HERE IS THE 1 MILLION ADVICE: You FIRST must connect the Smartphone with the Xiaomi Mi Home App in order to run the Downgrade. (Because the Scooter must TRUST via BLUETOOTH the device that is going flash the firmware, and it happen when you add it to the Mi Home App. I Discovered that after frustrated tries with return message "Sent Retry" errors and NO auto disconnect after try using the m365 DownG, then after add to Mi Home IT WORKED ! So good luck for everyone with more torch and more speed !
worked for me. anyone having issues with the scooter locking/failing.. to unlock it.. just connect it to ninebot scooter app and press unlock. One thing i noticed, if i set it to 34/35km/h.. the tool app doesnt register that its going up to 34/35km/h.. it caps at 18km/h.. which its definitely not doing 18km/h
Try first to upgradr using the mi home app ( i have a tutorial also on how to do this , feel free to browse my videos) then after upgrading to 1.6.6 using mi home app try to follow my steps here again
Thanks to people like you putting in this kind of effort bringing u tube and hackers together we would be stuck without solutions thank you for your excellent tutorial I have subscribed and wish you many more subscribers.
For a m365 pro, mine is currently 1.6.0 firmware BLE 110, so firstly downgrade to BLE90. Then which is the correct preset to create the custom firmware? For a M365 pro should I use GONKA or GONKAD?
do you know wich is the correct BLE version for the m365 pro ? cause in the index link I found hackm365.com/x/BLE/ however it shows 2 different versions BLE090.zip and BLE090_PRO.zip
Hi, I have the latest soft in 1s BMS: V 1.4.1 BLE 1.3.6 ESC 3.1.6 How can I go back to the software of the previous 2.2.1 because the scooter then accelerated faster was more lively, and with the latest updated software it is really slow, now when I want to go back to the previous version of vanilla 2.2.1 it all loads but the speed is in D or S mode is the same, i.e. 20, previously in D mode it was 20 and in S mode it was 25: /
Thank you so much. I couldn't get my V1.6 to accept a flash because of the stupid BLE. this is the first guide that has shown how to Downgrade that. Now i can motor along at 30kph :D you're a superstar.
With this instruction I bricked my motherboard on m365pro 2019 version 1.6.8 now I need to pay for service. That doesn't mean this instruction is bad, but ,for my motherboard and new files from proposed website it was. So it's risky and I'm not stupid, I know electronic, Arduino programming and I work in IT sector. Be aware, if you decide to hack, then expect major risk and possible cost. Unfortunately I don't have "ST LINK" at the moment to try to unbrick it.
it's not working for me. Perhaps they changed something in the firmware generator website. I can edit the cruise control time but the speed just stays locked at 28. On 365 pro ble90 1.5.5
I have an m365 with pro dashboard upgrade and have installed GONKAD365 on it. My scooter won't go above 18 mph even freewheeling at full charge. I have BMS126 and BLE90. Any ideas what might be wrong?
I don't understand, in the video you are using a .zip file for the BLE Downgrade and in the description you putted a .bin file, which one of them do I need to use? Bin or zip?
Hi, I flashed the BLE 090 and It end with success, but when I check it's again the previous version. Any solution? When the process ended the display blinked red two times and After that all normal
Wish this worked for the hiboy max or inceptor hoverboard scooter or ES or even KUGOO so many clones but cant figure out how 5o remove the govenor and it's annoying ad it throws me off once hits 31... I need at least 40 or it's not very thrilling or therapeutic which is why ingot it.. dang... I'm gonna take the whole damn scooter apart bah
what doues "Sport max phase current" and "Sport max battery current" mean? Whats maximum? i want full throlle in sport mode and in the other modes just range
if you want with no speed limit check the last option saying "Enable built-in current-driving throttle algorithm" but be careful on burning your motor.
@@pamming20youtube14 But then I have no speed limit in all 3 modes right? Would only like it in sport mode if the police come, in Germany only 20 km/h are allowed ^^ I thought this is this "Russian algorythm" but for the pro board
@@pamming20youtube14 its the same as before, the dashboard shows 29/30 kmh but when i drive it i just reach 26 kmh(after 5 minutes just 24) the battery cells are okay, and max voltage is 41,7V i bought a german legal 20 kmh version of that scooter with licence plate. i transplantated all electronics from original m365 to the german one...why its slower now? in fact its still the same scooter?
@@pamming20youtube14 1.5.5 BUT.The legal version of m365 in Germany is delivered with honeycomb tires. I replaced the rear tire with my old 10 inch air tire, now it is 1 kmh faster again If I also replace the front tire, it may drive 28 kmh ^^ again
Añado : Después de probar hack de Camilo ( el mejor en estos temas ) Debo decir: Que hakear es una mierda 💩, lo PRINCIPAL la BATERÍA ...se gasta en nada kilómetros reales no harás más de 10 klms en modo sport. Dejarlo de fábrica es mi RECOMENDACIÓN SI QUERÉIS HAER 40klms de autonomía
GONKAD definitely! GONKAD365 is for Xioami M365 with Custom PRO dashboards. But ive used it like for 3 days and i can feel it ate alot of battery rather than the GONKAD for PRO version.
Reaumen El video te da una idea aunq es mas tratar y fallar, use el 090 pro y luego el 160 mod sin mod el amp llega a 33.3km y me consume como si fuera el S de 25km mod el amp llega a 38km pero solo te rinde 19km
Best, can you help me with this. I have gone through all the steps but my pro does not want to be faster than 29 KM. and at the first downgrade from the bluetoot i had 3 times and fail. but has gone up to 100%. then I have installed the flash hack. without errors I have done everything again but the same result remains
Below March 2017 - 1 fuse Above March 2017 - 2 fuse You can also check there's an app called m365 tools download it you'll see all the information about your scooter there
Hi I do the follow the process but mine still Ver 110. So I did repeat many time is still the same V110. The was show "sent retry" at 64% on the first time I wait for a min the reconnect. The 2nd time go up to 98% then word show done. Recheck still 110. The 3rd same as 2nd time. ... So I can't downgrade to V 090. Mine is V1.6.6 Please help if you know. Thk
Hi, thanks for the tutorial I just did it and it works!:) BUT - I did not change "Sport max phase/battery current" to 40000/20000 in the hack as I dont know what it exactly does. Do you know? I dont want to fuk up my scooter...
Hey bud been looking for a decent video on this that is updated im on 1.5.1 and didn't update what do you recommend i really want more speed lol :p subd
@@kimhansendk You are better off with m365 tools than the official app anyway. The only thing you can do with the MI app is accidentally update to a newer firmware.
In this video i only tested it in my m365 pro. But i can assure you that it is full working also in standard version. You just have to use different ble and patch file.
So I have a problem now. The hack worked, but now my whole panel doesn't show lights and the headlight doesn't turn on or off. The power button still works but I can't see the battery light and can't turn the head light on. I have the M365 normal. Any solutions? Thanks
What version of m365 do you have? Try to update the firmware first using mi home app and try again. Make sure youre using the correct files for your m365.
@@alfredytch I restarted my phone and scooter and still the same error message. 5 times I have tried now. BMS is 126, BLE 110, DRV 166, Just like in the video. Edit: My scooter screen blinks red 10km/h and the red service light for a second after failed flash. Should I upgrade to 1.68 and try with that?
I just found this hackm365.com/x/BLE/ however it shows 2 different versions BLE090.zip and BLE090_PRO.zip, I am not really sure which is the one that would work for the M365 Pro.
Used to use M365 but upgraded to M365Pro. (My M365 got stolen). What does "Sport max phase current" and "Sport max battery current" actually means. There is no explanation as for "Motor power constant" on an M365 hack. From my M365 I was use to "Motor power constant" and was using 40165. I would like to increase the traction/torque but not the speed. My old M365 with Motor Power Constant 40165 outperformed my M365Pro on stock FW 1.60 and that sucks. Anyone?
I read about this article on reddit and it say...the more power you have the less battery consumption there is...but im not quiet sure about it. Still researching more about this Sport max battery Current
HERE IS THE 1 MILLION ADVICE: You FIRST must connect the Smartphone with the Xiaomi Mi Home App in order to run the Downgrade. (Because the Scooter must TRUST via BLUETOOTH the device that is going flash the firmware, and it happen when you add it to the Mi Home App. I Discovered that after frustrated tries with return message "Sent Retry" errors and NO auto disconnect after try using the m365 DownG, then after add to Mi Home IT WORKED ! So good luck for everyone with more torch and more speed !
worked for me.
anyone having issues with the scooter locking/failing.. to unlock it.. just connect it to ninebot scooter app and press unlock.
One thing i noticed, if i set it to 34/35km/h.. the tool app doesnt register that its going up to 34/35km/h.. it caps at 18km/h.. which its definitely not doing 18km/h
Worked great, thanks. Higher top speed is great but feels slightly more sluggish off the line. Will try it again on full charge
Ride safe bro. Thank you
My m365 pro is a beast now. Thanks alot! More power!
Did u use GONKAD or GONKAD365 on your pro.
@@marcellocelano5646 i used GONKAD,,Cause GONKAD365 is for Xioami m365 with custom Pro Dashboard.
@@marcellocelano5646 But you can still use this GONKAD365 but i can feel this one ates lots of battery than GONKAD
@@pamming20youtube14 Thanks for that. Damn I put GONKAD365 can I put GONKAD ON it now?
@@marcellocelano5646 yup rip it!
Works with my Xiaomi M365 Pro. Mine came with 1.6.0 fw and 100 BLE, without this I was unable to upload the botox fw. Thanks for the video!
Youre welcome
did u firs upgrade it to 1.6.6? or just did the same steps like in the video? cause i have the same problem.
Try first to upgradr using the mi home app ( i have a tutorial also on how to do this , feel free to browse my videos) then after upgrading to 1.6.6 using mi home app try to follow my steps here again
Thanks to people like you putting in this kind of effort bringing u tube and hackers together we would be stuck without solutions thank you for your excellent tutorial I have subscribed and wish you many more subscribers.
Thank you very much. Just keep on sharing..
For a m365 pro, mine is currently 1.6.0 firmware BLE 110, so firstly downgrade to BLE90. Then which is the correct preset to create the custom firmware? For a M365 pro should I use GONKA or GONKAD?
do you know wich is the correct BLE version for the m365 pro ? cause in the index link I found hackm365.com/x/BLE/ however it shows 2 different versions BLE090.zip and BLE090_PRO.zip
Hi, I have the latest soft in 1s
BMS: V 1.4.1
BLE 1.3.6
ESC 3.1.6
How can I go back to the software of the previous 2.2.1 because the scooter then accelerated faster was more lively, and with the latest updated software it is really slow, now when I want to go back to the previous version of vanilla 2.2.1 it all loads but the speed is in D or S mode is the same, i.e. 20, previously in D mode it was 20 and in S mode it was 25: /
Thank you so much. I couldn't get my V1.6 to accept a flash because of the stupid BLE. this is the first guide that has shown how to Downgrade that. Now i can motor along at 30kph :D you're a superstar.
Mine too but i can't do it still now help
Just got my M365 Pro but it has a newer 1.6.8 firmware. Will this still work??
Kim Hansen I have the same problem... Will it work with 1.6.8?
Javier Gamboa Yeah, that’s what I am asking - I don’t want to brick the scooter.
There is a vid about flashing BLE i think to make this workable on the new updates. Just search it on youtube or reddit.
do you just leave everything on the botox website on default or did you change anything?
This should be test on the road , not in the air , where the scooter have weight not free air ;)
You can watch my other video for the actual test. Thank yoy
@@alfredytch ok
With this instruction I bricked my motherboard on m365pro 2019 version 1.6.8 now I need to pay for service.
That doesn't mean this instruction is bad, but ,for my motherboard and new files from proposed website it was.
So it's risky and I'm not stupid, I know electronic, Arduino programming and I work in IT sector.
Be aware, if you decide to hack, then expect major risk and possible cost.
Unfortunately I don't have "ST LINK" at the moment to try to unbrick it.
Also works with firmware 1.6.8. I have found that it works with an old Android tablet 4.4.2.
New links are here hackm365.com/x/
I did follow the steps and was able to downgrade from 1.6.8 to 1.5.5 THANK YOU SO MUCH!
I have the normal m365, which version should I put in the page?
Worked for me !! 1.6.8.. thnx!!
hi, can i do this also with my version 1.6.0? or should i first update it?
Yes, make sure you use the correct file for standard and pro version
I upgraded it to 1.6.6 and did your steps. 32 km/h with my weight of 70 kg :)
Enjoy sir!
boss how about m365 ver 1.5.6?
@@alfredytch the link for the pro 090 version ain't working
thanks for tutorial man it works to my pro 1.6.6 80%batt for 32kph i really enjoy it but it will be fine stay like this?
Yes
In any case BLE091 is ok? Or i ned to downgrade it to BLE90? I dont see the files now year 2020. The only files available is BLE072
it's not working for me. Perhaps they changed something in the firmware generator website. I can edit the cruise control time but the speed just stays locked at 28. On 365 pro ble90 1.5.5
I have an m365 with pro dashboard upgrade and have installed GONKAD365 on it. My scooter won't go above 18 mph even freewheeling at full charge. I have BMS126 and BLE90. Any ideas what might be wrong?
Does it work on the Isinwheel s9 max
I don't understand, in the video you are using a .zip file for the BLE Downgrade and in the description you putted a .bin file, which one of them do I need to use? Bin or zip?
Works on 1.6.8 pro thank you :)
How? I try and nothing
I just followed the video hmmm. Downgrade ble 1st then the firmware
@@drrrin.k I had the same problem. The process works if you use an old Android. I used a tablet with Android 4.4.2
@@arvassil i will try if it's work I tell you.. thanks.I use Android 10 and I think this is a problem
Dorin Corobceanu
Any joy did you get it to work?
Thanks bro only tthing that worked out for me
Hi, I flashed the BLE 090 and It end with success, but when I check it's again the previous version. Any solution? When the process ended the display blinked red two times and After that all normal
On 365 standard the max speed is 32km/ right? (With stock baterry withiut mods)
My (77kg weight) M365 classic goes max 34.9km/h on a flat with full stock battery, stock 8.5" tyres and my CFW. 🛴
Wish this worked for the hiboy max or inceptor hoverboard scooter or ES or even KUGOO so many clones but cant figure out how 5o remove the govenor and it's annoying ad it throws me off once hits 31... I need at least 40 or it's not very thrilling or therapeutic which is why ingot it.. dang... I'm gonna take the whole damn scooter apart bah
Hlo sir while flashing the ble 072 standard My Scooter turned off the display and it's start to blink the backlight please give me a solution
question if you do this speed hack is it irreversible?
Please help me how much battery Wil I have? Great video
what doues "Sport max phase current" and "Sport max battery current" mean?
Whats maximum? i want full throlle in sport mode and in the other modes just range
if you want with no speed limit check the last option saying "Enable built-in current-driving throttle algorithm" but be careful on burning your motor.
@@pamming20youtube14 But then I have no speed limit in all 3 modes right?
Would only like it in sport mode if the police come, in Germany only 20 km/h are allowed ^^
I thought this is this "Russian algorythm" but for the pro board
@@pamming20youtube14 its the same as before, the dashboard shows 29/30 kmh but when i drive it i just reach 26 kmh(after 5 minutes just 24) the battery cells are okay, and max voltage is 41,7V
i bought a german legal 20 kmh version of that scooter with licence plate. i transplantated all electronics from original m365 to the german one...why its slower now? in fact its still the same scooter?
@@Bergwacht what firmware did you flashed?
@@pamming20youtube14 1.5.5
BUT.The legal version of m365 in Germany is delivered with honeycomb tires. I replaced the rear tire with my old 10 inch air tire, now it is 1 kmh faster again
If I also replace the front tire, it may drive 28 kmh ^^ again
Is BLE72 better than BLE90? I flashed mine and the hack seems to work. Getting 31.1km/h at the moment. Thanks!
the link doesnt work anymore. can you help?
is this going to work also on 365 regular
Añado :
Después de probar hack de Camilo ( el mejor en estos temas )
Debo decir:
Que hakear es una mierda 💩, lo PRINCIPAL la BATERÍA ...se gasta en nada kilómetros reales no harás más de 10 klms en modo sport.
Dejarlo de fábrica es mi RECOMENDACIÓN SI QUERÉIS HAER 40klms de autonomía
It worked like a charm. Cheers mate!
Hi, do you know if this works on 1.6.8 and downgrading from BLE110? I keep getting sent retry .. cancelled - thank you!
Someone posted that it works on 1.6.8 about 3 weeks ago, so you should be able to do it. @arvassil posted it
Wouter Vermeiren thanks, I’ll keep asking around if anyone was able to get around the error I’m getting. Thanks!
@@MissSomersault I have the same issue "cancelled due to retry", I think only solution is to try this with an older Android 4.x phone
Hi love the video, quick question I have a m365 pro just wondering which firmware I should use GONKAD or GONKAD365. Thanks
GONKAD definitely! GONKAD365 is for Xioami M365 with Custom PRO dashboards. But ive used it like for 3 days and i can feel it ate alot of battery rather than the GONKAD for PRO version.
@@pamming20youtube14 thanks for that buddy. Damn I put GONKAD365 can I put GONKAD ON it now?
Excellent tutorial mate, thanks
you're welcome!
Reaumen El video te da una idea aunq es mas tratar y fallar, use el 090 pro y luego el 160 mod sin mod el amp llega a 33.3km y me consume como si fuera el S de 25km mod el amp llega a 38km pero solo te rinde 19km
Best,
can you help me with this.
I have gone through all the steps but my pro does not want to be faster than 29 KM.
and at the first downgrade from the bluetoot i had 3 times and fail.
but has gone up to 100%.
then I have installed the flash hack.
without errors
I have done everything again but the same result remains
is oke now white gonkad
@@deproost14 how fast youre pro is now going? :))
Can I do this with an iPhone?
working with 1.6.8 firmware also ?! Thanks
not work, i buy pro 2 and have firmware v 2.4.5
okay boss try ko update to kasi last year pa po ito mas bago napo ung mga firmware ngaun
thanks pal worked great appreciate the help liked the vid cheers again man
YOU ABSOLUTE LEGEND MATE!!!
Thank you bro!
Hello! Nice video! I got the Xiaomi m365 Pro version and update 1.6.8. Does this tutorial applies to 1.6.8 version too? Or just 1.6.6? Thanks!
My 365 has v1.5.6 will this work? Thanks ..
How about battery charging i get 99% only after i do this charger light green but 99% only showing
Hi bro how to know if the m365 pro is dual fuse or single fuse?
I think PRO version have only 2 fuses. only Xiaomi m365 had 1 or 2...correct me if im wrong. thanks
Below March 2017 - 1 fuse
Above March 2017 - 2 fuse
You can also check there's an app called m365 tools download it you'll see all the information about your scooter there
Hi guys any chance anyone can tell me how to downgrade from V1.6.8 as this came with it on when purchased. Thanks
My version of my scooter in 1.5.6 , can I downgrade it? Thankss
Did you did it?
Hi I do the follow the process but mine still Ver 110. So I did repeat many time is still the same V110. The was show "sent retry" at 64% on the first time I wait for a min the reconnect. The 2nd time go up to 98% then word show done. Recheck still 110. The 3rd same as 2nd time. ... So I can't downgrade to V 090. Mine is V1.6.6
Please help if you know. Thk
What Xiaomi you got? this is only for Pro version and Custom Pro Dash board M365.
Hey can you give new link because this doesnt exist?
Thanks man! Worked! Great stuff 👍
Sir d na ma on m365 ko after downgrade
Its work 1.5.1?
Thanks cool😁👍
When you use this hack can you still update it next time if suddenly you want the latest software update?
Yes
Hi, thanks for the tutorial I just did it and it works!:)
BUT - I did not change "Sport max phase/battery current" to 40000/20000 in the hack as I dont know what it exactly does. Do you know? I dont want to fuk up my scooter...
My scooter is going 27km/h with this hack how do i get it faster?
Does this work for my pro 1.60?
Hey if i check my ble en bms they are 10201, and i got 2 bms and 2 ble numbers showing, can use the speedhack?
what version of M365 do you have?
@@alfredytch i have a m365 but with a pro display.
Hey bud been looking for a decent video on this that is updated im on 1.5.1 and didn't update what do you recommend i really want more speed lol :p subd
Im on BLE 091 do i need to upgrade that
4:41 I wonder whats in the teen folder
It's TEEN FONT my friends. My favorite font. Currently using from this video until now. Hahaha. It's not what you're thinking 😂
I did the hack but now I cannot connect to the Mi Home app. I get a “Connect fail” message. Any suggestions??
Try changing region to China in the App
Kevin Vellanoweth I tried that but unfortunately it did not fix the problem. It connecte fine to DarknessBot and M365 Tools but not Mi Home.
@@kimhansendk You are better off with m365 tools than the official app anyway. The only thing you can do with the MI app is accidentally update to a newer firmware.
And for the classic m365?
In this video i only tested it in my m365 pro. But i can assure you that it is full working also in standard version. You just have to use different ble and patch file.
1.6.6 its m365 pro not regular
Check in the description. I have ble for standard and pro
@@alfredytchThe BLE version can also change the speed of the xiaomi??
@@alfredytch i have the regular but changed the panel display and bluetooth for the pro one.. so i should still take the pro zip right?
Seems like the blu version for the pro is not available anymore
here I fixed it, this works www.hackm365.com/x/BLE/
Thanks It worked!!!
So I have a problem now. The hack worked, but now my whole panel doesn't show lights and the headlight doesn't turn on or off. The power button still works but I can't see the battery light and can't turn the head light on. I have the M365 normal. Any solutions? Thanks
I already tried unplugging the battery but didn't worked.
What version of m365 do you have? Try to update the firmware first using mi home app and try again. Make sure youre using the correct files for your m365.
Holy shit.i download versio 072 and now my scooter is not working.damn
Is it safe to flash these to the scooter?
no, its possible that you brick your scooter, but if the firmware update failed, just try another one.
When I try to install the ble090 on the scooter, it says "cancelled due to retry". I did exactly as in video. Can someone help please?
Try to connect again and check the version
@@alfredytch I restarted my phone and scooter and still the same error message. 5 times I have tried now.
BMS is 126, BLE 110, DRV 166, Just like in the video.
Edit: My scooter screen blinks red 10km/h and the red service light for a second after failed flash. Should I upgrade to 1.68 and try with that?
U need to install previous version of downg, as new version wont flash. Tried it last night
@@christopherking1155 I tried with v17 and another phone with v18
Masi Lindbäck no you need an old version like 1.5. flash that 1st then the custom one.
Hei! I need help.I use iPhone and I don’t know how?
BLE link is not working for pro. Pls update
Should not have used Gonkad365 +pro it's the 365 with pro dash
Use the gonkad mods on sport and d speed.
I have a pro should i use the gonkah one?
@@marcellocelano5646 GONKAD is better in my opinion..especially if your using The PRO version.
But it's better gonka or gonkad
Hi ,Bro I have done this Process but its not work could you please help me .
Does the hack works on the IPhone 8 ?
interested to know if its only for android users too
app downg is only for android users, borrow from someone android phone for 15 mins
Can i do it in ios
Before hack procedure i have update firmware its okay i think that why its not work
Dzięki wielkie
cant use link
boss s m365 version 1.5.6 pwede kaya to?
Hi sir.. Pwede sya kung naka Custom Pro dash board na ung xiaomi m365 mo..piliin mo ung GONKAD365.
The BLE090 link says file not found
Help me to do this i cant find ag files thanks
Had an error page for the ble version... could u fix it bro..tnx
I just found this hackm365.com/x/BLE/ however it shows 2 different versions BLE090.zip and BLE090_PRO.zip, I am not really sure which is the one that would work for the M365 Pro.
here I fixed it, this works www.hackm365.com/x/BLE/
my m365 pro the BMS its 0126 and ESC version 0166 do you think its gonna work? tahnks
Yes
Zip ?
Pro version is not working..
This page is not found
the link with the BLE090 version doesent work
How I can simplify hacking speed Xiaomi m365 pro?
Doesn`t hurt the scooter(srytrashenglish)
No sir. It is safe for our scooter
BLE version for the pro dont work. @
ALFREDORIAS VLOGS
What about the bms file ?
The ble90 link doesnt work?
here I fixed it, this works www.hackm365.com/x/BLE/
Used to use M365 but upgraded to M365Pro. (My M365 got stolen).
What does "Sport max phase current" and "Sport max battery current" actually means. There is no explanation as for "Motor power constant" on an M365 hack.
From my M365 I was use to "Motor power constant" and was using 40165.
I would like to increase the traction/torque but not the speed.
My old M365 with Motor Power Constant 40165 outperformed my M365Pro on stock FW 1.60 and that sucks. Anyone?
I read about this article on reddit and it say...the more power you have the less battery consumption there is...but im not quiet sure about it. Still researching more about this Sport max battery Current
Is not work😭