I sublimated a 3001cvc today at 350 for 45 seconds, washed it inside out on cold cycle and at least half the image faded out. Is it possible bc I didn’t do hot enough and long enough? I saw you do 400 for 60 seconds on the same shirt and wasn’t sure if that’s a common problem or if I should be looking into a different problem?? Your video is super helpful, thank you.
@@garylock4522 I used the poly/cotton blend and I sprayed and let them sit in direct sun for 15 minutes then rinsed with the water hose and let dry. The sun is what really helps from what I found.
Can you please help me? I gave a epson workforce 7820. It’s converted to sublimation printer. I printed a design and pressed at 400 degrees for 60 seconds. The finished product was very light and not vibrant at all. I’m not sure what i did wrong. Do you have any suggestions? I used the Bella canvas 3001 shirt.
Hi! Can you recommend a good 60% polyester brand? Coz I've been searching and there's always either 50/50, 35/65 and 52/48. I can't find a good 35/65 blend. Thanks! @@craftology5560
Anybody have a way to sublimate on a solid navy or black Bella Canvas Tribleb (3413) shirt?
What kind of Bella shirt did you use?
I sublimated a 3001cvc today at 350 for 45 seconds, washed it inside out on cold cycle and at least half the image faded out. Is it possible bc I didn’t do hot enough and long enough? I saw you do 400 for 60 seconds on the same shirt and wasn’t sure if that’s a common problem or if I should be looking into a different problem?? Your video is super helpful, thank you.
Can you use butcher paper instead of a Teflon sheet? Also are Teflon sheets reusable?
The link code isn't working
Does it wash out though??
It will slightly fade the first time you wash it and be a vintage style look
What pressure and heat seeking did you use
have you tried bleaching them?
Yes! I love the bleached look!!
@@poofycheeksblog I could not get my Bella shirts to bleach how long do you leave the bleach on?
Thank you
@@garylock4522 I used the poly/cotton blend and I sprayed and let them sit in direct sun for 15 minutes then rinsed with the water hose and let dry. The sun is what really helps from what I found.
We’re they the Bella 6400svs?
@@garylock4522 3001cvc
Do you have a favorite sublimation paper?
Can you please help me? I gave a epson workforce 7820. It’s converted to sublimation printer. I printed a design and pressed at 400 degrees for 60 seconds. The finished product was very light and not vibrant at all. I’m not sure what i did wrong. Do you have any suggestions? I used the Bella canvas 3001 shirt.
seem like that shirt has too much cotton to poly ration, for best results on blends always aim for at least 60% polyester
Hi! Can you recommend a good 60% polyester brand? Coz I've been searching and there's always either 50/50, 35/65 and 52/48. I can't find a good 35/65 blend. Thanks! @@craftology5560