Police have no right to know what you're searching anyways. Unless you committed a crime and they have probable cause to get a warrant... so you don't have to worry about it anyways.
Great video, but the aspect makes it hard to see. maybe a 16x9 ( horizontal) instead of 9x16 may make it easier for everyone over 30. good stuff man, ty
Agree, great video. Aspect, lighting, and the vid quality is not great, especially for all those tiny parts. Hard to see the shape/edges of certain parts.
first kit i bought from Patmos and it was my first ever and was advertised as "Complete upper and complete lower parts kit" only to find out later that it was not in fact complete, it didnt have the Locking Block and from what i see around online MOST kits dont include one, just an FYI to anyone who may be just starting these build kits n such.
Just looked, Lucas still has the Austrian made Gen 3 26 frames for $65 and the 19 frames for $99. I have one question: If I wanted to build a Gen 5 G31/32/33 would a Gen 4 32 barrel (aftermarket conventional) work in a Gen 5 23? I know that a Gen 5 G23 slide works on a G45 to make a 40 cal G23X. How about a 357 sig G32X? Or a Gen 5 G33? Glock released the Gen 5 G29 and G30 right before Gaston’s passing into great beyond. However there’s no 357 sig models in Gen 5. Even Sig won’t run the 357 sig. Both the P226 and P229 had easy conversions between the 9mm/.40/357 sig. And Glock had easy conversions across the three calibers as well. Thanks
I did the math and everything would come out to $420-ish (before taxes). Not including the 3.5lbs trigger. This is with using the cheapest parts I could find. A new Glock 26 gen 5 at bass pro shops is $529.99. I guess building it would save me some money, and I’d have a green slide 🛝
To avoid and FFL you will have to do machining work yourself. Either with a P80 (google the store) or 3d print one. Its not hard but you will need at least 300 dollars for the tools. Its MUCH cheaper to just buy from a gun store (if you can, that is.)
Lmao sigs are a terrible design. One spring falls out, you have at least an hour repair. I promise you I have over 30 Glocks not a single issue. I have 4 sig p365’s and 2 of them had major issues. It’s easy to see which company to stick with. Sig makes trash now a days plain and simple. They beta test their products in the civilian market. Over 35 pending cases on the sig sauer p320.
don’t forget to turn in to be engraved for serial or my state makes you 3letter initials 0and build number or number build, zip code-10 digits…. but if that number is taken, the state is happy to pick one for u and likely never get it back due to some minor thing in the build they dont like…. and nothing u can do about it. or buy pre serialized from p80 or lone wolf and build and pray when u turn in for registration they dont nit pick……yeah democratic states are AWESOME when u trying to be law abiding joe
@spnfirearms so the frame already has a serial number in bedded into it and you have to do a federal background check for it ? Like a AR lower? Is that the only part you have to a check for?
If your buying the Glock OEM factory side your at an FFL and at that point you should just buy the one on the shelf. Your gunna be turning it back in to the "authorities" in a year or two. Print a 3D frame and NOW you are building your own custom pistol...
Not true you can buy a glock factory slide and have it shipped direct to your home no FFL required. This is not the case with the frame as it is considered the firearm and is serialized it must go to an FFL and a 4473 completed.
@@barefootbob1269 "This is not the case with the frame " If its an 80% from Polymer80 or you 3D print it then its no ones business but yours. ALWAYS go this route because the FFL means you WILL be turning that Glock in to your local police station in a bit. The Fed's CANNOT allow the serfs to be armed....
The police definetly do not like my search history today
I was talking about a remote control bobcat tractor bucket off with two mini guns mounted kn sides with seat removed for extra space for ammo!
how to build p80 for no reason at all mr ossifer
Police have no right to know what you're searching anyways. Unless you committed a crime and they have probable cause to get a warrant... so you don't have to worry about it anyways.
is been almost a month for me
@@Pipislayerwith me asking how illegal to have firearm with serial number scratched off and all the sites to buy p80 shi😭
this is the most extensive glock build vid ive ever seen ty
Thank you so much you fixed my gun when it came to the licking blood I completely overlooked it
Very informative! I’m getting ready to do a complete Glock build for the first time and this answered all of my questions. Thank you.
Can you give me a list of all the parts I would need I want to build my own probably a 27
Now make a video about what parts you need to buy online in order to build a whole Glock
Agreed
No need he just sat down and explained the whole video y’all have to be slow the. Internet is too easy
Cant help stupid
A year late but just buy Glock parts kit and polymer 80 Glock frame just make sure they match
Can you send the link to where you get your Glock gun parts from
great job brother ❣️ i will forsure use this
9mm trigger housing ejector can take the 357 Sig round but will not attempt to even cycle the 40 seen it done
Great video, but the aspect makes it hard to see. maybe a 16x9 ( horizontal) instead of 9x16 may make it easier for everyone over 30. good stuff man, ty
Agree, great video. Aspect, lighting, and the vid quality is not great, especially for all those tiny parts. Hard to see the shape/edges of certain parts.
Put the back of your striker in the rear of the slide to hold it in place while you install the spring cups.
Right on. Thanks. Easy enough.
The assembly is much easier if you put your locking block and locking block pin (1st pin) in first, then do your slide release and trigger pin. 👍
im trying to build a g19 is there anyway you could tell me a website and sum of the decent parts i need to build it?
Yeah he made this much harder than it needs to be 🤔
@@Detman329make a tutorial
@@ebltact.did u find it?
first kit i bought from Patmos and it was my first ever and was advertised as "Complete upper and complete lower parts kit" only to find out later that it was not in fact complete, it didnt have the Locking Block and from what i see around online MOST kits dont include one, just an FYI to anyone who may be just starting these build kits n such.
so cop judah complete set them buy a locking block that’s it?
The Lucas tactical Glock 26 frame is out of stock what other frames do you recommend ?
Great shit bro
I swear you just mad my day buy dropping this keep the content coming brother
No problem man. I gotchu. I messed up a few times but I’ll get better live
I been looking for a nice site to buy my lowers from an Lucas is what I been looking for thanks again bro
@@spnfirearms is this frame serialized or not.?
Thank you finally about to build one😂❤
Such and educative video thanks alot
The extractor is in the slide, I believe the piece you keep calling the extractor is the ejector
Those damn P80’s with a heavy underbite ! 😆
I hope that slide had a channel liner in it already , I didn’t see you install one 🤔
I wanna go play with big boy legos now damnit 😂
Thank you.
Just looked, Lucas still has the Austrian made Gen 3 26 frames for $65 and the 19 frames for $99. I have one question: If I wanted to build a Gen 5 G31/32/33 would a Gen 4 32 barrel (aftermarket conventional) work in a Gen 5 23? I know that a Gen 5 G23 slide works on a G45 to make a 40 cal G23X. How about a 357 sig G32X? Or a Gen 5 G33? Glock released the Gen 5 G29 and G30 right before Gaston’s passing into great beyond. However there’s no 357 sig models in Gen 5. Even Sig won’t run the 357 sig. Both the P226 and P229 had easy conversions between the 9mm/.40/357 sig. And Glock had easy conversions across the three calibers as well. Thanks
Did your guiderod pop out at the last second?
Does the locking block come with the complete slide when you buy it ?
Going to build one. Ty
Can you give me a list of everything you need for the top half?
I did the math and everything would come out to $420-ish (before taxes). Not including the 3.5lbs trigger. This is with using the cheapest parts I could find.
A new Glock 26 gen 5 at bass pro shops is $529.99.
I guess building it would save me some money, and I’d have a green slide 🛝
Show me the website where you found the parts
Yo send website
web pls
Bro is not tryna give up that site
@@m90ss wrd
Awesome build great job
Thank man, respect!
😂😂😂 you work just like I used to do😂😂😂 shit falling and springs flying.. good video tho..
thanks so much
Where does the barrel part come from ?? Is it part of the top, bottom slide ??
So all you need is a frame and slide and lower parts and upper parts and locking block
BEAUTIFUL GLOCK!
Is the slide lock spring for the p80 26 the same as the original
How much did you spend overall for this build
why are you recording these in portrait man?
I must be on a list from all the shi I've been searching up
Isnt there supposed to be another pin hole for the locking block?
Is putting a 26 together cheaper than buying a complete one?
Do the build kits come with instructions?
What's the website you use to buy the build kits for guns ?
He says it at the start
Your good!
Def didn't see you put the cups on bro
Does it come with instructions?
I have a p940sc g26is it the same? My trigger won’t reset properly
from scratch would be building it from chunks of steel
Assembling from SCRATCH 😎
bro got in front of the camera and stressed out🤣🤣 great video though much appreciated
Hello dear friend your Glock gun it's very strong one 😊
That black slide looks almost like a zev ?poly 80 slide
Is permit required to purchase gun frame?
Bro said he high 😂
What part😂
Lucas tactical has all clean firearms right ? And do they come with matching serials or does it not matter if it’s different serials im in texas btw !
I don’t think it’s all matching. They are all clean firearms and they are just assigned a serial number like any other Glock would be
Wish i could order frames here in cali...bummer nice vid
Make it yourself
find someone on the Arizona border 😂 I gotcha
i just need a cheap one and a single bullet, how much would cost?
I'm a fellow glock 26 junkie
anybody got a vid on what parts to cut out?
How do you put the rails in on p80 26
Can’t buy Glocks in Massachusetts, but is it legal to build my own like this and then have it registered?
Where can i get a frame that does not require an FFL? please help! thanks
To avoid and FFL you will have to do machining work yourself. Either with a P80 (google the store) or 3d print one. Its not hard but you will need at least 300 dollars for the tools. Its MUCH cheaper to just buy from a gun store (if you can, that is.)
You need better lighting maybe over head to show down into the firearm
can u do this in vanada
Build a bear.... No, build a Glock.
SuperBBb!!!
That's not building from scratch. That's just putting together.😊
Forgot sleeve
what caliper is the one you built?
How much would it cost to build a Glock¿???????¿
Is it cheaper paying for a gun or billing it?
Building and u can add customs
my guy live streamed him self biulding a glock this is the most american thinh yet
What’s another site I can get frames shipped to door
i just build 26 gen 4 for 295$ all glock parts thanks for the video
What site you buy the parts on?
@@Lando-420it’s like they’re lying
So the way to build a Glock is to get all the parts for a Glock and put it together.
Had a question? When I put my slide on and press trigger. It moves the slide also. And it won't fire. What am i doing wrong?
trigger part that pushes safety plunger for striker to fire may be making contact with slide..you may have to polish that trigger bar piece
More like "How to build a glock from its spare parts..!"
Hi is this frame serialized or unserialized.?
do you kno where i can get frame which ships to my house not FFL?
That’s an ejector not an extractor also the 336 sucks that’s why they upgraded it.
This is not from scratch. The term from scratch essentially means to fabricate it yourself.
does the 19x frame still Work For Any Build Of a 19 ?
Yes Gen 4 And Gen 5’s Only Tho Nothing Under Those Two
@@DheeSantanagen 3 slide works too
@@spec_blext9765 I Wouldnt Recommend Any Gen 3 Slides For 19x Frames But Those Work Too
Best way to build a glock is to toss it in the trash, buy a SIG and put a glock sticker on it.
Lmao sigs are a terrible design. One spring falls out, you have at least an hour repair. I promise you I have over 30 Glocks not a single issue. I have 4 sig p365’s and 2 of them had major issues. It’s easy to see which company to stick with. Sig makes trash now a days plain and simple. They beta test their products in the civilian market. Over 35 pending cases on the sig sauer p320.
Glad you agree with me. Glock are generic trash.@@spnfirearms
HTF do you not show how you build the channel Anna Gunn
Look up 80 percent builder
👍🏻👍🏻👍🏻👍🏻👍🏻
Any other place I can get a frame for a 19 with out an FFL or any paper work just straight to my door step
There should be a few websites where you can find stripped frames that’ll ship straight to your door
This is assembly not building 😂
But thanks for the video
how you got a ghost glock wit a switch what if it go down😭😭😮💨
On bro “ get tf outta hea “😂😭😭😭😭😭😭😭😭
don’t forget to turn in to be engraved for serial or my state makes you 3letter initials 0and build number or number build, zip code-10 digits…. but if that number is taken, the state is happy to pick one for u and likely never get it back due to some minor thing in the build they dont like…. and nothing u can do about it. or buy pre serialized from p80 or lone wolf and build and pray when u turn in for registration they dont nit pick……yeah democratic states are AWESOME when u trying to be law abiding joe
Stop telling the state your builds and problem solved 🤷🏾♀️🤷🏾♀️
Wow, looking to build a flock from scratch and get nothing but adds. What is going on?
Awesome video but what about a serial number lolol how do you order that lol my guy be careful
It goes straight to my FFL. Everything I do is legal and follows the laws. Nothing to be careful about
@spnfirearms so the frame already has a serial number in bedded into it and you have to do a federal background check for it ? Like a AR lower? Is that the only part you have to a check for?
Can you make one for me? Then i,ll buy it off you?
😂So your telling me you can literally buy parts online and just build it home instead of getting a gun permit ? lmaoooo yooo what 😅😅😅😅😅😅😅
cool! Although, I don't think you know what "from scratch" actually means.
Don't listen to the haters kiddo... But we need to talk, but not on here,..
I’m interested…willing to pay for assembled pieces
So.... Not from scratch....
But it's just assembling factories made pieces.... Not do it by yourself....
$65 glock frame? More like $200.
Just gotta find it at the right places.
Drop the frame sites 🤦🏽♂️
If your buying the Glock OEM factory side your at an FFL and at that point
you should just buy the one on the shelf. Your gunna be turning it back in
to the "authorities" in a year or two. Print a 3D frame and NOW you are
building your own custom pistol...
Not true you can buy a glock factory slide and have it shipped direct to your home no FFL required. This is not the case with the frame as it is considered the firearm and is serialized it must go to an FFL and a 4473 completed.
@@barefootbob1269 "This is not the case with the frame " If its an 80% from Polymer80 or you 3D print it then
its no ones business but yours. ALWAYS go this route because the FFL means you WILL be turning that Glock
in to your local police station in a bit. The Fed's CANNOT allow the serfs to be armed....
It's called scrap. not scratch
Is this legal to carry?
Yes