I would recommend covering adding sounds for the switches (Angle Mode / Acro Mode) or (Rate Profile 1). it makes the switches fool proof and also warns you if you pull it out of a bag and a switch is off and you don't realize it, on power on it tells you everything.
You can also check out the angle feedforward set at 150 or 200,because it's default is 50...type in cli set angle_feedforward = 200...then the angle mode rates will be responsive
Hmm, unless something has changed, I think yaw does use an actual rate, so putting zero wouldn’t be a good idea. Granted, I haven’t played with 4.5 to confirm any of these “improvements”. Rate switching has always been one of the things I’ve recommended in the PMB setup, and now it looks like it’s almost mandatory. Thanks for continuing to provide great content, Joshua!
Pretty sure Emu got it from NFE silverware. Might not be for everyone if they’re not used to it, but lots of people love(d) it-myself included. Excited to try it out.
Great intro to adjustments tab^. I won't be doing a custom rate profile for angle; I bet there will be an option to revert back 'previous angle rate' or something like that in the CLI at some point. But I can already think of a million things Adjustments could be used for now 🤙
Do a quicksilver tutorial! Lots of whoop racers use it, super simple to setup, and its less buggy than the latest BF variants, angle mode rocks in Quicksilver and with no airmode you can bounce off gates better.
This might explain what I am feeling with my GEPRC Cinebot 25 running 4.5 and my Pavo20 running 4.4. The Cinebot with similar rate profiles drove like it was on ice in angle mode. It took HUGE stick deflections to get it to respond. Where the Pavo running 4.4 I need the tiniest of tiny movements and the rates are almost tuned as low as they will go. I feel the Cinebot I have a range of useful adjustment. My rates are so much higher that the pavo. I am still getting sorted but at least I feel I can make it too slow or too fast changing rates.
I don’t know what they were thinking. The ideal expo curve for acro mode will never be that same as for angle mode. I already have a selection of rates for different situations. I would have to settle on just one rate to use this work around. Would prefer an option to just turn off their behavior or just have one expo curve for angle separate from the other rates.
Holy shit "not sure I appreciate this change" is such an understatement. Angle mode is fucking trash now. No idea how to just make it feel like it used to.
Not sure why but Angle mode in my case Betaflight 4.5 was so bad on my F411 2.5 inch whoop that I had to fhash back after second fight , but same version on Mamba 405 freestyle 5 inch was working just fine.
It is good to be able to assign sevceral rates in a 3 switch button.... but how coyld I manage to, i.e. when I switch to one determined rateprofile at the same time it switches on the angle mode? and another switch position with a rate profile for Cinewhoop mode to turn automatically AirMode? that would be great to get
Ok Joshua, but what if I want my 3 different rate profiles (low/med/high) in ACRO ? With your solution I would have to give that up. Or do you see any way to have switchable rates in ACRO, and then still go linear in ANGLE ??? THAT would be the real solution...
Yes I do think you could do that, it would just take a little more tweaking with custom programming in the radio to make the aux channel move as requested. But either way, you're only getting three rate profiles.
@@JoshuaBardwell Meh... that would require pretty complicated EdgeTX programming. Def not easy to handle for most. I think the BF devs overstepped here, they need to implement a dedicated rate box for ANGLE mode - or at least enable a CLI command to disable rates on ANGLE. Sidenote: I just noticed it´s showing Rateprofile 1-4 in the Rateprofile dropdown ??? How about while in ACRO on switch A you can have rateprofiles 1-3 on switch B as usual, but when switch A goes to ANGLE, ignore switch B and set "rateprofile 4" by default, which would then be a profile just for ANGLE mode. Maybe you could try that in a video ?
@@JoshuaBardwell BF used to have CLI command "set rate_6pos_switch", but that isn´t supported anymore. Permanently only rateprofiles 1-4 available. But how do I friggin program to select "rateprofile 4" ??? Channel setting 1000-2000us only does profile 1-3. Can someone enlighten me ? ;)
It is like you spent 20 years driving a gas ⛽️ car and you try a Tesla with a different pedal and steering system and you just don’t particularly like it. Then the tipping point is the blinkers get stuck and don’t disengage after you make a turn or lane change. So you don’t buy one. #betaflight
Ineed help I just got the jumper t light v2 and I need help flashing it I open the configurator and set the release as 3.3.2 device category should be jumper 2.4GHz and the device should have 2400 tx but the only options are stuff that says 2.4GHz please I need help I might quit I don't want to I want to fly whoops
Since it is my very first time I want to use Betaflight on my windows pc and connect my geprc cinelog 25 flight controller for configuration which betaflight version do you recommend to download? Between 4.3.0 and 4.4.0? Or the latest 4.5.0 is better?
Angle strength still does exactly what it always did. The Angle PID loop uses angle strength as a P gain for tracking the commanded angle. The only thing that 4.5 changed is that the relation between commanded angle and stick deflection is not linear any more.
@@JoshuaBardwell angle_feedforward is also new and makes a massive difference. In previous betaflights, you hade to set P gain, which would be too low for snappy response (full left to right would take like a second!) or too high and cause oscillations. Or usually both at once, oscillations and still slow. Now its snappy and crisp like in acro mode.
What a pain in the ass why would you assume that someone would want there acro rate curve to apply to angle mode. Its a big problem for me and will mean I wont bother with at32 flight controllers and stick to Betaflight 4.4 I love Betaflight but sometimes there are decisions like this that really are bone headed tbh.
Whoop pilots, beginners, and me - on a quick switch, so I can: (1) When my video dies I can switch to angle, pull my goggles up and fly back LOS. I'm not very good with acro LOS, especially when the drone is a way off. (2) When I crash into a tree branch, spin and lose what orientation I'm in, it can get me back to level and then if I'm still in the air, I return to acro.
I would recommend covering adding sounds for the switches (Angle Mode / Acro Mode) or (Rate Profile 1). it makes the switches fool proof and also warns you if you pull it out of a bag and a switch is off and you don't realize it, on power on it tells you everything.
Yea I add sound tracks for a lot of switches
You can also check out the angle feedforward set at 150 or 200,because it's default is 50...type in cli set angle_feedforward = 200...then the angle mode rates will be responsive
Just I came with the first fly in 4.5, for me angle mode now is just perfect!🎉🎉🎉😅
I find the Stock Betaflight 4.5 Angle mode,Fantastic!
I'm going to give it a try on something and stick with it to see. But I see JBs point after a first flight on one, it feels weird!
Dude, hell yeah, JB. THIS is the content I miss! Great video!
Yeah 😊
Damn this is an excellent video! So good at explaining and breaking things down for us! Thank you Joshua!
Hmm, unless something has changed, I think yaw does use an actual rate, so putting zero wouldn’t be a good idea. Granted, I haven’t played with 4.5 to confirm any of these “improvements”.
Rate switching has always been one of the things I’ve recommended in the PMB setup, and now it looks like it’s almost mandatory.
Thanks for continuing to provide great content, Joshua!
Pretty sure Emu got it from NFE silverware.
Might not be for everyone if they’re not used to it, but lots of people love(d) it-myself included. Excited to try it out.
Linear curve is a line, right? :)
😂😂😂
Right
Squircle = A square circle.
Lines to not exist. They are arches of circles with the radius to infinity
in mathematicall graphs a straight line also counts as a curve.
Great intro to adjustments tab^. I won't be doing a custom rate profile for angle; I bet there will be an option to revert back 'previous angle rate' or something like that in the CLI at some point. But I can already think of a million things Adjustments could be used for now 🤙
Do a quicksilver tutorial! Lots of whoop racers use it, super simple to setup, and its less buggy than the latest BF variants, angle mode rocks in Quicksilver and with no airmode you can bounce off gates better.
This might explain what I am feeling with my GEPRC Cinebot 25 running 4.5 and my Pavo20 running 4.4. The Cinebot with similar rate profiles drove like it was on ice in angle mode. It took HUGE stick deflections to get it to respond. Where the Pavo running 4.4 I need the tiniest of tiny movements and the rates are almost tuned as low as they will go. I feel the Cinebot I have a range of useful adjustment. My rates are so much higher that the pavo. I am still getting sorted but at least I feel I can make it too slow or too fast changing rates.
thanks for the vid
i always love your contenet
Thanks for the tutorial, Joshua! 😊
Stay safe there with your family! 🖖😊
Far as I know, there is some Angle expo hard coded in BF4.5
I don’t know what they were thinking. The ideal expo curve for acro mode will never be that same as for angle mode. I already have a selection of rates for different situations. I would have to settle on just one rate to use this work around. Would prefer an option to just turn off their behavior or just have one expo curve for angle separate from the other rates.
Holy shit "not sure I appreciate this change" is such an understatement. Angle mode is fucking trash now. No idea how to just make it feel like it used to.
Do you have a vid on setting up turtle mode? Thanks
www.youtube.com/@JoshuaBardwell/search?query=turtle%20mode
Not sure why but Angle mode in my case Betaflight 4.5 was so bad on my F411 2.5 inch whoop that I had to fhash back after second fight , but same version on Mamba 405 freestyle 5 inch was working just fine.
It is good to be able to assign sevceral rates in a 3 switch button.... but how coyld I manage to, i.e. when I switch to one determined rateprofile at the same time it switches on the angle mode? and another switch position with a rate profile for Cinewhoop mode to turn automatically AirMode? that would be great to get
guessing this is a rant due to trying to do racegow in angle mode. i had the same issue and went straight back to 4.4
Ok Joshua, but what if I want my 3 different rate profiles (low/med/high) in ACRO ? With your solution I would have to give that up. Or do you see any way to have switchable rates in ACRO, and then still go linear in ANGLE ??? THAT would be the real solution...
Yes I do think you could do that, it would just take a little more tweaking with custom programming in the radio to make the aux channel move as requested. But either way, you're only getting three rate profiles.
@@JoshuaBardwell Meh... that would require pretty complicated EdgeTX programming. Def not easy to handle for most. I think the BF devs overstepped here, they need to implement a dedicated rate box for ANGLE mode - or at least enable a CLI command to disable rates on ANGLE. Sidenote: I just noticed it´s showing Rateprofile 1-4 in the Rateprofile dropdown ??? How about while in ACRO on switch A you can have rateprofiles 1-3 on switch B as usual, but when switch A goes to ANGLE, ignore switch B and set "rateprofile 4" by default, which would then be a profile just for ANGLE mode. Maybe you could try that in a video ?
@@JoshuaBardwell BF used to have CLI command "set rate_6pos_switch", but that isn´t supported anymore. Permanently only rateprofiles 1-4 available. But how do I friggin program to select "rateprofile 4" ??? Channel setting 1000-2000us only does profile 1-3. Can someone enlighten me ? ;)
I got no angle mode option for some reason
How to Fix gps 0 sats... All connected betaflight shown me that flight controller is talking to gps module
It is like you spent 20 years driving a gas ⛽️ car and you try a Tesla with a different pedal and steering system and you just don’t particularly like it. Then the tipping point is the blinkers get stuck and don’t disengage after you make a turn or lane change. So you don’t buy one. #betaflight
How would Angle and acro not be on same.. turning off angle makes it acro
Fair.
I'd say angle mode is improved, not broken.
But that's not as clicky a title
Ineed help
I just got the jumper t light v2 and I need help flashing it I open the configurator and set the release as 3.3.2 device category should be jumper 2.4GHz and the device should have 2400 tx but the only options are stuff that says 2.4GHz please I need help I might quit I don't want to I want to fly whoops
I ONLY fly in acro mode. I just think angles are out of place😅
The aio blheli32 passthrough is broken also
What?! I've been testing for a while and no issues across many aios while flashing and configuring bluejay
@@BrandonBeansmaybe it's just blheli 32 then because I had to flash back to 4.4 change settings then flash back itsblunty is the one who told me
@@runpuppyfpv5744 that appears fixed in master as of 2 weeks ago. Go flash 4.5 Zulu (not rc2) to get this. Pull number 13364
Im a noob, would love stabilized mode or even rth just incase oh sh1t moments
Since it is my very first time I want to use Betaflight on my windows pc and connect my geprc cinelog 25 flight controller for configuration which betaflight version do you recommend to download? Between 4.3.0 and 4.4.0? Or the latest 4.5.0 is better?
Personally I'm using 4.5 RC2 but it does have a couple small bugs that you might care about it.
@@JoshuaBardwell I understand. In case I want to use previous versions 4.4 or 4.3 I suppose I can find them available on the Betaflight website right?
You can flash 4.4 and 4.3 from the configurator.
@@JoshuaBardwell Alright you probably mean 10.9 latest configurator version correct?
Yes.
So angle strentgh doesnt do anything anymore?
Angle strength still does exactly what it always did. The Angle PID loop uses angle strength as a P gain for tracking the commanded angle. The only thing that 4.5 changed is that the relation between commanded angle and stick deflection is not linear any more.
@@JoshuaBardwell angle_feedforward is also new and makes a massive difference. In previous betaflights, you hade to set P gain, which would be too low for snappy response (full left to right would take like a second!) or too high and cause oscillations. Or usually both at once, oscillations and still slow. Now its snappy and crisp like in acro mode.
What a pain in the ass why would you assume that someone would want there acro rate curve to apply to angle mode.
Its a big problem for me and will mean I wont bother with at32 flight controllers and stick to Betaflight 4.4
I love Betaflight but sometimes there are decisions like this that really are bone headed tbh.
Who uses angle mode? 🤔
Whoop pilots, beginners, and me - on a quick switch, so I can: (1) When my video dies I can switch to angle, pull my goggles up and fly back LOS. I'm not very good with acro LOS, especially when the drone is a way off. (2) When I crash into a tree branch, spin and lose what orientation I'm in, it can get me back to level and then if I'm still in the air, I return to acro.
broken? lol.. how it's a "improvement" than?