CAP BOOTCAMP! 🧢| Cap embroidery on the EM 1010: STEP-BY-STEP! (Embroidery Hub Ep 87)

Поделиться
HTML-код
  • Опубликовано: 30 янв 2025

Комментарии • 77

  • @huevonalupita
    @huevonalupita 5 лет назад +9

    It is amazing how Ricoma's RUclips channel has grown so much in just a few months, you guys are doing a great job, keep it up 😁👍

  • @ronniegonzalez8622
    @ronniegonzalez8622 5 лет назад +1

    Yeah!! 20K!

  • @shirleyking7974
    @shirleyking7974 5 лет назад +3

    I love your videos! Thank you for all you do 👍🏻

  • @sweetbushstudiochannel4606
    @sweetbushstudiochannel4606 4 года назад +1

    Straight up petrified to do hats, my machine hasn’t even shipped but I see so many people have issues. I’m going to follow all your advice when I get the machine. Thanks again for your videos

    • @ricomatv
      @ricomatv  4 года назад +1

      Watch ALL our Cap videos and practice a lot! You'll get it!

  • @mattarciaga6042
    @mattarciaga6042 5 лет назад +8

    Painters tape on the bill so if it rubs on the machine while embroidering it doesn’t leave a wear mark 💪🏽

  • @leviteapparel
    @leviteapparel 5 лет назад +2

    LOTS TO LEARN THANK YOU. I HAVE PE

  • @desireealba2781
    @desireealba2781 2 года назад

    My online training is scheduled for this Friday & I'm expected to have my hat ready to be embroidered. I can't seem to get the sweatband underneath the metal tab with the groove line in it. & this video did not show how she was able to do that . 😪

    • @ricomatv
      @ricomatv  2 года назад

      Hi! Please send our team an emails so they can walk you through service@ricoma.com

  • @chucklyman8161
    @chucklyman8161 Год назад

    how do i set up a graphic to put on a hat that would be either to the left or right side of the center of the front of the hat on a ricoma 1010 Please?

    • @ricomatv
      @ricomatv  Год назад

      Hi Chuck! You can digitize it to be on different locations.

  • @10star9
    @10star9 5 лет назад +1

    Thank You

  • @corneliushughes8797
    @corneliushughes8797 5 лет назад

    I want to see if you guys can do a video doing embroidery on the side and the back of the hat please I’m looking to buy the MT1502.

    • @ricomatv
      @ricomatv  5 лет назад

      Hello we have some videos on this
      ruclips.net/video/92blIuRGVdQ/видео.html
      ruclips.net/video/D0v6vuFDoWg/видео.html
      Hope it helps

  • @3larsons
    @3larsons 5 лет назад

    Super helpful - Thx!

  • @bridgettevincent4245
    @bridgettevincent4245 5 лет назад

    Hi.. if I don't have any 80/12 sharp, can I use 80/12 Ball point?

  • @jasminelightburn9150
    @jasminelightburn9150 2 года назад

    Any specific suggestions when embroidering a 5 panel hat ?

    • @ricomatv
      @ricomatv  2 года назад

      Hi! You can check out this previously done video on our RUclips channel, hopefully this helps!
      ruclips.net/video/g9UF3iKy8O0/видео.html

  • @DarylMuniz1
    @DarylMuniz1 4 года назад +1

    Hi Can you Embroider on the side and back of caps with this machine also?

    • @ricomatv
      @ricomatv  3 года назад +1

      Hi Daryl, thanks so much for watching. Yes, you can!

  • @angeltokarski2257
    @angeltokarski2257 5 лет назад

    Any tips for stitching the new poly spandex structured hats? I had trouble with it being out of registration, I doubled the backing and still had issues. I did not try temporary adhesive spray or binder clips. Machine was set at 480 spm

    • @ricomatv
      @ricomatv  5 лет назад +1

      Hey there we will look into these.

  • @carinabam5833
    @carinabam5833 2 года назад

    how far from the brim must we emb a design

    • @ricomatv
      @ricomatv  2 года назад

      Hi there! Check out this video that shows the best practices/tips that can help you ---->ruclips.net/video/nl9UTNJwxLk/видео.html

  • @hellaphant224
    @hellaphant224 3 года назад

    How low to the brim can a design be stitched? I have a brother machine and looking to switch out due to the brim getting in the way.

    • @ricomatv
      @ricomatv  3 года назад

      cebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

  • @northwest_hvac
    @northwest_hvac 4 года назад

    I have a brother pr 670e , I’m completely new to embroidery but I’m having trouble seeing on patches, when I make my placement stitch and the actual stitch it always comes out bigger then what I program, why do you think that is? Love your videos btw just found them the other day

    • @ricomatv
      @ricomatv  4 года назад

      Join our free face book group and make a post. Someone will be more than happy to help. facebook.com/groups/embroiderymastery/

  • @oljoe28
    @oljoe28 4 года назад

    How are you able to get the design so close to the brim seam of the hat?

    • @ricomatv
      @ricomatv  4 года назад

      contact our support team and they will walk you through it!

  • @victoriabateman1262
    @victoriabateman1262 Год назад

    Can you embroider on sneakers with an em 1010?

    • @ricomatv
      @ricomatv  Год назад

      Absolutely! ruclips.net/video/USx41BEiwDA/видео.htmlsi=x--mpVqqVuxln_Oa

  • @Godly1.0
    @Godly1.0 5 лет назад

    I have an EM1010 and my customer wants his logo on the left side of the hat close to the brim. I keep hearing you can embroider as close as 1/2 inch from the brim, but it won't let me. I get the error of the Y or X and my design is 1 and 1/2 inches from the brim. How do I change the threshold for this?

    • @ricomatv
      @ricomatv  5 лет назад

      I suggest getting in contact with our support team so they can assist you with this. ricoma.com/US/contact-us

  • @angelroldan3585
    @angelroldan3585 4 года назад

    I just bought this machine love your videos I’m actually opening it now lets see how this goes 🤦🏽‍♂️ lol

    • @ricomatv
      @ricomatv  4 года назад

      Thank you! we're here to help for everything!

  • @Str8kustomz
    @Str8kustomz 5 лет назад +1

    Well done👏👏 my question is do you have to have a resellers license to buy those blank hats? and how can we follow on IG? Thanks!

    • @ricomatv
      @ricomatv  5 лет назад

      Hello. Yes here at ricoma we do have the license.
      You can follow us on IG here: instagram.com/ricomahq/?hl=en

  • @heyyou4089
    @heyyou4089 4 года назад

    I just got my em-1010 and have only done a couple hats. Have guy found that the machine rubs on the bill of the hat and leaves a mark? Is there a way to avoid that?

    • @ricomatv
      @ricomatv  4 года назад

      Hi there, contact our tech support and they will walk you through how to avoid this: ricoma.com/us/tech-support

  • @justmalaria
    @justmalaria 4 года назад

    Hi..My friend just bought a Ricoma 1010, I am trying to help him but we don’t know how to go from flat driver to cap driver . The panel arrows does not want to go to the front. Please help us

    • @ricomatv
      @ricomatv  4 года назад

      Hi for help with this make sure to contact support here - ricoma.com/US/tech-support

  • @mrsphenomenalcreations1343
    @mrsphenomenalcreations1343 4 года назад

    Can you do a video from creating a hat design in the software to taking it the machine show how to get the correct size for the hat hoop? Other than just a name please.. very new that embroidery an multi needle embroidery

    • @ricomatv
      @ricomatv  3 года назад

      Hi there, thanks so much for watching. Please check out this video for more info: ruclips.net/video/hCjEfRBHsUI/видео.html

  • @eliasgonzalez4010
    @eliasgonzalez4010 5 лет назад

    Trying to get the logo closer to the brim with the EM 1010- when tracing the brim jams up the hat and stops it from rotating so the hat ends up off center is there a fix for this?

    • @ricomatv
      @ricomatv  5 лет назад

      If you are having issues please contact our support team.
      ricoma.com/US/contact-us

  • @frantori626
    @frantori626 5 лет назад

    Hay extremely helpful but I have one problem when I’m embroider Dadhats the brim of the hat pushes up aguantes the machine and that’s making my design flag. Any help ?

    • @frantori626
      @frantori626 5 лет назад

      Using the em 1010 btw

    • @ricomatv
      @ricomatv  5 лет назад

      Hey there. Reach out to our support team for help
      ricoma.com/US/tech-support

  • @SpikegamingThepro
    @SpikegamingThepro 3 года назад

    Hello, what is the tallest design you can do on a hat

    • @ricomatv
      @ricomatv  3 года назад

      Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

  • @stephaniemielbeck8821
    @stephaniemielbeck8821 5 лет назад

    I embroidered a hat very similar to that one and got a lot of loops in the thread. The hat was bouncing a lot, no matter how I hooped it. 😫😫 What can I do to eliminate that bounce?

    • @ricomatv
      @ricomatv  5 лет назад

      Hey there here is a video that might help. ruclips.net/video/nl9UTNJwxLk/видео.html

  • @gisellechaput5892
    @gisellechaput5892 4 года назад

    How do you embroider a logo on the side of the cap?

    • @ricomatv
      @ricomatv  4 года назад

      Hi there check out this video tutorial: ruclips.net/video/CdqfSZQ8QLc/видео.html&t

  • @madelinescreations7718
    @madelinescreations7718 3 года назад

    I like that it’s off center

    • @ricomatv
      @ricomatv  3 года назад

      Thanks so do we!

  • @dannythemusiciancrafter3280
    @dannythemusiciancrafter3280 5 лет назад +2

    Hi. I think is important to know your parameters on the machine, The exact width and height size of your actual design, and if you move it down with your machine arrows. 😁 thanks.

  • @AlbertoRodriguez-zx4mb
    @AlbertoRodriguez-zx4mb 5 лет назад

    Could you embroidery a 3D cap design on this EM1010 machine?

    • @ricomatv
      @ricomatv  5 лет назад

      Yes you can.

    • @AlbertoRodriguez-zx4mb
      @AlbertoRodriguez-zx4mb 5 лет назад

      Thank you. Could you teach us how to set up the high of the preset foot for 2mm or 3mm foam to be used in a 3D design for Caps on the EM1010. I think this machine is an excellent product for a business.
      Excellent videos, and they are an excellent resource for learning and understanding about Ricoma and the embroidery machines.

  • @cesarpulido4184
    @cesarpulido4184 4 года назад

    Can you embroider any type of hats in the EM-1010??

  • @kimberlyarmstrong2929
    @kimberlyarmstrong2929 5 лет назад +1

    My machine isn't due for another 9 days ago, but I have been watching your videos. Very helpful. Thank you. The only suggestion I have is please lose the background music.

  • @katherovenstine4336
    @katherovenstine4336 4 года назад

    Why does my hat brim hit my machine?

    • @heyyou4089
      @heyyou4089 4 года назад

      I’m having the same issue 😢

    • @ricomatv
      @ricomatv  4 года назад

      Hi there, contact our tech support and they will walk you through how to avoid this: ricoma.com/us/tech-support

  • @mandystephens6656
    @mandystephens6656 4 года назад

    The background music is way to loud. It makes it hard to HEAR YOU.

    • @ricomatv
      @ricomatv  4 года назад

      Thank you for the feedback!

  • @loralyewinkes2049
    @loralyewinkes2049 5 лет назад +1

    could really do without the background music..............otherwise I have learned alot thank you

  • @theresas.439
    @theresas.439 5 лет назад

    Please discard the monotonous music

  • @casadelleon8058
    @casadelleon8058 3 года назад

    How would I go about centering a design ? My design keeps going to the side and not center

    • @ricomatv
      @ricomatv  3 года назад +1

      Hi there, thanks so much for watching. try reselecting your hoop from the design set menu. This should recenter your design automatically. Hope this helps! We also suggest joining our Facebook support group: Embroidery and Custom Apparel Mastery. Here you can post your creations, ask questions and learn from your peers. We hope you join us! facebook.com/groups/embroiderymastery