Thank you, thank you for this video!! I’ve had my BES4 and scan and cut for three years and could never figure out out to use them together and make a fcm file. You are a blessing!!
i have bes 4 i wish i had ask earlier how to use it instead of simply appliquei really wanted to do the sew along i have been in fla. and just got back to my home in the north will try to follow along with you and get what i can out of it thank you corrine
I purchased the Embrilliance software and I love it. I am just getting back into embroidery after some time away. Having fun relearning plus learning all the new stuff. Thank you for your help. Your videos are great.
little more info haha = i just purchased my stellaire and scan/cut - i'm following along with you on this project but don't have an embroidery software package so i'm stuck here at this point...
If you can do this in PE Design, please let me know how or where you found it in the user manual. I downloaded the user manual and can't find it in any version of PE Design. I see it in the BES manual and Simply Applique is a module of the BES(n) software.
Becky, in her book, "Piece in the Hoop," Larissa Bland uses a heat proof pressing mat, and fusible stabilizer. (She is making quilt blocks, not applique.) She slips the mat under her hoop and presses the pieces down with a little iron, so she does not have to take the hoop out to press. You could probably do that as well with applique. Then you have to remember to remove the mat before you stitch again. I have tried this with great success. Thanks for the great video.
That's a great tip! Thank you! Funny, I have this book, read it years ago, and completely forgot about it. I have even made that little pressing mat. Can't tell you HOW MANY TIMES I've sewn it to my project. LOL :)
Hi Becky,Thank you Thank you!!!!! for that you tube,love it.I learnt a lot on your two videos,Thank you again. hope you do more on Simply Applique.Love the programme. Hope you are taking care of yourself with this Covid19.We are doing ok over here in Australia. Regards Caroline(Australia)
Thank you Becky I got it! You made it doable and fun! One question is there a way to take off the stitches on the top of the stem that the petals over lap Thanks again for another awesome video class
Do you have a suggestion of how to save all my embroidery designs on my computer? I have them in different USBs and I just need to organize. I love your tutorials. I work at a cemetery and sometimes its pretty quiet and when it is I replay your videos. You are so fun! Thanks
Could you reorganize the stitches in simply appliqué so that all the placement stitches stitch first and make them all the same color so the machine stops on its own after they are all done. Then you can take the hoop to iron? I could do this in PE design just wondering if simply appliqué is that robust. Thanks Becky you are a great instructor
Power Tools with Thread my software is over ten years old and I’m thinking about gettin new software. I used to digitize but it’s way too much work. Now I really want to tweak and use the SnC which by the way is still in the box (almost a year) because I have a Mac. I finally broke down and got a new laptop with Microsoft. I am not a fan of MS but most software only works with windows. Now I need to decide which software I will need buy that will work with all my tools. I certainly get a lot of inspiration from you....keep inspiring Becky
Hi Becky! I am learning so much from your videos. I have started at the first one and working my way through them. I have a Dream machine, ScanNCut, and I bought Simply Applique after watching your videos. Do you ever use the lettering in Simply Applique?
I'm new to Scan & Cut and Simply Applique. When you don't want the tackdown line to show beneath the blanket stitch, do you delete the tack-down offset or just skip that step?
😭😭😭😭 I’ve watched several videos and I have my SVG file converted it to fcm in brother creative cloud uploaded it in simply appliqué to make it an appliqué design but it’s not working
Power Tools with Thread yeh Thankyou I didn’t call (time difference and everything) I could have bought it through them but the $ exchange rate was too high. So hoping it might be cheaper if it was a available in Australia
I don't think so. Brother added this technology in the Luminaire but from what I can tell from the user manual for the Dream, the ability to create applique from a scanned image wasn't/isn't available.
Thank you, thank you for this video!! I’ve had my BES4 and scan and cut for three years and could never figure out out to use them together and make a fcm file. You are a blessing!!
Your flower turned out so cute! You are such a great teacher. Like your PTWT mug I noticed on your table. See you next time.
i have bes 4 i wish i had ask earlier how to use it instead of simply appliquei really wanted to do the sew along
i have been in fla. and just got back to my home in the north will try to follow along with you and get what i can out of it thank you corrine
I purchased the Embrilliance software and I love it. I am just getting back into embroidery after some time away. Having fun relearning plus learning all the new stuff. Thank you for your help. Your videos are great.
The flower turned out adorbs!
Thank you! Finally I will attempt to do this. Your an excellent teacher! I have scan and cut 350 and a LB7000.
OMGosh, that's exactly what I have too.
little more info haha = i just purchased my stellaire and scan/cut - i'm following along with you on this project but don't have an embroidery software package so i'm stuck here at this point...
Simply Applique is what you need! www.allbrands.com/products/65662-brother-sabessadl-simply-applique-creative-embroid
Thanks, you answered several of my questions in this video. I am looking forward to your way machine applique
Great job. Going to have a go at doing this using my CM900, PE Design Next and my Innovis V5, fingers crossed, thanks for the great tutorials !
If you can do this in PE Design, please let me know how or where you found it in the user manual. I downloaded the user manual and can't find it in any version of PE Design. I see it in the BES manual and Simply Applique is a module of the BES(n) software.
Thank you so much for the tutorial! I've been searching for this type of software for a while. I can't wait to start playing with it.
Lots of work and a few minutes to embroider
Becky, in her book, "Piece in the Hoop," Larissa Bland uses a heat proof pressing mat, and fusible stabilizer. (She is making quilt blocks, not applique.) She slips the mat under her hoop and presses the pieces down with a little iron, so she does not have to take the hoop out to press. You could probably do that as well with applique. Then you have to remember to remove the mat before you stitch again. I have tried this with great success. Thanks for the great video.
That's a great tip! Thank you! Funny, I have this book, read it years ago, and completely forgot about it. I have even made that little pressing mat. Can't tell you HOW MANY TIMES I've sewn it to my project. LOL :)
@@PowerToolsWithThread I have sewn it to my project as well! LOL
Hi Becky,Thank you Thank you!!!!! for that you tube,love it.I learnt a lot on your two videos,Thank you again.
hope you do more on Simply Applique.Love the programme.
Hope you are taking care of yourself with this Covid19.We are doing ok over here in Australia.
Regards
Caroline(Australia)
Fun video packed with lots of information.
Thank you! Excellent instructions!
Thank you Becky I got it! You made it doable and fun! One question is there a way to take off the stitches on the top of the stem that the petals over lap Thanks again for another awesome video class
Do you have a suggestion of how to save all my embroidery designs on my computer? I have them in different USBs and I just need to organize. I love your tutorials. I work at a cemetery and sometimes its pretty quiet and when it is I replay your videos. You are so fun! Thanks
You chose version 10 for your save for the embroidery. How do you know which version to choose. Thanks again for all you help and information.
I always choose the most recent version. New versions can usually read down, but older versions can't read up.
Could you reorganize the stitches in simply appliqué so that all the placement stitches stitch first and make them all the same color so the machine stops on its own after they are all done. Then you can take the hoop to iron? I could do this in PE design just wondering if simply appliqué is that robust. Thanks Becky you are a great instructor
I've tried and not had much luck. It might work inside BES4, but it doesn't work well on its own.
Power Tools with Thread my software is over ten years old and I’m thinking about gettin new software. I used to digitize but it’s way too much work. Now I really want to tweak and use the SnC which by the way is still in the box (almost a year) because I have a Mac. I finally broke down and got a new laptop with Microsoft. I am not a fan of MS but most software only works with windows. Now I need to decide which software I will need buy that will work with all my tools. I certainly get a lot of inspiration from you....keep inspiring Becky
How would I add the smiley face to the appliqué from the coloring page?
Omg...lots to learn
you give good instructions thank you
If I wanted to keep the stitching satin, is there a way to remove the underlying satin stitch from the stem?
You have to make each piece an embroidery design and then merge them.
So excited my sdx2200d has arrived today. Thanks in advance for your help . Keep safe , take care xx
This is great info.
Thank you!
Thank you for sharing ❤️💗
Hi Becky! I am learning so much from your videos. I have started at the first one and working my way through them. I have a Dream machine, ScanNCut, and I bought Simply Applique after watching your videos. Do you ever use the lettering in Simply Applique?
I haven't used the lettering yet. I need to!
I'm new to Scan & Cut and Simply Applique. When you don't want the tackdown line to show beneath the blanket stitch, do you delete the tack-down offset or just skip that step?
You can skip over it at the machine.😊
thanks for the helpful video! I'm new to all of this. why did you pull your file into Embrilliance? thanks!
Just to send it wirelessly to the Luminaire.
i sure could use a private lesson
so i'm a little confused - do i need the BS4 or the Simply applique software for projects
Either one will work. You do not need both. www.allbrands.com/products/65662-brother-sabessadl-simply-applique-creative-embroid
That was great thank-you so much
😭😭😭😭 I’ve watched several videos and I have my SVG file converted it to fcm in brother creative cloud uploaded it in simply appliqué to make it an appliqué design but it’s not working
how do you download from usp stick to brother canvas workspace?
I would love this simply appliqué program but it’s not yet available here in Australia. Anybody know when it will be be available here.
If you call Allbrands, they can sell you the license key for a download, no shopping or import taxes. Ask for Barbara.
Power Tools with Thread yeh Thankyou I didn’t call (time difference and everything) I could have bought it through them but the $ exchange rate was too high. So hoping it might be cheaper if it was a available in Australia
I have a brothers dream machine, it has a built in scanning capability. Would I be able to do this through my machine?
I don't think so. Brother added this technology in the Luminaire but from what I can tell from the user manual for the Dream, the ability to create applique from a scanned image wasn't/isn't available.
Love your PTWT mug!! Selling these too??
A friend made that for me. But I should get some for the site!
@@PowerToolsWithThread YES!!! That would be great. I wear my shirt everywhere!
You do such an excellent job instructions! Thank you!
What is the difference between PES v10 and the other Brother options listed?
Honestly, I'm not sure. Possibly software versions for different machines.
will this be on you tube or face book and at what time
It will be throughout the week of July 6-10 on RUclips. You can watch at your leisure.
What embroidery machine is that ?
That's my old Brother Quattro 6000D. A Craig's List find from years ago.
BTW...you have a troll in your comments.
Thanks. I see that right away on the laptop but not on the phone. Appreciate the heads up. All gone now.