I’m a big fan of your channel, and I really enjoy the content you put out. The cars that I mainly paint are 60’s and early 70’s muscle cars, but I really appreciate the kind of work you do. Brothers like you are the ones that keep our industry alive. Thank Trigger Man!
Thank you Killer_Bee if you come across a 70ish Olds Cutlass you want to get rid of think of Ole Trigger 💭💭 😎💪🏼 Thank you again brother I appreciate you watching
Triggerman..I would not have believed that if I didn't see it..have to believe it..cos I'm looking right at it..and wow!!..nice outcome from such a small compressor...watch out Underground Paint King!!!..Triggy comin for ya!!..😂😂😂..nice info Triggerman and as usual keep doing your thing man..God bless.
I did mobile work with that gun for years. Its perfect for bumpers too. You can dial it in on the fly for fog light recesses and open it up with a pretty wide fan.
First off best video quality out of all these paint channels! 4k hittin, second I was curious about the mobile equipment needed as well thanks for making this video trigga 🎉
You're more than welcome James. Glad you can appreciate the effort and quality of the videos every day I try to get better and better to make it a smoother and more enjoyable experience for you guys. Good to hear that it's being noticed. Thank you again James 🫡
@@thetriggerman954 your welcome brother , every video I put it on highest settings cause I’m blind and like quality but you be surprised even the biggest channels be running low quality smh but I know the trigga fam see and appreciates your effort!
Trigger man I have an old sata 3000b mini jet have .8 and 1.2 set for it never used the .8 but 1 time the 1.2 gets good results 1 like 1.4 in full size gun like a little paint with my air i'm 76 y.o. been painting for 60 years still learn something every day.
Those ridgid compressors are beast I run 2 roof nailers off the joint and runs all day long! Good shit showing people these things are possible. Best small compressor for the money is the husky 30 gallon 2 stage oiled for running mobile. Good video
😮Wow, really nice job that gun did with that little compressor. I've been wanting to re-spray the hood and trunk lid on my car , but was not sure if it would be strong enough to work.
I use a spray gun similar to this gun for doing ghost patterns . I use a small compressor with an auxiliary tank. I don't like to hear noise, so my naibors don't complain about the noise.
Lol , I hear that man I had a 60 gallon devilbiss compressor that was quiter than this thing. I use to do work at my house with it pretty quiet so I get it.
Very good video brother, thank you. I notice no water filter in-line at the gun. Is that not a problem with the pancake compressors? Thank you, hope you didn’t freeze today like I did.
@thetriggerman954 Thanks brother! It's the same for us in Atlanta. I was referring to the standox paint system. They have the 1oz, 4oz and 8oz toners and pearls.
@@GAinfVet ohhh you're going all out. I used to do it on the side so I would just get paint mixed up or mix up some at my shop then do it but if that's going to be your main thing it's best to do it the way you are then also if you have a color issue you have the toners there to tint it.
Love the video and your content is appreciated currently do mobile work and lph 80 is my go to exept for when its windy then i have to use r 500 with a bigger fan to cover
Thank you brother Glad you're enjoying the content, and yes I can definitely see for a bigger break on on a windy day I'm sure it doesn't lay down as smooth as the LPH 80 but it gets the job done. At least you know what it takes and how to adapt to your surroundings 💪🏼💰
Great video as always Trigga!! just goes to show that you don't need a big one to get the job done😁if you make sure you match your gun to the CFM output then it will work up to a point as you know a 2.2CFM compressor isn't able to put out a constant 2.2CFM I can't remember what the exact conversion for this is🤷♂it's my age you know🙄😂 That little compressor did a great job with your mini gun Trigger, it came out looking mint and that little dry spot is an easy fix for you👌👍John UK
Love your vids triggerman much love from sydney australia, great information thanks again, now curious about spraying clear ceramic on new aluminium rims, the paint manufacturer recommends iwata 80 with a .8 nozzle, any info that you can help me with would be awesome
I have never sprayed the stuff but .08 sounds like a fine enough tip to get it to lay on smooth. Just follow the manufactures recommendation and you should be good. Keep me posted I'm curious on that one myself.
I'm tellin you man, that electric spray gun I sent you the pic of DOESN'T EVEN NEED a compressor, just an outlet and you're all set! "Just plug in the gun and have fun". (You can use that line if you want) I'm gonna buy that thing and ship it to you. 😉 But we're gonna need a FULL review on it, tho. ☝☝ 😆😆😂😂🤣🤣 In all seriousness, I have one of those LPH-80's in 1.2, and I one hundred percent agree with you. Great little touch up gun that can "punch outside it's weight class" when needed. Another Iwata home run. Really nice little gun. 😉👍 (Ol'Busted needs to clean his tho) ☝
🤣🤣 when he passes on over there under a car, those are the first tools of his I'm going to grab 😈 lol bEacHcItY in the house that up my man. Man I ain't using no damn electric spray gun 😭 that type of stuff already belong to a famous RUclipsr not the Trigga 😉😎
Great job Trigger👍. How much HP is that compressor and would a normal size gun affect the finish. I'm looking to get a 50L 3.5 Hp and was wondering if I had to get a mini gun or is my normal size good.
It doesn't have a HP on it. Must be that weak 😂 and yes a regular size spray gun would change the results. It's all about the CFM this is the lowest CFM gun across the board. You would have to find a full size that has a very low CFM. A lot of those guns say LVLP but are lying so be careful. Hey something reputable
I am just a hobbyist, so I just snagged a deal on a gently used LPH-80 to supplement my turbine sprayer. The turbine does great on laying down thicker coats like the high-build primer, but I was getting too much orange peel / tiger stripes with metallic. I am familiar with Iwata for their airbrushes, which I love, so this looks like this will be great for my tiny compressor for smaller projects or panels. Question: What are the benefits / trade-offs of different nozzle sizes? A 0.8 should atomize finer, but would require the correct viscosity and you likely have less coverage? I know certain materials call for certain nozzle sizes, but do you ever adjust your size up/down? For example, could you spray base/clear with a 0.6, if properly reduced? Appreciate your videos, they have been a big help in learning!
The 0.8 will itemize finer I mean it's okay if you're doing a little tiny things but I personally don't like to use anything smaller than a 1.0. But like I said if you're painting very small things it's fine. I will give you a very glassy finish
@@thetriggerman954 That was fast! Right on - so a balance between fine atomization and amount of material you are putting out. So smaller = finer finish, but slower? The LPH-80 has the 1.2 in it, so I think I should be good to go. The base/clear I have used called for 1.3-1.5; but I've also used one of those tiny Harbor Freight 0.6 detail guns and it sprayed out as well, so wasn't sure about the difference.
@@thetriggerman954 Well... slow in comparison with full size guns 😜 I should have put "slow" in quote becouse it's more than enough for my projects 😂 And it saves A LOT of material, great transfer efficiency. I did a glass finish on little gas tank with 70 mil of clear... 💰 in the pocket.
I know you're only in the spray booth but can you show us by telling us the example of what the primer was sanded in with the rest of the panel was prepped out in like can you still guide us through the overall process even though it's already done for you by your Preppers that way I can understand and it's not just spraying reviews I get so much out of you but I can receive much more cuz I know you can still explain the process of what the Preppers did for you you feel me thank you I'm a fan you know that I watch every episode
Ok I'll try to remember to add that in. I have told you quite a few times. Primer area 400 grit. Blend area 800 grit. That never changes. Every vehicle I paint. Primary area is sanded with 400 blend areas are sanded with 800 that will never change. It doesn't matter what color doesn't matter what size the job there's never a difference. But I'll try to remember to say it and every single video for you. 💪🏼
I would advise not to paint an entire car with a mini gun. But it is possible if you're trying to do it just to say you can do it. Probably better than I'm using a spray can lol
@@thetriggerman954 are all cups the same thread? Ive never owned a gun so I dont know the difference. Ive seen disposable cups on Amazon and they all look the same.
I would not advise to use any mini gun to paint an entire car. I mean I'm sure it could be done but it's not anything I would suggest. The smallest gun I'd ever consider spraying an entire car with is the iwata LPH 300. I just uploaded a video Friday using that gun. You did go check it the video it's a great versatile gun and only uses like 7cfm and lays glassy.
@@thetriggerman954 im on it...🫡 salute triggerman that low cfm is what i was looking for...respectfully these rs500 and other lvlp guns dont shoot fast ...i like the way u paint faster and i never see u get runs...im still learning
@@suspensefulness more than welcome. The lph300 might now be as fast as the other LVLP guns but it atomizes better and any other LVLP gun hands down. So it's a balance you kinda have to work with, you're limited on air so it's the best option for the best results.
Since it's small it's not trapping water like a big compressor right, specially if it never stop running. Water gets trapped when ever there's air reserved on the tank if I'm not mistaken.. I mean I could be wrong but that's just my thoughts... Either way doesn't hurt to put on a water separator, but there's a chance it may lost more compression. I don't know I may sound dumb but that's what's coming through my mind without smoking a joint..😂
😂😂😂😂 hey man lucky for the guys watching I can do this. If I were to ever leave this shop and go somewhere else I wouldn't be able to have the fun and experiment with things the way I do. 😜
Hey, Trigger. You know how your alter ego, Trigger Troll always harping about ppe?? Welp, I cracked down on myself. Breathable lab coat with hood. Heavy duty gloves. Full face respirator...with stick on lens shields from Amazon. Only way i can keep em good! Helps a lot. 30 pack. So yeah, became my own troll, but I wanna stick around as long as possible!
Yep that's my set up. Lab coat, full face mask, I also use the replaceable covers. And gloves I'm still trying to get use to 😅 yeah Bear the Trigger Troll be on my ass but I know it's for my own good. 🫠
Kid comes in does paint for us & loads of others. He barely glances at the compressor, doesn't do great cleaning his gun, it's a mess usually, Doesn't have an on-gun gauge, mixes clear in with base, does all them things you're not meant to do. Gun he uses is generally an absolute pos cheap unit, he's always covered in paint from head to toe. Every damn thing he paints looks factory - baffles me because he ain't doing anything how the "experts" say you ought. He takes a blowtorch to panels after clear to get shut of issues ffs.. a damn blowtorch. Leaves them flawless. I'm betting it's all about talent more so than equipment - certainly is in his case. Kids talented. Much like Mr Triggerman. Hand them a turd, you're still getting a diamond. Defies explanation. Kid doesn't wear a damn mask either, not ever. That bit bothers me, but he just shrugs.
Rockin job btw Trig. Supermint. Very impressed. You got Talent. Guy I know runs a tiny-azz airbrush set-up - compressor is mini, gun is super mini - holds about a teaspoon of paint. He does very nicely thank you doing touch-ups for people with them 2 tiny tools. It's the fight in the dog, not the dog in the fight that matters. I run the tiniest welders doing the biggest jobs on vehicles - my tiny welders do stuff the guys with all the gear pass on. My shidt runs off 13 amps - but I can run them gud. Everyone says that's not possible either. Oh yes it it.
I know exactly the type you're talking about one of the guys I learned a lot from his name was Ricky he's from Spain. He came to work at his shop I was at He came in with a milk crate and old dirty spray guns I mean extremely filthy me and the prepper or like this dude doesn't know what the hell he's doing turns out he was one of the best painters I've ever met in my life and he taught me a lot, his style of working was horrible smoked cigarettes and drink Rockstar energy drinks while painting the car but he was one bad ass painter. A lot of this Hollywood /internet social media stuff is cool but there's really some people out there that are not working in those environments and are doing just as good of a job if not better. So imagine you take guys like that and then not so great environment and put them inside of the state of the art spray booths and you'd be amazed at what they can do.
@@thetriggerman954 No booth here & no booth at where he works - this guy paints trucks with no booth - I mean semi's, not F150's - people would lose their sh1t at the state of where he paints - stuff rolls out looking like Mr Rolls Royce done the job. It ain't the gear, it's the skill. He'll spend 10 minutes spraying thinners out of his gun afterwards - cups caked in old paint - that nozzle is clear as a whistle - he knows what bits matter & what bits don't.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
"That's no compressor. You might as well blow your mouth through the hose." You a fool for that one Trigz. 🤦♂️😂 Another banger tho. 👍
😅😅 Trigga Troll got me on that one 😜 thanks my man ✊🏼
I’m a big fan of your channel, and I really enjoy the content you put out. The cars that I mainly paint are 60’s and early 70’s muscle cars, but I really appreciate the kind of work you do. Brothers like you are the ones that keep our industry alive. Thank Trigger Man!
Thank you Killer_Bee if you come across a 70ish Olds Cutlass you want to get rid of think of Ole Trigger 💭💭 😎💪🏼
Thank you again brother I appreciate you watching
No doubt Bro , I’ll definitely let you know something when I find one. Keep them videos coming, can’t wait for the next one.
@@KILLER_BEE_98 will do. Thanks KB ❤️
Triggerman..I would not have believed that if I didn't see it..have to believe it..cos I'm looking right at it..and wow!!..nice outcome from such a small compressor...watch out Underground Paint King!!!..Triggy comin for ya!!..😂😂😂..nice info Triggerman and as usual keep doing your thing man..God bless.
They you Eric, yea man I wasn't sure what was going to happen there 😂🤞🏼 but it worked out smooth thanks for tuning in 💪🏼
Bless up
I did mobile work with that gun for years. Its perfect for bumpers too. You can dial it in on the fly for fog light recesses and open it up with a pretty wide fan.
I agree, perfect little gun is held up great for me for the last 15 years. Well worth the investment. Thank you for watching. 💪🏼
First off best video quality out of all these paint channels! 4k hittin, second I was curious about the mobile equipment needed as well thanks for making this video trigga 🎉
You're more than welcome James. Glad you can appreciate the effort and quality of the videos every day I try to get better and better to make it a smoother and more enjoyable experience for you guys. Good to hear that it's being noticed. Thank you again James 🫡
@@thetriggerman954 your welcome brother , every video I put it on highest settings cause I’m blind and like quality but you be surprised even the biggest channels be running low quality smh but I know the trigga fam see and appreciates your effort!
Trigger man I have an old sata 3000b mini jet have .8 and 1.2 set for it never used the .8 but 1 time the 1.2 gets good results 1 like 1.4 in full size gun like a little paint with my air i'm 76 y.o. been painting for 60 years still learn something every day.
I have that same 3000 mini, great gun. Haven't used that sucker in years. Might bring it out since you brought it up 😎😂
Those ridgid compressors are beast I run 2 roof nailers off the joint and runs all day long! Good shit showing people these things are possible. Best small compressor for the money is the husky 30 gallon 2 stage oiled for running mobile. Good video
Thank you Sir man I have had that dam compressor so long and it's still going 😂 tough little sucker
Looks like you can get the job done with a small tool ... good to know ... another great video ...
Yes sir, thank you Joe 💪🏼
😮Wow, really nice job that gun did with that little compressor. I've been wanting to re-spray the hood and trunk lid on my car , but was not sure if it would be strong enough to work.
Well hopefully this gives you an idea of the capability of your compressor 🫡😎
I like the videos you make. Using products just to show it can be done. Keep 'em coming Trigger Man.
Thank you Byron I appreciate that my man 💪🏼😎
I use a spray gun similar to this gun for doing ghost patterns . I use a small compressor with an auxiliary tank. I don't like to hear noise, so my naibors don't complain about the noise.
Lol , I hear that man I had a 60 gallon devilbiss compressor that was quiter than this thing. I use to do work at my house with it pretty quiet so I get it.
Very good video brother, thank you. I notice no water filter in-line at the gun. Is that not a problem with the pancake compressors? Thank you, hope you didn’t freeze today like I did.
Another great video Triggerman 💯💪🏾
Thank you for watching champ 🏆
Amazing result!
Thank you Jean 😎💪🏼
Thanks brother on the info! ❤
You're more than welcome Greg 😎💪🏼
Once again, you show the paint community how it's done!
Just trying to play my part 💪🏼🫡🍻
I have the lph 80 102g and 124g getting ready to start this mobile journey after I purchase this 8oz paint system
Nice Kendrick, wish you the best on your journey. We have to use 3oz or less outside here in my area.
@thetriggerman954 Thanks brother! It's the same for us in Atlanta. I was referring to the standox paint system. They have the 1oz, 4oz and 8oz toners and pearls.
@@GAinfVet ohhh you're going all out. I used to do it on the side so I would just get paint mixed up or mix up some at my shop then do it but if that's going to be your main thing it's best to do it the way you are then also if you have a color issue you have the toners there to tint it.
Love the video and your content is appreciated currently do mobile work and lph 80 is my go to exept for when its windy then i have to use r 500 with a bigger fan to cover
Thank you brother Glad you're enjoying the content, and yes I can definitely see for a bigger break on on a windy day I'm sure it doesn't lay down as smooth as the LPH 80 but it gets the job done. At least you know what it takes and how to adapt to your surroundings 💪🏼💰
Yes sir
Great video as always Trigga!! just goes to show that you don't need a big one to get the job done😁if you make sure you match your gun to the CFM output then it will work up to a point as you know a 2.2CFM compressor isn't able to put out a constant 2.2CFM I can't remember what the exact conversion for this is🤷♂it's my age you know🙄😂
That little compressor did a great job with your mini gun Trigger, it came out looking mint and that little dry spot is an easy fix for you👌👍John UK
Thank you John 😊 and no you don't need a big one to get the job done 😜😂
🤭😏🤨😂👍
Love your vids triggerman much love from sydney australia, great information thanks again, now curious about spraying clear ceramic on new aluminium rims, the paint manufacturer recommends iwata 80 with a .8 nozzle, any info that you can help me with would be awesome
I have never sprayed the stuff but .08 sounds like a fine enough tip to get it to lay on smooth. Just follow the manufactures recommendation and you should be good. Keep me posted I'm curious on that one myself.
@@thetriggerman954 also what is the attachment you use that fits the iwata for the quick disposable cups
Hey whats up my friend. You the master bro. You know one love from u friend from aruba in the caribbean
Thank you Edgar I appreciate you my man 🙏🏼♥️
I'm tellin you man, that electric spray gun I sent you the pic of DOESN'T EVEN NEED a compressor, just an outlet and you're all set! "Just plug in the gun and have fun". (You can use that line if you want) I'm gonna buy that thing and ship it to you. 😉 But we're gonna need a FULL review on it, tho. ☝☝ 😆😆😂😂🤣🤣
In all seriousness, I have one of those LPH-80's in 1.2, and I one hundred percent agree with you. Great little touch up gun that can "punch outside it's weight class" when needed. Another Iwata home run. Really nice little gun. 😉👍 (Ol'Busted needs to clean his tho) ☝
🤣🤣 when he passes on over there under a car, those are the first tools of his I'm going to grab 😈 lol
bEacHcItY in the house that up my man. Man I ain't using no damn electric spray gun 😭 that type of stuff already belong to a famous RUclipsr not the Trigga 😉😎
I feel you Triggerman, I'm using a 13 gal, 3.5 HP puts out 8.6 scfm @ 40 psi
And you're still making it happen. 🤜🏼🤛🏼 No excuses just results 😎
Triggerman laying good paint
Good video bro
Thank you Reynaldo 💪🏼🫡
Great Job, Love your videos. I have the LPH 80 also, I need a cup for it. What is the cup you are using in the video?
Thanks man. I'm using the Devilbiss Dekups disposable cup system
Hey triggerman.you’ve convinced me on a gun.What adapter do you use for that larger cup
Devilbiss Dekups adapter
great video man 💪🏽..i been using a pancake compressor to paint hoods and part’s gets the job done
Thank you Rick, dang you're doing hoods with it 😯 Awesome. Small but nighty. 💪🏼
Great job Trigger👍. How much HP is that compressor and would a normal size gun affect the finish. I'm looking to get a 50L 3.5 Hp and was wondering if I had to get a mini gun or is my normal size good.
It doesn't have a HP on it. Must be that weak 😂 and yes a regular size spray gun would change the results. It's all about the CFM this is the lowest CFM gun across the board. You would have to find a full size that has a very low CFM. A lot of those guns say LVLP but are lying so be careful. Hey something reputable
I am just a hobbyist, so I just snagged a deal on a gently used LPH-80 to supplement my turbine sprayer. The turbine does great on laying down thicker coats like the high-build primer, but I was getting too much orange peel / tiger stripes with metallic. I am familiar with Iwata for their airbrushes, which I love, so this looks like this will be great for my tiny compressor for smaller projects or panels.
Question: What are the benefits / trade-offs of different nozzle sizes? A 0.8 should atomize finer, but would require the correct viscosity and you likely have less coverage? I know certain materials call for certain nozzle sizes, but do you ever adjust your size up/down? For example, could you spray base/clear with a 0.6, if properly reduced? Appreciate your videos, they have been a big help in learning!
The 0.8 will itemize finer I mean it's okay if you're doing a little tiny things but I personally don't like to use anything smaller than a 1.0. But like I said if you're painting very small things it's fine. I will give you a very glassy finish
@@thetriggerman954 That was fast! Right on - so a balance between fine atomization and amount of material you are putting out. So smaller = finer finish, but slower? The LPH-80 has the 1.2 in it, so I think I should be good to go. The base/clear I have used called for 1.3-1.5; but I've also used one of those tiny Harbor Freight 0.6 detail guns and it sprayed out as well, so wasn't sure about the difference.
@@AlCapwndYou yeah my LPH 80 has a 1.2 great little gun. 💪🏼👊🏼
That's what I use to paint motorcycles 😉 Own two 1.2 and 0.8. A true little monster... It's slow but im not in a hurry with custom
Can't have it all durable, low CFM, great finish and speed 🤷🏽♂️🤣 at least it checks off most of the boxes. 💪🏼
@@thetriggerman954 Well... slow in comparison with full size guns 😜 I should have put "slow" in quote becouse it's more than enough for my projects 😂 And it saves A LOT of material, great transfer efficiency. I did a glass finish on little gas tank with 70 mil of clear... 💰 in the pocket.
@@Pavelek88 🤑💸💵💰
I appreciate the content brother man
You got it my man. And thank you for watching 💪🏼❤️
CFM stats are impressive!
Lotta Bang for a little Thang 😄
Thanks for this video😉
Was looking to get this gun recently-perfect timing🔫👍🙌🤙
Good to hear. Right on time 😎💪🏼
Again, trigger man. Looking clean
Thank you Sir 💪🏼
dang that came out beautiful
Thank you sir. Not bad for a micro compressor aye 😎💪🏼🤙🏼
I know you're only in the spray booth but can you show us by telling us the example of what the primer was sanded in with the rest of the panel was prepped out in like can you still guide us through the overall process even though it's already done for you by your Preppers that way I can understand and it's not just spraying reviews I get so much out of you but I can receive much more cuz I know you can still explain the process of what the Preppers did for you you feel me thank you I'm a fan you know that I watch every episode
Ok I'll try to remember to add that in. I have told you quite a few times. Primer area 400 grit. Blend area 800 grit. That never changes. Every vehicle I paint. Primary area is sanded with 400 blend areas are sanded with 800 that will never change. It doesn't matter what color doesn't matter what size the job there's never a difference. But I'll try to remember to say it and every single video for you. 💪🏼
Excellent mate....
Thank you! Cheers! 🍻
What’s up triggerman! I’m wondering is it possible to paint a whole entire car with the lph80?
I would advise not to paint an entire car with a mini gun. But it is possible if you're trying to do it just to say you can do it. Probably better than I'm using a spray can lol
What tip being used for primer, base and clear on this set up?
@@TheIrvingsylva 1.3 and 1.2 for clear
@ thanks!!🙏
They make an lph-440 as Well... used as my sealer gun
You're right I forgot they made that gun for primer and sealer. I never used it but you're right they do have the 440. 👊🏼
The gun in the link doesn't come with a cup. What cup and adapter are you using?
It's a Dekup adapter. You might have to get the cup separately
@@thetriggerman954 are all cups the same thread? Ive never owned a gun so I dont know the difference.
Ive seen disposable cups on Amazon and they all look the same.
Just used a r160q 1.3 ..gives that lph80 a run for its money..try one 1 day
That one is 4.2cfm and there are full size spray guns that like 4.5 CFM 🤔 Iwata still got it beat lol but that might still be good comparison video
It beats spraying a car with rattle cans😂 Nice work bro🤙
Yea man, I'm not going to jump on the rattle can wave 😂 at least I don't plan on it 🤔
@thetriggerman954 Ain't nobody got time for that😁
triggerman can i use this gun with my 33 gallon to paint my mustang and clear...
I would not advise to use any mini gun to paint an entire car. I mean I'm sure it could be done but it's not anything I would suggest. The smallest gun I'd ever consider spraying an entire car with is the iwata LPH 300. I just uploaded a video Friday using that gun. You did go check it the video it's a great versatile gun and only uses like 7cfm and lays glassy.
@@thetriggerman954 im on it...🫡 salute triggerman that low cfm is what i was looking for...respectfully these rs500 and other lvlp guns dont shoot fast ...i like the way u paint faster and i never see u get runs...im still learning
@@suspensefulness more than welcome. The lph300 might now be as fast as the other LVLP guns but it atomizes better and any other LVLP gun hands down. So it's a balance you kinda have to work with, you're limited on air so it's the best option for the best results.
@@thetriggerman954 🫡 GET THEM LIKES AND SUBS UP...TRIGGERMAN🔥🔥
Is that Rigid compressor really loud?
I think it's pretty loud. That's probably the only downside.
Did you use water separator (dryer)?
Nope, compressor straight to the gun. Probably a good idea to use one but I didn't.
Since it's small it's not trapping water like a big compressor right, specially if it never stop running. Water gets trapped when ever there's air reserved on the tank if I'm not mistaken.. I mean I could be wrong but that's just my thoughts... Either way doesn't hurt to put on a water separator, but there's a chance it may lost more compression. I don't know I may sound dumb but that's what's coming through my mind without smoking a joint..😂
@@josegalindo1262 sounds good to me Smokey 😂
I think it’s hilarious how you experiment on the car dealers cars,Hahahahahaha
😂😂😂😂 hey man lucky for the guys watching I can do this. If I were to ever leave this shop and go somewhere else I wouldn't be able to have the fun and experiment with things the way I do. 😜
U pulled a rabbit out a hat with this one..❤❤darnitt u good
Thanks Jo, I honestly didn't know what to expect on this one brother 😂😭😲 The paint angels were on my shoulders 😇🪽🪽🪽🪽
Hey, Trigger. You know how your alter ego, Trigger Troll always harping about ppe?? Welp, I cracked down on myself. Breathable lab coat with hood. Heavy duty gloves. Full face respirator...with stick on lens shields from Amazon. Only way i can keep em good! Helps a lot. 30 pack. So yeah, became my own troll, but I wanna stick around as long as possible!
Yep that's my set up. Lab coat, full face mask, I also use the replaceable covers. And gloves I'm still trying to get use to 😅 yeah Bear the Trigger Troll be on my ass but I know it's for my own good. 🫠
@@thetriggerman954 Damn right!
👍
All i use in mini guns is ani very good guns!👍🏻
Cool 😎
👍🏻
💪🏼😎
Kid comes in does paint for us & loads of others. He barely glances at the compressor, doesn't do great cleaning his gun, it's a mess usually, Doesn't have an on-gun gauge, mixes clear in with base, does all them things you're not meant to do. Gun he uses is generally an absolute pos cheap unit, he's always covered in paint from head to toe.
Every damn thing he paints looks factory - baffles me because he ain't doing anything how the "experts" say you ought. He takes a blowtorch to panels after clear to get shut of issues ffs.. a damn blowtorch. Leaves them flawless.
I'm betting it's all about talent more so than equipment - certainly is in his case. Kids talented. Much like Mr Triggerman. Hand them a turd, you're still getting a diamond. Defies explanation. Kid doesn't wear a damn mask either, not ever. That bit bothers me, but he just shrugs.
Rockin job btw Trig. Supermint. Very impressed. You got Talent. Guy I know runs a tiny-azz airbrush set-up - compressor is mini, gun is super mini - holds about a teaspoon of paint. He does very nicely thank you doing touch-ups for people with them 2 tiny tools.
It's the fight in the dog, not the dog in the fight that matters. I run the tiniest welders doing the biggest jobs on vehicles - my tiny welders do stuff the guys with all the gear pass on. My shidt runs off 13 amps - but I can run them gud. Everyone says that's not possible either. Oh yes it it.
I know exactly the type you're talking about one of the guys I learned a lot from his name was Ricky he's from Spain. He came to work at his shop I was at He came in with a milk crate and old dirty spray guns I mean extremely filthy me and the prepper or like this dude doesn't know what the hell he's doing turns out he was one of the best painters I've ever met in my life and he taught me a lot, his style of working was horrible smoked cigarettes and drink Rockstar energy drinks while painting the car but he was one bad ass painter. A lot of this Hollywood /internet social media stuff is cool but there's really some people out there that are not working in those environments and are doing just as good of a job if not better. So imagine you take guys like that and then not so great environment and put them inside of the state of the art spray booths and you'd be amazed at what they can do.
@@thetriggerman954 No booth here & no booth at where he works - this guy paints trucks with no booth - I mean semi's, not F150's - people would lose their sh1t at the state of where he paints - stuff rolls out looking like Mr Rolls Royce done the job. It ain't the gear, it's the skill. He'll spend 10 minutes spraying thinners out of his gun afterwards - cups caked in old paint - that nozzle is clear as a whistle - he knows what bits matter & what bits don't.
Had to work 12 hours today so I was really slow at this time. Why did your body guy stop painting? I’d much rather be a painter than a body guy.
I think he just got to old and the youngsters were beating him to the punch lol, big old raggedy van too.
@@thetriggerman954 ooooh that old old guy in your videos sometimes?
1st.......😐
First of the second day 🤷🏽♂️😂
@thetriggerman954 😄
Another great video! Your channel is gonna take off, triggerman is the real deal🫵
Thank you sir 🙏🏼 I hope it takes off soon lol I feel like a plane on the runway with a blind pilot 😂
Thanks man I appreciate you!