Considering the effort and time I put into making a 212 powered yard kart, I am like beyond amazed at the quality of your work. Like I thought I climbed a hill, but christ in heaven you have put together something incredible.
When you're using a little 110w welder like that it gets to a duty cycle and overheats and it shuts down you got to wait a little bit before it turns back on.
The welding machine stopped working because you ran it up to its maximum duty cycle. Try letting it cool down for 10 minutes when you run it at high amps for steady periods of time. I'd trust that lincoln over any harbor freight welder, anyday
Yeah cuz you're only saving about 300 350 bucks buying a Harbor Freight welder although their products are getting much better through the years I would only buy one for a one-time-use then take it back
Personally The titanium welders are equivalent to their Lincoln and Hobart counterparts. This has a digital display, inductance inverter technology, and is very light. A 1000$ Lincoln doesn't offer that much. We will have to see if it is a reliable machine with time. I'll have to upgrade again in a few years
Love seeing young guys your age out in the garage working with their hands instead of inside playing video games. must respect my dude, you're very talented. If I could give you a tip, the next time do you need to remove a dent from a 2-stroke chamber pipe you can cap off both ends and fill the pipe with compressed air and the den will actually come out. Just Google two-stroke chamber pipe repair.
I find alot of people’s homemade paddle shifters on go karts don’t look that good... but holy crap man those look slick along with everything else on the kart! Keep doing what you’re doing man awesome work
I like the radiator setup, if you don't like the look of the hoses, you can weld guides for the hoses to go through, won't really change anything but might look better, if you don't like the color you can paint em
You just need to get this thing going already even a test rip instead of an episode every so often just ride it already that what most of us are here for!!
Quick tip with the exhaust. Next time you get a dent in it, fill it up with water and plug both ends then put it in the freezer. When the water freezes it expands and pushes the dent out! Also loved the tip with the frayed cable! definitely going to use that one!
That's awesome vasily, I cant wait to see it rip!! Take your time an make sure she is done right... cause I believe she gonna be fastttt!! Thank you for the video, be safe out there!
Excellent job! I love projects like this and the learning that goes with it. I would suggest you do some research on Ackermann Steering, I really think it could help the performance of your cart. I am no expert myself, but without it you are definitely leaving some traction potential on the table and the fastest any cart can go is only as fast as the tires will allow it. Only trying to help my friend! Either way I am sure the fun factor on that thing is through the roof!!! I love two strokes.
Good luck welding in a breeze or in a stagnant environment with leathers on and not get heat exhausted. Been there, done that. Gas is better....sometimes.
@@robspear03 Flux core definitely has its place. My welding is basically all indoors, so gas works best for my purposes. That being said, I keep a roll of flux core around because I do need it sometimes.
Always great work! I have a Weld-Pak 110HD and my trigger is as fickle as my wife!! Your kart is shaping up nicely! Totally agree with Craig on the neck brace - when you hit that powerband watch out young man you're in for a real treat LOL! That kart is gonna scoot right out from underneath you when it tachs up.
Hey, another amazing video. I've seen the refrigerator circuit. I'm not sure of what I've seen, only one tube going from the cylinder head to the radiators? There's supposed to be 2
Very nice! I think the hoses that are wrapped in stainless would look cool. I’ve always been of mind that there should be no restrictions in airflow. Wouldn’t the straightest possible exhaust be dest? Keep it up!
4:30am,saw Vasily Custom Builds..Awesome work,as always.! I like the looks of the exhaust and it didn't look like you affected flow.Throw some gravel in it and Shake=No worries about wire pieces.That is going to really rip.
whoowhoooo, test run ahead! Very vell done! I`m sure you`ll be one of the best construction guys when you keep doing what you do! I like the welding trick with the cable! :-)
Hey buddy hope your able to keep your desire to build cool items. I know from experience that to keep those creative juices flowing after you have built some of your dream items. So keep pushing and thinking outside the box to create new and awesome machines. I at times get caught up on making one aspect of my project to be perfect. I have to keep reminding my self that I can always upgrade it after I get it to actually operational. Meaning able to crank and operate it test it and make certain all my finished parts are holding up to what abuse I can through at it. Lol keep up the great builds brother
First, let me say your doing an awesome job! But, with that much hp and potential speeds up to 100mph or better, you should really think about adding front brakes as well. I wouldn't even consider running my 125 shifter kart (45hp maybe) without front brakes.
Damn I have to say the cart came out sexy as hell and as a fan we're all proud of you for accomplishing this task and for taking advice from us I speak for all of your fans (Great fucking job👏) keep the videos coming
as long as you keep all those exhaust chambers connected together as they were cut apart and dont shorten it or anything, it will work exactly as it did before, just with a different shape. The only reason they are all curved and whatnot, is to be able to fit the resonance chambers within the frame of a bike.
Nice job, as always !!! I am almost done with my 600cc 4 cylinder Kawasaki Ninja Zx6R shifter cart with 130 HP XD I can send some pictures if you want to see.
Great video and i bet you learned some more about welding since this project has started. Welds look good. Duty cycle is real when you weld more than 1 thing XD
Heck yea man awesome I can’t wait to see it running. It’s gonna fly lol plz wear protection though rather be safe than sorry you know. But heck yea I’ve been waiting on this since part 2 which made me watch Part 1. But definitely worth the wait for us and I know it’ll be worth all that hard work you’ve done when you send it.
you cant just build a two stroke expansion chamber. They are fine tuned to push back excess fuel and air that was not used back into the cylinder. You can take a built pipe and twist it around, but it must be in the same order that it was before. you will loose horsepower if not. That was a brief review on what they actually do, go look up some videos. Ive learned alot from them. you need a special cad or you need to be a math wizard to build one lol. Good luck on the sweet build. looking good!
If you aren't happy with those rad hoses, you could always look into sleeving them, while using the sleeve itself to tuck away any wiring that may cross.
Yeah because he probably heated up the electronic switch on the end of the trigger running it so hot you have to let any welder cool down I love my 140 gas Lincoln welder I welded a large thick exhaust flange on my Chevy pickup because the gasket kept leaking it did a wonderful job made a nice Beed had the amps up pretty high in order to penetrate the thick flange
hey bud on that exhaust if they have dents you can use water to pop them out block it off on one end and fill full build a hookup for a pressure washer or air hose and with little effort 90% of all dents will be gone just wear p.p.e
Can you explain how the welder works with and without gas? I have welded a bit with gas with a thing like that in my school but i didn't know you can use them without gas
Yes you don't need gas if you run self - sheilded wire. The wire has the flux inside, it is hollow. That burns off as you weld and it sheilds the weld. Usually you have to reverse the polarity to dcen
you know what a good trick is to get dents out of your 2 stroke pipes or any pipes i guess is fill it with water, tape the ends and put it in the freezer... check on it every 20 min or so and as soon as the dent pops take it out. The first time i did this years ago on my 125 i left it for acouple hours or so and it split my pipe but it was only a 2 inch split and im a welder so was an easy fix but if you dont want a split make sure you check it regularly
The curves in the expansion chamber dont matter, do your self a favor and Google how an expansion chamber works. Once you understand that, its simple. I had an old Honda Odyssey and built my own fron scratch. I used a glass pack car muffler, just took out the filling. That worked better than the stock expansion chamber. Very easy, take the hour or so and read about expansion chambers, it will help in future builds. Good job on the go kart, it looks great.
Amazing skills for your age.... You will enjoy a very successful future.... Great vids also .... Very enjoyable to watch you work kiddo!!!! Two thumbs all the way!!!!
The Lincoln welder shut off and the gun stopped working probly because you hit the maximum duty cycle. Which means you ran the thing balls to the wall and it said no. Should be a sticker somewhere on the Lincoln welder with a number out of 10 (7/10 for ex). The number before is the time you can weld straight through that amount of time... So 7/10 you can weld for 7 mins with 3 mins of cool down
Even if there is weld spatter and crap on the inside of the pipe it will continue to work fine, there is no problem with the pipe, It will work just fine and be just fine.
I'm a fan of yours! DIY a LOT of stuff myself :). There are a ton of tutorials on how to safely and nicely, remove dents in 2 smoke pipes... I would have ordered a single radiator, instead of 2!.
Bro that cart is dope can’t wait to see this thing rip down the steet but I did notice that exhaust it may melt your seat but I’m not there just looking out maby a heat shield !
You need a larger rear sprocket. The dirt bike from the motor probably came with a 50 to 52 tooth sprocket and most 250 two strokes will go about 70 or maybe more. The power will be in high RPM, so top of third you will be going very fast not being able to use the power in all five gears. Consider finding a 45 to 48 tooth if it fits. Just my thoughts.
Yo I feel yah on the spoiler and the front fender but remember to pace yourself quality makes a world of difference. I understand the more you grow the time restraints get even more time restraining but I enjoy watching you take the time to get it right. Keep getting it right .take it easy little brother. Much love. Be blessed Jah Rastafari Selassie I Jah
@@VasilyBuilds thanks for your support it is an honor I'm coming with a mini Chopper video soon I hope to see you there little brother. Much Ras-pect and love . Your Great Be blessed Jah Rastafari Selassie I Jah
You might need to make some balance to the weight distribution and also consider getting some aero on that thing, cause it looks like is gonna be hella quick!
Please upload the next episode of this amazing series as soon as possible.I CANT WAIT
I will try to asap!
Δεν είσαι ο μόνος Σταύρο χαχα
Considering the effort and time I put into making a 212 powered yard kart, I am like beyond amazed at the quality of your work. Like I thought I climbed a hill, but christ in heaven you have put together something incredible.
When you're using a little 110w welder like that it gets to a duty cycle and overheats and it shuts down you got to wait a little bit before it turns back on.
The welding machine stopped working because you ran it up to its maximum duty cycle. Try letting it cool down for 10 minutes when you run it at high amps for steady periods of time. I'd trust that lincoln over any harbor freight welder, anyday
Yeah same here even though i have a harbour freight welder i like both millers and Lincoln's about 20 times better
Lincoln electric for the win. ineed to get another red stone Lincoln stick welder.
Yeah cuz you're only saving about 300 350 bucks buying a Harbor Freight welder although their products are getting much better through the years I would only buy one for a one-time-use then take it back
you can get a red tombstone welder for 350 dollars industry standard stick. no gas no non-sense just get the best sticks for what you are working on.
Personally The titanium welders are equivalent to their Lincoln and Hobart counterparts. This has a digital display, inductance inverter technology, and is very light. A 1000$ Lincoln doesn't offer that much. We will have to see if it is a reliable machine with time. I'll have to upgrade again in a few years
That wing is INSANE🔥🔥
Love seeing young guys your age out in the garage working with their hands instead of inside playing video games. must respect my dude, you're very talented. If I could give you a tip, the next time do you need to remove a dent from a 2-stroke chamber pipe you can cap off both ends and fill the pipe with compressed air and the den will actually come out. Just Google two-stroke chamber pipe repair.
The kart is looking awesome brother. Can’t wait to see it run
Dude, I love this build series! Enjoy watching the entire build process! Keep up the good work!
I find alot of people’s homemade paddle shifters on go karts don’t look that good... but holy crap man those look slick along with everything else on the kart! Keep doing what you’re doing man awesome work
took a week haha thank you!!
I like the radiator setup, if you don't like the look of the hoses, you can weld guides for the hoses to go through, won't really change anything but might look better, if you don't like the color you can paint em
Kart looks awesome brother cant wait to see it run
Thank you brother!
Yesssssss Vasily! Great vid, JUST waiting for the pt. 3 of the motorized 2 stroke scooter! Can't Wait to hear that MZ65 Scream!
Soon I just made a huge investment! 😃
Sweet I cant wait for the first start up and ride. Good job to the videos have gotten alot better since the first one I watched.
Your videos are class bro. Keep it up. You will need a neck brace on the Go kart. The power band is going to be Hella crazy 🦄💨💨💨 beast mode
You just need to get this thing going already even a test rip instead of an episode every so often just ride it already that what most of us are here for!!
If it was that easy, then yes. I should be able to get it going this week
Quick tip with the exhaust. Next time you get a dent in it, fill it up with water and plug both ends then put it in the freezer. When the water freezes it expands and pushes the dent out! Also loved the tip with the frayed cable! definitely going to use that one!
Take notes carsandcameras
I aint hating on carsandcameras but I feel like the quality of their content has declined a lot in the past months
@@iansmith5052 i agree man
They are stuck in the old days, they need to build stuff from scratch instead of reusing old rusted and beat up karts
@@juancarlosruiz1985 they really are stuck in the past.
Dude, you're brilliant. Keep sending us your builds
Thank you!
This is awesome, can wait to see it running. Nice job bro!
Nice work and a nice welder
That kart is serious. Great build.
That's awesome vasily, I cant wait to see it rip!! Take your time an make sure she is done right... cause I believe she gonna be fastttt!! Thank you for the video, be safe out there!
Excellent job! I love projects like this and the learning that goes with it. I would suggest you do some research on Ackermann Steering, I really think it could help the performance of your cart. I am no expert myself, but without it you are definitely leaving some traction potential on the table and the fastest any cart can go is only as fast as the tires will allow it. Only trying to help my friend! Either way I am sure the fun factor on that thing is through the roof!!! I love two strokes.
so long waiting for this part, finally update... ✊
Gas is also a hundred times better than fluxcore wire, cleaner welds in a lot less clean up afterwards.
Good luck welding in a breeze or in a stagnant environment with leathers on and not get heat exhausted.
Been there, done that. Gas is better....sometimes.
@@robspear03 Flux core definitely has its place. My welding is basically all indoors, so gas works best for my purposes. That being said, I keep a roll of flux core around because I do need it sometimes.
Sick kart man. That thing is going to be silly fast and fun.
Always great work! I have a Weld-Pak 110HD and my trigger is as fickle as my wife!! Your kart is shaping up nicely! Totally agree with Craig on the neck brace - when you hit that powerband watch out young man you're in for a real treat LOL! That kart is gonna scoot right out from underneath you when it tachs up.
Good job can't wait for the test drive.
Whew it is awesome
Man thats awesome! Keep it up🔥
soon
your skill set is amazing bro love it
Such wisdom from such youth thanks for the frayed cable tip
thank you It was shared to me
That is the sickest kart ever
honestly u remind me of the guys at goonzquad garage
agree
Twin brother!
Right that’s crazy lol they’re friends and live in the same city
They have to be related!
Cousins no doubt
Hey, another amazing video. I've seen the refrigerator circuit. I'm not sure of what I've seen, only one tube going from the cylinder head to the radiators? There's supposed to be 2
Yes I left it off, because I am waiting for a new pipe and want to see if it clears
The best youtube videos of all time , your the best ! Keep it up 🤩
Sick build man I like how you didn't cheap out on anything.. liked and subscribed to see more builds keep up the good work!!
bro so close to seeing this thing running
We missed you thanks for the video
Thank you for the support!
Anytime 👍🏼
This is gonna be sick
Thumbs up !!! so excited to see this Bad Boy Kick'n up some asphalt.... Awesome Edits on your videos as well as an Amazing project … God bless !
Looks sick
Credit to you mate... great skills .
You my friend are going places, if you're not already there 👍😎
Sweet video! The kart looks dope🔥
Mxrider2stroke Braaap ayyy
Looking good ,been watching your progress , I built one in 2011, mine runs a CR500 motor , looking forward to seeing how she goes 😀
Literally, i jave been waiting forever for this video
Very nice! I think the hoses that are wrapped in stainless would look cool.
I’ve always been of mind that there should be no restrictions in airflow. Wouldn’t the straightest possible exhaust be dest?
Keep it up!
I think so! Thank you
really great episode. can't wait for next.
The pipe the way you made it looks beautiful I'll just try running it
Dude i love what your doing you have skills.
4:30am,saw Vasily Custom Builds..Awesome work,as always.! I like the looks of the exhaust and it didn't look like you affected flow.Throw some gravel in it and Shake=No worries about wire pieces.That is going to really rip.
That's an awesome cart man
I always wanted to do what you have done.
whoowhoooo, test run ahead! Very vell done! I`m sure you`ll be one of the best construction guys when you keep doing what you do!
I like the welding trick with the cable! :-)
It’s amazing what you build. Keep up the good work. You have my like button.
Hey buddy hope your able to keep your desire to build cool items. I know from experience that to keep those creative juices flowing after you have built some of your dream items. So keep pushing and thinking outside the box to create new and awesome machines. I at times get caught up on making one aspect of my project to be perfect. I have to keep reminding my self that I can always upgrade it after I get it to actually operational. Meaning able to crank and operate it test it and make certain all my finished parts are holding up to what abuse I can through at it. Lol keep up the great builds brother
Thank you brother!
First, let me say your doing an awesome job! But, with that much hp and potential speeds up to 100mph or better, you should really think about adding front brakes as well. I wouldn't even consider running my 125 shifter kart (45hp maybe) without front brakes.
If the opportunity comes I will
damn, 45hp 125? i want that shit! howd you do that?
The frayed cable trick reminded me to like the video😂
Damn I have to say the cart came out sexy as hell and as a fan we're all proud of you for accomplishing this task and for taking advice from us I speak for all of your fans (Great fucking job👏) keep the videos coming
as long as you keep all those exhaust chambers connected together as they were cut apart and dont shorten it or anything, it will work exactly as it did before, just with a different shape. The only reason they are all curved and whatnot, is to be able to fit the resonance chambers within the frame of a bike.
Dude you have done a amazing job 👍👍
you should get a street bike radiator it would look sick and keep your engine running even cooler
I just built a turbo zx10r engine.........would 450hp be too much for a shifter kart?
Nah 😂
Looks really good m8 spot on you did it again carry on the good builds😀
Nice work! Keep it up !
finally I been waiting for this video to be out
Nice job, as always !!!
I am almost done with my 600cc 4 cylinder Kawasaki Ninja Zx6R shifter cart with 130 HP XD
I can send some pictures if you want to see.
Dang that sounds like it's going to kill!!
@@VasilyBuilds hopefully not me XD We'll see...
😂"itl be fine"
You should post something love to see it id follow up on even if it just pictures
@@michaelgarrido8810 i'll try
Great video and i bet you learned some more about welding since this project has started. Welds look good. Duty cycle is real when you weld more than 1 thing XD
Looking amazing!
Heck yea man awesome I can’t wait to see it running. It’s gonna fly lol plz wear protection though rather be safe than sorry you know. But heck yea I’ve been waiting on this since part 2 which made me watch Part 1. But definitely worth the wait for us and I know it’ll be worth all that hard work you’ve done when you send it.
Sheesh‼️🔥🔥 my boy is creating a beast😍😍
Also I got a question what kind of welder do you use I'm planning on building a 125 shifter cart in the next years but I need to buy a welder first.
you need any welder and just practice. lincoln 110 weld pak
@@VasilyBuilds Thank you I'm currently in a welding class in school right now I've been getting really good at welding
I think I’d want a firewall in between that engine and my spine and head. Not to mention that hot exhaust! Sweet kart build though!
you cant just build a two stroke expansion chamber. They are fine tuned to push back excess fuel and air that was not used back into the cylinder. You can take a built pipe and twist it around, but it must be in the same order that it was before. you will loose horsepower if not. That was a brief review on what they actually do, go look up some videos. Ive learned alot from them. you need a special cad or you need to be a math wizard to build one lol. Good luck on the sweet build. looking good!
If you aren't happy with those rad hoses, you could always look into sleeving them, while using the sleeve itself to tuck away any wiring that may cross.
Thanks for the inspiration brother. New sub, this is awesome.
This thing is so sick
Yeah because he probably heated up the electronic switch on the end of the trigger running it so hot you have to let any welder cool down I love my 140 gas Lincoln welder I welded a large thick exhaust flange on my Chevy pickup because the gasket kept leaking it did a wonderful job made a nice Beed had the amps up pretty high in order to penetrate the thick flange
hey bud on that exhaust if they have dents you can use water to pop them out block it off on one end and fill full build a hookup for a pressure washer or air hose and with little effort 90% of all dents will be gone just wear p.p.e
I got scared there for a minute. When you started cutting on that pipe buddy. I know they are not cheep. I like your doing a good job.
Haha yeah I messed up a lil
Can you explain how the welder works with and without gas? I have welded a bit with gas with a thing like that in my school but i didn't know you can use them without gas
Yes you don't need gas if you run self - sheilded wire. The wire has the flux inside, it is hollow. That burns off as you weld and it sheilds the weld. Usually you have to reverse the polarity to dcen
Flux core wire requires no gas.
@@VasilyBuilds oooh ok that makes sense thanks dude
you know what a good trick is to get dents out of your 2 stroke pipes or any pipes i guess is fill it with water, tape the ends and put it in the freezer... check on it every 20 min or so and as soon as the dent pops take it out. The first time i did this years ago on my 125 i left it for acouple hours or so and it split my pipe but it was only a 2 inch split and im a welder so was an easy fix but if you dont want a split make sure you check it regularly
The curves in the expansion chamber dont matter, do your self a favor and Google how an expansion chamber works. Once you understand that, its simple. I had an old Honda Odyssey and built my own fron scratch. I used a glass pack car muffler, just took out the filling. That worked better than the stock expansion chamber. Very easy, take the hour or so and read about expansion chambers, it will help in future builds. Good job on the go kart, it looks great.
Amazing skills for your age.... You will enjoy a very successful future.... Great vids also .... Very enjoyable to watch you work kiddo!!!! Two thumbs all the way!!!!
Thank you!!
You just hit the duty cycle on your welder brother. Gotta cool down before you can weld again! Nothing wrong with it!
The Lincoln welder shut off and the gun stopped working probly because you hit the maximum duty cycle. Which means you ran the thing balls to the wall and it said no. Should be a sticker somewhere on the Lincoln welder with a number out of 10 (7/10 for ex). The number before is the time you can weld straight through that amount of time... So 7/10 you can weld for 7 mins with 3 mins of cool down
Haha yeah that was probably it
Even if there is weld spatter and crap on the inside of the pipe it will continue to work fine, there is no problem with the pipe, It will work just fine and be just fine.
I'm a fan of yours! DIY a LOT of stuff myself :). There are a ton of tutorials on how to safely and nicely, remove dents in 2 smoke pipes... I would have ordered a single radiator, instead of 2!.
Keep up the amazing work man. I click on these videos the second i get a notification :D
Bro that cart is dope can’t wait to see this thing rip down the steet but I did notice that exhaust it may melt your seat but I’m not there just looking out maby a heat shield !
You should have another pipe running within the radiator and the engine, shouldn’t you?
Waiting the next video don’t be late 🔥🇧🇭❤️
You've came a long way!!!💯😎🖤
You need a larger rear sprocket. The dirt bike from the motor probably came with a 50 to 52 tooth sprocket and most 250 two strokes will go about 70 or maybe more. The power will be in high RPM, so top of third you will be going very fast not being able to use the power in all five gears. Consider finding a 45 to 48 tooth if it fits. Just my thoughts.
I have a guy with the same setup. told me an 12/18 tooth worked best for him. I have 11/22
Dustin Nolen dude look at the size difference in the wheels between a motorcycle and a cart. Nothing about gearing will be the same.
Nice work brotha! Reach for 70hp!
Insane
Insanity 🔥
Yo I feel yah on the spoiler and the front fender but remember to pace yourself quality makes a world of difference. I understand the more you grow the time restraints get even more time restraining but I enjoy watching you take the time to get it right. Keep getting it right .take it easy little brother. Much love.
Be blessed Jah Rastafari Selassie I Jah
Thank you Rasta!
@@VasilyBuilds thanks for your support it is an honor I'm coming with a mini Chopper video soon I hope to see you there little brother. Much Ras-pect and love . Your Great
Be blessed Jah Rastafari Selassie I Jah
Amazing work! Great welds!
thanks john
Hey I would look up how to make bullet proof plates out of welding curtains an resin it may help you with the fiberglass moldings
You might need to make some balance to the weight distribution and also consider getting some aero on that thing, cause it looks like is gonna be hella quick!