 don’t post stuff when you don’t know what you’re doing! Someone can get hurt, that’s not the environment to experiment in. What if that line finds ground while someone is around or working on it and they get hit? Best case, it works for a decade and then starts to heat up, now your voltage is dropping and damaging equipment. There are products out there (Dryconn) that are UL listed for direct bury for $7-$8. Being willing to learn is also a great idea for your channel, I’m not attacking you personally but surprised that you post a video without any reference for NEC or how a tradesman would repair it.
Lou Ann Watt Thank you for your support. I think electricians “professionals”don’t want people to see this video because it empowers the people to not need them anymore. Thank you again for your support and common sense.
ive seen guys just take the silicone caulk tube whole tube & cut the bottom off & slide the wires into it.. but they had extra wire to work with & this was for wires in wet conditions, In a sump pump i think there called for Waste & then to the Sand mound
That’s the way to do an underground joint? Seriously? Have you never heard of shear bolts and resin joints? If you did this shit on one of my jobs you would be off site within seconds! You should immediately stop giving any electrical advice.
I’m thankful for your comment. This is a video for open minded people who need a quick fix on a farm where electric power can be life or death for animals. This video is not for “professionals” such as yourself. It’s for people with common sense. Good day Sir
😂 so if there on a farm and could be life or death situation do you really think they will have a tube of silicone???? Nooooo I doubt it, shocking job that
Remember to use a lowes bag and not a Democratic bag. It'll cost to much if you do. better replacing the whole wire in that case. and increasing the fuel costs so the taxpayers can pay for it.
Oh that one is to good especially the serious responses LMMFAO! Make sure to put your sun glasses on today we want to make sure to protect everyone else from the sun. 😂
Electricians' Community UK I think it interesting that at one pint and time in history there were men burned at the stake for telling others that numerous galaxies existed. This works as a quick fix for folks in a tight spot needing temporary power to a well not wanting to spend hundreds of dollars and waiting on a schedule for y’all to come with your hard hat and nose up in the air with a huge bill for them. Good day sir!!!
Trevor Ord I’ll break it down for you, this goes way over professionals head. When the majority of people think there is only one way to do something and someone comes along with a simpler easier fix it offends them and they state their opinion as fact. It’s hard for professionals such as yourself to not get offended at my videos because they are so simple and work so well. It may be better if you don’t watch my videos you may learn something which will offend you more. 😎
We will have to call that a Trump joint. This is backwoods and will last about as long as one of his many marraiges! They make kits where you use heavy shrink tube or a plastic tube that encases the splice with epoxy.
Amen. Slow Joe would still be out in the driveway staggering along scratching his head trying to figure out how to make this repair cost the taxpayers $2,000,000. There would be a study done on which big box store plastic bag is best for the wrap and how to insure everyone involved was addressed with their preferred pronouns.@@constructionhacks9293
I wish he had not mentioned DJ trump...leads people to believe all conservative voters are commiting the same electrical code horrors he just made. But...hope it works
What you've been looking for the PU Chemical for your this waterproof junction box gasket foam with Waterproof and fireproofing function, should be here ruclips.net/video/LQCDt1hGpJ8/видео.html
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
Just FYI, they make splice kits that come with adhesive lined heat shrink tubing that are rated for direct burial.
4 People in a tight spot thanks for your support!
I’ve attended to a few of these months and years later, the moisture always gets in and corrodes the copper causing a hot joint . Anyone who’s thinking of doing it use a underground joining kit, contains inline joiners and resin to make it completely waterproof ! This may work in a pinch but it won’t last forever
Hey Sport,
thanks for your support!
I am happy you are following the 1923 electric code from somewhere in Asia.
😂😂
@@robertplas3947 they are used to working with small things!
Good lord… they make splicing tape for a reason! It actually bonds to itself and is more durable than silicon sealant.
It’s a way to do it that works! Thanks for your support!
I have not located splicing tape for waterproof direct burial. Above ground, dry location yes, but over time in the ground it does not hold up. Am I wrong?
@robertplas3947 yes, scotch/3m makes a waterproofing tape that is the same thing that is included in the UF direct burial splice kit. I would recommend using something like the process shown here or a heat shrink waterproof tubing over the top, but at that point you might as well buy the direct burial kit for $13-15....
This is a joke right? Don’t think this method would pass code on Gilligans island.
Gilligans island would have loved some power, but they wouldn’t have had such an advanced splice kit to fix their broken wire. Thanks for your support!!!
They only make a hundred different style, direct burial junction boxes. They even come pre-filled with silicone/grease.
As a Licensed Electrician, I don’t recommend this technique.
Thanks for your support for a channel. It’s a hack for somebody in a tight spot that needs a quick fix!!!
Let me guess, you recommend calling a licensed eletrician.
As a non licensed electrician , I do not recommend… lol
The dumbest part is he’s spending more on that silicone and connectors then he would on a proper uf direct burial splice.
Also very fitting using the Walmart bag to finish off
@@smeric28 actually, in reality I was looking for a video on the UF splicing connector
You made your wires Great Again..🇨🇦🇺🇸🇨🇦🇺🇸
Lol thank you for your support!!!
MWGA !!!🤣🤣🤣🤣
DIY Dave teaching DIY Dave's... the blind leading the blind! 😂
Thanks so much for your opinion
“ I can see clearly now the rain is gone”
And the wire still works.
Good day sir!
What if you don't have a Low's in your general area?
I'm Australian - Would a Woollies bag do in a pinch?
Lol it’ll do
Thanks for your support!
I like the simple braid and some electrical tape; I like the silicone idea, but what I would do is use a short pvc pipe and fill it with silicone, wires within of course.
Will a Menards bag work?
It’ll be better and last longer!!!
Thanks for your support!!!
That's what I figured would work, I did everything you did except I twisted and soldered the wires because I didn't want a 20-minute round trip to the hardware store. thanks for your demonstration. Git r done!
These kind of fixes are a joke. You are better off replacing the whole wire from house to garage like I did. Alot safer. And another thing, that hole dont look that deep. Has to be over 12-16 inches. I put mine knee deep to be safe.
Thanks for supporting our channel... glad you’re being safe!!!
He's a regular clownshow
This video actually just saved my bacon this morning. similar situation, a wire out to a well got dug up by our driveway company's excavator. I Was rying to figure out how to waterproof it when I splice it back together thanks for the tips.
Wolfman Dan Thank you so much for your support. We’re getting a lot of heat from the professionals on this video and we really appreciate guys like you that work for a living and have common sense hang in there
This just saved me over 5 thousand dollars from having to use a grossly overpaid company to do this same thing. Thank you James and I hope you do more fix it yourself videos!!!
@@rickrichards1561 thanks for your support!
Trying to be respectful here, you have a construction company not an electrical company. Nothing about what you were doing here is code compliant, safe, or UL listed.
Joe Hall
It’s the apocalypse,,,
You lose power to your well, your life supply.
You only have the tools shown in the video.
You decide to die due to the extreme danger and lack of code compliance.
I don’t know how I survived this video i think I saw my life flash before my eyes.
Construction hacks You have a good amount of videos, you helped a good amount of people, you are educating people. So when this video came up I figured it was my turn to help educate you some. I’m just trying to help just like you. Didn’t mean to offend you, but simply just wanna educate you that there is many more alternative than what you have done.
I kinda like THIS way of doing things! Great job !
EXACTLY but he will argue his 'HACK' till the cows come home and other idiots will follow his stupid advice. He's too ignorant to realize that electricity flows through wet ground. He'll wake up one day in the rain when he grounds himself and his hand blows off.
Joe Hall
The electric connectors are UL listed,
The electric tape is too,
The silicone 🤔,
The Lowes bag not so much,
The wire splice still working 👍🏼
Should have used Noalox since your using an aluminum splice block on copper conductor or use copper crimp connector and noalox since it prevents corrosion and increases conductivity then put mastic on the connection and use shrink tube over that you could then use what ever outside of that if you want more protection
Thanks for your support! These aluminum straight splicers are more clean than the copper.
Better use on small wago/electic cube,cable hermetic can and silicone inside evntually before it a small amout of pipe plastic, its gonna survive until next cut.
Thanks for your support Maurycy!
How about NoLox on wire ends
It’s a hack when your on a tight spot.
Thanks for your support!
What’s the name of the connector you used? Thanks in advance!
Shiro Campos They sell them at Lowe’s in the electrical section it’s a really cool connector and I don’t know what it’s called but you’ll find them at Lowe’s in the electrical section right around where the wire nuts are
Awesome! Thanks again for sharing, I appreciate you.
You can buy this as well. Safer and approved way. Last thing you want is voltage leaking into the ground in the future. Ouch. www.lowes.com/search?searchTerm=IDEAL+1-Count+28mm+8-in+Heat+Shrink+Tubing
Shiro Campos thank you for supporting our channel. We made this simple fix for the common sense oriented people. iIf you look at the comments we have really offended the professionals so thank you for your support hang in there and keep up the good work.
WeatherNut27 Thank you for your support hang in there and keep up the good work
Fixing a well wire with a plastic bag to make it waterproof is multitasking at its finest! Not only are you solving your wiring problem, but you’re also giving that plastic bag a new purpose. Since it takes up to 1,000 years to decompose in a landfill, it should keep your well wire waterproof for quite some time. It’s a revolutionary move in saving both your wiring and the planet-talk about making a difference one plastic bag at a time! That was very liberal of you!
Favorite part of the video was “liberal”!! Loved the video.
@@RD-sl8yl thanks for your support! 😂
I did this and it worked well for a week until our dog dug it back up and chewed the connections. You owe me a new dog!
sB Thanks for supporting our channel!!!
Waterproof J box then silicone seal the box and fittings 👍🏾
@@itzjordandoee4778 this is the way!
Sorry to hear who you support 😔
This video pretty old, so i would recommend a jbox and splice it with waterproof wire nuts that are filled with dielectric silicone less messy, for new people watching
Thanks for your support! I’d use the new hybrid silicone instead of the old silicone!
Construction Hacks = Complete Hacks
Thanks for your support!!!
😂😂👏👏 fantastic video, these kind of joke videos are just what we need in 2020! Well done. 👍
Alex Thorpe
two years still working
Maybe one day you should try it just for fun maybe You’ll learn something new.
@@constructionhacks9293 I might try the old plastic bag round a cable trick. I've just sent an email out to the rest of the lads informing them to drop the resin and just buy tonnes of insulation tape and keep the plastic bags!!! And the bonus of it being fun. Well what a bonus 😂🤯
Construction Hacks you’re probably going to kill someone, Give up and leave it to the professionals.
relentlessltz
This video is not for professionals, I’d recommend not watching anymore of these videos because it will offend your professional opinion and you may learn something new which will offend your professional opinion more and more. Again don’t watch these videos made for common sense people that don’t like professionals such as yourself.
Best wishes!
Alex Thorpe
I’m glad your coming around. Resin cracks and leaks over time. I’d try electric tape and silicone next time!
Good luck!🍀
Code calls for clear silicone and a Home Depot bag
I agree the clear silicone holds up a little better, but the Lowe’s bag seems a bit thicker than Home Depot!
Lol thanks for your support!
Bwahahaha you are tooooo funny. Thanks for the laugh
Thanks for your support, it is funny 😆 because it’s simple and easy.
Thanks for the support!
And remember Lowe’s bags work better than Home Depot bags!
You had me at President Trump. Thanks for the Video, Really helped me out.
Let’s go Brandon!
Thanks for your support!
This video exactly what I needed.
Thanks for your support!!!
Why? So you can know how not to do something?
Originally was the depth of wire burial ok? Just asking for information
Typically your wire should be in grey conduit at least 18” to the top of the conduit.
Thanks for your support!
The fact that you stated you support agent orange is enough for be to delete your video
You clearly like the ruination of our country you scoundrel!
Another way is to spray the heck out of it with flex seal, that's what I did, or buy the flex seal can and paint brush it on, make it nice and thick. That's what she said 😄. It worked for me, just an idea.
Thanks for supporting our channel!!!
good job ! not approuved by any building codes, but whatever, it gets the job done so why not :P
Thank you for your support!!!
I did one like that, lasted 20 years but now have a ground fault.
Thanks for your support brother!
DAMM that is the DUMDEST shit I've ever seen!!! You should be arrested for endangerment !!!!!!!!!!!!!!!!!!
You should be arrested for close mindedness you liberal!
James, which U.S. State are you in?
Thanks for supporting our channel
@@constructionhacks9293 You're welcome
Don’t be a penny wise. Use the underground junction boxes made for this exact application and noted by others below.
@@douglaswilliams9634 you should try it this way! You might learn something!
“Hack” is the only appropriate word I’ve seen in this video.
nicholas manfredi many farms need water for crops and animals. Many hard working American farms don’t have the leisure to wait on a big headed high dollar electrician while their animals and crops die. Maybe I’m lucky but me and many old timers have had this exact hack work for years.
Wish you the best!
Oops... I said NoLox which is NOALOX
Thanks for your support!
No worries!
did Trump show you how to do this?
To see what Trump taught me you'll need to see my video on how to get things done and how to build a wall hack.
About using GB Electrical HST-1300 Underground Cable Splice Kit? Simple, neat, code compliance and only cost under 20 JB dollars.😂 . This is OK, but not as a permanent repair. But I give you thumbs 👍 because yore not a lib!
Hey thanks for your support! You made me laugh! Say no to libtards!
this is a hack for sure. lol
OSHA approved splice!
President Donald Trump 2024 he will win his third term
We can only hope,
Biden is turning us into a Third World country!
@@constructionhacks9293 I just hope there is a 2024 election. We might all be dead by then by a nuclear war. Remember what President Donald Trump said in a 2018 rally. He said there's powerful successful wealthy rich people that will do anything it takes for me not to be president. Trump was talking about the Deep state. President Trump was right again they rigged the election.
@@jamesw4912 agreed! Things are going down hill quick!!!
Never watch none of your stuff on your Channel. Once I heard President Trump name I said damn I'm going to subscribe to that guy's Channel. He's talking good about the 45th president. Where is that subscribe button at. Let me give a thumbs up. I'm from Macomb County Michigan where trumpland over here.
@@jamesw4912 Trump: he’s still my President,
Not the imposter who stole the election!
Thank you sir very creative interesting,😀 but how do you know everything was sealed tight ? 😀
Whould you trust to work bearfoot Rainey day or on top of that wet ground ?
Heat shrink or HS x2 faster sir ?
It’s a quick fix in a tight spot and yes it’s still sealed. I go out occasionally and wet the ground and walk bare foot. Then dig up the wire and lick it just in case. It tingles a bit but don’t think there is any problems. Thanks for your support!
@@constructionhacks9293 funny 😂
No you dont lick it
Sorry yap you are right I should be more supportive
Thank you shearing great info kniwledge & exprience sir.
I just wanted know how real
No negative intention sir
MJ (basket ball star) said he failed so many thays why ge succeeded
So please keep creating great awesom wonderful videos please.
I just wanted check to see how safe it is
No negative feeling sir
Anyway thank you great creative video sir 😀🙏.
@@constructionhacks9293 😆
Looks decent. I've done it this way before. Lately been using flex wrap (saran wrap on a 6" roll for packing) rather than bags but same idea. Some glue lined shrink tubing over the splice block would be a good alternative to the tape - if available.
Thank you for your support!
I like that you’re only liberal with the caulk! 🇺🇸❣️🇺🇸❣️🇺🇸
dont use these bolts its much better to twist. The screw in that bolt connecter bites into the wire over time it snaps
Thanks for your support!
As a supporter of not being an idiot, don’t do this. Buy the heat shrink kit.
Don’t look into the mirror too hard!
I knew he was a scab before he said Donald Trump, by the hokey sheet he's doing! The best way he knows! LMAO DO NOT DO AN UNDERGROUND SPLICE THIS WAY!
@@Clifton_Clowers597 YOLO! You should try it!
@@Clifton_Clowers597 also I’m guessing if you are a Democrat, you wouldn’t do anything yourself anyway!
That tape and silicone is worthless underground and the water/dirt is going to run up the jacket and cause corrosion.
Are you a scientist?
@@constructionhacks9293 don’t post stuff when you don’t know what you’re doing! Someone can get hurt, that’s not the environment to experiment in. What if that line finds ground while someone is around or working on it and they get hit? Best case, it works for a decade and then starts to heat up, now your voltage is dropping and damaging equipment. There are products out there (Dryconn) that are UL listed for direct bury for $7-$8. Being willing to learn is also a great idea for your channel, I’m not attacking you personally but surprised that you post a video without any reference for NEC or how a tradesman would repair it.
I support any Republicans that can KICK “biteme” out of the White House!!!
Thanks for your support!
You gotta be kidding me. Folks, don’t do this. This guy just made a great big fool of himself.
As Forest Gump would say… thanks for your support!
This is not the best method but will work just fine. Take it easy everyone, you will be ok.
Lol,
Thanks for supporting my channel!
yeah, it'll work fine until it fails..
Why will this not work?
It works
Thanks for the comment
People in Tennessee would say, “ I KNOW THAT’S RIGHT!”
Lou Ann Watt Thank you for your support.
I think electricians “professionals”don’t want people to see this video because it empowers the people to not need them anymore.
Thank you again for your support and common sense.
You’re welcome. Doug
⚠️ Please don’t anyone do this!!!! This does not meet code!! And is very unsafe!! It has a huge potential for failure
After few years my electrical liquid tape failed. After tape, 100% Silicone should seal better.
For your kind words and support!
ive seen guys just take the silicone caulk tube whole tube & cut the bottom off & slide the wires into it.. but they had extra wire to work with & this was for wires in wet conditions, In a sump pump i think there called for Waste & then to the Sand mound
lol thanks for your support it’s definitely a hack when your in a tight spot and no electric supply store near by!
This will fail, seen it done before. Lasts a few years at best
Let’s go Brandon!
It’s a quick fix …
Thanks for your support!
Of course it will, trump was involved.
So this is the guy. I've always wondered who in the world would do stuff like this whenever I find it. Now I know. People. Please don't do this.
You should be an inspector! Yolo! and thanks for the support!
Oh my gosh r you for real bro. With all Respect and no offended. This is real bull.shit right there Lol
Show me your video on a quick splice when out in the field to fix a well that waters animals and there are no stores opened.
That’s the way to do an underground joint? Seriously?
Have you never heard of shear bolts and resin joints? If you did this shit on one of my jobs you would be off site within seconds!
You should immediately stop giving any electrical advice.
I’m thankful for your comment. This is a video for open minded people who need a quick fix on a farm where electric power can be life or death for animals.
This video is not for “professionals” such as yourself. It’s for people with common sense. Good day Sir
Trevor Ord
I would recommend electric tape and silicone instead of those leaky resin joints. 😉
Oh ya! Silicone all the way!
Jon K Thanks for your support brother our channel was designed and made for common sense out of the box thinkers like yourself
😂 so if there on a farm and could be life or death situation do you really think they will have a tube of silicone???? Nooooo I doubt it, shocking job that
Looks like a Donald Trump brand fix. If you think that's waterproof I've got some $400 gold shoes to sell you.
Remember to use a lowes bag and not a Democratic bag. It'll cost to much if you do. better replacing the whole wire in that case. and increasing the fuel costs so the taxpayers can pay for it.
The whole time I was watching this I was thinking: “Who would be stupid enough to do this?”. Then you mentioned Trump and I got my answer.
I was thinking exactly the same thing. I don't need advice about anything from someone that supports that POS.
Let’s go Brandon!!!
Brandon… That’s a much better option.
Thanks for your support and the higher prices on everything!
Junk installation. Ever heard of an underground splice kit?
Only a few times,
In the comments,
Lol
Thanks for supporting our channel!!!
That is amateurish, please find another source of information.
@@jozefpalica my videos tend to offend people who don’t think outside the box!
This guy's hilarious
Thanks for your support!
you should be arrested for that!
Thanks for supporting our channel. We should all be arrested for something I’m glad this is it for me.
Good fix. Too bad about the support for traitor.
Thanks for your support!
I like And miss Trump, but respect your beliefs!
I like the use of silicone. Would of never thought of thatc
Thanks for your support brother!
So glad you support Don-OLD.
He does everything wrong also.
.
@@tried2call260 when people think outside the box it offends the takers of society!
Oh that one is to good especially the serious responses LMMFAO! Make sure to put your sun glasses on today we want to make sure to protect everyone else from the sun. 😂
Thanks for your support!
Can confirm, Trump quality repair
Thanks for your support!!!
Trump 2024!!!!!!!!!!!!!!!!!!!!!!!!!!!!
We can only hope!
Wow, you sir are a danger!
Electricians' Community UK
I think it interesting that at one pint and time in history there were men burned at the stake for telling others that numerous galaxies existed.
This works as a quick fix for folks in a tight spot needing temporary power to a well not wanting to spend hundreds of dollars and waiting on a schedule for y’all to come with your hard hat and nose up in the air with a huge bill for them. Good day sir!!!
@@constructionhacks9293 if only there were cheap approved, certified products to join cables underground.
What the hell has burning people at the stake got to do with this?
This is honestly worrying!
Trevor Ord
I’ll break it down for you, this goes way over professionals head. When the majority of people think there is only one way to do something and someone comes along with a simpler easier fix it offends them and they state their opinion as fact. It’s hard for professionals such as yourself to not get offended at my videos because they are so simple and work so well. It may be better if you don’t watch my videos you may learn something which will offend you more.
😎
Lock him up 😂
Thanks for your support!
Love the Trump comment......hahahahah!
Me too!
Thanks for the support!
This is sarcasm, right?
We will have to call that a Trump joint. This is backwoods and will last about as long as one of his many marraiges! They make kits where you use heavy shrink tube or a plastic tube that encases the splice with epoxy.
Everybody knows a different way, I like this way, it works and is easy!
We certainly can’t call it a Biden joint, because this actually works!
Amen. Slow Joe would still be out in the driveway staggering along scratching his head trying to figure out how to make this repair cost the taxpayers $2,000,000. There would be a study done on which big box store plastic bag is best for the wrap and how to insure everyone involved was addressed with their preferred pronouns.@@constructionhacks9293
@@BrianDoherty-e8s lol 😂 I was thinking he would spend most of his time just figuring out where the Teleprompter was.
This wire is "fixed" like Trump fixes the countries problems. Yikes.
Thanks for your support and I agree Trump is making America Great Again👍🏼👍🏼👍🏼
Oh no!
@@elkalibreph576 yes 👍🏼
hack contractor
Sir, don’t be so hard on yourself and thanks for supporting our channel!!!
Good presentation, but Keep your talk without using s political innuendo, please.
There is no I in politics!
Common dude
Thanks for your support!
Let's go Brandon!
Amen brother!!!
Let's go yo mama
@@ducksticks6707 what are you 4 years old. Then again if you voted for Biden your mental capacities probably about equivalent to a four-year-old
Genius
Thanks for your support!
Paul!
Heat shrink cable repair sleeve MUST! Now it's some kind of JOKE, better not to pee on the ground where this "repair" is.
Trys: I recommend a bathroom 🚽 it’s safer
There are many more alternatives you could have used. Just trying to be helpful.
Joe Hall thanks for the response. This is an alternative. Power to the people.
Liquid. Electrical. Tape.
Thanks for supporting our channel!!!
Bring Donald Trump to work day.😊
MAGA!!!
I wish he had not mentioned DJ trump...leads people to believe all conservative voters are commiting the same electrical code horrors he just made. But...hope it works
This is the instructions I was looking for for my repair project, and with the Trump comment, now I know it's good advice!
Thank you for supporting our channel!!!
Wtf romex on graund
Thanks for your support!
Trump 2024! FJB
Amen brother!
Thanks for your support!
This video needs to be removed…
Your comment needs to be removed!
Thanks for thinking outside the box!
What you've been looking for the PU Chemical for your this waterproof junction box gasket foam with Waterproof and fireproofing function, should be here ruclips.net/video/LQCDt1hGpJ8/видео.html
Thanks for your support!
Love the joke!
🇺🇸🇺🇸 Trump Vance 2024 🇺🇸🇺🇸
Dang man when you said you are a TRUMP supporter I IMMEDIATELY SUBSCRIBED 👊🇺🇸 Great field fix too 👊👊🇺🇸🇺🇸🗽🗽🦅🦅🙏🙏
Hey thanks brother,
Keep on it!!!
Go Trump!!!