@@williambreedyk7861thanks I was trying to check too. They must spin for a long time so the concrete can set enough for the baking process. I hate being wrong, lol.
They also had to be hollow to save materials and weight. Saving materials saves cost, and saving weight means it doesn't take as much force to drive them into the ground (as these are made specifically for foundations). They also carry more loads compared to solid ones, and the hollow cross-section means they can be inspected by looking through the void.
I am not a structural engineer, and I must have missed the part where they were pretensioned. They just filled the wire frame and spun it. The longitudinal cords were supposed to be stretched before the concrete cures, no? And even if they were, the gauge and the number of those cords don't seem sufficient to compress all that mass for real effect.
Lo tensan sí, pero no con un sistema hidráulico como se acostumbra, en éste caso es manual, con una mariposa, quizás al ser una columna no necesita tanta tensión como un puente o una losa.
I love this channel! These videos are oddly satisfying/relaxing, with a good mix of items that are up my alley, or something completely random and specific like this one.
The pouring of concrete is a solid column but the demoulding is a hollow concrete column-???? 1. Concrete quality is extremely important here ~ workability n aggregates size n sand grading. (I don’t think open area batching plant is possible to control the quality of concrete ~ correct me if I m wrong) 2. Demoulding is so easy ~ the demoulding oil/additives must be excellent.(Spinning using of centrifugal force instead of external vibrators~ 👏 👏 👏) 3. Is there pressurised steam curing to gain requires concrete strength??? ~ it is laborious to manually tied reinforcement cage to pretension cables. If wire mesh could be considered for circumferential/circular bending ??? n tac welding.
Thus is an old technique used in our Chennai at Poonamallee industrial estate forty years back for manufacturing of cement pipes, poles posts etc. Our young generation have no idea about this!
A pré tensão nos cabos é a razão se ser do concreto protendido, isto é, deve haver uma pré tensão para que esse processo tecnológico tenha esse nome. O que não é visto no vídeo.
Растянуть они могли лишь стягивающую арматуру, чтобы добиться её максимальной прочности, а так бетон работает на сжатие и то на очень небольшие перемещения, а дальше разрушается
@@ВасилийМинин-г1я так они ее и растягивали. Как-то, на очень небольшой коэффициент арматура все же тянется без деформации. Плюс там повышенная температура в форме.
@@ВасилийМинин-г1я ну может по сравнению тросами это не так эффективно. Я не знаю. Но ведь зачем -то они делают именно так. И ещё не понятно, куда именно идут эти пустотелые колонны. По всей видимости смысл все же есть.
Mr. Process. Ótimo vídeo, parabéns pela postagem. Fiquei pensativo. Como que o pilar ficou totalmente completo após o processo de concretagem, se não foi possível enchê-la totalmente pois vimos as ferragens expostas dentro na forma, ou molde metálico, como queira, na execução da concretagem. Alguém aí pode me tirar esta dúvida? Daqui de Goiânia Estado de Goiás, Brasil.
9:09 Watch the rotation process of the formwork. Due to the centripetal force exerted on the entire interior of the formwork by the high-speed rotation, the concrete is cured in concentric circles.
It's very fascinating to watch all these manufacturing processes. The Lord did give us the greatest intelligence above all other creatures that He had created. And yet some people have a hard time seeing Him through all this. But all of us have our whole lifetime to see Him as He is according to the Holy Scriptures. Thank you.
Дмитровский завод ЖБИ выпускает много серьёзнее изделия. В колоннах на видео арматуры очень мало, наши изделия более сложные, прочные и используются в более сложных условиях.
@@shaulbenshimon6463 преднатяжение не такая серьёзная операция, некоторые изделия (например балки мостовые, путепроводов, тавровые/двутавровые) по другой технологии и не делаются... Некоторым изделиям и технологиям более 100 лет. Что на видео, действительно, вызывает восхищение, принтер для печати на сваях, если пигмент, такой же стойкий как химический карандаш И может печатать на изделиях любой формы... Тогда это круто.
Concrete is very strong in compression so pretensions steel will given resistance in crack, bending stress. Just wonder what application these are for?
"Обычный сборный ж/б элемент" Обычный Ж\Б так не делают шибко хлопотно. "И для чего оно в сжатых конструкциях?!" Вот в этом и вопрос! Значит есть применение, которое не показали.
아파트만들때 벽체식 이아니라 기둥식으로 phc 파일 넣어서 만들면 층간소음 없을건대 이제품 사용하면 제품 가성비 좋아서 원가 절감 도 되고 좋을거 같은대 지금 사이즈보다 조금 줄여서 층간 높이로 잘라서 3미터 사이즈 팔면 그게 안되면 다이아 몬드 컷팅기계로 자르면 되니까 단독주택 지을때도 이 파일 사용하면 튼튼할거 같은대 직사각형으로 네 귀퉁이 모서리를 파일로 박아서 기둥으로 사용하고 그러면 겉에 색만 백색으로 입히면 더 이쁠거 같은대
Korea luarbiasa maju sampai pemasok chip dll otomotifnya juga berkembang pesat,sok indonesia berkarya yg buat maju,inimah msh aja bahas2 yg tdk penting😭
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
😀 Thank you for watching our video!
📢 Product in Video (영상 속 PHC파일) : bit.ly/4344wB5 (삼일씨엔에스)
🚗 Location (위치) : bit.ly/3Xub76J
🎬 Contact : mrprocess44@gmail.com
What are they used for?
И вам спасибо,за поучительный ролик.Отличная робота👍
Plppppplp
Это КНДР?
Q¹¹¹q¹1q1
Very informative and wonderful work. Loved it.
All of the specialized, purpose-built machines are very interesting.
That's very wonderful
힘내라 대한민국 ᆢ 멸 공 😅😅
Extremely clever to make them hollow by using the right amount of concrete and letting centrifugal force do the rest
I don't I think they're hollow, I think the ends have a cavity. I watched with sound off though but didn't see a tunnel view of one.
@@jamesclark6487 13:30,- the bottom pipe 3rd from the left. You can see through it to the pipe behind it.
@@williambreedyk7861thanks I was trying to check too. They must spin for a long time so the concrete can set enough for the baking process.
I hate being wrong, lol.
@@jamesclark6487 Concrete generates a lot of heat while it cures (hardens). That is likely fast setting concrete, so a lot of heat generated.
They also had to be hollow to save materials and weight. Saving materials saves cost, and saving weight means it doesn't take as much force to drive them into the ground (as these are made specifically for foundations). They also carry more loads compared to solid ones, and the hollow cross-section means they can be inspected by looking through the void.
Spun pile.
Wow i like wire caging/porming
May you have the strength to become number one in the world by introducing the latest technology to the world
เจ๋งมาก👏👏👏🥰🥰
My goodness what a beautiful technology.
Well done . Informative 👍👍👍. Thank you for sharing. Be safe 🇨🇦
Волшебно ❤❤❤
Nice ❤❤❤❤❤❤
knitting machine was cool
Greatest technology
व्हेरी नाईस विडीओ. बघण्यासारखे प्लाट. अमेझिंग.
h
Amazing guut 🙏👍👍❤❤❤❤❤
대한민국 중소강국
대단하고 자랑스럽습니다
Nice Well Done
El hombre da su inteligencia y las máquinas completan ese complejo proceso de estructuracion y fundición del concreto armado.
✌️✌️Amazing
Amazing
Esses vídeos que mostram todo o processo de produção da gosto de ver ❤ 👏👏👏
Sensacional Parabéns
Thật tuyệt vời
Wow 😲😲😲
Шикарно
넘대단하십니다...
Luarbiasa 👍
산업의 기초
존경합니다.
I am not a structural engineer, and I must have missed the part where they were pretensioned. They just filled the wire frame and spun it. The longitudinal cords were supposed to be stretched before the concrete cures, no? And even if they were, the gauge and the number of those cords don't seem sufficient to compress all that mass for real effect.
I didn't see it either. I'm a civil engineer.
They tension the frame at 5:43.
Lo tensan sí, pero no con un sistema hidráulico como se acostumbra, en éste caso es manual, con una mariposa, quizás al ser una columna no necesita tanta tensión como un puente o una losa.
It is happen at 8:40
This many million views, some extra captions would help this
Teşekkürler
Topp, maravilhoso.!
여긴 철근을 빼먹지 않고 튼튼하게 만드는군요.
마치 LH처럼 말이죠
I did work in this types of spun pile factory in Malaysia. Almost the same from Hiroka Japan.
Керемет.
Там, где планируется на много лет и стандартизированные изделия ❤!
ในไทยก็มีครับ อยู่อำเภอไทรน้อย จ.นนฯ ทำเสาเล็กสุดเส้นผ่าศูนย์กลาง 250.m.- 800 m.เปิดมาหลายสิบปีแล้วคับ ผมเป็นหนึ่งในพนักงานของบ.
I love this channel! These videos are oddly satisfying/relaxing, with a good mix of items that are up my alley, or something completely random and specific like this one.
Cty mình đang lm ở nhật chuyên chế tạo vỏ ngoài của cột đúc này
Круто!
All of that to have a dude on a fork lift risk dropping them.
Super cool process and the sheer size of everything involved.
Sống trên đá mà làm cọc tốt hơn cả xứ mưa nhiều
❤❤❤
ಯಬ್ಬಾ ಸೂಪರ್
satisfid moment
Ga usah jauh jauh bro di Cikarang .KOBE juga ada parik nya.
👍👍👍👍👍
👍👍👍 👍👍👍 👍👍👍
❤❤❤❤❤❤❤❤❤❤❤❤
👍👍
대단하네요. 저 기둥을 어디에 쓰는지요?
전봇대??
@@is-ql3ys 지반이 약한곳에 먼저 설계에 맞게 여러개 박아놓고 그위에 기초를 칩니다... 보통 땅에 파일박는다고 하죠...
@@is-ql3ys이쑤시게 ㅎ
띨또
The pouring of concrete is a solid column but the demoulding is a hollow concrete column-????
1. Concrete quality is extremely important here ~ workability n aggregates size n sand grading. (I don’t think open area batching plant is possible to control the quality of concrete ~ correct me if I m wrong)
2. Demoulding is so easy ~ the demoulding oil/additives must be excellent.(Spinning using of centrifugal force instead of external vibrators~ 👏 👏 👏)
3. Is there pressurised steam curing to gain requires concrete strength???
~ it is laborious to manually tied reinforcement cage to pretension cables. If wire mesh could be considered for circumferential/circular bending ??? n tac welding.
What are they ultimately used for? Bridges? Piers?
When a building such as an apartment is built, the piles are driven into the ground,
for those strengthen the ground.
전세계가 보세요 한국의 건설공장 어떻게 만들고 어디에 사용 되어 지는지😂 한국이 건설업 전세계를 어떻게 만들어가는지!
Thus is an old technique used in our Chennai at Poonamallee industrial estate forty years back for manufacturing of cement pipes, poles posts etc. Our young generation have no idea about this!
That would be like a party sized churro
AI vision mold bolt robot automatic assembly and disassembly.
Why is it smoking when't it's unmolded? Is it dried by heat?
A pré tensão nos cabos é a razão se ser do concreto protendido, isto é, deve haver uma pré tensão para que esse processo tecnológico tenha esse nome.
O que não é visto no vídeo.
Вот это я понимаю бетон с преднапряженной арматурой. Даже плиты делают с тросами, наверное сложно и дорого арматуру растягивать.
Арматура не даст обратного напряжения, она просто растянется
Арматура тоже не простая а уже специально растянутая
Растянуть они могли лишь стягивающую арматуру, чтобы добиться её максимальной прочности, а так бетон работает на сжатие и то на очень небольшие перемещения, а дальше разрушается
@@ВасилийМинин-г1я так они ее и растягивали. Как-то, на очень небольшой коэффициент арматура все же тянется без деформации. Плюс там повышенная температура в форме.
@@ВасилийМинин-г1я ну может по сравнению тросами это не так эффективно. Я не знаю. Но ведь зачем -то они делают именно так. И ещё не понятно, куда именно идут эти пустотелые колонны. По всей видимости смысл все же есть.
😯
Bom trabalho
파일을 기둥으로도 쓰나?
30년이 지나서 봤지만 기술의 발전을 전혀 느끼지 못하는 분야이네요!
혹시.. 30년전과 같아서 영상을 만든게 아닐까요? (기술노출?)
ㅋㅋ 반농반진
아마 60년 전에도 저렇게 만들었을걸요. 아니 100년전에도.....
저 기둥들은 어디에 어떻게 쓰이나요??
하수관
@@Lucas-gz8sy요지 ㅎ
건물 지을때 지반이 약한곳에 박는 용도입니다.
아파트 공사시에 필히 하는 것이라 봅니다.
Tekrar eden, imalat yolunu uzatan imalat aşamaları var. Daha kısa zamanda daha az yolmi kat ederek imalat etmek mümkün.
مشاءالله
😎💪🏻💪🏻💪🏻👍🏻
Mr. Process. Ótimo vídeo, parabéns pela postagem. Fiquei pensativo. Como que o pilar ficou totalmente completo após o processo de concretagem, se não foi possível enchê-la totalmente pois vimos as ferragens expostas dentro na forma, ou molde metálico, como queira, na execução da concretagem. Alguém aí pode me tirar esta dúvida? Daqui de Goiânia Estado de Goiás, Brasil.
9:09 Watch the rotation process of the formwork. Due to the centripetal force exerted on the entire interior of the formwork by the high-speed rotation, the concrete is cured in concentric circles.
Верно подметил.
Верно подметил.
Вы точно подметили.
Точно подметили.
My first job in korea 1996
그런데 이 기둥 어디에 쓰는거에요? 전봇대는 아닌거 같고..
건축물을 지반이 연약한 땅 위에 세울 때
저 파일 들을 촘촘하게 땅에 박아 넣어
그 위에 세워지는 건축물의 하중을 받아내는 역활을 합니다
저 파일을 박지 않으면
나중에 건축물의 하중으로 인해서
지반이 불규칙 침하가 발생하여
건축물에 심각한 손상이 발생 합니다
저런건어디에쓰이나요?
소사장제 운영
It's very fascinating to watch all these manufacturing processes. The Lord did give us the greatest intelligence above all other creatures that He had created. And yet some people have a hard time seeing Him through all this. But all of us have our whole lifetime to see Him as He is according to the Holy Scriptures. Thank you.
Did I miss the step of non destructive defects detection using x-ray or ultrasound?
Onde são usados
why second curring is necessary ? time 13:38
이거 한 개에 얼마나 하나요? 비싸겠음.
문과가 왜 이걸 계속 볼까..😅
Почему такого производства нет в России? Вопрос к эффективным российским менеджерам из-за рубежа.
Дмитровский завод ЖБИ выпускает много серьёзнее изделия. В колоннах на видео арматуры очень мало, наши изделия более сложные, прочные и используются в более сложных условиях.
@@123фбвВ видео написано что это колонны с преднатяжением. У нас тоже делают с преднатяжением?
Вообще в России целые монолитные многоэтажные дома заливают бетоном, вы о чем? 🤣 А тут какая то свая малюсенькая
@@123фбв Ну куда ты слился? ЖБИ откладываем? 🚽🤣
@@shaulbenshimon6463 преднатяжение не такая серьёзная операция, некоторые изделия (например балки мостовые, путепроводов, тавровые/двутавровые) по другой технологии и не делаются... Некоторым изделиям и технологиям более 100 лет.
Что на видео, действительно, вызывает восхищение, принтер для печати на сваях, если пигмент, такой же стойкий как химический карандаш И может печатать на изделиях любой формы... Тогда это круто.
ငါတို့ဆီမှာ လို ----
တိုင်က ဝါးခြမ်းပြားမပါဘူးနော်။
怎么成为空心的没看明白
не знаю зачем я это смотрел но залип на 16 минут как на сиськи в первый раз
이런거 보면서 느끼는건데 우리나라는 없는 공장이 없노
its very very dangerous work and big risk ,...only expert workers with any experience can do it,...
Concrete is very strong in compression so pretensions steel will given resistance in crack, bending stress. Just wonder what application these are for?
Pile plant in title
succion cups @11:34 ! 8-O
•••
И где там предварительное напряжение?!
И для чего оно в сжатых конструкциях?!
Обычный сборный ж/б элемент
Подобное производство есть в России?🤔
@@ЗдоровыйСчастливый конечно.
С советских времен.
"Обычный сборный ж/б элемент"
Обычный Ж\Б так не делают шибко хлопотно.
"И для чего оно в сжатых конструкциях?!"
Вот в этом и вопрос!
Значит есть применение, которое не показали.
Это свая. Вот её решили делать так. Сжимается там лишь опалубка при формовке. 🤔
Из таких преднапряженных плит делают делаю аэродромные плиты .
Nih bapak jualan besi kabel
Looks expensive.
아파트만들때 벽체식 이아니라 기둥식으로 phc 파일 넣어서 만들면 층간소음 없을건대 이제품 사용하면 제품 가성비 좋아서 원가 절감 도 되고 좋을거 같은대
지금 사이즈보다 조금 줄여서 층간 높이로 잘라서 3미터 사이즈 팔면 그게 안되면 다이아 몬드 컷팅기계로 자르면 되니까
단독주택 지을때도 이 파일 사용하면 튼튼할거 같은대 직사각형으로 네 귀퉁이 모서리를 파일로 박아서 기둥으로 사용하고 그러면 겉에 색만 백색으로 입히면
더 이쁠거 같은대
오래전에 한양건설에서 시공한걸로 알고있어요 근데 문제점이 너무 많아서 지금은 안하는가봐요 제일 큰게 누수문제라고 하더라고여
순살
Xi knows
Thomas Anthony Thompson Jennifer Martin Carol
They left out where they add the tofu to the aggregate.
อยากไปทำงานที่นั้นต้องทำไงครับเคยทำที่ไทยงานเหมือนกันเข็มspun
Play something other than 'Green Sleeves' on a synthesiser in the workshop.😅
Korea luarbiasa maju sampai pemasok chip dll otomotifnya juga berkembang pesat,sok indonesia berkarya yg buat maju,inimah msh aja bahas2 yg tdk penting😭