Thankyou, it didnt turn out to bad,getting the right colours definitely helps..I was going to scroll saw this at first,so that light could shine through the resin...but thats another project. Lol
My friend, this is special! I love the attention and the love you have put into this project. By the way, the control you have over that powerful router is impressive.
nice piece of work sir never tried the resin gonna have to give it a go .ps i have 2 scroll saws they only take the pinned ends were can i get the fittings you have to take pin less and the spiral ends and what thay called also is it an easy fit regards fellow carver
Thankyou,my scroll saw is an old draper, you get the same saw but with different brand names on..if yours as the hook at the top and bottom this clamp will fit..if not you can get a converstion kit,it all depends on what saw you have...heres the link to the adapter clamps..these take pinless and spiral blades.DRAPER 2 PIECE FRETSAW BLADE CLAMP HOLDER SET FOR 89334(DRAPER BCH) www.amazon.co.uk/dp/B008630Q2K/ref=cm_sw_r_cp_apa_i_GyTMDbSX09DCN
New to this but itchin to have a go - your stuff is inspiring. Could you leave a link to the bits you use please? I'm ordering a router shortly and a bit of a swither over the router bits to use.
Thank you Barry. Ebay or Amazon for all the bits.. Cnc bits for the lineswww.ebay.co.uk/itm/172213663526 End milling bits for the clear out www.ebay.co.uk/itm/353029506162 They have a dremel size shaft,3.175mm so you will need a adapter collet 6.35mm so they fit a router Collet www.ebay.co.uk/itm/163976348908
@@fishtank5050 Ah cheers mate - your a diamond! Pay day as well so Ill got on and order now. Have you tried the Dremel dust fan accessory? It might not fit with the router, dont know if there would be enough room, but looks good at clearing away the dust to see where you are going www.ebay.co.uk/itm/Dust-Blower-Fan-Rotary-Tools-Accessories-Fit-For-Dremel-Sander-Engraver-M8X0-75/353094444830?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20200520130048%26meid%3Da99577794ccd4426af053fbc48c47a19%26pid%3D100005%26rk%3D4%26rkt%3D12%26mehot%3Dpf%26sd%3D254630020904%26itm%3D353094444830%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b%26brand%3DUnbranded&_trksid=p2047675.c100005.m1851
@@BarryM60 I use an old black and decker dn66 router ..the bits are dremel size 3.175mm and fit a dremel no problem, however for the router you just use the adapter collet to make the bits 1/4"..shaft.
Where do you get your resin as when researched , and tried ebay but out of stock can you recommend, a good supplier, on here cheers great videos, p.s. pay pal friendly lol
once again great project, beautifully done,
that resin makes, thanx 4 sharing God Bless
Thank you Donny, I do like using resin in some projects 👍
fabulous work Shane well done
Cheers Joe,I forget some of the projects Ive done sometimes 😂😂
hypnotizing to watch
Thank you 😊
A super project and a great inspiration for me and my projects. Many greetings from Andy.
Thankyou Andy, I appreciate the comment
Beau travail good job you have vert inspiré
Thankyou I appreciate the comment...
I do like the colours you chose .
i really have to get in to having ago at this kind of thing.
and what a good idea with the drop tray
Thankyou, it didnt turn out to bad,getting the right colours definitely helps..I was going to scroll saw this at first,so that light could shine through the resin...but thats another project. Lol
thanks will check it out i have also got a draper model will check numbers on it
My friend, this is special! I love the attention and the love you have put into this project. By the way, the control you have over that powerful router is impressive.
Thankyou, I appreciate you taking the time to comment..
nice piece of work sir never tried the resin gonna have to give it a go .ps i have 2 scroll saws they only take the pinned ends were can i get the fittings you have to take pin less and the spiral ends and what thay called also is it an easy fit regards fellow carver
Thankyou,my scroll saw is an old draper, you get the same saw but with different brand names on..if yours as the hook at the top and bottom this clamp will fit..if not you can get a converstion kit,it all depends on what saw you have...heres the link to the adapter clamps..these take pinless and spiral blades.DRAPER 2 PIECE FRETSAW BLADE CLAMP HOLDER SET FOR 89334(DRAPER BCH) www.amazon.co.uk/dp/B008630Q2K/ref=cm_sw_r_cp_apa_i_GyTMDbSX09DCN
Scroll down on the link and you can see the converstion kit..
très beau
Thankyou, I appreciate the comment..
love the job you did, great work, if i may ask the routting bits, where to get them? amazon?
Most of my bits I get from Ebay or Amazon
thankyou
New to this but itchin to have a go - your stuff is inspiring. Could you leave a link to the bits you use please? I'm ordering a router shortly and a bit of a swither over the router bits to use.
Thank you Barry. Ebay or Amazon for all the bits..
Cnc bits for the lineswww.ebay.co.uk/itm/172213663526
End milling bits for the clear out www.ebay.co.uk/itm/353029506162
They have a dremel size shaft,3.175mm so you will need a adapter collet 6.35mm so they fit a router
Collet www.ebay.co.uk/itm/163976348908
@@fishtank5050 Ah cheers mate - your a diamond! Pay day as well so Ill got on and order now. Have you tried the Dremel dust fan accessory? It might not fit with the router, dont know if there would be enough room, but looks good at clearing away the dust to see where you are going www.ebay.co.uk/itm/Dust-Blower-Fan-Rotary-Tools-Accessories-Fit-For-Dremel-Sander-Engraver-M8X0-75/353094444830?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20200520130048%26meid%3Da99577794ccd4426af053fbc48c47a19%26pid%3D100005%26rk%3D4%26rkt%3D12%26mehot%3Dpf%26sd%3D254630020904%26itm%3D353094444830%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv5PairwiseWebWithDarwoV3BBEV2b%26brand%3DUnbranded&_trksid=p2047675.c100005.m1851
@@BarryM60 looks good,something so simple, wouldn't fit on the router ,but what an excellent idea if it did..👍
@@fishtank5050 Ah I see now - you are not using a Dremel drill in a router device - what is your sett up?
@@BarryM60 I use an old black and decker dn66 router ..the bits are dremel size 3.175mm and fit a dremel no problem, however for the router you just use the adapter collet to make the bits 1/4"..shaft.
Where do you get your resin as when researched , and tried ebay but out of stock can you recommend, a good supplier, on here cheers great videos, p.s. pay pal friendly lol
Still some on Ebay or Amazon, house of resin is a good site...rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F392269100647
May I ask from where did you get the stencil that you used?
If you Google search Celtic cross and put template or stencil or even silhouettes after Celtic cross, it comes up and plenty more...
Where do I get the c&c bits from, I can only find america
You can find all the bits on Ebay or Amazon..
why not use a syringe?
You could do ,I've tried before, I just found it was a little hard to control the flow..then there's the cost of syringes, you can only use them once