How To Repair A Rusted Out Gas Line
HTML-код
- Опубликовано: 31 мар 2016
- Rusted gas line!? RUST!? Yes you heard it right more rust... ahhh music to my ears :) Well let's have a look at this old rusty gas line and see if we can fix it! *NO SMOKING OR OPEN FLAMES WHILE WATCHING THIS VIDEO PLEASE*
Dorman 800-300 Nylon Fuel Line Repair Kit:astore.amazon.com/httpswwwy083...
Mastercool (71475-PRC) Black Universal Hydraulic Flaring Tool Kit: astore.amazon.com/httpswwwy083...
Interested in stuff seen in the videos or the tools and toys Eric O. likes and uses? Check out the *ALL NEW* SMA A-Store and help support the channel! : astore.amazon.com/httpswwwy083...
If an SMA Video has helped you out please consider giving using the "support" link on our RUclips home page. The videos take real time to create and pull us away from real work that pays our bills.
THANKS!
--Eric O.
WANT AN "SMA" STICKER OF YOUR OWN!?!
Simply send and E-mail to SMAstickers@outlook.com including: your shipping address and e-mail address in the text, I in turn will send you a paypal invoice for $5 each USA or $6 each international. Let me know how many you want and as soon as the paypal invoice is paid I will ship them out ASAP! Thanks for your support of our channel!!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not South Main Auto Repair. 
Авто/Мото
I enjoy watching a professional mechanic doing these types of repairs. It's incredible how many specialty tools there are for automotive.
Hey Eric heres a tip for you in case your dorman tool breaks in the middle of a job. the way I've done this is take a coffee cup full of close to boiling hot water. You can use microwave to heat. Dip nylon hose in for 30 sec then push fitting in by hand, when it cools in a few seconds it contracts and is a permanent leak free fix. Hope that helps thanks for all your videos!
Done that!
Heh, kinda like those new fangled PEX plumbing systems
No shit. Genius
Sounds like a job for the heat gun to me.
@@alexpshaw221 No one likes a smartass; so FO!
Great job Eric, you are a true craftsman. Your community is fortunate to have you.
I agree. We feel his pain...
You are the FIRST one to show the tools and how to make push-on fuel line type connections. Thanks ever so much for that demonstration.
thats bc its unnecessary and over the top the rest of the line will need to be replace soon anyway lol and then what all that was essentially for nothing, high pressure hose and some clamps is all you need, not to mention not everyone has a lift or every vehicle is as easy access as this one is, tool may not fit
I gotta say i never seen anyone better online that puts in the time and effort to make incredible videos. You are excellent my friend and i can tell you take great pride in your work. Love all of your videos! Keep up the excellent work
Very slick. What a difference it makes when you have the right tools and you know how to use them. The double zip tie trick was bonus!!
Yea perfect idea!!
I found that tip very helpful and will use it from now on - Thanks Eric !!!!!
me too. funny how you can put zip ties on things for years, and the bleeding obvious has never occurred..
Quick connects couplers available in stores double zips used for race application with hydraulic lines cut 1 inch with single zip to isolate 2 lines together to prevent rubbing on anything works great too...
Eric your videos and explanation are the best I'd rather watch your videos than TV programming
finally someone that expalins every steps he does and why he does it and also explains how to use the tools that he uses to get the job done . After watching hundreds of videos of the same kind I thought i was alone to do this with the clients
Great Work Eric! The best tool I found to cut the nylon and rubber lines cleanly is a PVC Pipe Cutter.
Thanks for all the time and effort you put into your videos. Your work and your videos are 1st class!
Creative repair!! Love it!! Now all I need is for Harbor Freight to sell knockoffs of the line fitting tools! 🤣🤣🤣
I don't know why I get so much satisfaction watching you repair old rusted out parts. Keep up the good work.
i love the brake clean sound effect every time. i honestly get a chuckle.
The sheep sound when he uses fluid film.
You do nice work Eric. Thanks for sharing your videos with us.
Thanks +Justa Hondafan
It is GOLD to have a master mechanic live in the NE region where he deals with rust! sub'ed!
I'm glad you showed those tools at work, I was curious about how well they actually worked. - Amen.
Great video as always Eric. You have kept me sane through lockdown, thank you. After watching so many videos and learning so much, I finally have a comment/tip that you might use. Using the double zip ties(as you call them) to space the lines is great. I trick I learnt from karting, was to slide the zip tie through a piece of rubber hose to insulate the to lines apart. I hope you and your family are all staying safe and well 🔧🔩👍
We really enjoy the episodes, and think it's great when you do things with your family.
+John Christopherson Hey John I really appreciate that! Thanks for watching and thanks for the support of our channel!! It really helps!
--Eric O.
Great video. Not sure if someone else has posted this as there are a ton of comments already but Dorman now offers just the handle P/N 800-350. I did fuel lines on my truck last year and it was a pain to push the plastic connectors into the plastic line without the tool. Hot water helped but it was still very hard. I am glade to see they sell the tool without having to buy the full kit.
Thank you for sharing your experience and expertise. I was able to purchase the Dorman gun clamp affordably without having to buy the full and expensive kit. Along with some bulk nylon tubing, a couple fittings, and a little practice, I was able to repair a worn fuel line, using your video as a guide! Thanks again!!
Damn!
I FEEL LIKE I JUST GOT TAUGHT EVERYTHING i NEED TO KNOW ABOUT HOW TO DO A PROFESSIONAL FUEL LINE REPAIR!!!
Your style and camera work and delivery are also professional.
Thank you very much, and keep doing more videos on everything! Yours may be the first channel I subscribe to.
Bill
Thanks Bill
I completely agree. My confidence level has soared with this info. Thank you Eric!
Great, now come over and fix the leaking fuel line on my trailblazer. It's currently 20 degrees in my driveway and I'm having trouble motivating myself to get out and do it. Lol The life of the home mechanic! I guess it's better than the time I chiseled a block of ice off of a fuel filter to change it in 0 degree weather. Oh well, It'll be done by this evening, guaranteed. You got to do what you got to do. Then go for a test drive and get a coffee and doughnut for your reward! I pay myself very cheaply.
I love that flaring kit. Makes factory flares every single time
I've seen those on aliexpress. Nice to see one in action.
Eric o on all your RUclips videos u show that u are a true master technician and enjoy watching all your stuff and I'm a technician myself from England
It is great to watch a demonstration that the producer know how light is important to making a legible demo. Also this was a demo that answers the anticipated question.
Great Video I just bought that doreman fuel line repair kit
great mechanic.
I really learned a lot watching this video, thank the "boss" for giving you the extra time to document as you went. I like your style, the good close ups you used through out and the encouragement that, "if I can do it, you can do it" I will let you know how it goes
Eric, watching the video for the first time and the zip tie trick just blew me away. I will definitely be using that idea. Thanks!!!
this channel costs me a fortune in tools
+Tosh twentythree (tosh 23) We are all tool whores
SO TRUE
A good mechanic needs a shit load of tools!
@@waynegouin939 I'm going to invent a 10mm socket finder ...I'll make millions
All channels of this nature will cost you a fortune in tools. But I am not complaining, it's great to have the freedom to work on your own stuff.
Eric o make everything look so easy 👍
Videos like this one are the reason I can't take sma for granted. Been a sub for a couple of years and still learning
Love all your videos. I've been working on vehicles all of my life and I'm still learning, thanks to guys like you.Keep up the good videos.One thing that makes my nervous when you are working under a car and you have no safety glasses on. I've spent many hours in the ER for not doing so.
Very good work Eric - top quality - always thinking of the customer and the life of the part - spraying the gooey on the lines, trying not to break clips and holders and fittings and doing an extra minutes worth of work to ensure a good job seems to be your everyday goal ...... I sometimes think when I watch you work, that you are a "" clone "" of me !!!!!!! I can see why Mrs. O fell in love with you - and she asked you to marry her !!!!! She knows a good thing and a great value when she sees one !!!! Please keep the top quality videos coming - and never ever ever think that it is a waste of your time ...... it is the opposite .... it is quality time doing an important service to your customer and to your viewers, like me !!!!!!!
How can you not have more subscribers? I watch lots of other guys (SK, ETCG) and I have to say that you are absolutely as good as them, if not better in the way you approach problems and explain your way through (and make the vids entertaining). I TRULY look forward to seeing you pass one million subs.
Oh I will never be as good as them, they are the legends
Maybe someone will be saying that about you 5 years from now. (Did your mind just blow a little?) Speaking of Legends, wouldn't it be amazing to get an Acura in the shop (one of my all time favorite cars). Hope someone brings you one sometime so we can see the inner workings.
Eric, I'm sure that Albert Einstein thought that way also - you underestimate yourself !!!!!
I sit in bed for hours watching this guy work. The things I pick up are game changers. But like others have said, this guys costs me a lot of money in tools haha. You truly are one of the best
I've wondered the same thing. I also think hes on par with ETCG, and actually a good deal more in depth with regard to some of the advanced computer diagnostic techniques.
Great instruction, clear description of how to make the repair.
great tool! I learn something every time I watch your videos. Thanks for the education.
Eric O.: "You do not need the fancy tool to do this job"
Me: Watches 5 minutes of video. Orders the tool on Amazon. Watches 5 more minutes of video. Orders more tools on Amazon.
Wash, rinse, repeat. I don't have any leaky fuel lines to repair, but I'm ready now.
nylon? Steal?? wtf were these engineers thinking? More money down the road is what they're thinking! No reason fuel and brake lines shouldnt all be stainless steal, and not the cheap crap. lol
Nice video as always.
Another fine lesson from the Master! Thank you Mr. O!
Darn You Eric! My wife's 2011 HHR has a leaking fuel line. The local shop wanted $678 and change to replace the fuel lines. Now since I've seen this, I bought one of the Dorman Fuel Line kits and I can do the whole thing for less than $300, plus having the tool when any of my trucks or my kids cars spring any kind of a fuel leak. An Brother its all your fault! So thanks, an by the way she told me go ahead and order one of those flaring tools if I really want it. I'm holding out an checking to see if I can find a decent used Autel Scanner. We old mechanics never stop working, we just cut back a little once we get near that big 70 year mark. Keep getting me in trouble with the wife for wanting more tools. Lol, stay sharp and successful young man.
Enjoyed the video.
+Ozzstar Thanks Oz
Anybody get the "Just use the cutting torch" comment? haha!
+Rob Carstuff Yup. Eric has a great sense of humor. Makes the vids fun as well as informative.
+Rob Carstuff I was chucklin at that thru half the video.
He always makes me laugh with that kind of stuff. The delivery is subtle, which is part of what makes it funny.
+Silky Tp how about .." There she is the old Double Donger " LOL
+deepsquat600 I would like to see him explain that one to his kids :)
Burst a rear brake line on a 1993 Chevy 1500. And of course while replacing the brake line I upset the high pressure and return steel fuel lines and they both pin hole leaked everywhere (YAY) ! So I opted to use the after market nylon fuel line kit, wish Me luck.
I had a 1970 Chrysler Newport which is about a 5500 lb car, I was driving across a parking lot when in the front driver side soft line went. Isn't that just a sick feeling when that pedal goes to the floor all of a sudden! To add insult to injury I was rushing and I got on the line with the wrench a little too hard. Forgot that it was a brass freaking fitting. Back to the park Supply for one more line! I replaced both front lines that day. I got it home in first gear I'm modulating the parking brake to come to a complete stop hand tapping the brake pedal so I would show brake lights. Thankfully it was only about 2 miles.
@@JohnRodriguesPhotographer Glad You got home safe for sure. It's always something but we strive to save and drive our old tired iron. I got it all replaced (Fuel lines and brake lines complete) and it went very well.
I never even knew the the nylon repair even exited! Thanks all the cool & older tools in this video. As always, really enjoy the content you put out.
I cut it twice and its still too short
LOL!
Measure twice, cut once!!!
I heard that about you!
Cut a few inches off the other end and add it to the short end!
I use a clear polyurethane spray on the brakeand fuel lines to help stop rust after doing those repairs.
better than OEM IMO with more quick connects easily fixed after other parts rust and leak!! great job Eric O.
Truly expert quality repair. Over and above "professional".
Great tool and plans to make up a new replacement fuel lines. As I have been watching the northeast rust belt vehicles come into your shop, I really think the auto makers should have a factory option or a default option for all new vehicles delivered/sold to dealerships located within the rust belt zones to offer factory equipped "rust belt protection" engineered to prevent this kind of waste. It seems that after only 7 to 8 years these vehicles are ready for the "crusher" which seems a bit too steep when folks are paying as much as $80,000+ for a vehicle. Just a thought since it would be a factory built specific hard core corrosion prevention features..
Well... that would be great, the only problem is that your $80,000 vehicle would cost you $125,000.
good jop bud love to see or videos there the best on the tube
Great video amd very good info, I just recently invested around $700.00 in fuel lines and installation on an 06 GMC pickup. Man I sure wish I had watched this video sooner. I think I couldve bought these tools and still saved a hundred bucks. Keep em coming
Man .. You are worth your weight in gold... I have commited to watching your video in full..Wow!! I am amazed at what I have learned.. I started watching your videos a few years ago, but felt that I could not keep up with your wealth of knowledge.. but I think Im not as figgiting as I was 5/6 yrs ago..Thanks for a superb video(s)..
the right tools for the right jobs... i did several fuel lines repair and no one wanted to pay for quality work.they always opted for the quickie fuel hose and fuel injection clamp type of deal... work fine but far from being pretty.oh well i HAVE to get those tools i'm going to ask my snap on dealer if they are still available.Nice video Eric
+Jonathan Lessard Oh my gosh that would be $800 from snap on... get it here way cheaper if you want it... same kit, only one company makes it... astore.amazon.com/httpswwwy0837-20/detail/B007TN15EG and this astore.amazon.com/httpswwwy0837-20/detail/B000XQ5IO4
+South Main Auto Repair seems like a better deal........but they wont ship to Canada
Jonathan Lessard Hmmm do you have an Amazon Canada?
What about these guys? www.toolpan.com/Mastercool-71475--Universal-Hydraulic-Flaring-Tool-Set--_p_2536.html?gdftrk=gdfV27228_a_7c824_a_7c2023_a_7cMAS71475&gclid=CPHDpqrl7ssCFQIcaQodnnsNGA
+South Main Auto Repair yes we do but the pneumatic flaring tool is currently out of stock oh well hahah i hate beign Canadian sometime!
Honestly say here watched one video went through half of a cig and came to this video and have no idea why but opened description and saw the no smoking. XD
Eric, you are the Master Craftsman!
I just replaced that same chassis fuel line on an 2006 Equinox. It was about $65 for the OE line and an hour of labor. I have used that same repair kit and it works great!
For cutting that nylon line you should get yourself a pair of PEX tubing cutters can get a pair of cobalt brand at Lowe's for about ten bucks I think they'll do up to an inch and a half
Great for cleanly cutting almost anything. I’m not too big on the Kobalt brand, but I wouldn’t think any brand could screw up such a simple tool too badly. Lol
Hi Eric love your videos! Question when using nylon lines what about running them inside a piece of rubber line to protect them? Do you think that would be a good idea?
Eric O... Thank you for all your videos... I'd love to meet you man... I can't begin to explain how much I look up to you as a mechanic. Thanks for all your videos.
Great Video. Thanks for taking all the time to do this. I used to work on cars in the 80's and I need some help for modern cars. Great lighting and description in your video!
You've probably found a replacement for the Dorman "gun" piece but it looks to be like it's a the business end of a regular irwin quick grip bar clamp.
"...use a cuttin' torch."
Lost it right there! Thanks for the laugh sir!
Cutting torches and fuel lines go together like a laxative and a sleeping pill!!!
Hi can you please let me know what make that little mini pipe cutter was? and perhaps send me a link and what was the name of those pinch pliars thanks
@@gtibruce Pipe cutter looks like a Mastercool AC7003... Northern tool has Performance Tool Model# W82003 look like the same MFG different name on it.
- Pliers are fuel line or hose grip pliers.
@@maverickdallas1004 lmfaoooooooooooo
Love your auto repair videos. I wish all mechanics would video their repair work.
Great job Eric, really useful tips regarding fuel line repairs, really like the tools, equipment and fittings....
When I lived in Ohio I bent many a steel brake and fuel line replacements for my own cars.
I like your zip tie work I think I'm gonna start doing that from now
I always use compression fittings and they don't leak as long as you get them tight !
@@baldy194859 Have used compression unions for over 40 years on brake lines, never a problem.
I had to repair the hydraulic tool that a mechanic who used to do my work had. It really helped out to do brake lines when they were starting to rot out. Here in Michigan, it totally sucks. The brake lines, the fuel lines & what gets me is they're supposed to be stainless steel lines but yet they rust out just like ordinary metal lines would. Crazy cheap vehicle parts.
Great video anyways before I forget. I like the plastic kit. With those quick connects sure is the way to go for fuel lines. I was also glad to watch because I have the Honda Accord yet to replace the fuel lines & the light in my head just went on. Now I know where I'll tap into the fuel line at so another good reason to be here watching another one of your video's... Thx man...
Great video,Truly a craftsman
Awesome repair. What did you spray the metal lines with at the end, lithium grease? Also how are you exactly using the zip ties to stop rubbing of the lines?
fluid film
good stuff
Berkibile makes a 2+2 product to spray on lines it's a basically an oil base Parafine don't know if spelled that right but it's a cross between a wax and an oil that stays a while. There is a few other products out on the market now as well all about the same thing.
Dorman does not watch your channel. RUclips is blocked in China 😁
Use a VPN... even tho it is banned...
That mastercool tool is wonderful. It, with the correct adapters, can do almost anything. I am not a professional mechanic, but I do a lot of older car A/C work. Best investment I ever made.
Your the master at what you do! Awsome work!
"If that doesn't work you can always use a cutting torch !' April Fools !!!
+theoldwizard998 Haha... your right you should use a cut off wheel right?
"Maybe now that Dorman whatches your channel"
I used to work on cars at BOCES. It was for free. Nobody gets paid. It was a "school-related" service. Brakes, Mufflers, Tune-Ups, Engine swaps; an occasional free fire and band-aids. lol Plenty of car-grease and laughs. (had a good time; no really bad accidents, but some close ones)
Man have cars changed since the 80's~90's.
I've learned a lot just by watching your videos. Things aren't rushed, like it was when I did cars.
But then, all of the cars I worked on, don't exist anymore. Though the principal is still the same.
LMAO
Really love your videos.
Nice repair. I have that same flaring tool I bought off of Amazon. It makes really nice flares, I find it works best on those quick connect flares if you put a little antiseize on the line before you put the die on it.
That doorman "pump handle caulk gun" looks an awful lot like a standard quick release clamp.
That's what I was thinking. If you remove the plastic pad I'm thinking the piece that holds the die will slide right in the notch
I agree it reminded me of a Stanley bar clamp. The only difference is the top of the handle has a guide built into it for the line if you're putting two lines together. I wonder if the internals of the handle are the same as a Stanley bar clamp though
That baby line cutter was handy in this case. I've never seen one that small. I knew the brake cleaner was coming.
In my opinion Imperial makes the best cutters, The larger rigid may be great but the minis Not so much Erics looks like master cool and they bind I have used them and threw them out
I got one equally small. Great for when you need room
I bought the ratcheting mini tube cutter from snap-on. It has a springloaded cutter, so reef it down once and go round n' round til it's through.
Nice flaring tool. A job well done. Thanks for the video.
Fantastic ! It's awesome when you have the proper tools, makes life and work that much better. Thanks for another fine video...
+JOGO Thanks for watching
Kroil the oil that creeps. Good stuff. LOL
2:45 Cut the fuel line, then put out the cigarette - got it! :-)
About to hit the driveway and replace the whole line on the same vehicle this video was a super help thanks bud.
Great repair Eric! You are my favorite RUclips mechanic.
Maybe I should send you the gun from my kit... or the whole kit. I bought the kit when I put a 5.3 in an 83 C10 and never touched it since.
That would be very generous of you!
Rubber fuel line and hose clamps 😺. I understand you can’t do that type of thing in a professional repair shop tho.
Done it . Works great . I do recommend flaring the metal line ends before joining .
Low or no pressure its not a problem. Best to double up the clamps. Four clamps, two at each end = insurance.
Great work Eric! I have to replace the evap line from engine to gas tank on 2004 Ford F150.
What a nice replacement option. A whole lot easier than bending steel lines. I'm learning about tool and materials that I've not been privy too, so thanks again for bringing us along.
cant i simply cut the metal line on either side of fuel filter and then double clamp some rubber hose? thanks
Not on a fuel injected car
why does fuel injection matter?
indeed, there is more pressure on a fuel injected truck like mine and the stories i've heard of folks simply clamping a rubber efi hose over a cut off steel line did not sit right with me. what i ended up doing is this: Purchased a Dorman fuel adapter that was 5/16" compression fit(which i tightened onto my cut-off steel line) and the opposite Barbed end of the dorman adaptor(which was designed for 'nylon' fuel line) i attached and clamped on a 1/4" efi rubber hose and put one clamp over the barbed end and the 1/4" hose also slipped onto my inline fuel filter very easily.....No Leaks! seems to be the answer i needed. good luck
Kevin S. that stuff he uses is way cheaper rubber hose for fuel, trans ect is expensive i guess.
Use a flare tool to flare the ends just a bit, use a pliers and scrape up the end of the hard line a little to create friction and use 2 clamps. The fuel injection ones work best.
older vehicle- 07... LOL.
IKR! Never had anything that new and never will HAHAHAHAHA
I like how Eric dropped the metal section of fuel line twice and so casually picked it right up. If that were me I guarantee it would have bounced of my toe and ended up under the tool box.
Well informed video. Nothing like older tools.
Although you said compression fittings may be used for the pressure gas line aren't they illegal for brake lines in New York?
No matter what SK says lol.
+john smith+ Unless there has been a recent change double flare steel lines are the only legal brake lines in NYS
+john smith Compression fittings are Illegal for brake lines because the hydraulic brake system is under a lot more pressure than a fuel system... most fuel systems are around 50 psi where the hydraulic brake system is under 500- 1500 psi...
Wow... trying to thin out the gene pool, eh? lol
I use a double flare tool and have used bubble flare ( ? ) fittings but not since I was a kid have i used regular compression fittings lol
@@matt8863 works if you have really high suspension. Awful advice on his part still!
How those push lock style connectors don't leak is beyond me. They just seem so cheap.
It works on the "Chinese handcuff" principle....
O ring seal
I know, right?! Engineering at its finest. Auto CAD calculations, for the win!
Great job!!! I swear......it almost looks like you know what you're doing! Lol I truly appreciate you putting these videos on RUclips. I have learned soo much from you. Thank you for taking the time to do this. Keep 'em coming!
Trabajo profecional ,great work.
Sweet 5 STAR Repair * * * * *
gas will put your cig out for you ...... unless your talking racing fuel.
You're probably thinking of diesel. Gasoline will absolutely light off with a cigarette (really it's the vapor that's igniting).
+JaWe no, it won't. I've personally dropped a lite cigarette into a cup of gasoline. The gas extinguished the cigarette.
+bluelude2001 I did some quick reading and, in some instances you're right. It all depends on the temp of the cigarette (e.g. if you just took a drag and it's cherry red there's a high potential for combustion of the fuel vapors, otherwise not likely). Learned something new, thanks, though I still don't plan on smoking around fuel. :)
I appreciate you showing how the flaring tool works. you are the best
Thanks +John Hafernik
I've been using a cutting torch to remove fuel lines for years, never had an issue.... JUST KIDDING. Another great video, thank you sir!