I've had this problem for years and always wondered why I had this problem with hot and cold water in bath's and sinks. Job for the weekend now is fitting NRV's to the taps. Thanks for this great video.
Enjoying your videos! Thanks for your channel. When you drew the plumbing schematics, the symbol for the one-way valve is the same as that for a diode in electronics. That reminded me of the many similarities between plumbing and electronic theory. Good show! Roy Lewis. Buffalo, NY USA
Showers with poor hot and strong cold pressure. I saw this video B4. Got to my sister's house and had a nightmare controlling shower. Thought hang on... I've seen summat. RUclips a refresh and boom. The video was even better 2nd time round! That's the shower sorted
Cats are cool. I have a tabby (Harry), and as long as you remember that he is in charge and owns the neighbourhood - then everything will be fine and dandy. Oh, and also remember - dogs have owners, cats have staff. Remember these things and your cat may just let you smooth him. LOL! Thanks for another great vid.
dig the way ya break it down simple every time..love the cat.like the way they spazz out randomly for no apparent reason...clawing and bouncing off stuff!
im finishing my 6129lvl2 in october hopeing to do my lv3 and gas after christmas your vidz r mint and make the plumbing world worth while keep up the gd vids m8
Thank you, I wasn't clear how these worked and how it would benefit my home. Now I understand how they work I can confidently specify a non return valve in every hot supply pipe where a mixer tap or shower mixer occurs. PS I'm allergic to Cats.
Another great demonstration, and very entertaining. Next time you put one of these in a plastic pipe, I'd like to see that done. By the way, Most of the water heaters in my homes are under mains pressure, so pressure should be equal on both sides. Evidently that isn't the case everywhere. Why?
I changed a mains cold water electric shower to an inbuilt power shower using cold water tank and hot water cylinder ( with surrey flange ). Due to location of bathroom / hot water tank the only practical route was across the loft space from the tanks. The prob is that after a few days, the hot water pipe starts to contain air ,and the pump spins dry intermittently until it grabs a steady supply of hot water. and then its's ok for a few days.
Very interesting as usual. Many thanks for the video. I have a non return valve fitted outside on the pipe leading to my outdoor tap. Throughout the cold months (which seems like far more than the warm ones!) I turn off the ball valve on the inside as I should to prevent very unwanted burst pipes outside. I turned the valve on for the first time in 3 or 4 months and all I got was a trickle from the outdoor tap! It can't be the valve that's the issue as that turns easily. Is it possible that the non return valve has seized? Is that possible? If so, do I have to replace it... OR is there a simpler solution?
Thanks that has explained why my rental property has these in the washbasin supply pipes to the mixer tap and why they are not needed for separate taps. I do get some vibration though if the hot tap is open only a small amount. Is this the non return valve open/closing?
HI, My mate was saying about fitting these to the mains feed to his washing machine, to stop any grotty water sitting in the pipe circulating back along and into the sink taps as its drinking water. However wouldn't mains pressure prevent this from happening in the first place?
Good video, thanks. Can you advise me before I 'LOSE IT?' Moved my Auto mixer tape from my Appartment to my house, never had a problem until I did that, water started to exit the over flow, advised by a plumber to fix these, just done so now only hot water coming out & that is at a reduced rate! The arrows are facing the take on both pipes. Seems like I can't win, this is winding me up so much. Thanks
Im thinking of using a non-return valve on the hot for mixing solar hot water into a cold feed only washing machine. Is this smart? Will use valves to set the temperature to 30*C.
Hi James Videos excellent keep them coming. A quick question , why did you not use a paste with the compression fittings? I have noticed in the past you sometimes used ptfe and others a paste ? Just wondering thanks Mark
Hi hope you can help... I have a mixer tap in the kitchen, bathroom and a thermostatic shower and bath tap, will fitting one double check / non return valve on the hot water out of the boiler be serficiant to stop the cold back feeding on the whole hot water side of the system?
Hi mate me again.Good idea never thought popping out now to get one cheers great job keep the good work up hope the wife doesn't mind you taking her home apart, take mate thanks !.
Non return valves fitted on inlet hoses of appliances (dishwasher/washing machines etc) is a great idea and can prevent unpleasant, yet harmless, taste and odours occurring at drinking water taps. Chlorine in mains fed water can react with phenols that are present in some rubbers and plastic fittings (appliance hoses, flexi tap tails, phenolic rubber tap washers). The reaction produces trichlorophenol, more commonly known as TCP. A very distinct taste/odour, which unlike chlorine, will persist even in boiled water and is still detectable in tea and coffee. It's harmless, but who wants top in their tea? Fitting NRVs to appliance hoses is a great step to help reduce such tastes/odours. Note, most appliances will have some backlogs device within the appliance itself, but it's good practice to install on the mains feed side of the inlet appliance hose to tackle the affects of water sitting in the hose itself. Great vid re hot/cold imbalance. I think difference between single and double check valves is that a single check valve contains just one sprung loaded valve. A double check valve has two individual sprung loaded valves, sometimes with a test port between the two.
Basically have a job which has gravity system and a grundfos 2bar pump running 2 showers. Keep getting airlock in the system and when the hot tap in the kitchen is opened the pump kicks in and the pumps squeals because of the air in the system. I have been advised by grundfos to fit 2 low pressure non return valves on the outlets from the pump to solve this problem. Does this sound correct to you?
Does a Non Return Valve always go after an Isolator valve? or can you fit an Isolator after the NRV? I suppose if you ever have to replace the NRV you can atleast isolate it locally.
Hi Mate, thank you for your video very nice work, just one question; on some valves I've seen a hex screw in the middle and wondered what it was for, could it be to allow a small amount back? would appreciate your answer, thanks
I want to put a Salamanda home boost coz my shower pressure poor and mains pressure the cause. I was told I can install it on my cold water feed to my combi bit would need to install non return valves on all other sources using the cold water before it gets to the combi. But not sure where to position them. Any advice on this? Thanks
I'm wondering if I should put one of these below my toilet. When my washing machine suddenly uses the water inlet or I use the sink next to it, my toilet inlet seems to have back pressure, as it makes the shut off valve suddenly start trickling water though and it is no longer shut off.
Hi mate could you please advise me on this issue... I have thames water supply and i was going to close my main valve which is located outside but I saw a small white stick and inside the whole of the stick there was a screw, nothing to rotate like I have seen in many videos... Could you please advise me if i have to rotate that screw or it's something else ???
Will these work for air ?. I have a large water tank in my van , fitted with a immersion to heat it up in winter to stop it all freezing (window cleaner ). The tank has a breather on the lid that I’ve fitted ,it’s 3/4” . I wondered if I could use one of these to allow air into the tank (tank should suck when water is draining ) whilst I’m using the water so it doesn’t air lock but stop the evaporation leaking out of the tank and turning the van into a sauna in a morning . Any advice is welcome
Can you advise me having finished soldering my pipes if one is not satisfied can you go back and reheat and run the solder round once more.Reason I feel I may not have heated the pipes enough as I have had pipes leak years ago scrapped them no problem . Need more practice I think ! thanks bob.
REALLY helpful tips. many thanks. we recently had our kitchen remodeled and the kitchen fitter really did not have a clue about plumbing! Is it a legal requirement to have a non return valve on the pipework leading to an outside tap? ALSO....is it legal to use lead solder on domestic pipework leading to a kitchen sink tap? cheers marc
Great video I am fitting a bath mixer and having trouble. The mixer has no fittings supplied so I put loads of ptfe on a 15mm compression elbow. It works but was weeping. I removed elbow and fitted a straight 15mm service valve. I thought it was because the thread was not long enough so I tried male straight connectors and it still weeps? Is there any other fittings to use?
I've got a check valve on my hot water bath tap from the check valve to the tap connector is a push fit connection water is leaking out of the push fit connector??? Any idea how to connect the check valve to the tap connector so eliminating the push fit problem?
Nice clear vid. I have a 15 mm double check valve on the hot and cold lines to my mixer tap. There is a screwdriver slot on the side of the valve that I thought may be for isolating the tap. After I got a bit wet I found that it is not for isolation, it just appears to cap a hole in the side of the valve. Can you tell me what it is for?
I installed a non return valve last year on a outside tap and it was working fine. I needed to use the tap just now and I have no water coming out of the tap. I've opened the little nut in the middle of the valve and water came out. The valve is the correct way. Is this normal?
Hi - good vid - I installed a non return valve as you described and the pressure on the kitchen mixer tap ( very thin pipe ) dropped to a silly level - some times the water takes seconds to even start flowing. - is the non return valve faulty, adjustable or are some taps just bad ?. Th flow in the bathroom sink is good at the same level with a 3-4 metre head. I am good at most DIY but stumped by this - do I change the tap, try another valve or just tell the wife thats as good as it gets ?!!
Hi plumber parts, I've got a overflow pipe leaking which is in the loft next to the other tank. It's the hot water tank. I've got a condensing boiler/system boiler. It's only 4 years old. Its not the floater in the tank and I've had that checked and it's working fine but it's still overflowing and water coming back up the system. We have a mixer tap in the kitchen that as already there. We've just had the bathroom done and there was 2 seperate taps on a sink and swapped with a mixer tap. Could this be why my overflow tank is leaking and would these none return valves stop this issue?
Fab! Can an instantaneous electric hot water heater outlet be fed into an existing hot pipe coming from an electric immersion tank with one of these valves to stop the water from the immersion tank flowing backwards through the instantaneous water heater? I want to shut off the immersion tank feed and supply my basin and mixer-tap shower in the bathroom mostly with the instantaneous heater, but I also want the option of putting the immersion tank back on when I'm really stinky and fancy a bath (There's a big shiny red tap on the pipe from the immersion tank, so it'd be easy to use that to switch between bath mode and shower mode) ..If what I've just written there makes sense.. Good luck deciphering it!
Good videos. I have a non-return valve on the boiler filling loop (Sime 80E). Can I simply disconnect the loop from the valve or will water pour out. It does not seem possible to turn off the non return valve
No worries dooooode! Sub here please➡️👉 ruclips.net/user/plumberparts 👈⬅️If you haven't already! PLEASE FOLLOW US ON TWITTER! WE'RE TRYING TO GET MORE FOLLOWERS! 🐤👉 twitter.com/plumberparts 👈🐤
Can u please suggest something for my new washing machine which is not taking in water seems as though water at the wall outlet is not coming through what could be wrong plz help,
Hi. I have a NRV fitted on my system. It's in 22mm and I noticed it has a test point on it. What is this 'point used to actually test, and how would you go about it? Cheers.
Hi this is a question regarding one of your other videos I am a complete beginner I want to fit a shower but the hot water pressure is non existent I'd seen on your other Video about using a pump my question is can I use a twin pump but block of one end as I only need the hot water may be a stupid question but I am a complete beginner? Cheers Dave.
great video.i installed a new mixer tap in then kitchen and i could work out why water was pouring out the over flow on the roof.it seems cold water was being pumped into hot water system.i need to fit a none return valve.thanks
Hi there, I fitted a unvented boiler to my system plus new bath and bathroom sink. The only way I can get hot water at the sink mixer tap is when I turn the bath tap on. When I switch off the bath tap the water runs cold in the sink. Question is do I fit a nonreturnable valve in the hot water side of the sink.
Thanks for the video. I just bought a new expensive tap like this one, thinking the old one was just a cheapo thing because it made horrible noises when opening the cold (which runs off the mains). Turns out it isn't the tap that's at fault as the new one does it. Will a non-return valve sort out this horrible noise? It also runs on a bit after I turn off to empty itself. Thanks
There's plastic but hot water will not damage it. Sub here please➡️👉 ruclips.net/user/plumberparts ➡️👉FOLLOW US ON TWITTER! TRYING TO GET MORE FOLLOWERS! 🐤👉 twitter.com/plumberparts 👈🐤
Hi there and thank you for your very informative video. My problem is the following: I knew I had to fit a non-return valve to the hot water feed to prevent backflow. Unfortunately, like in your video, the water pressure of the mains far exceed the one from the hot water (Tank in the loft) which prevents a good regulation for the temperature. Do you have any suggestions? I have already changed the cartridges for kitchen taps thinking that it was the problem but no luck. Would a dual flow tap solve the problem? I understand that with these taps the mixing of the water happens in the spout. I greatly appreciate any help or suggestions.
Can you install a non return valve for salamander pump pipework, shower works but after a minute when used a while ago? Presuming that the water from the shower head is running back when turned off.
No mate, they are different. A check valve has been tested to provide back flow, a non return valve hasn't. A non return valve is usually installed on the outlet of a pump. Check valves greater than 50mm can only be installed in the horizontal orientation.
Hi, I live in a townhouse and we recently installed individual meters to all 50 units. We have existing pressure valves (25) now we are being told that we need 25 more pressure valves installed near the geysers because if the geysers blow the insurance wont cover these..we since removed the sensor meters until we get more information to reinstall them. Can you advise on this please..
Hi buddy i have a redring expressions 500s shower its has stoped getting hot the other day but copper tank inside stays hot overload light dose not kicking but it just runs slightly warm to touch but still cold what could the problem be
*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts
Plus, follow my *Vlog “TimesWithJames”:* ruclips.net/user/timeswithjames
Thanks for that. Helped me work out what was going on. Great presentation. Cheers from Australia.
That is so helpful! Your little video has answered so many questions.
I've had this problem for years and always wondered why I had this problem with hot and cold water in bath's and sinks. Job for the weekend now is fitting NRV's to the taps. Thanks for this great video.
Enjoying your videos! Thanks for your channel.
When you drew the plumbing schematics, the symbol for the one-way valve is the same as that for a diode in electronics. That reminded me of the many similarities between plumbing and electronic theory.
Good show!
Roy Lewis. Buffalo, NY USA
Showers with poor hot and strong cold pressure. I saw this video B4. Got to my sister's house and had a nightmare controlling shower. Thought hang on... I've seen summat. RUclips a refresh and boom. The video was even better 2nd time round! That's the shower sorted
Cats are cool. I have a tabby (Harry), and as long as you remember that he is in charge and owns the neighbourhood - then everything will be fine and dandy. Oh, and also remember - dogs have owners, cats have staff. Remember these things and your cat may just let you smooth him. LOL! Thanks for another great vid.
very clear and most helpful with a small injection of humor brilliant. Mark
lionel hodges No problem! PP!
dig the way ya break it down simple every time..love the cat.like the way they spazz out randomly for no apparent reason...clawing and bouncing off stuff!
im finishing my 6129lvl2 in october hopeing to do my lv3 and gas after christmas your vidz r mint and make the plumbing world worth while keep up the gd vids m8
Wow this is a well presented and helpful video. Thank you for generous and free help.
Nice and clear mate, thanks
Beautiful keep up the good work
Thank you, I wasn't clear how these worked and how it would benefit my home. Now I understand how they work I can confidently specify a non return valve in every hot supply pipe where a mixer tap or shower mixer occurs. PS I'm allergic to Cats.
Excellent video. Thank you!
Best teacher ever!
Cheers dude!
Sub here please>> ruclips.net/user/plumberparts
Another great demonstration, and very entertaining. Next time you put one of these in a plastic pipe, I'd like to see that done. By the way, Most of the water heaters in my homes are under mains pressure, so pressure should be equal on both sides. Evidently that isn't the case everywhere. Why?
Thank you 🙏🏾
Hi, is the check volve only for hot water or for both hot and cold water...?
Would you use that for an outdoor tap and Infront of a toilet cistern
Nice one bro...George is ace! 😀👍
Good.. nice explanation
I shall thank you for your video... Actually, you made me plan to fix a returning water issue in one of my customer's shower pump...
Welldone Broth...
I changed a mains cold water electric shower to an inbuilt power shower using cold water tank and hot water cylinder ( with surrey flange ). Due to location of bathroom / hot water tank the only practical route was across the loft space from the tanks. The prob is that after a few days, the hot water pipe starts to contain air ,and the pump spins dry intermittently until it grabs a steady supply of hot water. and then its's ok for a few days.
Good instructive video, thanks.
Very interesting as usual. Many thanks for the video.
I have a non return valve fitted outside on the pipe leading to my outdoor tap. Throughout the cold months (which seems like far more than the warm ones!) I turn off the ball valve on the inside as I should to prevent very unwanted burst pipes outside. I turned the valve on for the first time in 3 or 4 months and all I got was a trickle from the outdoor tap! It can't be the valve that's the issue as that turns easily. Is it possible that the non return valve has seized? Is that possible? If so, do I have to replace it... OR is there a simpler solution?
Wonderful, you are a great teacher. Learning so much.
Great videos ! so easy to understand. Will look to your videos for future guidance .
Cheers brad! Glad to help mate! SUBSCRIBE! ➡️👉 ruclips.net/user/plumberparts 👈⬅️ IF YOU HAVEN'T ALREADY! 😎
Reply ·
does a toilet water feed need a double check valve installing?
Thanks that has explained why my rental property has these in the washbasin supply pipes to the mixer tap and why they are not needed for separate taps. I do get some vibration though if the hot tap is open only a small amount. Is this the non return valve open/closing?
HI,
My mate was saying about fitting these to the mains feed to his washing machine, to stop any grotty water sitting in the pipe circulating back along and into the sink taps as its drinking water.
However wouldn't mains pressure prevent this from happening in the first place?
Good video, thanks. Can you advise me before I 'LOSE IT?'
Moved my Auto mixer tape from my Appartment to my house, never had a problem until I did that, water started to exit the over flow, advised by a plumber to fix these, just done so now only hot water coming out & that is at a reduced rate! The arrows are facing the take on both pipes. Seems like I can't win, this is winding me up so much.
Thanks
Hi mate .. I have a problem with a mixer tap spluttering on HW side .. it has a non return valve fitted
Many thanks for your help
Im thinking of using a non-return valve on the hot for mixing solar hot water into a cold feed only washing machine. Is this smart? Will use valves to set the temperature to 30*C.
learnt a lot from you I did plumbing long time ago trying to get back into it
no worries dude, good luck!
Thanks, very informative video.
Hi James
Videos excellent keep them coming.
A quick question , why did you not use a paste with the compression fittings?
I have noticed in the past you sometimes used ptfe and others a paste ? Just wondering thanks
Mark
Do I need a NRV on a cistern? Are there isolation valves with built in NRV?
You are just awesome. No other words.
Ha many thanks!
Hi hope you can help... I have a mixer tap in the kitchen, bathroom and a thermostatic shower and bath tap, will fitting one double check / non return valve on the hot water out of the boiler be serficiant to stop the cold back feeding on the whole hot water side of the system?
Hi mate me again.Good idea never thought popping out now to get one cheers great job keep the good work up hope the wife doesn't mind you taking her home apart, take mate thanks !.
Thank u , I used it on a water filter too , I didn’t know it pushed up into hot pipe , thank u very much
Non return valves fitted on inlet hoses of appliances (dishwasher/washing machines etc) is a great idea and can prevent unpleasant, yet harmless, taste and odours occurring at drinking water taps. Chlorine in mains fed water can react with phenols that are present in some rubbers and plastic fittings (appliance hoses, flexi tap tails, phenolic rubber tap washers). The reaction produces trichlorophenol, more commonly known as TCP. A very distinct taste/odour, which unlike chlorine, will persist even in boiled water and is still detectable in tea and coffee. It's harmless, but who wants top in their tea? Fitting NRVs to appliance hoses is a great step to help reduce such tastes/odours. Note, most appliances will have some backlogs device within the appliance itself, but it's good practice to install on the mains feed side of the inlet appliance hose to tackle the affects of water sitting in the hose itself.
Great vid re hot/cold imbalance.
I think difference between single and double check valves is that a single check valve contains just one sprung loaded valve. A double check valve has two individual sprung loaded valves, sometimes with a test port between the two.
Basically have a job which has gravity system and a grundfos 2bar pump running 2 showers. Keep getting airlock in the system and when the hot tap in the kitchen is opened the pump kicks in and the pumps squeals because of the air in the system. I have been advised by grundfos to fit 2 low pressure non return valves on the outlets from the pump to solve this problem. Does this sound correct to you?
Does a Non Return Valve always go after an Isolator valve? or can you fit an Isolator after the NRV? I suppose if you ever have to replace the NRV you can atleast isolate it locally.
Hi Mate, thank you for your video very nice work, just one question; on some valves I've seen a hex screw in the middle and wondered what it was for, could it be to allow a small amount back? would appreciate your answer, thanks
Nice vid. Would you suggest putting a non return valve on a washing machine cold in flow or is it unnecessary?
I want to put a Salamanda home boost coz my shower pressure poor and mains pressure the cause. I was told I can install it on my cold water feed to my combi bit would need to install non return valves on all other sources using the cold water before it gets to the combi. But not sure where to position them. Any advice on this? Thanks
Good video clips! Whats the difference between a single check valve and double check valve? Thanks
Thanks buddy .. clear and to the point
on a macerator ? to prevent smells or backwash to a sink and /or shower running into a macerator ?
I'm wondering if I should put one of these below my toilet. When my washing machine suddenly uses the water inlet or I use the sink next to it, my toilet inlet seems to have back pressure, as it makes the shut off valve suddenly start trickling water though and it is no longer shut off.
HOLLA ,could you do a vid on fitting a shower tray ,cheers
Hi mate could you please advise me on this issue...
I have thames water supply and i was going to close my main valve which is located outside but I saw a small white stick and inside the whole of the stick there was a screw, nothing to rotate like I have seen in many videos...
Could you please advise me if i have to rotate that screw or it's something else ???
Will these work for air ?.
I have a large water tank in my van , fitted with a immersion to heat it up in winter to stop it all freezing (window cleaner ).
The tank has a breather on the lid that I’ve fitted ,it’s 3/4” .
I wondered if I could use one of these to allow air into the tank (tank should suck when water is draining ) whilst I’m using the water so it doesn’t air lock but stop the evaporation leaking out of the tank and turning the van into a sauna in a morning .
Any advice is welcome
Can you advise me having finished soldering my pipes if one is not satisfied can you go back and reheat and run the solder round once more.Reason I feel I may not have heated the pipes enough as I have had pipes leak years ago scrapped them no problem . Need more practice I think ! thanks bob.
Yes Bob you can! SUBSCRIBE! ➡️👉 ruclips.net/user/plumberparts 👈⬅️if you haven't already!
Is it common to have a non return valve on both the cold and hot outlets or only on 1 pipe such as the hot water outlet
REALLY helpful tips. many thanks. we recently had our kitchen remodeled and the kitchen fitter really did not have a clue about plumbing! Is it a legal requirement to have a non return valve on the pipework leading to an outside tap? ALSO....is it legal to use lead solder on domestic pipework leading to a kitchen sink tap?
cheers
marc
Great video I am fitting a bath mixer and having trouble. The mixer has no fittings supplied so I put loads of ptfe on a 15mm compression elbow. It works but was weeping. I removed elbow and fitted a straight 15mm service valve. I thought it was because the thread was not long enough so I tried male straight connectors and it still weeps? Is there any other fittings to use?
Great demonstration. Thank you.
I've got a check valve on my hot water bath tap from the check valve to the tap connector is a push fit connection water is leaking out of the push fit connector??? Any idea how to connect the check valve to the tap connector so eliminating the push fit problem?
As always, great informational vid.
Nice clear vid. I have a 15 mm double check valve on the hot and cold lines to my mixer tap. There is a screwdriver slot on the side of the valve that I thought may be for isolating the tap. After I got a bit wet I found that it is not for isolation, it just appears to cap a hole in the side of the valve. Can you tell me what it is for?
Neil Springate
I installed a non return valve last year on a outside tap and it was working fine. I needed to use the tap just now and I have no water coming out of the tap. I've opened the little nut in the middle of the valve and water came out. The valve is the correct way. Is this normal?
Mate thanks for the great fun vids, you got me hooked.
Hold it tight!
great video, really well explained!
Great video, I really like, when you draw while explaining stuff.
Hi - good vid - I installed a non return valve as you described and the pressure on the kitchen mixer tap ( very thin pipe ) dropped to a silly level - some times the water takes seconds to even start flowing. - is the non return valve faulty, adjustable or are some taps just bad ?. Th flow in the bathroom sink is good at the same level with a 3-4 metre head. I am good at most DIY but stumped by this - do I change the tap, try another valve or just tell the wife thats as good as it gets ?!!
Tell the wife! SUBSCRIBE! ➡️👉 ruclips.net/user/plumberparts 👈⬅️if you haven't already!
good man ,keep up the good work
Good information, thanks
Hi plumber parts,
I've got a overflow pipe leaking which is in the loft next to the other tank. It's the hot water tank. I've got a condensing boiler/system boiler. It's only 4 years old.
Its not the floater in the tank and I've had that checked and it's working fine but it's still overflowing and water coming back up the system. We have a mixer tap in the kitchen that as already there. We've just had the bathroom done and there was 2 seperate taps on a sink and swapped with a mixer tap. Could this be why my overflow tank is leaking and would these none return valves stop this issue?
Would reducing the cold water pressure with a balancing valve achieve the same job?
Fab! Can an instantaneous electric hot water heater outlet be fed into an existing hot pipe coming from an electric immersion tank with one of these valves to stop the water from the immersion tank flowing backwards through the instantaneous water heater? I want to shut off the immersion tank feed and supply my basin and mixer-tap shower in the bathroom mostly with the instantaneous heater, but I also want the option of putting the immersion tank back on when I'm really stinky and fancy a bath (There's a big shiny red tap on the pipe from the immersion tank, so it'd be easy to use that to switch between bath mode and shower mode) ..If what I've just written there makes sense.. Good luck deciphering it!
Plumber like a boss! Great presentation mate. :D Cheers!
Good videos.
I have a non-return valve on the boiler filling loop (Sime 80E). Can I simply disconnect the loop from the valve or will water pour out. It does not seem possible to turn off the non return valve
As always, great video, cheers :)
Can you comment on the pressure loss in these things .
Pressure loss is minimal, as is the flow but only if you're on mains pressure. Good luck! PP!
fair play mate - learned a lot
No worries dooooode!
Sub here please➡️👉 ruclips.net/user/plumberparts 👈⬅️If you haven't already!
PLEASE FOLLOW US ON TWITTER! WE'RE TRYING TO GET MORE FOLLOWERS! 🐤👉 twitter.com/plumberparts 👈🐤
Can u please suggest something for my new washing machine which is not taking in water seems as though water at the wall outlet is not coming through what could be wrong plz help,
Hi. I have a NRV fitted on my system. It's in 22mm and I noticed it has a test point on it. What is this 'point used to actually test, and how would you go about it? Cheers.
All cats are divas.
Great advice about non return valves, will have a go myself as only getting warm water upstairs but hot downstairs.
Jan Davis Good luck!
I'm installing a thermostatic shower and i heard you need to put one on there?
Hi this is a question regarding one of your other videos I am a complete beginner I want to fit a shower but the hot water pressure is non existent I'd seen on your other Video about using a pump my question is can I use a twin pump but block of one end as I only need the hot water may be a stupid question but I am a complete beginner? Cheers Dave.
No, it'll kill the end that's not being used! Sub here please>> ruclips.net/user/plumberparts
Could you not put a pressure regulator into the cold feed to reduce the pressure to match the pressure of the hot feed.?
Good morning, I'm fitting a new stop cock and a non return valve, can I put the valve either side of the stop cock?
Can you add a Non-Return valve to the hot water outlet pipe connected to the boiler, avoiding having to have multiple non-return valves at every tap?
great video.i installed a new mixer tap in then kitchen and i could work out why water was pouring out the over flow on the roof.it seems cold water was being pumped into hot water system.i need to fit a none return valve.thanks
+lesmoor kelly No worries!
Hi there, I fitted a unvented boiler to my system plus new bath and bathroom sink.
The only way I can get hot water at the sink mixer tap is when I turn the bath tap on.
When I switch off the bath tap the water runs cold in the sink.
Question is do I fit a nonreturnable valve in the hot water side of the sink.
Thanks for the video. I just bought a new expensive tap like this one, thinking the old one was just a cheapo thing because it made horrible noises when opening the cold (which runs off the mains). Turns out it isn't the tap that's at fault as the new one does it. Will a non-return valve sort out this horrible noise? It also runs on a bit after I turn off to empty itself.
Thanks
Is there any 'plastic' parts inside the NRV that hot water will damage? or are there special hot water NRV? Thanks.
There's plastic but hot water will not damage it. Sub here please➡️👉 ruclips.net/user/plumberparts ➡️👉FOLLOW US ON TWITTER! TRYING TO GET MORE FOLLOWERS! 🐤👉 twitter.com/plumberparts 👈🐤
Hi there and thank you for your very informative video. My problem is the following: I knew I had to fit a non-return valve to the hot water feed to prevent backflow. Unfortunately, like in your video, the water pressure of the mains far exceed the one from the hot water (Tank in the loft) which prevents a good regulation for the temperature. Do you have any suggestions? I have already changed the cartridges for kitchen taps thinking that it was the problem but no luck. Would a dual flow tap solve the problem? I understand that with these taps the mixing of the water happens in the spout. I greatly appreciate any help or suggestions.
I meant that single flow taps mix the water in the spout not dual flow
Shoulld a NRV be fitted on appliance waste pipes to stop backflow of dirty water?
Can you install a non return valve for salamander pump pipework, shower works but after a minute when used a while ago? Presuming that the water from the shower head is running back when turned off.
Would the pressure from the cold stop the hot water from coming out the tap even with the valve fitted
Bra! Check Valve and Non Return Valve the same thing?
No mate, they are different. A check valve has been tested to provide back flow, a non return valve hasn't. A non return valve is usually installed on the outlet of a pump. Check valves greater than 50mm can only be installed in the horizontal orientation.
George needs a CAT valve installed. Great video mate.
Hi, I live in a townhouse and we recently installed individual meters to all 50 units. We have existing pressure valves (25) now we are being told that we need 25 more pressure valves installed near the geysers because if the geysers blow the insurance wont cover these..we since removed the sensor meters until we get more information to reinstall them. Can you advise on this please..
Hi buddy i have a redring expressions 500s shower its has stoped getting hot the other day but copper tank inside stays hot overload light dose not kicking but it just runs slightly warm to touch but still cold what could the problem be
Would a 22mm non rtn valve in the vertical drop to HW tank stop this ?
Is George a marbled Bengal?