Brill project from start to finish such detail and quite time consuming I bet and well worth the effort to produce a very nice project thanks for sharing 👍
Absolutely stunning, I'm so happy someone has done this project, as I told my husband that I wanted to try this, which I thought of but being a beginner, I knew what I wanted and was trying to figure the process. And wow here's someone who has done it . Thank you. You've my life easier. I'm doing colorfull mandalas, and a dragon with copper color inlay I also have tree of life, but not as nice as yours. All above are ready for the carbon process. Thank you so much. From Canada .Your tutorials are so inspiring. .I will subscribe.
Firstly sheila thank you for the sub,carbon and trace is my favourite way to transfer a image to the wood,even on some of my scroll saw projects,the bits I use fit a dremel ,they have a ,3.175mm size shaft,you can buy a router attachment to fit a dremel,ideal for the smaller projects, good luck with your tree of life..
Hi Shane. New sub having stumbled upon your channel. Some great router and scrollsaw work on your channel. :) Helpful hint (i learned from my own trials and errors with resin)...... Rather than pouring B into A...If you pour the thicker part A resin into the the thinner part B hardener (ideally right into the middle of the cup of hardener), you are much less likely to get unmixed resin stuck to the sides of the cup as it's the thinner part B sitting at the edges rather than the thicker stickier part A. (Especially as you're not decanting into a 3rd cup). I'm not being a RUclips armchair expert or keyboard warrior, I just though I'd mention it in case it helps / reduces the chance of any little bits of mix that don't cure properly. Thanks again Shane. Your work has given me inspiration. :)
Thank you for the sub,I suppose we all have our ways of doing things, I did away with the third cup a while back,just don't see the point in wasting a cup,I found that B pours alot easier then A..I had one mix that set as I was mixing it,I've no idea why,but very strange, only happened the once..🤣🤣
Absolutely beautiful finished product showing attention to detail. I'm amazed that that when filling even the smallest routed areas the resin remained in those areas and did not spill over onto the higher level wood surface. Question, had you had a spill over outside the routed area would the crystal clear finish you applied earlier enable you to just wipe it clean?
Thank you Alan,because the routed out branches are so thin its harder for the resin to flow,that's why I use a cocktail stick to help it on its way,if you get resin on the wood you can just wipe it off with a tissue ,it makes no difference if the wood is sprayed or not,it wipes of bear untreated wood just as easy...
Thank you Joe..the cnc bits come in different degrees 20 or 30 degree have been popular ones for me.. cnc bits ...www.ebay.co.uk/itm/172213663526 6.35mm adapter collet www.ebay.co.uk/itm/401983954749...ebay or Amazon......
I really like this, where did you get the pattern? I like the fact that you and I tend to use the same tools, I'm not as good as you with the spirel blade.
Thank you mark I Googled tree of life template, I added the circle and some extra lines..i love the spirals now,after the first hour they nearly went in the bin 😂
Thanks Peter, if you search tree of life in a circle silhouettes online there's plenty to go at, I've tried looking for this one again but can't find it ,but it's there 😁👍
Does the resin still bond to the piece well with the linseed oil and clear-coat underneath it? Seems like a great way to get a sealant coat underneath it to prevent bubbles and color bleeding into the grain, but does it bond as well as to bare wood?
Thank you ,yes the resin bonds solid with no issues ,the varnish definitely helps to seal the wood at the same time,I did a sample and varnished afterwards and it made the resin go dull,definitely coat before resin goes in..
Hey mate, those little bottles of paint in the bag, could you please post a link as to where to buy them in the description, so I can buy some please, Thanks 😁😁
Hi Warren, I get mine from Ebay, heres some to get you started,search through them ,they vary in price, you can get powders, inks,dyes,so it's a personal choice,I've also used acrylic paints in resin before, what ever you decide you only need a couple if drops in each mix..👍www.ebay.co.uk/itm/174620209480
After finding your channel, you've inspired me to go out and buy the tools to learn to do things like this. Do you design your own patterns too or is there a good resource you can recommend?
Thank you I get most of my template from Google, just add template or silhouettes or stencil after what ever you are looking for,so for this one I searched tree of life template, two sites I've used before are pixabay or vecteezy.. copyrights free
Wow, you did a fantastic job. I’m frantically watching resin tutorials before I try my first. Thanks for taking the time to video this
Thank you Robin,I love using resin in some projects 😁👍
I have fought the spray adhesive and paper on the wood. The blue tape was great.
Nice one,I've found the blue tape works great...👍
Fantastic. Thanks for sharing.
Thank you 😊
I really like your style and always look forward to your video's. I am learning a lot from watching. them. Thank you. This is a fab project :-)
Thank you Anita I appreciate the comment ,my videos are nothing fancy,just sharing What little I know 😂👍
that's beautiful tree of life thanx for video
Thank you ,I'm happy with this one..👍
Really nice work Shane !!
Cheers David, I'm happy with this one..👍
Thank you. Love tree of life projects.
Thank you I appreciate your comment 😁
Beautiful project!
Thank you..
Wow a really awesome project. It looks great.
Thank you Jeff, I'm happy with the end project 👍
Brill project from start to finish such detail and quite time consuming I bet and well worth the effort to produce a very nice project thanks for sharing 👍
Thank you phillip, I'll take the easy ones and not so easy..😂
Lovely project excellent finish love these videos great detail and information
Thank you Martin I appreciate the comment 👍
Absolutely stunning, I'm so happy someone has done this project, as I told my husband that I wanted to try this, which I thought of but being
a beginner, I knew what I wanted and was trying to figure the process. And wow here's someone who has
done it . Thank you. You've my life
easier. I'm doing colorfull mandalas, and a dragon with copper color inlay
I also have tree of life, but not as nice as yours. All above are ready for the carbon process. Thank you so much. From Canada .Your tutorials are so inspiring. .I will subscribe.
I dont have a router, only my Dremel Micro.
Firstly sheila thank you for the sub,carbon and trace is my favourite way to transfer a image to the wood,even on some of my scroll saw projects,the bits I use fit a dremel ,they have a ,3.175mm size shaft,you can buy a router attachment to fit a dremel,ideal for the smaller projects, good luck with your tree of life..
@@fishtank5050 thank you so much
How or where do you get your designs and fonts from please
Really nice, I like how it turned out.
Thank you,I'm happy with this one 👍
fishtank5050 how or where do you get your designs and fonts from?
Nice ohe Shane. The old dresser wood I've used as well for projects. GReat stuff. Love your videos - thanks again
Cheers bill,I love recycled wood, its surprising what you can get from a pine double wardrobe lol
Really beautiful ❤️😍
Thank you ,I appreciate your comment..
Wow it turned out great 👍 good job 👏🏼 love it
Thank you,I appreciate the comment...
Hello Shane! Awesome job! How do I go about getting that pattern? Thanks, Vinnie
@@Kerf-bk2rl. I've pm you..I added the circle and some extra lines ..
Love love love this. I'm a fan just beautiful...
Thank you ,I appreciate your comment 😁👍
wonderful project and music,thank you.
Thank you Fred,I appreciate your comment..
Beautiful work. I love it!
Thank you I appreciate your comment 😁👍
Brilliant job, So I now have the resin & some dyes so looking forward to trying something like this, cheers Shane for another great video..
Thank you..using resin definitely gives you more options ,good luck with your projects 👍
Another great video keep up the good work pal
Cheers,I'll take the easy ones with the not so easy..lol
Gorgeous! Thanks for all the helpful tips, too!
Thank you I appreciate your comment..
Wow! Absolutely beautiful ❤️. This is exactly what I wanted to do. I knew that it could be done. Thank you so much for making it happen!
Thank you Mary, I'm happy that you like this piece,I'm really pleased the way it turned out..
Awesome project. You can also use a surgical syringe which could hold more resin. Keep up the great work !!!!!
Thanks Robert I appreciate your comment 👍
great video--I learned a lot
Thank you ,I appreciate the comment
Hi Shane. New sub having stumbled upon your channel. Some great router and scrollsaw work on your channel. :)
Helpful hint (i learned from my own trials and errors with resin)...... Rather than pouring B into A...If you pour the thicker part A resin into the the thinner part B hardener (ideally right into the middle of the cup of hardener), you are much less likely to get unmixed resin stuck to the sides of the cup as it's the thinner part B sitting at the edges rather than the thicker stickier part A. (Especially as you're not decanting into a 3rd cup).
I'm not being a RUclips armchair expert or keyboard warrior, I just though I'd mention it in case it helps / reduces the chance of any little bits of mix that don't cure properly.
Thanks again Shane. Your work has given me inspiration. :)
Thank you for the sub,I suppose we all have our ways of doing things, I did away with the third cup a while back,just don't see the point in wasting a cup,I found that B pours alot easier then A..I had one mix that set as I was mixing it,I've no idea why,but very strange, only happened the once..🤣🤣
Awesome work super impressive I've got a desk that I'm about to do with a similar thing. Hopefully mine turns out just as nice as yours
Excellent idea Jacob ,hope it all goes well..😁👍
Wow I have just found your channel and love what you do!
Thank you I appreciate your comment, I like to go from router, to scroll saw to carving or resin,it keeps it interesting for me 😂😂👍
nice project
Cheers Wayne, I'm happy with this one...
AWESOME
Thank you 😊
Absolutely beautiful finished product showing attention to detail. I'm amazed that that when filling even the smallest routed areas the resin remained in those areas and did not spill over onto the higher level wood surface. Question, had you had a spill over outside the routed area would the crystal clear finish you applied earlier enable you to just wipe it clean?
Thank you Alan,because the routed out branches are so thin its harder for the resin to flow,that's why I use a cocktail stick to help it on its way,if you get resin on the wood you can just wipe it off with a tissue ,it makes no difference if the wood is sprayed or not,it wipes of bear untreated wood just as easy...
Belíssimo trabalho meus parabéns nota 10 👍👍👍
Thank you..
Absolutely beautiful can I ask about the pattern
Thank you , search tree of life silhouettes online 😉👍
love your channel Sir could you please give a link for the CNC bits you use plus the collet reducer please
Thank you Joe..the cnc bits come in different degrees 20 or 30 degree have been popular ones for me..
cnc bits
...www.ebay.co.uk/itm/172213663526
6.35mm adapter collet www.ebay.co.uk/itm/401983954749...ebay or Amazon......
I really like this, where did you get the pattern? I like the fact that you and I tend to use the same tools, I'm not as good as you with the spirel blade.
Thank you mark I Googled tree of life template, I added the circle and some extra lines..i love the spirals now,after the first hour they nearly went in the bin 😂
Beautiful! Where did you get that graphic of the tree of life? Can I find it online somewhere? Thanks for sharing.
Thanks Peter, if you search tree of life in a circle silhouettes online there's plenty to go at, I've tried looking for this one again but can't find it ,but it's there 😁👍
@@fishtank5050 Thanks, am going to try this with my CNC router! Nice craftsmanship.
fishtank is a deity.
This one takes me back.🤣👍
Hello Shane! AWESOME JOB!! How can I get a hold of that pattern? Thanks, Vinnie
Vinnie Ciccone in a previous comment he said Google tree of life
Does the resin still bond to the piece well with the linseed oil and clear-coat underneath it? Seems like a great way to get a sealant coat underneath it to prevent bubbles and color bleeding into the grain, but does it bond as well as to bare wood?
Thank you ,yes the resin bonds solid with no issues ,the varnish definitely helps to seal the wood at the same time,I did a sample and varnished afterwards and it made the resin go dull,definitely coat before resin goes in..
Hi there, where can I find those beautiful tree
If it's the patten you are looking for search tree of life silhouettes online,plenty to go at 😉👍
Hey mate, those little bottles of paint in the bag, could you please post a link as to where to buy them in the description, so I can buy some please, Thanks 😁😁
Hi Warren, I get mine from Ebay, heres some to get you started,search through them ,they vary in price, you can get powders, inks,dyes,so it's a personal choice,I've also used acrylic paints in resin before, what ever you decide you only need a couple if drops in each mix..👍www.ebay.co.uk/itm/174620209480
Its alot cheaper to buy all 13 bottles .😁👍
@@fishtank5050 Thanks buddy, hard to buy here in Australia, will will search them out
Beautiful work!! Did the tubes not work as well to drop in the resin?
Thank you Karen, the tubes worked OK,just a little to slow for me.ive noticed if you let one fill up while you empty another it works better.😁👍
After finding your channel, you've inspired me to go out and buy the tools to learn to do things like this. Do you design your own patterns too or is there a good resource you can recommend?
Thank you I get most of my template from Google, just add template or silhouettes or stencil after what ever you are looking for,so for this one I searched tree of life template, two sites I've used before are pixabay or vecteezy.. copyrights free
@@fishtank5050 Thank you for your help. I can't wait to get started and will be over the moon if mine turn out half as good as yours!
@@twinsane1998 it's just practice really, enjoy and take your time..😁👍
Where did you obtain the tree pattern? Did you make it yourself?
Search tree of life silhouettes on line..plenty to go at 😁👍
Can you tell us where you got those router and CNC bits as well as the adapter? That is exactly what I need but I’m not sure where to find it.
I get my bits from ebay or amazon, if you check my Oscar the Grouch video I've got links to all the bits in the description..Good luck 👍
Beautiful work. I love it!