Armrest in Leather (Jaguar X-Type) - Car Upholstery
HTML-код
- Опубликовано: 19 апр 2019
- ✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
The goal of this small project as component of a Jaguar rear door panel is to reupholster its armrest in dark brown automotive leather including its additional plastic pieces.
We will realize the old armrest cover is useful as a template if it is still in good condition. The OEM cover has two pieces done in vinyl. The idea is to lay these two pieces over a piece of stationery cardboard and try to replicate it adding the required 'seam allowance' and the very important 'sewing registrations'.
To get 'french seams/double stitches even and flat there is a crevice/groove along the upper edge where the 'sewing junction' is hidden.
Shoemaker's transparent polyurethane glue and upholstery yellow glue are used for glueing procedure.
The whole door panel will be soon reupholstered in same dark brown leather.
I hope you enjoy the video and find some inspiration!
Cesar 
Авто/Мото
Related videos: ruclips.net/video/CnciDzKou7I/видео.html
ruclips.net/video/F2xI3_B22-A/видео.html
Cechaflo don cesar cómo se llama la maquina para adelgazar la piel vivo en usa y necesito una de esas y también hice los panel de mi carro de piel y lo que no me gustos es que se miran las marcas donde puse los dedos al estar poniendo lo para atrás y ya no se quitaron que pudo ser el pegamento con la esponja y la piel ????
Y gracias por tomarse el tiempo y darnos a conocer la magia de sus enseñanzas se lo agradecemos mucho de usted e aprendido mucho y todo se lo debo a usted saludos desde Oregon
@@rudy2aa La máquina se llama "rebajadora de piel/cuero"(leather skiving machine) ruclips.net/video/fx_XuIHcO50/видео.html
Es muy usado en el campo de la zapateria. Hay de muchas marcas nuevas y usadas en tiendas y mercado libre.
www.ebay.com/p/12027547995
Cechaflo ok gracias don cesar se lo agradezco mucho saludos
Literally you have inspired me to redo my whole interior. I bought my sowing machine last week and made a custom boot cover for manual car, and didn't know if I would use the sewing machine again but thankfully I found you. Thank you so much you so far have the best videos I've seen and you are so patient. I love the attention to detail, you are an artist.
Thank you whoever recorded this video I like the zoom in is very clear,extra points for the zip tie welding
I love your videos, no talking, just action.
Im from Chile and I never saw something like this. Its incredible the dedication, effort and attention to detail. Your work is one in a million. Hope one day I could try to make something like this
Спасибо Вам огромное!!за столь подробное видео!!!! И без слов всё понятно. Надеюсь и дальше будете нас радовать своей работой! С уважением из России, Леонид!!!
Dear friend, Thank you very much for appreciating this art craft! Actually, a picture speaks hundreds of words!
поддерживаю
Смотрел не одно видео твоего канала, у меня нет слов КРАСАУЧИК! Хоть по рукам и видно, что пожилой!
Billion of thanks
Welcome to this channel anytime!
we learn a lot from you, thank you
I am so glad the video is useful!
Welcome to this channel anytime!
Excellent work Cechaflo - thanks so much for sharing your work with us. Also, I must add your videographer and editor also has done an excellent job capturing all the detail. Cheers.
Dear friend, Thank you very much for appreciating the effort to transmit some upholstery ideas!
Welcome to this channel anytime!
Hello dear friend, I admire your work! your precision is top notch! I will always wish you good luck, health to you, your family and friends! bow to you!
Nice job
Bonito trabajo gracias por compartír sus conocimientos maestro
Beautiful work Sir , love your video’s.
Le Chef, The Boss, El Maestro...
Bravo
From France 🇫🇷
I really appreciate your kind comment!
Greetings from Mexico!
Love your videos, great attention to detail!
Thanks for appreciating this art craft!
great job! you are a master!!
Clean job.
Thanks so much for appreciating this art craft!
Don Cesar, cada dia me inspira mas ha superar mi estilo y abilidad. Es un orgullo Paisano!
Красиво получилось
Superb sir
Que bonito trabajo maestro cesar aprendo mucho de sus trabajos wue sube en videos.
Ha quedado espectacular! 👍👍👍👍👍👍 Muchísimas gracias de nuevo por el tiempo que se han tomado usted y su hijo en filmar este trabajo, que tan útil es para los que disfrutamos con la tapicería! 😉😉😉😉👏👏👏👏👏
¡Muchas gracias nuevamente por apreciar este trabajo!
Las dos puertas traseras se forrarán completamente en cuero/piel como parte del conjunto de tapicería trasera que comprende el asiento y espaldar. Este proyecto consiste en adaptar este conjunto a una base de madera para que se convierta en un mueble de oficina personalizado. En un siguiente video mostraremos la armazón de madera con las piezas que se van a forrar fijadas sobre ésta.
En el caso de tapizado OEM de puertas, refiriéndome a este diseño del Jaguar, nosotros los tapiceros solamente tapizaríamos el 'descansabrazos' en sí, sin incluir sus otras partes de plástico y el pequeño panel que sostiene un 'adorno de plástico imitación madera'. Las otras áreas son muy opcionales si el cliente lo requiere.
El tapizado del descansabrazos sólo consiste en las dos piezas que se unen por una 'costura ciega' y 'la sobrecostura doble' por encima. La parte interior de plástico que comprende 'la agarradera' y 'la otra pieza que aloja el botón' no se tapizan generalmente, mas bien se pintan con pintura para plástico.
@@Cechaflo muchas gracias de nuevo por las explicaciones, y estaremos atentos para disfrutar con el resto de vídeos! 👏👏👏👏
En relación al tapizado, si en fábrica forrasen todo en piel como está haciendo usted, se incrementaría muchísimo el precio de los coches porque cuando usted desmontaba el tapizado que venía de la fábrica, también pensé que aunque fuese solo una pieza forrada, también tuvo que llevar un buen rato al trabajador que se encargó de hacerlo...
Algunas veces he visto algún vídeo en internet de cómo trabajan en fábricas de coches de lujo, como Bentley, y no me importaría nada pasar allí unas cuantas semanas de aprendiz, como tampoco me importaría pasar esas mismas semanas junto a usted mientras hace sus trabajos, que no tienen nada que envidiar a los de Bentley o Rolls Royce 👏👏👏👏😁😁😁😁😉😉😉
Nice 👍
Superb
Thanks for kind remark!
Very good
I really appreciate your kind comment!
Великолепный результат!
I really appreciate your kind remarks!
Thanks for watching! 😊
I don't do any upholstery work save for some very small things as dining seats or a cornice board can be larger...I won't likely ever do an auto upholstery...all that being said, I love your videos and the work you do...it is excellent ,interesting, and educational...I have recommended your channel. Thank you for sharing your techniques, and special tools.
Upholstery is a trade that involves different activities. It is matter of decision to enter and improve with another options.
Thanks so much for watching the videos!
Interesting to see & it brings back fond memories as I worked at the company who produced these armrests. Your methods / process are not too far away from how the original armrests were trimmed. Good & Very Accurate Video. Although the twin needle & the white tape on the back were applied using a single machine
Thanks so much for your kind commentary!
A related video:ruclips.net/video/F2xI3_B22-A/видео.html
Parabéns por mais um exelente serviço,grande mestre. Cordeiros Estofados BH MG.
Thanks for watching the video!
Welcome to the channel anytime!
those hands tell a lot
Estos vídeos me resultan adictivos,son además de pedagógicos son relajantes,lo hace todo de una manera tan pausada y tan ordenada, que me dan paz y luego ese punto de ingenio están muy bien. Bueno hoy último día de éste año tan perro. Feliz 2021 !!!
¡Que Ud. y sus Seres Queridos tengan un Exitoso y Feliz Año Nuevo 2021!!!
Excelente maesro!!!!!!
Estimado Antonio, ¡Muchas gracias por apreciar esta artesanía!
Nice
Thanks for kind remark!
thanks)))
Welcome to this channel anytime!
I admire the blatant patience and obvious experience in so many of your mannerisms. And your channel is the most helpful on any platform that I’ve found. Thank you for everything My friend
But I have to know 😅 do you swap little post it notes back and forth with your customers as well?
Your work is all interesting stage stage design well God bless you
Dear friend, Thanks for kind comment!
وين نروح نلقاكم ههههه🇩🇿🇩🇿🇩🇿
@@SAMI-vd1pj I am located in Mexico.
شكرا
Welcome to this channel anytime!
@@Cechaflo we great you in any language
@@yousseflahbil679 Any talent comes from God!
De la part de tout les algerien Bravo 👏
Thanks so much for kind remarks!
@@Cechaflo m.facebook.com/Habillagevolant/
ALLLLLLL that plastic LOL. anyway first video seen on this channel and already a sub. Just plan ol "this is the title and that's what I did" video. the way they all should be.
Once i saw the hscksaw blade sharpened to a knife point I was all in
I liked that as well. It is a great idea.
As we can see, after cutting off the rivet heads they can be 'melted' and 'welded' forming 'small protrusions of plastic' to refasten the piece again. As I show in former video little screws are also useful to refasten these plastic pieces to door panel frame.
👍👍👍👍👍
Thank You Cechaflo for the Fantastic Video.Where did you get those small pliers you use for tucking
Those are orthodontic pliers. www.amazon.com/Assorted-Orthodontic-Pliers-Instruments-ODONTOMED/dp/B007NFVY5U
Just discovered this channel and I frankly admire the craft! Please, tell where are you located, I would like to have some work done to my truck.
Extremely helpful and clean work. Is there other ways to skin the backing on the leather other than the mechanical fabric machine that you used?
Only if we order leather directly from the tannery and skived to the required size. For this projects is advisable 1mm thick.
Very difficult the use of another ways. It could be with a beveler (hand skiver), but not so easy.
@@Cechaflo been watching your videos because they are more along the lines of the restomod I'm going to be doing. Alot of the parts are hard to come by in my part of the United States (Bicknell, Indiana) working on a 2001 Mitsubishi Diamante LS, and the more I can do on my own the more I save. Thank you very much for your advice and videos.
👍
Thanks for kind remark!
Ещё одна классная, хорошая деталь. Интересно, спасибо. Но вот один вопрос появился, смотрю вы на шов декоративный не положили типо спанбонда?, просто прошли шов и все?
There is no much tension on that area, and I considered not necessary to put the ´спанбонда' beneath de junction (it is optional).
I use the 'fabric backing' as a must in case of 'double stitches' on car seats.
The Hog Ring Forum stands out a related post where master trimmer Brent Parker also shows this technique. The 'groove' along the upper armrestg edge is very important to get a 100% flat french seams.
Thanks for watching the video!
Maestro cesar usyed esta en la ciudad de mexico? O enque parte de la republica vive usted porque lleve mi maquina brother a que la ispeccionen y me la dejaron igual . Por eso compre la consew 206RB- 5
Another great video, good job.
Why did you use the polyurethane glue on the center seem and not on the edges?
What is the difference in the 2 glues?
Is the hair drier to make the leather easier to stitch or does it do something to the glue?
Thanks so much for appreciating this art craft!
The 'polyurethane glue' is stronger and once is stuck it is very difficult to unstick. I used it on center seams because keeps them in place very secure. For the edges I used the traditional yellow glue because no much risk of unfastening on this part.
The 'shoemaker's polyurethane glue' is activated by some heat. When it dries naturally it does not stick and give us time to line up the seam.
The hair dryer should blow hot air to activate the transparent glue, otherwise, it would not stick. The heat makes hot the leather surface and passes through to also activate the glue.
A hair dryer also helps to erase wrinkles, because the leather tends to shrink if some heat over.
@@Cechaflo thank you very much for the information, as I did not know about polyurethane glue 👍👍👍👍👍
And, again, congratulations about the video and your son's video work is impressive as well!! 👏👏👏👏
Beautiful work, and great tutorial! Hmyou help a lot to improve in this craft! Could you share what brand of the polyurethane glue it is? Or maybe i can buy it from you?
I am located in Mexico and I buy this product from local shoemaker's suppliers. I do not sell upholstery products.
In the first anchored comment of this video there is a list of polyurethane glues. You would need to do your own research in order to find a good one that suits your own requirements: ruclips.net/video/TIKF6NvXHE4/видео.html
I hope this information helps
Maestro
Excelente trabajo
Mis felicitaciones
Solo tengo 2 preguntas para usted
De que marca es la pluma que uso para marcar la piel?
Y en donde la puedo conseguir?
Saludos de coah mexico
Estimado Edgar, estas plumas marcadoras son chinas y la utilizan mucho los fabricantes de zapatos. En alguna tienda de artículos para zapateros la puede encontrar. En caso de no conseguirlas, las podría pedir por internet.
www.diytrade.com/china/pd/4660281/Sell_silver_refill_pens_leather_marker.html
es.aliexpress.com/item/32860513730.html
Great video, great attention to detail. Why did you use a polyurethane glue for the joint ?
Thanks so much for appreciating this art craft!
This glue is stronger than regular yellow glue. When it dries does not stick unless it is activated with some heat(hair dryer). It gives time to line the junction up.
Cechaflo thanks for the reply . Very helpful.
Que parte de Mexico se encuentra maestro?
Is it possible to buy the plastic rivets from anywhere or just the case of using normal clips/fasteners and 'welding' them on?
Thanks
It happens that plastic rivets are integrated to the plastic frame of the armrests. They could be welded back again or small screws could be used instead.
ruclips.net/video/CnciDzKou7I/видео.html
Great video, as usual! You are so talented it is a pleasure to watch your work.
Could you please let us know more information about your polyurethane glue? I've searched "shoemaker's polyurethane glue" and see all kinds of tubes of various adhesives but have not been able to find something that appears to be a liquid polyurethane that you are using in your video. Thanks!
Hopefully under another names, such as: polyurethane adhesives, etc. These sealants cure with heat. Shomakers know the names.
www.walmart.ca/en/ip/shoe-goo-shoe-repair-protective-coating-295ml/6000191325754
www.alibaba.com/product-detail/polyurethane-PU-shoe-adhesive_60137695657.html
@@Cechaflo - Thanks for your quick reply. I had seen the Shoe Goo with the Google search but it didn't say anything about polyurethane. I'll check out the Alibaba one. Thanks again, and I love your work!
At 11:50 you are marking the leather with a white pen? Is it a pen or what exactly is it?
Thanks, and thanks for your excellent video's!!
It a leather marking silver pen. www.tandyleather.com/en/product/leather-marking-pen
www.amazon.com/Holsten-Silver-Marking-Pens-6pk/dp/B076ZYQG5D
👍👌😎
maestro buenas tardes, ese pegamento de poliuretano, es algo parecido al UHU?
No tengo idea. La marca que maneja este pegamento en Mexico se llama Productos Sigma y el pegamento es de contacto ideal para plástico con nombre Plastigon. Estos productos lo usan los zapateros.
Sir, how much do you usually charge for 4 doors?
Dear friend, I think, the cost depends on the kind of door panels to give an estimate.
Thanks so much for watching this video!
اريد المساعده
Hola perdone tengo una pregunta para pegar materiales los k sean , en unn panel de plastico o moldura como la del video k es mejor cola impacto resistente calor o el pegamento k usted fabrica , lo digo por k a mi se m despegaron unas piezas ya k parece k la cola al pegarla con vinil no respira , gracias teacher
Estimado Javier, No fabrico ningun tipo de pegamento. Con respecto a los pegamentos el que mas uso es el amarillo que se utiliza para carros o muebles.
El secreto para un buen pegado es, si fuera necesario, lijar bien la superficie a pegar, no mucho, lo suficiente para quitarle lo 'aceitoso/brilloso' que está por encima. Luego de aplicar el pegamento a ambas superficies, dejar secar bien. Si queremos un mejor pegado se le aplica 2 capas (solo al plástico, madera, etc. al que vamos a pegar) La primera capa sirve de 'base'. Hay que dejar secar bien esta primera capa. La segunda, la efectiva se deja secar lo suficiente (15 min aprox) y esta listo cuando hacemos la prueba que no este pegajoso a la punta de los dedos.
ruclips.net/video/o2xeezdF8Ss/видео.html
What kind of pliers are you using and where to get a pair?
These are called orthodontic pliers and could be found on ebay, amazon, etc.
www.amazon.com/Surgicalonline-Dental-Pliers-Crown-Straight/dp/B01N0L8OYP
What size of threads are compatable
138 thread size. www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=polyester-thread-138
Who pen is this. Fom Brazil
What kind of machine is that he using . The green machine
It is a Fortuna leather skiving machine.ruclips.net/video/QVyYC3-Zbug/видео.html
Where are you located? I would like to have my seats reupholstered?
I am located in Mexico. Would it be affordable to send them down here?
Master, timer 11:50. How did you estimate the allowance for that bump?
I mean how did you estimate it on the pattern paper?
I used 10 mm for seam allowance. It could be less or more, half of an inch for instance. Anyways it will be cut off at the end.
It is seen at this moment in the cardstock paper: ruclips.net/video/sMfvDElAEmw/видео.html
The sewing junction line is done at a distance of 10 mm from the edge(seam allowance)ruclips.net/video/sMfvDElAEmw/видео.html
The seams are cut close to the sewing junction.
ruclips.net/video/sMfvDElAEmw/видео.html
The cut edge is glued down into the plastic crevice:
ruclips.net/video/sMfvDElAEmw/видео.html
More tips about armrests:
ruclips.net/video/1gLMDHyE6Yw/видео.html
ruclips.net/video/3FuxLeCesS8/видео.html
ruclips.net/video/0NPPdsETij4/видео.html
ruclips.net/video/XqW_YvGa3m4/видео.html
Como de llama el papel que usa para las plantillas maestro?
Utilizé cartulina escolar para hacer las plantillas.
Muchas gracias maestro, gracias por sus videos y su respuesta
What type of sewing machine is that?
Is an Industrial Paff 1245-706/47 (old version made in Germany)
✅ ruclips.net/video/U3HBXBDDKoo/видео.html
@@Cechaflo so what's new that I could get in the states of the same quality?
@@sidleonard7432 There different good trade marks, such as Juki, Singer, Adler, Consew, Brother, etc. The machine should be triple transport, heavy duty.
You could get direct assistance from the seller.
www.advancedsewing.com/usedsewingmachines.html