I took out the drive bay and added an intake fan on the bottom side panel. Temps dropped by 10-20 degrees. All the stutters I was getting disappeared. So if you're noticing some high temps on your CPU or any throttling/stutters then I highly recommend adding a fan to your system. 92 mm fans fit perfectly. Can drill holes for bigger 120mm if needed. $8 sata to fan controller and a PWM 92 mm Fan for $7-11 brings out the full potential to this computer. Along with added more storage and ram. Download GPU-Z and monitor your computers temps. Before I was reaching the max CPU thermal limit on SC2 and CoD MW, and was getting stutters all over the place. After this mod everything was back to normal.I build computers, and this was a must do mod IMO. pretty easy to do also. Just touch the side of your computer and you can feel how hot it gets. Of course depending on what you're doing with this. Light gaming and editing and this PC shouldn't break a sweat. But throw in some demanding games and temps rise like crazy.
If you are klutz like me and are not concerned about the appearance of your computer here's the lazy person's alternate approach to bluex610's suggestion. To solve the problem of the lack of a proper intake fan, you can replace the side case panel with a similar sized laptop cooler pad standing on its side. From my experience, the best results are a multi-fan cooler (2-5 fans) blowing inward. I used the Rosewill (Newegg house brand) RWNB16A Notebook Cooling Pad (5 fans, 3 modes & 6 power settings). As of 1-31-2020 it was about $15 + tax and free shipping on Amazon. Power the cooler using one of the USB ports on the back of the case. Secure the cooler pad to the case top with a bent paper clip to prevent it from falling over. Not pretty to look at, but it seems to help.
hi to this pc can you change the motherboard and add a new cooling system? also just in case you can disassemble and change to a slightly larger cabinet ????
@@thatstuff660 my younger cousin has it and the only time I had problems when I was playing R6 was when it was connected through wifi. Bought a e-cable to direct connect and stay at a decent 200mb, and it runs Good. No problems on R6, which is the only reason im buying a PC. Apex Legends and games with a lot of visuals seem to have the issues, but I wasnt getting this system to run Apex.
I have it and works beautifully. Has been reviewed by numerous tech channels all of which were impressed by the quality. Only complaint is the PSU is low powered at 400w so upgrading the card to something with a higher TDP is difficult without buying the proprietary PSU from HO which is approximately $105 for 500w. Plus side on this is the CPU can be upgraded as well, I know i7-8400 will work, have heard rumors that i9 will, but not sure. They made it simple to upgrade RAM and SSD/HDD so what more could you really ask for from such a cheap PC?
hi to this pc can you change the motherboard and add a new cooling system? also just in case you can disassemble and change to a slightly larger cabinet?
For 16 Gb 2x8 would be best for dual channel benefits. If you would like to upgrade to 32 Gb later go with 16 Gb. www.newegg.com/g-skill-8gb-288-pin-ddr4-sdram/p/N82E16820232722?Item=N82E16820232722&sdtid=12815956&nm_mc=AFC-RAN-COM&cm_mmc=AFC-RAN-COM&Slickdeals%20LLC&AFFID=208164&AFFNAME=Slickdeals%20LLC&ACRID=1&ASUBID=e26cd4fe3e2111ea8bfb36987a0a01ff0INT&ASID=https%3a%2f%2fslickdeals.net%2ff%2f12815956-8gb-g-skill-aegis-ddr4-2666-desktop-memory-module-41-16gb-72-ac-newegg-16gb-2x-8-ripjaws-v-ddr4-3000-81-ac-32gb-sniper-kit-171-ac%3fsrc%3dSiteSearchV2Algo&ranMID=44583&ranEAID=208164&ranSiteID=lw9MynSeamY-K5a8Y4hru58bJ0kz7z4rkA Or www.newegg.com/g-skill-16gb-288-pin-ddr4-sdram/p/N82E16820232766?Item=N82E16820232766&sdtid=12815956&nm_mc=AFC-RAN-COM&cm_mmc=AFC-RAN-COM&Slickdeals%20LLC&AFFID=208164&AFFNAME=Slickdeals%20LLC&ACRID=1&ASUBID=37f831ac3e2211eaa25ac695055d12510INT&ASID=https%3a%2f%2fslickdeals.net%2ff%2f12815956-8gb-g-skill-aegis-ddr4-2666-desktop-memory-module-41-16gb-72-ac-newegg-16gb-2x-8-ripjaws-v-ddr4-3000-81-ac-32gb-sniper-kit-171-ac%3fsrc%3dSiteSearchV2Algo&ranMID=44583&ranEAID=208164&ranSiteID=lw9MynSeamY-g3wyClqftM4ZgjNLJyIraQ
@@curiousitech9807Can someone buy one of brand 8GB you recommend to give computer total of 16GB? Or should buy two 8GB of your recommended brand to replace old memory that came with the PC?
just got this computer and its so SMALL, considering the nice graphics cards it has, it worries me about how well it will cool and if the PSU can handle it
I had no problems with the PSU but the stock coolers are not the best. The temp goes over 70 C on high power tasks like rendering 4K videos and the noise at high revs is bothering me. Just ordered some Noctua fans and cooler, hoping for lower temps and noise. I'll update with the results...
I have a question I hope you can help me with. Can you give me the internal length inside the case or the size of that graphic card? I’d like to know what is the largest graphics card that can fit inside.
you can go with a bigger capacity M.2 NVMe but you'll have to reinstall windows or the easier and cheaper way by getting a SATA SSD as you can see on the video.
@@isaiahhall2058 Any SATA SSD would work. All you need are the screws, my Samsung Evo did not come with them. The good part is that this unit has the SATA and power cable waiting for a new SATA SSD inside.
@@curiousitech9807 My desktop (690-0020) is very similar but has a HDD with an empty M.2 slot. Would I need to still reinstall windows to use to use the M.2?
@@curiousitech9807 just add another m.2 SSD I purchased. Its a little annoying that on the specifications page it says there are 2x M.2 slots available under "Expansion Slots". I guess I'll buy a enclosure
@@curiousitech9807 Was there an open PCIE expansion slot available? Currently looking at this www.amazon.com/YATENG-Controller-Expansion-Card-Support-Converter/dp/B07JJTVGZM/ref=sr_1_4?dchild=1&keywords=pcie+m.2+adapter&qid=1595150219&sr=8-4 and was wondering if I could install this on the pavilion in lieu of a 2.5 enclosure.
the nvme ssd that comes with the 690-0073w is only x2, does the motherboard support a x4 nvme ssd like the samsung 970? Will the samsung nvme ssd run at x4 speed or only x2? thanks
@@curiousitech9807 Thanks!. I might be wrong but I believe you listed the features of the Hynix m.2 SSD itself (which is definitely x2). The features listed under the "Intel Cannon Lake-H/S - PCI Express Root Port #9 [B0]" (the m.2 mobo slot) show Max=4x and Current=2x (this is the Hynix SSD). I guess the only way to know for sure is to have someone posting some benchmarks after the upgrade to a NVME x4 SSD. General Information Device Name: Intel Cannon Lake-H/S - PCI Express Root Port #9 [B0] Original Device Name: Intel Cannon Lake-H/S - PCI Express Root Port #9 [B0] Device Class: PCI-to-PCI Bridge Revision ID: F0 [B0] PCI Address (Bus:Device:Function) Number: 0:29:0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_8086&DEV_A330&SUBSYS_00000000&REV_F0 PCI Express Version: 3.0 Maximum Link Width: 4x Current Link Width: 2x Maximum Link Speed: 8.0 GT/s Current Link Speed: 8.0 GT/s Device/Port Type: Root Port of PCI Express Root Complex
The m.2 slot is definitely 4x, I just installed an EVO plus and the results are Sequential Read (Q= 32,T= 1) : 3517.121 MB/s Sequential Write (Q= 32,T= 1) : 3217.411 MB/s
@@UragonAko123 It would be easier to install another intake fan if you remove completely the drives bay/cage and only use the PCIe NVMe M.2 SSD for storage.
thank you bro. maybe ill change the exhaust fan to noctua 92mm with 2500rpm max and but ill change the cooler and the fan. but idk what will fit, any recommendations?
Would this hard drive fit in the bay? If so which screws would I need? www.amazon.com/Seagate-BarraCuda-Internal-Drive-3-5-Inch/dp/B07H2RR55Q/ref=sr_1_3?dchild=1&keywords=hard+drive&qid=1595929886&s=electronics&sr=1-3
![[BIY #3]: Upgrade Ram on Hp Pavilion Gaming Desktop 690-0010](http://i.ytimg.com/vi/S5Ur1gemLsE/mqdefault.jpg)
I took out the drive bay and added an intake fan on the bottom side panel. Temps dropped by 10-20 degrees. All the stutters I was getting disappeared. So if you're noticing some high temps on your CPU or any throttling/stutters then I highly recommend adding a fan to your system. 92 mm fans fit perfectly. Can drill holes for bigger 120mm if needed. $8 sata to fan controller and a PWM 92 mm Fan for $7-11 brings out the full potential to this computer. Along with added more storage and ram.
Download GPU-Z and monitor your computers temps. Before I was reaching the max CPU thermal limit on SC2 and CoD MW, and was getting stutters all over the place. After this mod everything was back to normal.I build computers, and this was a must do mod IMO. pretty easy to do also. Just touch the side of your computer and you can feel how hot it gets. Of course depending on what you're doing with this. Light gaming and editing and this PC shouldn't break a sweat. But throw in some demanding games and temps rise like crazy.
Where did u put the extra storage at since u removed the drive bay? I got this pc for christmas and I am new to pc.
@@adammachi8112 got some 3m command strips and stuck them to the front and top of the case. Works good for most 2.5" drives. SSD preferbly.
How do u mount fan
If you are klutz like me and are not concerned about the appearance of your computer here's the lazy person's alternate approach to bluex610's suggestion. To solve the problem of the lack of a proper intake fan, you can replace the side case panel with a similar sized laptop cooler pad standing on its side. From my experience, the best results are a multi-fan cooler (2-5 fans) blowing inward. I used the Rosewill (Newegg house brand) RWNB16A Notebook Cooling Pad (5 fans, 3 modes & 6 power settings). As of 1-31-2020 it was about $15 + tax and free shipping on Amazon. Power the cooler using one of the USB ports on the back of the case. Secure the cooler pad to the case top with a bent paper clip to prevent it from falling over. Not pretty to look at, but it seems to help.
This was a great video!! Very helpful
This was very helpful. Thanks
hi to this pc can you change the motherboard and add a new cooling system? also just in case you can disassemble and change to a slightly larger cabinet ????
ok i need help i have this exact one an it won't budge
weird...i have the same HP model but my PSU doesn't have an extra power cable for me to install the extra ssd. Any idea?
check the PSU specs. Might not be the same
Planning on using my tax return on getting this, cool that I can upgrade it down the road
That's funny because I've got the same plan too lol.
@@jeffsurju6991 same here! Come back here if you ever get R6 and want to play lmao If I have my system ill be ready!
Don't get it, it has tons of problems
@@thatstuff660 my younger cousin has it and the only time I had problems when I was playing R6 was when it was connected through wifi. Bought a e-cable to direct connect and stay at a decent 200mb, and it runs Good. No problems on R6, which is the only reason im buying a PC. Apex Legends and games with a lot of visuals seem to have the issues, but I wasnt getting this system to run Apex.
I have it and works beautifully. Has been reviewed by numerous tech channels all of which were impressed by the quality. Only complaint is the PSU is low powered at 400w so upgrading the card to something with a higher TDP is difficult without buying the proprietary PSU from HO which is approximately $105 for 500w. Plus side on this is the CPU can be upgraded as well, I know i7-8400 will work, have heard rumors that i9 will, but not sure. They made it simple to upgrade RAM and SSD/HDD so what more could you really ask for from such a cheap PC?
Will a HyperX FURY HX426C16FB3/8 8GB 2666MHz DDR4 DIMM
Work if I insert it?
Would a 3.5” HDD fit in that space? If so what brand would you recommend for a 2tb?
Yes, it would fit. Seagate or western digital are fine.
hi to this pc can you change the motherboard and add a new cooling system? also just in case you can disassemble and change to a slightly larger cabinet?
I'm looking to upgrade to 16gig ram what do you recommend I'm super green when it comes to computers
got one for 350 at my local walmart
Bag Kid same
@@GloomNextDoor Found one for $400 in store a few days ago.
Mine costed 820
Got mine for 300
Any recommendations for ram sticks? Leave a link like amazon would be cool
For 16 Gb 2x8 would be best for dual channel benefits. If you would like to upgrade to 32 Gb later go with 16 Gb. www.newegg.com/g-skill-8gb-288-pin-ddr4-sdram/p/N82E16820232722?Item=N82E16820232722&sdtid=12815956&nm_mc=AFC-RAN-COM&cm_mmc=AFC-RAN-COM&Slickdeals%20LLC&AFFID=208164&AFFNAME=Slickdeals%20LLC&ACRID=1&ASUBID=e26cd4fe3e2111ea8bfb36987a0a01ff0INT&ASID=https%3a%2f%2fslickdeals.net%2ff%2f12815956-8gb-g-skill-aegis-ddr4-2666-desktop-memory-module-41-16gb-72-ac-newegg-16gb-2x-8-ripjaws-v-ddr4-3000-81-ac-32gb-sniper-kit-171-ac%3fsrc%3dSiteSearchV2Algo&ranMID=44583&ranEAID=208164&ranSiteID=lw9MynSeamY-K5a8Y4hru58bJ0kz7z4rkA
Or
www.newegg.com/g-skill-16gb-288-pin-ddr4-sdram/p/N82E16820232766?Item=N82E16820232766&sdtid=12815956&nm_mc=AFC-RAN-COM&cm_mmc=AFC-RAN-COM&Slickdeals%20LLC&AFFID=208164&AFFNAME=Slickdeals%20LLC&ACRID=1&ASUBID=37f831ac3e2211eaa25ac695055d12510INT&ASID=https%3a%2f%2fslickdeals.net%2ff%2f12815956-8gb-g-skill-aegis-ddr4-2666-desktop-memory-module-41-16gb-72-ac-newegg-16gb-2x-8-ripjaws-v-ddr4-3000-81-ac-32gb-sniper-kit-171-ac%3fsrc%3dSiteSearchV2Algo&ranMID=44583&ranEAID=208164&ranSiteID=lw9MynSeamY-g3wyClqftM4ZgjNLJyIraQ
CuriousITech does the motherboard support dual channel?
@@Kamoitg Yes, it does
@@curiousitech9807Can someone buy one of brand 8GB you recommend to give computer total of 16GB? Or should buy two 8GB of your recommended brand to replace old memory that came with the PC?
@@jaego24 It's best to be the same specs
just got this computer and its so SMALL, considering the nice graphics cards it has, it worries me about how well it will cool and if the PSU can handle it
I had no problems with the PSU but the stock coolers are not the best. The temp goes over 70 C on high power tasks like rendering 4K videos and the noise at high revs is bothering me. Just ordered some Noctua fans and cooler, hoping for lower temps and noise. I'll update with the results...
I have a question I hope you can help me with. Can you give me the internal length inside the case or the size of that graphic card? I’d like to know what is the largest graphics card that can fit inside.
The size of the graphic card is approximately 6 x 4 . It looks that you can fit a max 7 x 5.
CuriousITech Thank you 👍
What’s all I need to get to upgrade the ssd? Also great video!
you can go with a bigger capacity M.2 NVMe but you'll have to reinstall windows or the easier and cheaper way by getting a SATA SSD as you can see on the video.
CuriousITech okay thank you! Just any sata ssd will work? And one last question what else do I need to buy to install it?
@@isaiahhall2058 Any SATA SSD would work. All you need are the screws, my Samsung Evo did not come with them. The good part is that this unit has the SATA and power cable waiting for a new SATA SSD inside.
CuriousITech thanks ur the absolute best. Keep up the great content !
@@curiousitech9807 My desktop (690-0020) is very similar but has a HDD with an empty M.2 slot. Would I need to still reinstall windows to use to use the M.2?
is there a link for the motherboard have the same pc and was thinking of moving it all into a nicer case but have no info on the motherboard.
support.hp.com/us-en/document/c05991291
Where were the other M.2 expansion ports?
It's just one for the NVMe SSD. What are you looking to do?
@@curiousitech9807 just add another m.2 SSD I purchased. Its a little annoying that on the specifications page it says there are 2x M.2 slots available under "Expansion Slots". I guess I'll buy a enclosure
@@TheIonious The second one is shorter (30 mm) and is for WLAN
CuriousITech guess I should’ve researched better
@@curiousitech9807 Was there an open PCIE expansion slot available? Currently looking at this www.amazon.com/YATENG-Controller-Expansion-Card-Support-Converter/dp/B07JJTVGZM/ref=sr_1_4?dchild=1&keywords=pcie+m.2+adapter&qid=1595150219&sr=8-4 and was wondering if I could install this on the pavilion in lieu of a 2.5 enclosure.
Not have idea need the exact same ddr4 no to put additional 8gb of ram or is possible use another 2 8gb ram for example G.Skill ddr4
If you are adding a new pair, then you can use whatever you want. G.Skill would be just fine.
How do i change the speed man
The MB does its job automatically
can someone tell me what video card he has on stock power supply.. I cant understand his voice
Did the mounting screws for the ssd come with it?
No, it didn't. You would need to get them separately. The specs are M3-0.5x4 or 5. M3 is the diameter, 0.5 thread size and 4 or 5 mm lenght.
CuriousITech ok thanks
When installing the sdd is there two more extra cords like the sata cord and power cord?
And can u link a good sdd 2 tb for it?!
Yes, they should be attached to the bay/cage.
@@isaiahhall2058 www.amazon.com/Samsung-Internal-Corsair-Mounting-CSSD-BRKT1/dp/B07RHBYS4S
CuriousITech dude you have helped me so much! I am extremely thankful! Keep up the great work and thanks for your time
@@isaiahhall2058 You are welcome. Please subscribe
Can I add a SATA ssd??
Of course. You can see that in the video
@@curiousitech9807 thanks I thought that there were differences between nvme and SATA but this is completely different
Is it proprietary PSU? Will it create problems for upgrades?
It is, and it will.
i maybe late but the psu is fine for most upgrades u can max the gpu but i think only up to a rtx 2060
Can you upgrade the graphics card?
mbisoh yeah but you don’t really need to it’s great
mbisoh and it might be hard cause of how small the pc is
Alex Pelton do u know how much storage this pc has?
256 gb of storage
Alex Pelton that’s wow! Thank u tho
Hey man. I was wondering what the power supply is like on this?
400 W
CuriousITech ok thanks
Can I use a mounting bracket for the ssd I just ordered an ssd and a mounting bracket for the screws
You don't need a mounting bracket. As you can see in the video you can attach the ssd to the metallic cage /bay.
Ok thanks I ordered a WD Blue 3D NAND 1TB Internal PC SSD - SATA III 6 Gb/s, 2.5"/7mm, Up to 560 MB/s - WDS100T2B0A I hope it fits
@@SADBoilul That's a great ssd. It will fit easily.
CuriousITech thanks good to know
Texas Stargazer it’s great the ssd is working fine I load into games even faster. I highly recommend it it fit perfectly for me
What should I have if I want it to be better at gta 5
the nvme ssd that comes with the 690-0073w is only x2, does the motherboard support a x4 nvme ssd like the samsung 970? Will the samsung nvme ssd run at x4 speed or only x2? thanks
you'll get speed up to 1600MB/s which is only x2
@@curiousitech9807 Based on HWINFO the slot is PCI Express v3.0 x4. Why is the speed capped to 1600MB/s?
@@gustavoromero2089 HP capped this M.2 slot to 2x
PCI Express x4 Bus #4 -----------------------------------------------------
Hynix Semiconductor, Device ID: 1327 --------------------------------------
[General Information]
Device Name: Hynix Semiconductor, Device ID: 1327
Original Device Name: Hynix Semiconductor, Device ID: 1327
Device Class: NVMe Controller
PCI Address (Bus:Device:Function) Number: 4:0:0
Hardware ID: PCI\VEN_1C5C&DEV_1327&SUBSYS_00001C5C&REV_00
[PCI Express]
Version: 3.0
Maximum Link Width: 2x
Current Link Width: 2x
Maximum Link Speed: 8.0 GT/s
Current Link Speed: 8.0 GT/s
Device/Port Type: PCI Express Endpoint
@@curiousitech9807 Thanks!. I might be wrong but I believe you listed the features of the Hynix m.2 SSD itself (which is definitely x2). The features listed under the "Intel Cannon Lake-H/S - PCI Express Root Port #9 [B0]" (the m.2 mobo slot) show Max=4x and Current=2x (this is the Hynix SSD). I guess the only way to know for sure is to have someone posting some benchmarks after the upgrade to a NVME x4 SSD.
General Information
Device Name: Intel Cannon Lake-H/S - PCI Express Root Port #9 [B0]
Original Device Name: Intel Cannon Lake-H/S - PCI Express Root Port #9 [B0]
Device Class: PCI-to-PCI Bridge
Revision ID: F0 [B0]
PCI Address (Bus:Device:Function) Number: 0:29:0
PCI Latency Timer: 0
Hardware ID: PCI\VEN_8086&DEV_A330&SUBSYS_00000000&REV_F0
PCI Express
Version: 3.0
Maximum Link Width: 4x
Current Link Width: 2x
Maximum Link Speed: 8.0 GT/s
Current Link Speed: 8.0 GT/s
Device/Port Type: Root Port of PCI Express Root Complex
The m.2 slot is definitely 4x, I just installed an EVO plus and the results are
Sequential Read (Q= 32,T= 1) : 3517.121 MB/s
Sequential Write (Q= 32,T= 1) : 3217.411 MB/s
What’s the storage on this please help me I need to know
There is a description of the storage in the video
Is there any way to upgrade the PSU to a 500w?
This is a proprietary HP power supply, so it won't be easy but it's possible. The dimensions are 6.5" x 3.75" x 2.875".
yes you can.
does it have to be SSD?
No. HDD would work just fine.
dude we have literally the same PC and im loving it! do you think i can change the stock fan and cpu fan (fan only)?
and do you think i can add another 80mm intake fan below your installed ssd card?
Yes, you can. The case stock fan is 90 mm x 90 mm x 25 mm and the cpu fan is 80 x 80 x 25.
@@UragonAko123 It would be easier to install another intake fan if you remove completely the drives bay/cage and only use the PCIe NVMe M.2 SSD for storage.
@@curiousitech9807 what aftermarket fan would you recommend? tbh im new to this kind of stuffs. thanks
thank you bro. maybe ill change the exhaust fan to noctua 92mm with 2500rpm max and but ill change the cooler and the fan. but idk what will fit, any recommendations?
For cooling upgrade watch : ruclips.net/video/KIm0SHtfErw/видео.html
Just got that pc
Would this hard drive fit in the bay? If so which screws would I need? www.amazon.com/Seagate-BarraCuda-Internal-Drive-3-5-Inch/dp/B07H2RR55Q/ref=sr_1_3?dchild=1&keywords=hard+drive&qid=1595929886&s=electronics&sr=1-3
Yes, it does fit. Usually the screws are #6-32 for a 3.5" HDD.
hi, where can i get the screws to install the hdd/ssd??
Got them from Home Depot. The specs are M3-0.5x4 or 5. M3 is the diameter, 0.5 thread size and 4 or 5 mm lenght.
@@curiousitech9807 How many sata connectors are available?? I already added an additional SSD and wondering if possible to add another HDD.
@@kwantocheung8126 there are 3 of them. One for the DVD and 2 for hdd/ssd's.
@@curiousitech9807 thank you so much!!
got mine for 400 and the graphics card and proccesor r worth more than that😂
Grant Parsons sadly here in Cali from what I’m seeing it costs 620 dollars rn ;c lucky
Same I’m about to buy one from Walmart and if you go on the app you have to look a bit and then it says 399 and I thought it was fake.
Yeah it was a hell of a deal , got a buddy that snatched it at 700 wich i will say its full priced
it s possible upgrades the power supply to high?
This is a proprietary HP power supply, so it won't be easy but it's possible. The dimensions are 6.5" x 3.75" x 2.875".