How to replace a Stator on a Suzuki GSXR 600 06/07/08/09-'15

Поделиться
HTML-код
  • Опубликовано: 9 янв 2025

Комментарии • 350

  • @fjones1914
    @fjones1914 7 лет назад +4

    I'll be doing this once the parts get ordered. The bike didn't start up after over an hour of continuous riding.
    Ended up having to be towed home. A little research led me here.
    Thanks for the video!

    • @centersnare32
      @centersnare32  7 лет назад +1

      I hope you get it fixed! If you have any questions feel free to ask.

    • @behmer1879
      @behmer1879 6 лет назад

      Did this ever fix the problem? I have the same issue. Bike starts fine when engine is cold, but after more than a half hour of riding, it won't start up again.

    • @Jonathan81284
      @Jonathan81284 5 лет назад

      @@behmer1879 did you ever figure out what your issue is mine is having kind of the same problem my bike will start up and idle fine if I slowly give it throttle it's fine but if I snap the my wrist and give it a rev it'll die

    • @centersnare32
      @centersnare32  5 лет назад

      Nice man

  • @freemanvain
    @freemanvain 4 года назад +6

    This is the best video that I have seen on this issue, very well done and extremely helpful!

  • @fiqrizain3525
    @fiqrizain3525 8 лет назад +27

    great video, I Don't have GSXR but this works the same almost for every motorcylce. thx this is helpful

    • @centersnare32
      @centersnare32  8 лет назад +3

      Fiqrizein Thanks so much man

    • @wheelyfbaby
      @wheelyfbaby 4 года назад

      Centersnare32 3 years later just clutched one for me too!

  • @user-yt2nq1xf7p
    @user-yt2nq1xf7p 8 лет назад +7

    Thanks bro. My bike died on me at a light last night and your video made this fix look like a breeze. Great tutorial.

    • @centersnare32
      @centersnare32  5 лет назад

      Thats good i'm glad you were able to fix your bike let me know if you need more help

    • @centersnare32
      @centersnare32  3 года назад

      I'm glad it helped you!

    • @zakariamouih97
      @zakariamouih97 2 года назад +1

      like it died when you stop and hold the clutch ..couz my bike keep doing that ?

  • @jasondeuchar1648
    @jasondeuchar1648 6 лет назад +4

    just a point to note , my bikes R&R blew a while back, after research I changed the R&R but not the stator as I give it a voltage check and everything seemed at the right voltage, as I was going over to the picos in Spain a few weeks later on a lads trip I thought it best to have a few ride outs to just get the confidence back in the bike, all still seemed well. Day of my bike trip I rode 150 miles to Portsmouth and as boarding the ferry my bike started to play up, had to bump start it, this went on through out my trip which really spoilt it as didn’t want to ride the bike too much, unlucky for 1 of the group who had a head on smash turns out to be lucky for me, as his bike was a write off so he no longer needed his battery and yes, I took the opportunity to take it as back up( which I needed to get the bike home, Just!!), I guess I’m trying to say...... don’t cut corners, always check the stator if your R&R blows, also buy OEM parts as I think a cheap R&R may of blown with the voltage not being right.. all is good now, this video was a fantastic help as I’m not in anyway mechanical so thanks 👍🏻 oh by the way my mate was ok, a night in hospital and a cast on his leg top to bottom 😂

  • @Edmepisodes
    @Edmepisodes 6 лет назад +1

    Just replaced this on my 99' 600gsxr. Both stator and rectifier. I still had issues with staying on and draining battery. so i order a new starter. Hope that will fix all power issues. Knowing its an older bike and I haven't ridden it in almost 3yrs. Figure I replace all brand new. The sad part after seeing this video (awesome vid), I wish I didn't pay a bike mechanic to do it. But now we know.

  • @gustavokamiche1063
    @gustavokamiche1063 7 лет назад +8

    Thank you for the video I was able to successfully repair this with your guidance.

  • @rubendelatorre8324
    @rubendelatorre8324 3 года назад +3

    Just ran into this problem today thanks dude ! Really helped me understand the problem and very detailed thanks a lot

  • @THOMASHERNANDEZJR
    @THOMASHERNANDEZJR 2 года назад

    Hey man did exactly what you told me and saved myself 260 bucks. Thank you.

  • @-ms7r-
    @-ms7r- 3 года назад +8

    Hi, just replaced my stator. It's not necessary to drain the engine oil. I did mine without draining. I put it on rear paddock stand while doing the job. There was only residual oil. Just sharing.

  • @brayPURPLE
    @brayPURPLE 8 лет назад +5

    Thanks for the vid man. Gave me the confidence to change the stator myself!

  • @Radioactive_Slime
    @Radioactive_Slime 7 лет назад +1

    Thanks for the insight. I've got a Triumph Tiger 800 that is making some unusual sounds from the alternator/stator area. Another video I watched explained a similar problem and was due to the stator having one of the three mounting bolts loose. Makes a bit of vibes too.
    Your video at least helps a guy get the confidence to start dismantling before going to the dealer for $ervice.

  • @abrahamg4857
    @abrahamg4857 4 года назад +2

    Great video, man. I have a different bike but the info applies just the same.
    Appreciate it.

  • @Cam94killer
    @Cam94killer Год назад

    thanks brother.
    The dealership wanted 1200$ to fix this...im a newbie so i thought i couldnt do this... But you made it pretty simple..., im goung give it a go!
    Hopefullyyou answer some comments as i prob will have a few but thx

    • @Cam94killer
      @Cam94killer Год назад

      Some dude said you don’t have to drain the oil , if you just put it in the back stand is that true?

  • @jesusuribe1660
    @jesusuribe1660 3 года назад

    I appreciate the video bro. My 06 GSX-R600 also lost complete power. Didn't know what happened either cuz I replaced the batter and it still acts like it doesn't even have a battery with no juice whatsoever. I too will be replacing the stator and the rectifier with a rectifier relocation bracket

  • @emanuelcollazo5947
    @emanuelcollazo5947 8 лет назад +3

    great video man, thanks alot. I'll be replacing mines this weekend.

  • @Freeflying_kiwi
    @Freeflying_kiwi 5 лет назад +1

    After this video I now know what to do on my Zx10r 2008, thanks a lot.

  • @Hi-Viz-Ricky
    @Hi-Viz-Ricky Год назад

    GREAT VIDEO!!! I have a 07 Gsxr 600 and my bike died on me last night, and I plan on replacing my stator and my rectifier. I am not sure what the issue might be. I found out that the 30amp fuse blew, and as soon as it was replaced it blew again immediately. So if I do have a bad stator or rectifier, I will be using this video to replace them myself. thank you. you have a new sub. Salute.

  • @ryanmcmanus9665
    @ryanmcmanus9665 3 года назад

    Thanks bro
    I’m knew to working on motorcycles
    This video was very helpful

  • @alpha-bk3od
    @alpha-bk3od 7 лет назад +3

    thankfully for this tip men,u saved me a lot of stress lol 👍🏽

  • @sergeblote71
    @sergeblote71 6 лет назад +2

    Great video. I like the idea to check before taking everything out !! Thanks

  • @papigixxer
    @papigixxer 3 года назад +9

    Thanks for this video man You really explained everything perfectly And I did everything perfectly for my 2006 gsxr 750 thanks bro

    • @centersnare32
      @centersnare32  3 года назад +1

      No problem bro I am glad to help. I'm happy It worked out for you!

  • @Tay675
    @Tay675 6 лет назад +2

    Doing my 04 zx10r. Absolute nightmare. Tucked behind the starter, under the tank and the coolant housing in the way.

  • @antwan1131
    @antwan1131 7 лет назад

    This just happened to my 04 R6 was riding it home from work and the lights were dim when I started the bike then eventually shut off and I lost all power to the bike. Good video btw!

  • @arthurbarnard6575
    @arthurbarnard6575 4 года назад +1

    Great video, mine has just went out and was about to do it didn’t think I’ll I would need to drain the oil, thanks for the heads up it would have gotten messy.

  • @ni.gel_the_rookie_angler4645
    @ni.gel_the_rookie_angler4645 7 лет назад +1

    Thanks a lot bro for making this vlog. It helped me so much to change my stator on my K7. #Awesome #1Down5AllTheWayUP👊🏽✊🏽💨💯

  • @ebonhawk7801
    @ebonhawk7801 5 лет назад +1

    Thanks for the video! Gonna try this with my 02 sv650 should be pretty similar

  • @hoyt_arms
    @hoyt_arms 3 года назад +2

    Getting the cover back on is the hardest part lol I've fought them for half an hour before lol

  • @rcfrenzy6477
    @rcfrenzy6477 Год назад

    Thank you,your video helped me a lot.

  • @ricardoortiz5609
    @ricardoortiz5609 5 лет назад +2

    What a great video bro.. keep making more videos like this .. I’ll subscribe for sure.. !!

  • @insanegixxerdude486
    @insanegixxerdude486 5 месяцев назад

    hope you used some blue/red locktite on those stator mounting bolts!

  • @confidentiallyMe
    @confidentiallyMe 5 лет назад +32

    he left out the most critical part - how to remove the stator from the housing.

    • @cesarzapata9839
      @cesarzapata9839 3 года назад +1

      After unclipping the stator connection to the regulator/rectifier there are 3 (unknown size, but allen key) bolting the stator in the housing. Hope this helps. Ask more, I'm glad to help anyway possible.
      Good riding!

    • @beilerdude
      @beilerdude 3 года назад +1

      He says in the video to take the 4 allen bolts out 7:45

  • @sinister13cruz63
    @sinister13cruz63 8 лет назад +1

    it helped me alot thank you great video

  • @jayfbee
    @jayfbee 5 лет назад +3

    Yep some great info here.. Thank you.

  • @roudeepofficial
    @roudeepofficial 5 лет назад

    Many thanks 👍💻

  • @mashaisbaltodano3914
    @mashaisbaltodano3914 Год назад

    Great video very helpful thanks

  • @delanomuzik
    @delanomuzik 5 лет назад +9

    You should’ve sanded that gasket down, along with reapplying gasket sealer

  • @jordanritchie2969
    @jordanritchie2969 3 года назад

    This helped so much ,thank you !

  • @otravnicek
    @otravnicek 4 года назад

    Nice video will do this on Saturday 😀

  • @GameAddictHawaii
    @GameAddictHawaii 8 лет назад +1

    Thanks for the video, I have to replace mine now.

  • @TheJaggat
    @TheJaggat 3 года назад +1

    Thank you very much, great help for me. / Freddie the Swede.

  • @muhammet_kayaa
    @muhammet_kayaa 4 года назад

    Thank you. you greetings from Turkey

  • @kingspeedy0830
    @kingspeedy0830 7 лет назад

    hey man great video really helpful

  • @bryan2287
    @bryan2287 3 года назад +1

    Thanks for the video. Was there anything tricky about installing the gear back in...?
    Thanks In Advance

  • @abbas957
    @abbas957 4 года назад

    Very helpful ,good video

  • @alejandrotobienne4288
    @alejandrotobienne4288 2 года назад

    I love that exhaust. Wish I could find them.

  • @Dcoxtxful
    @Dcoxtxful 5 лет назад +4

    How many miles were on the bike when you had to swap out the stator? The battery didn't need to be replaced?

  • @d8thwonder
    @d8thwonder 7 месяцев назад

    Does the stator known issue goes all the way up to 2015 year model? I thought is was only those gsxr 2006-2009. Thanks

  • @boaterman
    @boaterman 7 лет назад

    i bought a rectifier and stator from amazon... i am selling the bike after the fix because im ready to step up. but alot of people have said the chinese ones were just as good as the oem ones

  • @ioanraresdeac5639
    @ioanraresdeac5639 4 года назад

    well done m8. Really helpful .

  • @iheartropetech9789
    @iheartropetech9789 4 года назад +2

    What if I don't drain my oil? I know it will leak from the stator housing. But does it affect anything?

    • @centersnare32
      @centersnare32  3 года назад

      It shouldn't be too bad of a problem just top off your oil

  • @Baletheory
    @Baletheory 2 года назад

    How often do you change your oil I see your using 10w40 300v and I see people talking how’s it’s for track use mostly and you have to change it frequently can you give me some info
    Thanks

  • @09ThunderOne
    @09ThunderOne Год назад

    can you do this without draining the oil? seems like the parts are higher than the oil pan.

  • @soxkekana6297
    @soxkekana6297 4 года назад +1

    Hi do you have to drain the oil when installing new stator???

    • @centersnare32
      @centersnare32  4 года назад +1

      Yes. But there is a way you can replace the stator without draining the oil. You lay the bike on the left side so the oil stays there while you work on it

  • @lm8098
    @lm8098 3 года назад +1

    Great informative video, one question; do you need to drain the oil to complete this job? (replacing the startor & RR), thanks in advance

    • @centersnare32
      @centersnare32  3 года назад +1

      Yes you need to drain the oil first. Or you can lean the bike on its left side and work on it

  • @sabinomartinez3047
    @sabinomartinez3047 8 лет назад +1

    how long did the cheap stator last

  • @YNTGUNS
    @YNTGUNS 6 лет назад +1

    Why did u drain the oil? My 07 zx10r I did not drain the oil. There was oil residue inside the cover but it wasn't filled with oil. Wierd if the Suzuki is filled with oil.

  • @willthethrill521
    @willthethrill521 8 лет назад +2

    great video!
    I hear you are supposed to put silicon where the 2 parts of the engine case meet to prevent oil leaks. You said you ran it a few hundred miles of obviously you didn't leak, but would you still recommend using silicon???
    THANKS

    • @joshrazo2695
      @joshrazo2695 4 года назад

      Yes

    • @centersnare32
      @centersnare32  3 года назад

      Silicon is optional typically for high temperature components

  • @technician006
    @technician006 6 лет назад +1

    Thanks. This video was really helpful. Just kidding, I have a Honda. I've never had a problem. Hahahaha. I was thinking about a gsxr 750 but found out even the latest bikes still have the same problems.

  • @Anactualrealperson
    @Anactualrealperson 10 месяцев назад

    Okay man I went to check out my stator and the 3 yellow wires were ripped so I respliced them and put it back together fully charged my battery and now the motor has trouble spinning or cycling, no the starter isint hung up, (sv650) btw it’s got a rod that goes through the gear to the fly wheel and starter, it’s acting like the battery is still dead.

  • @herculies2121
    @herculies2121 5 месяцев назад

    I know this is an old video but did the bike run kinda bogged down/hesitant between 1-4k rpms? But fine at 5k+ (Have the same bike) I think this is what's wrong with mine too. Then One day recently the battery died, put new one in after a ride it died pulling into my house.

  • @albertopd6912
    @albertopd6912 8 лет назад +2

    buen video,un saludo de españa

  • @MiguelSanchez-tj8nu
    @MiguelSanchez-tj8nu 2 года назад

    I have friends who say to put gasket sealer around the gasket. It looks like its not necessary?......Did you use any gasket sealer?

  • @dc4teggy99
    @dc4teggy99 5 лет назад +2

    Will this method work for a 2003 GSXR 1000 k3 ??

  • @kmonlife
    @kmonlife 4 года назад

    How did you loosen the screw under the filter, you make it seem so easy and accessible, any suggestions?

  • @Shoniks
    @Shoniks 3 года назад

    I have question. I have K8 gsxr 750 and notice problem on high rpm where i get choke when bike is hot ( its cut power ) and my headlight kinda flash a bit, its hardy noticed. Can a choke at high rpm be simbols of rectifier or i need to surch for problem somewhere else?

  • @tylerbrooks8381
    @tylerbrooks8381 6 лет назад

    I have a 2013 GSXR 750. My bike has sat in the garage for half of the year and I haven't started it in quite some time. I started it a couple weeks ago and the biked turned over but in idle sounded like it barely had power to continue running. Turned it off and tried to turn it back on and I just get a clicking noise. Although the lights and gauges all turn on. The Rectifier/Regulator is not located on the left side near the radiator. I looked for it under the gas tank and removed the air filter and still cannot find it. I still haven't checked my stator to see if that is the issue as to why the bike wont start but locating my rectifier/regulator seems to be half the battle if it needs to be replaced. Can you provide any insight as to where the rectifier/regulator is located on a 2013 GSXR 750? Also if the stator sounds to be the issue?

  • @JuanCruz-dn4ub
    @JuanCruz-dn4ub 3 месяца назад

    pusiste estator y regukador original o chino nuevamente

  • @McHornet7
    @McHornet7 3 года назад

    i have a suzuki bandit 650n, and the charge generating stator burned! do you know how many turns i should make on each coil?

  • @ItsAlwaysTech
    @ItsAlwaysTech 6 лет назад +1

    On sport bikes stators tend to last round 12-14k miles.

    • @centersnare32
      @centersnare32  6 лет назад

      I would say on average 30k miles or so for Japan bikes

    • @technician006
      @technician006 6 лет назад

      Unless you have a Honda.

  • @jhonng694
    @jhonng694 6 лет назад

    Do the screws for the cover have to be torqued ? Im wating for my parts to arrive i alredy took it apart injust have to put it back together

  • @Joncito_Gaming
    @Joncito_Gaming 2 года назад

    My stator and rectifier fried twice in a week … I’m beginning to think it was either cheap after market parts or the harness at this point

  • @AdrianRodriguez-pg9nr
    @AdrianRodriguez-pg9nr 8 лет назад +1

    Quick question, did you put a sealant around the stator wire? Where the rubber portion is on the stator cover? Because mine is leaking and i dont know if you can put anything on that rubber portion..?

    • @centersnare32
      @centersnare32  8 лет назад +2

      Adrian Rodriguez Yes! Put high temperature sealant on and around it. This is a common issue

  • @TheJyee23
    @TheJyee23 8 лет назад +1

    That was a quality video! Great job - really helpful.
    i have the same problem. Do you think its worthwhile changing the battery too?
    Also, besides the Stator and Rectifier, do you recommend i purchase any other parts besides the Gasket?

    • @TheJyee23
      @TheJyee23 8 лет назад +1

      +James Yee and just to confirm, the gaskets required are only these 2 parts right?
      GASKET, CLUTCH COVER (11482-01H00)
      GASKET (11483-01H00)
      Thanks for your help :)

  • @volasinga
    @volasinga Год назад

    Oh I do have 750 Suzuki 2007 I just changed the waterpump.. and when I started it won't start no lights and ignition light off..so but when I jumba to my car the lights go on and start beautifully ..and when I took of the jumba is dead ...idk wats wrong with it

  • @jaime_gsxr
    @jaime_gsxr 2 года назад

    Hello, did the regulator and the stator fail at the same time?

  • @bigdaddyktk24
    @bigdaddyktk24 8 лет назад +4

    how do you know if it's a bad rectifier/regulator but a good stator? Or do u just switch out both??

    • @streetstreettv3686
      @streetstreettv3686 8 лет назад +1

      Ryan Compton I'm trying to find this out also

    • @centersnare32
      @centersnare32  7 лет назад +6

      If one of those is damaged, chances are it damaged the other one due to irregular voltage. There are ways to check each individually to see which is broke but i'd change both anyways.

    • @stopitskiiiuuup4006
      @stopitskiiiuuup4006 5 лет назад

      Best to change both...so there wouldn't be any further issues

    • @Jonathan81284
      @Jonathan81284 5 лет назад

      Your better off changing both of them cause when one goes it puts extra stress on the other and it ends up going to or you'll just be doing the same thing a month down the road

  • @rubbergames5085
    @rubbergames5085 7 лет назад +2

    would this technique work for a 2007 honda cbr 600rr too?

  • @high_monkey
    @high_monkey Год назад

    I have the same problem with my 1100 w and i could not figure it out fully charged battery, drive and start with no problem, headlight started too dim down and would not start anymore.

  • @Alessandro-sf9qm
    @Alessandro-sf9qm 6 лет назад

    Hi! Just an ignorant question. Is it necessary to remove the oil to replace the stator?

    • @centersnare32
      @centersnare32  6 лет назад

      You can technically lay the bike on the clutch side (right) and you should be able to do it. If not just drain the oil and put it back after you've finished if it's not time to replace it

    • @Alessandro-sf9qm
      @Alessandro-sf9qm 6 лет назад

      Thanks a lot for the asnwer! You've been helpfull!

  • @averystarcher1843
    @averystarcher1843 8 лет назад +1

    Hey the video was great man. What kind of oil do you put in the stator. Thnks

    • @centersnare32
      @centersnare32  3 года назад

      You put regular oil in it you choose the viscosity

  • @russianbean1667
    @russianbean1667 3 года назад

    Just got my stator fixed best brand isn’t oem it’s ricks motorsports. Last way longer then the faulty oem.

  • @williamnunez5330
    @williamnunez5330 8 лет назад +1

    Hey Bud!! How long that bad chinese stator last on you?

    • @soxkekana6297
      @soxkekana6297 5 лет назад

      Bought a Chinese one would also wana find out how long

  • @gustavoacosta1034
    @gustavoacosta1034 6 лет назад +1

    Bery good my friend thank you

  • @01740746
    @01740746 4 года назад

    Should i replace the old gasket or will it work if i kept the old one ? In addition shou i replace the stator and the regulator replacing the stator would work ? Thank a lot man

  • @radicalkonrad765
    @radicalkonrad765 2 года назад

    Such a simple fix but goddamn annoying how common it is on 06-07 models, the stator will always need to be replaced way more common than other bikes

  • @alexo1226
    @alexo1226 7 лет назад

    Dope video thx for the info thx 👍🏼💯😏💯👍🏼

  • @luisgarcia7032
    @luisgarcia7032 4 года назад

    hello I have a question a week ago they put the alternator on my 2006 gsxr 600 and today it suddenly turned off and did not start, because it is again the alternator that broke

  • @HCH1996
    @HCH1996 8 лет назад

    Hello!
    I recently bought a 2007 modell Suzuki gsxr 600 voltage rectifier regulator from ricks.On the Box I got With it, it says that I should check the AC output of the stator, what voltage am I supost to get?I changed it and it was working for 2-3 weeks before it stopped, again...

  • @whiterazer1
    @whiterazer1 5 лет назад

    Is it normal that I have around 14.4v idling, but that when I play with the throttle the voltage can sometimes increase to slightly over 15v or drop down to 10v for a bit? Trying to figure out what is wrong. Couldn't start anymore after a long ride, so I had to jumpstart.

  • @chupilotv123
    @chupilotv123 Год назад

    How long did you use that Chinese stator?

  • @cesarzapata9839
    @cesarzapata9839 3 года назад

    @Centersnare32 where did you get your parts from? Are they reliable? Did you use your vin# going through Suzuki.
    My mechanic says to use vin# going through Suzuki. Your thoughts and reply are greatly appreciated guy

  • @fishnmaster421
    @fishnmaster421 3 года назад

    Mine is reading 11.99/12.00 at idle. And 13.44 reved up. So is mine bad?

  • @terronj21
    @terronj21 8 лет назад +10

    So when i put my new battery in it starts right up but after like 15 minutes of riding the battery dies... Is that the same problem you was having

    • @SpeakinWatsReal
      @SpeakinWatsReal 8 лет назад +3

      Terron type in "gsxr stator" in the search bar and it's the like the third video of a guy driving at night and his bike suddenly dies, it kind of putters as if you ran out of gas...same thing just happened to my bike I'm getting my stator and rectifier replaced this week. If your problem is similar to this than its definitely your stator

    • @terronj21
      @terronj21 8 лет назад +5

      yeah I just took mine apart it was my stator . so I went ahead and changed both the rectifier and my stator

    • @umirza786
      @umirza786 8 лет назад +1

      Having a similar issue, I've got a 2010 GSX-R 600 noticed I've come across very few 2010's in the states. However replaced the battery today, still not starting up I believe its the stator/rectifier issue. I've noticed before I ran into this issue I was getting a 5B blinking light where the temp gauge is. Not sure if its a related any ideas?
      Any help would be appreciated
      respectfully,

    • @umirza786
      @umirza786 8 лет назад +1

      Sorry its a 5D* blinking light, it was coming on after maybe 10-15 minutes of riding.

    • @rubin_k4234
      @rubin_k4234 8 лет назад +1

      usman mirza did you ever get that fixed on your bike? I have the same exact issue you have

  • @Jarheadftw
    @Jarheadftw Год назад

    Did you need to drain the oil?

  • @driftguy2day
    @driftguy2day 3 года назад

    So I just did this and even unplugged the cables and at idle sat at 13 so battery correct?

  • @mooncatt79
    @mooncatt79 2 года назад

    errrrrm beg to differ, when my 98 is off totally, i get 12,5v from the battery, when on idle i SHOULD be getting about 14v via battery volt meter check. but im still only getting 12.5v im UK btw. i should be gettin about 14v but i not, any ideas???

  • @patrickwilliams9290
    @patrickwilliams9290 6 лет назад

    Hey on ur stator on 92 gsx600f do you have to Darin the old first be4 i take the stator off

  • @littleraiver
    @littleraiver 6 лет назад +1

    Highly recommend using gloves when you do this. Also watch Revzillas video on how to do an oil change for some good info on changing oil. Otherwise great video. Thanks.

  • @ramenoodles75vods29
    @ramenoodles75vods29 3 года назад +1

    If I replace the stator do i need to do the regulator too

    • @centersnare32
      @centersnare32  3 года назад

      Usually if one is out, then you have to replace the other aswell