NEW!! Tekno SCT410 2.0 ✌️ - BUILD REVEAL - I found a FLAW! Everything Needed to Get it Running
HTML-код
- Опубликовано: 4 июл 2024
- Tekno RC is back at it with the Brand New Tekno SCT410 2.0 - the next generation of their 1/10th scale 4x4 Shortcourse truck kit. In this Full Build Reveal, I go over: What's needed to get it fully running including all electronics, body, paint, wheels/tires and accessories. Am I back?
👉 Tekno SCT410 2.0 Pricing: bit.ly/3S0XKud
👉 All Tekno SCT410 2.0 Videos: bit.ly/SCT4102Point0Playlist
Items mentioned in this video👇
JConcepts Body: bit.ly/3twXR6l
Tamiya Dark Metallic Blue: bit.ly/45OgTTr
Tamiya Black: bit.ly/3tCusI3
JConcepts Subcultures: bit.ly/3tw1zND
Tekno SCT Wheels: bit.ly/3tE8GDW
Tekin Pro4HD 4300kv Motor: bit.ly/3M2znIL
Tekin RX8 Gen 3 ESC: bit.ly/3M0TQgM
Tekin 3 Wire Separator: bit.ly/TekinWireClamp
Tekin Bullet Grips: bit.ly/TekinBulletGrips
ProTek RC 170SBL Servo: bit.ly/3txko38
ProTek RC 8600mah 2s LiHV: bit.ly/45Arv8j
Avid RC 16t Pinion Gear: bit.ly/Avid16T
Futaba Radio System: bit.ly/3Q07Fx9
✦Connect with The RCNetwork✦
Instagram: / the_rcnetwork
Facebook: / theofficialrcnetwork
Visit The RCNetwork's Amazon Page:
www.amazon.com/shop/thercnetwork
✦My Video Gear✦
Studio Camera: amzn.to/2D5oVzB
Studio Tripod: amzn.to/3011Jv4
Studio Lights: amzn.to/2OZaCPO
SD Cards for Studio Cam: amzn.to/2OZWKVa
Lavalier Mic: amzn.to/2Edhvur
Studio Mic: amzn.to/39vxhfO
Action Camera: amzn.to/2EjqYAt
Favorite RC Tools: bit.ly/2QHyA2Y
#thercnetwork #rc #radiocontrol #teknorc #tekno #sct4102.0 #rccar #rccars #remotecontrol #hobby #rchobby #rcracing #rctrucks #rcnews
“TheRCNetwork.com is a participant in the Amain Hobbies Affiliate Program and the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amain.com and Amazon.com.” 
Авто/Мото
I'm so happy to see you doing videos again! Awesome!!
Thanks buddy! 4 videos dropped today - check them out!
Building Now, Half way through. About to open Bag K and mount the same 2s system you displayed, Tekin RX8 Gen3 w/ Pro4 HD Redline Motor and 16t Pinion. Gonna try her with the new RadioMaster MT12 with ExpressLRS. Also built her with Carbon Fiber front and rear shock towers. Stock rear tower weight is 1.2oz, Carbon Fiber rear weighs 0.6oz, that’s half cut in the front and rear. Purchased front and rear Skid Plates, add a little lower Cg weight.
Nice! It’s a great truck and great build. Enjoy!
Welcome Back Rich, good to see you making videos again. Watching all the videos you uploaded.
Nice! Thanks for stopping by!
Glad you're still making videos Rich! Thanks
Thanks Jonny! It's fun to film these trucks
Welcome back hope all has been going well! love the build super clean as always!
Thanks buddy! It was a fun build. 4 videos released today - check them out!
Great to see you doing videos again. I always love watching your channel you got great content and lots of information . I agree on that motor mount I don’t like it but it’s a great looking rig and you always do some very nice clean builds 👍🏽🤙🏽😁
Thanks buddy! I've always tried to provide the best view of the RC vs. myself. I agree on the truck - its good looking and drives great!
Been out of r.c for 6 years. Getting back in as a basher at first. Kit arrived today. Just put in orders for parts. Running your Protek servo choice with the Flo Tek body. Painting it with the Tamiya paints and the Pro Line mask. Thanks Rich for helping us onboard. Nearest track 1 hour away so plan to bash it mostly. Bought the body mounting kit from Tekno. Plan to run 2s with the 4300 motor and their think Gen2 Esc.
Glad to help buddy! If you have any questions, just ask!
All enjoyment watching your videos❤ every time great style📹🎬 so thankful 🙏 taking the time showing an explaining so much 🙌
Thanks buddy! I truly appreciate the kind words. 4 videos dropped today...make sure and check them out!
I'm happy to see you doing more race oriented videos for a good videos. That's all we dabble in. Especially the kyosho video. I loved it even though it was an RTR
Thanks! Tekno make great RC's and it's hard to pass up a new truck from them.
Thanks for the video. I'm getting mine in April for some local New England 2S racing and it gave a lot of great info.
Nice! Enjoy building and driving!
Flaw: 8:18
They will probably release a sliding motor mount for easy gear mesh adjustings.
I kind of doubt it. It would require removing the cover and modding the side guard to get the motor in and out. There’s team drivers already modding it this way with the EB48 2.1 mount
Nice to See you again 👍
Thanks buddy!
Great job man it looks rad
Thanks Jonny!
ur back!!!!! Yay
Kinda....but only for a fun truck like this one!
4 videos today! wow when you come back you really comeback!🎉😊
Thanks! nearly 45 minutes of finished video. Over 200GB of unedited footage to make these!
So is the esc and motor chose good for the weight of this truck? I love the build direction you went for. Just confused with what electronics to go for. Read all the comments here and between Tekin and hobby wing.
It's ideal IMO - If you're racing it's one of the best options for SCT. If I were just bashing, I would swap out the 4300kv on 2s for a 3000kv on 3s. The 3s system will be better and less stress on everything vs. the 2s system (especially the batteries). Between Tekin and Hobbywing, I always prefer Tekin for my 1/8th scale systems like this one. For 1/10th scales (like buggies) I prefer the Hobbywing
That's a beautiful setup bro!!!
Thanks George, I appreciate the kind words
wow, going to sell my slash ult and buy this babe :)
You will be amazed on the difference.
Looks so nice! Upgraded from Traxxas to AE for racing. Tekno will be my next victim.
I'll tell you, going from AE to Tekno will be a huge difference....what I noticed is that the kits go together so much better. No missing parts and the directions are so much clearer. Also, durability is great with Tekno
My build : Max8 g2, 4268g2 2500kv, 20 tooth pinion gear, 4s, proline badland SC. Love my new build. Great improvement from the sct410.3. Waiting for the airguards (a must have on the sct410.3)
Nice! that's some serious power...keep track of that driveline and report back how it does with constant 4s power!
You are back! Really miss your videos.
Yep, I'm back. Not sure how often I'll post, but when I see cool RC stuff, I'll be there!
It’s been a minute since you posted something awesome truck
It sure has! over 2 years now....4 videos dropped today - check them out!
Would you do a video on what you would use to build a U4 racer with the kits and parts Tekno has now? The DB 48 had some great mods and engineering, but that kit is no longer available.
I haven't looked lately at converting a DB48 "2.0" with the new gen's from Tekno. When I built the original DB48, the main issue I had was keeping the 12mm hexes, as that was the only option at them time for racing as 17mm hexed wheels were not allowed....or would even fit. Now, with 17mm hex wheels being allowed and now available, I would start with the EB48 2.1.....and add the ET48 2.0 chassis to start. I would ask Tekno directly as they probably already know the answer...or have had people ask
Big fan of Tekin. Still using an RX8 G2 in one of my Losi TLR SCT's. Kinda treat my Tekin gear with kit gloves as theyre so tricky to source in the UK
Ah, cool! Yes, Tekin stuff is great...and always my goto for 1/8th scale.
Awesome video! I disagreed on 1 part though. SCT had always been great, people just seem to have forgotten. But i do get your point anyways. SCT is my favorite to drive, any and all!
SCT was my first love of RC - the Traxxas Slash 4x4 in 2010. Then got an SCTE, well actually 3 of them....then the original SCT410. I've probably had about 20+ SCT's (mostly RTR's) over the years....but the Tekno has always been my favorite. The 2.0 easily trumps the 410.3
@@TheRCNetwork the new tekno really is kind of the best of all the well known SCT's out there all in one. It's nice like a Traxxas, race ready like a losi or a TA, tough and fast like a Senton BLX. All in one truck. Very impressive!
I can't agree more.
Nice. I have a 4600kV and had to put a 16t on it since, you know, it won't accept anything less (even though it says a 15t). We're going to have to hit up Huckleberry for a play date!
Agreed! Let me know
Would you consider this a better platform for a DB48 conversion?
Loaded question there. It quite possibly can be, but it would need to also work with the ET48 2.0 parts, which hasn't been tested yet. Just considering the motor mount, I doubt that the SCT410 2.0 and ET48 2.0 would match up let alone all of the other parts - chassis braces, driveshafts, etc. One thing to consider now though is the EB48 2.1 as a starting platform as the ET48 2.0 should fit. When I built my original DB48, the major issue was having 12mm hexes for the current (2017) line of wheels and tires available. Now, there are 17mm SCT wheels and SCT Hyrax tires available.
Hey, Rich is back with another vid!
Yep, 4 videos dropped today...check them out!
@@TheRCNetwork found out already and watched 😄
I have a spare lrp dynamic 10L motor. 😅😅 Would go nicely in one of these wouldnt it.
Might go well....
Loved the video. With your motor and ESC. Could I use a Spektrum Smart Battery 2s Lipo in that same setup as yours? Thanks. Scott
Yes, you can....but the "smart features" will not operate. You can just solder a regular plug onto the ESC (I believe your battery has an IC5 connector....the EC5 will be the non-smart version)
Thanks what kind of charger do you use with that style battery you have for bullet connectors?
I use the Team Orion Touch Duo charger...with 5mm bullet leads
Do you know if 410.3 and SL bodies will fit? The SL body worked with my 410.3 so maybe it will fit the 2.0
Most SCT bodies will fit. I'm running the JC Illusion Hi Flow. It fits pretty good
@@TheRCNetwork Thanks! I was more thinking of body hole alignment, I have a brand new body for the SL and 410.3 (holes already in) would be nice if it would fit the new 2.0
Maybe? I know in the owners manual, they state the older body posts also fit (or maybe they have a new part number for the SCT410 2.0) - you remember the ones that had several different offset posts? That could correct the issue if there is one.
That would be great if the old bodies will fit. Working on the build now hopefully will know soon! Thanks! Keep making sweet vids!@@TheRCNetwork
Very nice
Thanks for watching! 4 videos uploaded on Tuesday - check them out!
@@TheRCNetwork Kool will do
Great video, thanks. Just starting my build. I am leaning toward running a HW EZ run max 10 2400 KV motor with an 18 pinion on 3 s with the option of trying 4s down the road. Do you think I would be better off with the HW 3200 KV with the optional motor mount? Not racing, just for fun and bashing…
Two things….1. the Max 10 ESC might not be enough ESC for this truck (she’s heavy….the truck that is) better check what it’s rated. The 2400 will be quite slow on 3s…..even with an 18t. The sweet spot for 3s is usually 3000-3200kv, but you’ll likely need that other motor mount to get a 15t on there
Great, thanks for the advice. I will re think my set up. 👍🏻@@TheRCNetwork
You were nice enough to answer my last question so here I go again. I would like to stick with a Hobbywing combo as I have been loving them in my crawler builds. Do you think an EZrun Max 8 G2 combo or Xerun XR8 Pro G3 combo would be a good fit? I do like that the EZrun version is water proof. Thanks, Mike. @@TheRCNetwork
If I were building it with Hobbywing, I'd put the XR8 Pro G3 and the 3660 3200kv motor in it on 3s. If I were to do the EZrun, it would be the Max8 combo - 2500kv...but it's slightly out of the sweet spot for 3s and will run hot on 4s. You can mess with gearing to compensate...but keep in mind, the stop set up is designed for 2s weight. If you start adding a 4s brick, 4268 motor, etc....the suspension will be pretty soft, diff fluids slightly off.
Thank you for that. XR8 it is. 👍@@TheRCNetwork
Totally agree on the fixed motor mount. It should not be on a high end kit like Tekno. Arrma 3s line even changed from the fixed motor mounts 😂
Yeah, I didn't expect to see this on a Tekno. They pride themselves on race-born vehicles. I bet their drivers hate this design as well...but all my opinion.
the correct size pinion is M1 or M0.8?
Mod 1 for the pinions on this
I want to build one. 2s
Build it the way I did - it's pretty much a race truck on 2s
I like the rx8 esc, but the switch is the worst. I really wish theyd replace it with a button switch like the hobbywing
I've found the Hobbywing button switched to get clogged with fine sand.....they're not perfect either
I’ve got waterproof switches on all my wet weather bashers. They are great! Yes I’m using hobbywing and hobbywing clones
Man haven’t seen you for a while.
Neither have I! lol.
👍🏾
Thanks buddy! I appreciate you stopping by! 4 videos dropped today - check them out!
8:22 is the flaw in the video for anybody scrolling or short on time. It's a small one IMO but it's the motor mount. Take that for what it's worth.
It sure is....and I'm getting all sorts of crap from the Tekno fan boys....and I'M a TEKNO FANBOY!
Overall, great video. Excellent body choice...if I get the chassis kit, I'd be getting the same body.
As for the 'flaw', there really isn't one...at least, not what you're considering as a 'flaw'. The "problem" is having chosen to use such a high kv motor. Most people running this on 2S for bashing will be running a motor closer to 4000kv, thus the pinion range on the motor mount would be considered "accurate". In regards to reaching, most tracks running an SCT class are running 13.5T motors, which is closer to a 3500kv equivalency.
Thanks for watching. The "flaw" was two fold: 1. It proves hard to swap a pinion. With a sliding mount, you loosen two screws and you're changing a pinion. This one, you're removing most of the center section. 2. Pinion choice - for 4300kv 2s, you have 1 choice - 16t. 15t is not compatible with the stock mount. From what I see most SCT guys are running 4300kv 550 or 4600kv 540 - al on 2s. For the 4600, no pinion will work with the stock mount. With that, if I were building a 3s truck, the real sweet spot is either a 3000kv Tekin or a 3200kv Hobbywing.....which puts you in the same boat - nothing will work for the 3200kv and only a 16t will work for the 3000kv. IMO, the 3500kv is too slow for 2s and will run hot on 3s.
@@TheRCNetwork What you ignoring is that, for most tracks running 1/10 SCT outdoors, and all indoor tracks, they're only running 2S. Yes, the truck can be used for bashing. But, it was designed/developed as a competition vehicle...and, as a competition vehicle, it's going to be running a 13.5T motor on 2S - that's what ROAR dictates, so that's what almost all clubs run.
I'll respectfully disagree with you. 1. Tekno designed this as a hybrid truck - can be raced, can be bashed. If it were 100% race, it would have come with adjustable geometry in the box. I spoke to them about this exact thing. 2. I know that there's a 2s rule for Roar...which is why I set it up that way from the beginning. 3. I'd love to see a 13.5t, 2 pole 540 canned motor in this truck. It will literally explode being the truck is nearing 8lbs. BTW, ROAR only dictates voltage (2s) and motor can size (540/550), not turn/kv (at least for the 2023 rules). You might be able to run that 13.5t in the SL or a 2wd, but in this truck....nope.
Dam. I’m in the process of building and can’t decide on the motor and esc. I’m reading all these comments and I’m confused. What combo well be good for the weight of this truck
New here lets jam!
Let's go! 4 videos uploaded this morning....be sure to subscribe!
The crappy thing with SC trucks is they let so much air under the body. Without wheely bars they hit a certain speed and simply flip backwards. Definitely don't try push speeds with a head-on wind.
3s is more than enough for any of these type of RCs
Very true on the bodies.....parachute effect is real!
@@TheRCNetwork vent holes are the answer
@@user-ud5xw8ox8g watch the video, I cover this
Are you back?
For Tekno, I am! We will see though....I had a blast driving last week.....haven't picked up a remote in over 2 years!
Evin if it is just a short stop back ill take what I can get😅 really is cool tho.I think I was just getting into hobby when you started your break😊
Alright 4th to 5th video on this today.
Nice! nearly 45 minutes of edited video! Yay!
OHYEAH в конце єто матюк на русском)
Really?
3s with Tekin gear. 1/8 buggy wheels.
A 3000kv Tekin Pro4HD would be ideal....and yes, buggy wheels for that added momentum
I went with the 3500kv . Great video series …I really enjoyed it.
Nice!
Yea they need to get away from those stupid new motor mounts! If you are at a race and need to switch pinions in a hurry it aint happening! Tekno I know your watching the comments! Stop using these motor mounts!
I 100% agree. I get the business decision for the cost, but this is a kit and deserves at least a fully capable mount. I held off my opinion during the first two videos, but couldn't leave it alone for the third when I realized how much of a pain it will be to swap pinions
The way you leave almost no space between sentences after editing, is that intentional? Is it a style? I hear this quite a lot, and it's jarring. No human speaks that way.
It's all editing style. I've found that a well edited concise 10 minute video does much better (less people falling off) than a 16 minute video with a bunch of silent sections and "uhms"