@6:20 I thought I was the only one that was vain enough to have my Odyssey rim decal all lined up with the Schrader Valve, plus the bike brand on my tires 😂😂😂! Mr. Dicecap's small circle of friends is Mr. Odyssey and Gary Turner🤓👍.
Jesus Christ lived a sinless life. Died on the cross. Rose from the dead three days later so you can have eternal life. You just have to accept his gift of salvation. Repent from your sins and surrender your life to him. Jesus Christ for eternal life. God Bless! !! 7:17
I just had a problem with my inner tube. My tire is a 20X1.85 and the inner tube was 20x1.75. I don't know if it was ever replaced but should the inner tube be smaller than the tire or should they be the same size?
Inner tubes fit a range of width tires. Most tubes are marked maybe 20x1.75-2.125. This means the tubes will fit a tire in that size range. Inner tubes are basically ballons that stretch to fill the space inside the tire. Anything close in size like 1.75 and 1.85 is fine together.
Tire pressure is more of a personal preference, some like low pressure 35-45 psi to reduce vibration, and offer a larger foot print on the ground for balance, some like higher pressure 65+ PSI, rolls fast and slides easy. I would recommend trying different pressure with different tires to help dial in what you'll enjoy.
that intro is literally just so these guys arent liable when some do-do head fucks there bike up. honestly. the only time I would get some pro help or help from someone in general is when truing your spokes on the rim. that can be truly a PAIN IN THE ASS
Bmx maintenance is sooo much easier than mountain bike maintenance
Ong
That’s why I switched
SuprZena oh my god yes
about the same really. just a little extra work
Saved me an hour off hassle. Thanks bro 😎
@6:20 I thought I was the only one that was vain enough to have my Odyssey rim decal all lined up with the Schrader Valve, plus the bike brand on my tires 😂😂😂! Mr. Dicecap's small circle of friends is Mr. Odyssey and Gary Turner🤓👍.
Just bought a cult devotion 2022 21” for my first bike
this is an awesome video man, underrated.
Thanks!
Thx for this. I’d recommend Yamaha yamalube vs triflow (triflow was my goto in the 80’s and there is better stuff now without the bad stuff)
Jesus Christ lived a sinless life. Died on the cross. Rose from the dead three days later so you can have eternal life. You just have to accept his gift of salvation. Repent from your sins and surrender your life to him. Jesus Christ for eternal life.
God Bless! !! 7:17
Thanks for the tips just brought a $400 bike
Q2 Leader what u get
@@jaydenrodriguez7011 i did too, haro for me
Dk sprinter pro here! 36 years old reliving the good ol days
Lovely channel. Subscribed to follow and support. Keep up a good work.
Good video. Thank you.
I just had a problem with my inner tube. My tire is a 20X1.85 and the inner tube was 20x1.75. I don't know if it was ever replaced but should the inner tube be smaller than the tire or should they be the same size?
Inner tubes fit a range of width tires. Most tubes are marked maybe 20x1.75-2.125. This means the tubes will fit a tire in that size range. Inner tubes are basically ballons that stretch to fill the space inside the tire. Anything close in size like 1.75 and 1.85 is fine together.
@@kingsrideshop Thank you so much!
awesome !!!!
where did you get the screw bolts knarps for the break cable that goes on the springfield on each side?
Odyssey makes them cable knarps
Very helpful thank you
What tire pressure would you recommend for street riding?
Tire pressure is more of a personal preference, some like low pressure 35-45 psi to reduce vibration, and offer a larger foot print on the ground for balance, some like higher pressure 65+ PSI, rolls fast and slides easy. I would recommend trying different pressure with different tires to help dial in what you'll enjoy.
@@kingsrideshop Thanks again 🙏
You are right .. I do need a new crank set :D
What bike is this
Would WD-40 work as a lube? I know next to nothing so sorry if this a stupid question
Itll work but its way better to go to walmart or target and some grease, usually like 1-2 bucks
no it dries it out more and it will cause it to overheat
Thanks player
My bike sounds like an old boat with pinch bolts lol
A three piece crank, with am eight tooth spline is way more strong.
A three piece crank, with am eight tooth spline is way more tough.
My bmx does'nt tick when i roll the bike forward, the pedals just go forward, its really annoying
chsin mighg be to tight sprocket might be bent or rear hub has tension
Dude what do you put in that thing 😂
Michal valle 3:29
Danny Dyer on Bikes
that intro is literally just so these guys arent liable when some do-do head fucks there bike up. honestly.
the only time I would get some pro help or help from someone in general is when truing your spokes on the rim. that can be truly a PAIN IN THE ASS
I have that sprocket
using my brakes in the rain kill the paint of my rims... twice
didier de haerne take the brakes off, trust me
I ride 21+ miles on a bmx bike.
A three piece crank, with am eight tooth spline is way more strong.