Novatec F192.SB Hub (How To Disassemble)
HTML-код
- Опубликовано: 8 сен 2024
- Welcome back everyone!
Let me start off by saying: This is the first hub I've ever worked on, and it was a PAIN to work on, lol.
(If you'd like to skip to the areas you need information on):
0:32 - F192.SB UM/Service Manual (sort of, more like a parts page)
0:48 - Measuring tape to measure axle for dropouts
1:21 - Removing grub screws (drive and non-drive side)
1:45 - Dowel Pin to remove axle
3:00 - Axle removal
3:32 - Bearing removal (not the best method but it worked for me)
5:10 - 10mm/11mm Explanation of why it doesn't work for this freehub
5:30 - 12mm Hex Key and Non-Drive Side Explanation on how to extract
6:36 - How to leverage breaker bar/Using inner tubes for grip against the wall (my own method)
7:32 - Removing the Stator Bolt/Freehub Body
I tried to gather all necessary information before attempting this, and fortunately, I found everything I needed through the interwebs and a tiny bit of YT (although I'll say that for this hub, there wasn't much on YT to be begin with).
So list of tools you'll need for this job:
2mm Hex Key (grub/stop bolts)
6mm Hex Key (or 10mm Hex Key if you aren't too worried about damaging the bearing and just want to punch it right out (this does work))
12mm Hex Key (stator bolt/washer)
www.amazon.com...
dchild=1&keywords=12mm+hex&qid=1597426858&sr=8-2
Plumbing pipe (I used a 1/2 x 24" pipe, this must fit the 12mm hex)
Dowel Pins (5/16 in size, Home Depot has these)
Rubber Mallet/Hammer (both would be good)
Everything in this list can be had at Home Depot/Lowes/Harbor Freight or local hardware store for relatively cheap (most of these you'll probably already have).
Parts on this hub:
Freehub Body Part #: FH-SH-S1-10S-2P-ST (contact Bike Fettish for this part as well as for other Novatec parts)
Sealed Bearings: NBK 6000-2RS (AMZ or eBay)
www.amazon.com...
www.ebay.com/i...
Here is the link to the other method I found online:
issuu.com/nova...
(this might work for you as well)
Hopefully all this information helps you guys out.
Took me forever to make this video because of the lack of information and the massive search for the correct info to avoid breaking anything, lol.
MAKE SURE TO LIKE/SUB/COMMENT!
-Rail The Gutter