We got sick of cleaning, scrubbing grout, tiles, so went with a flex stone walls in our shower remodel in the master bedroom which gets the most use. The other 2 bathrooms in the house have tile though, they don't get much use other than family a couple of times of year. I wanted the space my husband and I use daily to get easy to clean surfaces as we age, and since he does the remodels himself, this made his life easier too lol.
I'd get the rest of them done anyway. Personally I'll be having a dome home built. But if choosing a four wall dwelling, if only 1/X bathrooms has the easy clean feature, it's an automatic no.
never….. only rookies IGNORE the “slip co-efficient” INTELLIGENTLY applied to ANY walking foot traffic including tile floors inside or outside, steps & staircases, restaurant floors or commercial public use to AVOID injuries, lawsuits, the impracticality of NOT SPECIFYING non-slip surfaces.
I have to say you actually showed 3 types. Dekton Ultra Compact handles much the same as porcelain, and that is from someone handling both since 2014. My guess is you use Dekton a lot in your day to day business. But the tooling for dekton slim is the same as porcelain. The only difference from a consumer standpoint is the way they are made at the factory.
That's a fair comment--they are very similar. Some of the thicker porcelain I've encountered required different tooling and installation due to the thickness. Do you find that you prefer one or the other?
@@DesignBuildRemodeling I would much rather work with 1/4" (6mm) over any other thickness. the 1/2" (12mm) is far too heavy and dense but is made for granite companys that have no clue how to handle tile. That could be an issue for a homeowner as the install might be suspect to proper technique. 3.5mm is very easy to crack and is not forgiving at all. Requires absolute need for the suction systems. Give me 4 suction cups, and 1/4" material all day long.
Thank you for the excellent video and insightful comparison! I have a specific question regarding a bathroom remodel I am undertaking in a house experiencing foundation movement. The frequent shifts have caused the grout joints to crack, and occasionally, even the silicone joints exhibit minor gaps along the vertical lines. To mitigate these issues, I'm considering groutless solutions, particularly the slabs you discussed. In my renovation plan, I intend to incorporate the Schluter-KERDI waterproofing system, alongside the Schluter-DILEX-BWA Movement Joint, which functions as an expansion joint/perimeter joint to prevent vertical joint cracks. My question pertains to compatibility: of the four slabs you reviewed, which ones can be effectively utilized in conjunction with the Schluter movement joint and KERDI waterproofing system? Thanks in advance!
Hi, can you please explain about slab transportation, lifting and how the people transport it on the elevator without cracking, the problem with it's weight etc... . I live in an apartment building,and there's a size of elevator. What's the solution for apartment living and trying to buy big slabs for bathrooms, kitchen island ? Nobody does this type of information on RUclips so far. Thanks in advance. 😊💕
That is a great question! Often, you could use a crane to lift the slabs onto a patio if there was still a crane on site when the apartment was being built--otherwise, you're left with having to use a product that can fit though the halls/elevator/stairs up into the apartment.
What about slab that you can bond together with NO JOINTS....Corian use to call the seams a "hot joint" used on kitchen counters and the back splashes...all joints disappeard
Good information, but need visual examples of the materials. Have no idea of 2 of the components you talked about. Seeing the finished BR doesn't suffice.
We like them for the price point but insist on using a waterproof backer when we do the install. A stone type product is always better, but not everyone can afford that.
Tile and grout really is not ideal for a shower. And as a consumer without a maid, I'm not a fan of niches and shelves that tend to require more cleaning and maintenance than a clean, smooth wall. I wonder why laminates and products like Wilsonart's WetWall are not mentioned in your video? I am not a shill for them, and don't really care for the less than glossy WetWall surface, but I have seen showers built with simple laminate that seem to have held up well. No profit in those? Too much labor to build well? What gives? So many pattern options in laminate.
That's a great point! We use a waterproof Laticrete grout that doesn't require sealing in order to counteract some of the disadvantages of an older concrete grout. However, slabs are better! Check out this video that shows you some different slab options: ruclips.net/video/spOvQJBhLx0/видео.html
@@lysias55 Not sure what you're asking specifically. What does soap dispensing have to do with shower grout vs laminate options? If you are referring to the lack of 'cubby hole soap shelves' in laminate, that's actually a good question -- and I consider it a plus! Fewer potential leak points, less place for water, soap scum & mold to collect etc. As to specific alternatives to the soap shelf cubby holes, the options are nearly infinite. You can mount soap hangars on walls (stick on or screw mounted & sealed), hang after-market hangars from the shower head, use double faced adhesive mounted liquid soap dispensers that attach to the wall, or if it is a bathtub shower enclosure, just set the soap containers on the rim of the tub. Liquid soaps & shampoos are better that scum producing bar soaps when it comes to keeping a shower clean by the way. Hope that helps.
@@DesignBuildRemodeling i saw it on youtube, i dont think anyone in my country makes those, but it looks cool and they have very good properties meaning you cant break them like ceramic ones and it is cheaper to make, so may be interesting to use.
Should there be any issues with completely waterproofing behind granite slab for a shower. My plumber had placed the Koehler main valve in front of the 2x4 and wants to leave an exposed 2x2 feet opening behind the slab. How is that waterproofed. Please advice. I’ve stopped the work completely.
Thank you for responding. I would like to place hydroban sheet membrane on top of my hardiback and then place the granite slabs. Due to the fact that my plumber has a pressure valve and the copper tubing on top of a 2x4, I can not place the hardiback nor the hydroban sheet membrane around the valve. He expects me to leave a 2 ft by 2ft exposed opening without hardiback and hydroban sheet membrane. Do you see being a problem because by doing it his way the shower will never be completely waterproofed. I appreciate your time for your response. Thank you.
@@DrPippo1234 Got it. I'd default to what the membrane manufacturer's instructions are. Typically that would not be allowed--if you are using Schluter Systems you could contact the local sales rep. Typically you'd cut around the membrane just enough for the valve and the pipes would run behind the membrane.
Waterproofing should never be broken or interupted, especially behind a material that can absorb and secrete liquid like granite. The waterproofing should always run right up to the fixtures, and if possible, utilize a rubber collar like those found in the schluter shower system. a good waterproof system contains the entire shower like a bowl. Everything must go to the bottom drain.
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
Thank you. That was very informative.
Very informative. Nice presentation.
We got sick of cleaning, scrubbing grout, tiles, so went with a flex stone walls in our shower remodel in the master bedroom which gets the most use. The other 2 bathrooms in the house have tile though, they don't get much use other than family a couple of times of year. I wanted the space my husband and I use daily to get easy to clean surfaces as we age, and since he does the remodels himself, this made his life easier too lol.
I'd get the rest of them done anyway. Personally I'll be having a dome home built.
But if choosing a four wall dwelling, if only 1/X bathrooms has the easy clean feature, it's an automatic no.
If it's easier to clean than tile, then it's a win.
Definitely!
Easy fix for the niche con, shower stool/chair. Only have to worry about access, thank you.
Are slabs used on the shower floor? I would think slipping would be an issue, but I have clients asking for slab floors in the shower.
never…..
only rookies IGNORE the “slip co-efficient” INTELLIGENTLY applied to ANY walking foot traffic including tile floors inside or outside, steps & staircases, restaurant floors or commercial public use to AVOID injuries, lawsuits, the impracticality of NOT SPECIFYING non-slip surfaces.
I have to say you actually showed 3 types. Dekton Ultra Compact handles much the same as porcelain, and that is from someone handling both since 2014. My guess is you use Dekton a lot in your day to day business. But the tooling for dekton slim is the same as porcelain. The only difference from a consumer standpoint is the way they are made at the factory.
That's a fair comment--they are very similar. Some of the thicker porcelain I've encountered required different tooling and installation due to the thickness.
Do you find that you prefer one or the other?
@@DesignBuildRemodeling I would much rather work with 1/4" (6mm) over any other thickness. the 1/2" (12mm) is far too heavy and dense but is made for granite companys that have no clue how to handle tile. That could be an issue for a homeowner as the install might be suspect to proper technique. 3.5mm is very easy to crack and is not forgiving at all. Requires absolute need for the suction systems.
Give me 4 suction cups, and 1/4" material all day long.
Can we get more info on the kitchen cabinet in the back of the video?!
Can you use any of these options over a fireplace to get the single slab look?
How about the engineered stone slabs?
I put engineered stone on my shower walls 20 years ago. Still looks like the day I put it in.
Which brand and how do you clean it
Thank you for the excellent video and insightful comparison! I have a specific question regarding a bathroom remodel I am undertaking in a house experiencing foundation movement. The frequent shifts have caused the grout joints to crack, and occasionally, even the silicone joints exhibit minor gaps along the vertical lines. To mitigate these issues, I'm considering groutless solutions, particularly the slabs you discussed.
In my renovation plan, I intend to incorporate the Schluter-KERDI waterproofing system, alongside the Schluter-DILEX-BWA Movement Joint, which functions as an expansion joint/perimeter joint to prevent vertical joint cracks. My question pertains to compatibility: of the four slabs you reviewed, which ones can be effectively utilized in conjunction with the Schluter movement joint and KERDI waterproofing system? Thanks in advance!
This was super helpful thank you
We're glad to hear that!
Hi, can you please explain about slab transportation, lifting and how the people transport it on the elevator without cracking, the problem with it's weight etc... . I live in an apartment building,and there's a size of elevator. What's the solution for apartment living and trying to buy big slabs for bathrooms, kitchen island ? Nobody does this type of information on RUclips so far. Thanks in advance. 😊💕
That is a great question! Often, you could use a crane to lift the slabs onto a patio if there was still a crane on site when the apartment was being built--otherwise, you're left with having to use a product that can fit though the halls/elevator/stairs up into the apartment.
Is there a PVC product that has subway tile designs? I've stayed at a number of hotels lately that are using what looks to me like a smooth PVC.
Yes home centers carry these. Flexstone, and wetwall by Wilson art I believe are two option.
What about slab that you can bond together with NO JOINTS....Corian use to call the seams a "hot joint" used on kitchen counters
and the back splashes...all joints disappeard
Good information, but need visual examples of the materials. Have no idea of 2 of the components you talked about. Seeing the finished BR doesn't suffice.
You sound just like owen wilson
😂😂
I can’t not hear it now.
ha! He really does sound similar.
Wow
Tom Brokaw
Very informative. Thank you,
Glad it was helpful!
Obe of tge vest real opinions about the slab Showers idea.😊
can you just do groutless tiles - so it looks like a slab but cheaper?
Sounds like you’d save on material but regain cost in labor
What is your opinion on composite “slabs” like Wilsonart WetWall?
We like them for the price point but insist on using a waterproof backer when we do the install. A stone type product is always better, but not everyone can afford that.
Thanks for the information. I think it's "lit" and not "lighted".
Thank you
You’re welcome!
Tile and grout really is not ideal for a shower. And as a consumer without a maid, I'm not a fan of niches and shelves that tend to require more cleaning and maintenance than a clean, smooth wall. I wonder why laminates and products like Wilsonart's WetWall are not mentioned in your video? I am not a shill for them, and don't really care for the less than glossy WetWall surface, but I have seen showers built with simple laminate that seem to have held up well. No profit in those? Too much labor to build well? What gives? So many pattern options in laminate.
That's a great point! We use a waterproof Laticrete grout that doesn't require sealing in order to counteract some of the disadvantages of an older concrete grout. However, slabs are better! Check out this video that shows you some different slab options:
ruclips.net/video/spOvQJBhLx0/видео.html
Do you just use a shower caddy to carry soaps in each time?
@@lysias55 Not sure what you're asking specifically. What does soap dispensing have to do with shower grout vs laminate options? If you are referring to the lack of 'cubby hole soap shelves' in laminate, that's actually a good question -- and I consider it a plus! Fewer potential leak points, less place for water, soap scum & mold to collect etc. As to specific alternatives to the soap shelf cubby holes, the options are nearly infinite. You can mount soap hangars on walls (stick on or screw mounted & sealed), hang after-market hangars from the shower head, use double faced adhesive mounted liquid soap dispensers that attach to the wall, or if it is a bathtub shower enclosure, just set the soap containers on the rim of the tub. Liquid soaps & shampoos are better that scum producing bar soaps when it comes to keeping a shower clean by the way.
Hope that helps.
There are also costum concrete slabs
That’s true. We don’t see those much here in the Pacific Northwest.
Do you see those where you are?
@@DesignBuildRemodeling i saw it on youtube, i dont think anyone in my country makes those, but it looks cool and they have very good properties meaning you cant break them like ceramic ones and it is cheaper to make, so may be interesting to use.
Should there be any issues with completely waterproofing behind granite slab for a shower. My plumber had placed the Koehler main valve in front of the 2x4 and wants to leave an exposed 2x2 feet opening behind the slab. How is that waterproofed. Please advice. I’ve stopped the work completely.
Thanks for asking the question! I'm not sure I entirely understand it though--what waterproofing system is behind the granite?
Thank you for responding. I would like to place hydroban sheet membrane on top of my hardiback and then place the granite slabs. Due to the fact that my plumber has a pressure valve and the copper tubing on top of a 2x4, I can not place the hardiback nor the hydroban sheet membrane around the valve. He expects me to leave a 2 ft by 2ft exposed opening without hardiback and hydroban sheet membrane. Do you see being a problem because by doing it his way the shower will never be completely waterproofed. I appreciate your time for your response. Thank you.
@@DrPippo1234 Got it. I'd default to what the membrane manufacturer's instructions are. Typically that would not be allowed--if you are using Schluter Systems you could contact the local sales rep. Typically you'd cut around the membrane just enough for the valve and the pipes would run behind the membrane.
Waterproofing should never be broken or interupted, especially behind a material that can absorb and secrete liquid like granite. The waterproofing should always run right up to the fixtures, and if possible, utilize a rubber collar like those found in the schluter shower system. a good waterproof system contains the entire shower like a bowl. Everything must go to the bottom drain.
@@porcelainpanelpro Well said👍👍
No/minimum grout means yes pls.
I love it!
I have installed about 12 cultured marble showers this year. What is so different about this product?
I think cultured marble would fit into the acrylic category. I hear it's still popular around the states, but not as much in the Northwest.
You sound like Tom Brokaw.
😂