Nice video! Very descriptive with good info for us beginners. How about a reassembly video? Would like to see how you reconnect the card reader board and ribbon connectors before I try it!
One thing to notice !! The side frame where the usb c , you should not try to remove the back cover with that , the back cover is starting where the speakers grils are ,put your finger above speakers and pull
I broke the sd card spring system by pulling the sd card (the reader still works) do I need to change it or can it be fixed? my stupid ocd just doesnt let it go
Might be a silly question but what version of the wowstick do you have? I actually bought one, and it's the same as the one in the link - the two circular buttons - but yours have arrows? O_o Is it just an earlier version?
Quick question: I always swap the housing shells on my OLEDs, I've done 3 now with no issue. On this last one, I have an issue of the Switch not recognizing the right joycon when it's connected in the rails. I tested the joycon on another switch and it reads it just fine, so I assumed I damaged the ribbon cable on the problem Switch and ordered a new rail for that side. I swapped the new rail in with no issue, and the Switch still won't recognize any joycons that are locked in. There is no visible damage anywhere. Is there a sensor or something anywhere on the board that registers when joycons are connected? I'm not sure what else could be the issue other than the ribbon cable, but it does the same thing with a brand new one.
This video deserves more love. No unnecessary talk, just what is stated on the title. ❤ You rock, sir. Deeply appreciated.
Nice video! Very descriptive with good info for us beginners. How about a reassembly video? Would like to see how you reconnect the card reader board and ribbon connectors before I try it!
One thing to notice !! The side frame where the usb c , you should not try to remove the back cover with that , the back cover is starting where the speakers grils are ,put your finger above speakers and pull
I've been wondering what that circle on the top of the console is. Maybe it pops out if the battery swells?
Thanks a lot!) maybe it is possible to know resistance values on lcd connector resistors please?)
Do you have a video on the battery replacement?
That part is giving me the most grief...
Bro, where is eMMC storage located on Nintendo switch oled
I broke the sd card spring system by pulling the sd card (the reader still works) do I need to change it or can it be fixed? my stupid ocd just doesnt let it go
Is the gray part like housing to protect the display from components?
Heat shield
Might be a silly question but what version of the wowstick do you have? I actually bought one, and it's the same as the one in the link - the two circular buttons - but yours have arrows? O_o Is it just an earlier version?
Dam is so hard to take put the back cover , i cant open it up !!
I was able to reset my switch by reconnecting the battery. Thanks
Quick question: I always swap the housing shells on my OLEDs, I've done 3 now with no issue. On this last one, I have an issue of the Switch not recognizing the right joycon when it's connected in the rails. I tested the joycon on another switch and it reads it just fine, so I assumed I damaged the ribbon cable on the problem Switch and ordered a new rail for that side. I swapped the new rail in with no issue, and the Switch still won't recognize any joycons that are locked in. There is no visible damage anywhere. Is there a sensor or something anywhere on the board that registers when joycons are connected? I'm not sure what else could be the issue other than the ribbon cable, but it does the same thing with a brand new one.
L
Oh I fixed this a while back, its all good now@@SealToeHDProductions
Why do you sound like raysworks? Great content!
Handy. Thank you.
My fan stopped making any noise after being really loud for a while and way too scared to do all this
what happens if you bend the heat pipe? Like a little bit
what i hate about these videos is they never show u the SIZES of scres that are removed
Hi
Hi!
Why the fuck they placed different screws there 🤦♂️