Make sure you idle your truck, and release trailer brake. Idle truck with trailer brake released for 5 minutes, after 5 minutes, with trailer brake still released, push in the pin button. It should help. If it dont help, check for air leaks on trailer. This system stops working imediatelly once you have air leak
TODOS HACEN EL MISMO VIDEO DE LAS BOLSAS DE AIRE PERO AY OTRO PROBLEMA ES CUANDO LOS PINES SE ATORAN Y NO SALEN TIENES QUE MOVERLOS CON UN DESARMADOR PARA ARRIBA Y PATA LOS LADOS QUE ES ? AY DESGASTE EN EL PIN O KE ?
Since your spring is already broken, remove the Pin/Bolt shown on 1:37 on my video, take a hammer, and hammer this pin OUT of the slot (In my video 1:41 on right side over the marked red area), so it would fly out on the ground. Once you will be installing new pin, you have to put it back same way, and install this holding pin shown on 1:37. I hope it will help.
Hello. If the release valve itself is leaking, make sure your air pressure stays above 100psi (with TRAILER BRAKES RELEASED). If air pressure is higher than 100psi, need to replace the valve in any shop. Most of the shops can do it, and price for this job is around 150-200$.
Push-button version is a pain in the arse. 🚛💥💨
Very useful information
Many thanks for sharing with us 👍👍👍
Great video thanks 👍
Just got back into this hiway stuff thx for reminder
Have you got the original pin installed, or still having it ziptied? :D
@@bentheserviceguy hah oh no ziptie yet at least
Thanks for all
Having same problem, because air pressure low the pin not going in, but trailer gauge and air bags show pressure is ok, how can I fix it?
Make sure you idle your truck, and release trailer brake. Idle truck with trailer brake released for 5 minutes, after 5 minutes, with trailer brake still released, push in the pin button.
It should help. If it dont help, check for air leaks on trailer. This system stops working imediatelly once you have air leak
Perfect 👍 👍💪
Glad it helped!
TODOS HACEN EL MISMO VIDEO DE LAS BOLSAS DE AIRE
PERO AY OTRO PROBLEMA ES CUANDO LOS PINES SE ATORAN Y NO SALEN
TIENES QUE MOVERLOS CON UN DESARMADOR PARA ARRIBA Y PATA LOS LADOS
QUE ES ? AY DESGASTE EN EL PIN O KE ?
How to unlock if that air tube is leaking which pulls the pins inside?
is it hard to replace the springs? do you have any tips on how to do it?
Since your spring is already broken, remove the Pin/Bolt shown on 1:37 on my video, take a hammer, and hammer this pin OUT of the slot (In my video 1:41 on right side over the marked red area), so it would fly out on the ground. Once you will be installing new pin, you have to put it back same way, and install this holding pin shown on 1:37. I hope it will help.
Hi I’m having a leak on the release valve the one that makes the pins go in and out
Hello. If the release valve itself is leaking, make sure your air pressure stays above 100psi (with TRAILER BRAKES RELEASED). If air pressure is higher than 100psi, need to replace the valve in any shop. Most of the shops can do it, and price for this job is around 150-200$.
Spray the pins with slide lunricant in and around the pin holes. Also hav e arubber mallet to tap them in in case they stick in the whole.