How to Replace Spark Plugs 2011-2019 Ford Fiesta

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024
  • Buy Now!
    New Spark Plug Set from 1AAuto.com 1aau.to/ia/1AET...
    Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage. This video shows you how to install new spark plugs on your 2011-2019 Ford Fiesta.
    This process should be similar on the following vehicles:
    2011 Ford Fiesta
    2012 Ford Fiesta
    2013 Ford Fiesta
    2014 Ford Fiesta
    2015 Ford Fiesta
    2016 Ford Fiesta
    2017 Ford Fiesta
    2018 Ford Fiesta
    2019 Ford Fiesta
    Tools you will need:
    • 16mm Socket 1aau.to/ob/1AXA...
    • 5/8 Inch Spark Plug Socket
    • 1/4 Inch Ratchet 1aau.to/ob/1AXA...
    • 3/8 Inch Drive Ratchet 1aau.to/ob/1AXA...
    • Gloves 1aau.to/od/1AXS...
    • Safety Glasses 1aau.to/od/1AXA...
    Subscribe: / @trq
    Check out our playlist:
    Ford Fiesta 2011-2019 6th Generation: • Ford Fiesta 2011-2019 ...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто/МотоАвто/Мото

Комментарии • 11

  • @TRQ
    @TRQ  2 года назад +4

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @ms.m.2052
    @ms.m.2052 Год назад +15

    THAT'S IT?! I CAN DO THAT
    Thank you

  • @Miamiz24
    @Miamiz24 Год назад +5

    I just replaced mine with Fords 525x Motorcraft and all 4 need it to be gaped to .32 they where way closer than that, i work at autoparts store and always tell my customers to double check since the same plug can be used for different applications with different gaps

  • @yzrahmazkorro2715
    @yzrahmazkorro2715 2 года назад +2

    Thank you so much!!!! This video is exactly what I needed right now👌🏻

  • @SebLikesCars99
    @SebLikesCars99 Год назад +1

    Thanks helped me service my moms fiesta

  • @oden5011
    @oden5011 Год назад +2

    I changed the spark plugs on my 2012 ford fiesta. I noticed that the thread stops almost halfway for the 4 spark plugs, this is also the case for the old ones. These are all motorcraft parts. is that normal?

  • @Robert-pq3sb
    @Robert-pq3sb 5 месяцев назад +1

    What is gapping?

  • @kristoffscuba5466
    @kristoffscuba5466 Год назад +2

    Didn’t look like that was torqued to 11 foot pounds when you hand two hands on the ratchet loosening it. 😂

  • @SurviveUntilSunrise
    @SurviveUntilSunrise 2 года назад +2

    Wait. How do you know where to wrench the sparkplug so it’s down to 11 footpounds? Did you use some kind of socket wrench with a special sensor???

    • @corail53
      @corail53 2 года назад +5

      He used a torque wrench.

  • @ricardosaintsaint
    @ricardosaintsaint Год назад

    Thanks !!!