Rakesh, thanks so much for this instructional video. It is extremely helpful and specifically for how to do a "work around" when your car did not have the cupholder light under the center panel. I'm going to try to do this as soon as I get the parts I ordered. Very much looking forward to adding the ambient LED lighting!
By far the best tutorial I’ve seen, really detailed, you put a lot of effort into that. I’m in the middle of doing this mod, I’ve got the cupholder factory fitted ambient lighting wire,it has power but it’s not lighting up the cupholder led or the ac led surround led. Any ideas anyone?
It’s factory fitted if you have the cupholder led and the led dash surround. You can run a wire from the footwell led to set it up. Plenty of tutorials on here!
hi, thanks for the video, the link for the wire is no longer available, can you send another link? I can't find this wire, only the smaller one for the one with cupholder light! thanks
Hello, thanks for the tutorial. So, we agree, the passenger's ambient light is completely removed? And so we can not put the 2 at the same time? Thanks in advance.
Thank you for this tutorial. I have followed the instruction, unlucky that my led panel will light up only when the door opened and will turn off when the door shut. Do you have any idea? Thank you in advance.
Thanks for the tutorial, just that i can't find the Y cable con Amazon, can you help me giving me a link so i dont make a mistake buying something elese?
Thanks for this tutorial! I tried it and the radio trim light works great when the door is open & the footwell light is bright. But when the footwell light dims after closing the door, the radio trim light switches off, anyone with a similar issue?
I have the same issue here. And also I cannot change the color of the trim between orange and blue. It keep orange color and when I switch color it seem to dim a little bit still keep orange color.
Great video and I am wanting to do this on my F82 M4 - Can you advise a link to the additional harness you fitted, as like your car mine doesnt have the cup holder LED. I tried the link below that you've provided but its going to a "cant find on eBay" page?
Hello, thanks for the tutorial. So, we agree, the passenger's ambient light is completely removed? And so we can not put the 2 at the same time? Thanks in advance.
Rakesh, thanks so much for this instructional video. It is extremely helpful and specifically for how to do a "work around" when your car did not have the cupholder light under the center panel. I'm going to try to do this as soon as I get the parts I ordered. Very much looking forward to adding the ambient LED lighting!
Awesome video man! Can’t believe my M Sport 440i didn’t have the cup light lol
Exactly!! Have you installed yours??
What if i dont even have the foot lighting?
Exactly my question 😅
How we can do?
Any solution?
I saw somebody mention on another video guide for this that you can use the wire that powers the door lock… but I dunno if I’d be that bold
very good thorough tutorial, exactly what I needed
By far the best tutorial I’ve seen, really detailed, you put a lot of effort into that. I’m in the middle of doing this mod, I’ve got the cupholder factory fitted ambient lighting wire,it has power but it’s not lighting up the cupholder led or the ac led surround led. Any ideas anyone?
whats the part number for that wire? you're probably going to need to code it with ISTA, I can help but I need that part number to get it as well
@@Ib3tr0lling it’s fixed, I used Ista to reset and clear the front electronic module memory which was full. all the lighting works now as it should
@@MrSprinter671 oh okay, thats great! do you know the part number for the wire? or part numbers? would appreciate it!
It’s factory fitted if you have the cupholder led and the led dash surround. You can run a wire from the footwell led to set it up. Plenty of tutorials on here!
Good video my f31 dont hv cupholder light and it doesnt have footwell light too car is a facelift lci
The extension wire is 3 or 4 pins? 1 male 2 females connectors? Thank you.
Did u figure out how ?
Thanks Bro i did that and my car has a new look , all the best ✌️
What is the length of the y ambient cable?
Is it possible to keep the light on the floor and the trim? Or when i connect the radio trim tool the lightnon the floor will not work any longer
Let us how do you turn light on? Because this you have power only when doors are open.
Same here
Really good tutorial
Yeah, very thorough! Have you installed yours? How is it?
hi, thanks for the video, the link for the wire is no longer available, can you send another link? I can't find this wire, only the smaller one for the one with cupholder light! thanks
Look for Y cable for bmw 4 series without ambient light on eBay
@@RakeshTalks ok, thank you!
Do you havenow a link ? I can’t find that on Ebay . Thank You
Hello, thanks for the tutorial. So, we agree, the passenger's ambient light is completely removed? And so we can not put the 2 at the same time? Thanks in advance.
Is that radio lightning standard on f30 lci models with lightning package?
Thank you for this tutorial. I have followed the instruction, unlucky that my led panel will light up only when the door opened and will turn off when the door shut. Do you have any idea? Thank you in advance.
i have the same issue, is someone know the answer
Has anyone found a solution to this??🙏🏾🙏🏾
Same here
Do you have a link for the panel…?
Does Lights turn on and turn off with light sensor?
Thanks for the tutorial, just that i can't find the Y cable con Amazon, can you help me giving me a link so i dont make a mistake buying something elese?
Do you cary out any work for anyone?
Great Tutorial, thank you so much❤
Thank you for the feedback 🙌🏽 have a good day
Can u send another link or the name of the cable I couldn’t find it please
But now you have don’t footlwillight anylonger at the passender site??
can i put this in my bmw 340i??
Donde consigue el cable, no lo veo por el enlace porque pone que no funciona
Thanks for this tutorial! I tried it and the radio trim light works great when the door is open & the footwell light is bright.
But when the footwell light dims after closing the door, the radio trim light switches off, anyone with a similar issue?
I have the same issue here. And also I cannot change the color of the trim between orange and blue. It keep orange color and when I switch color it seem to dim a little bit still keep orange color.
Has anyone figured this out????
Did you guys end up figuring this out?
Great video and I am wanting to do this on my F82 M4 - Can you advise a link to the additional harness you fitted, as like your car mine doesnt have the cup holder LED. I tried the link below that you've provided but its going to a "cant find on eBay" page?
Did you ever find anything? Im getting the same issue lol
I have a question, if instead of the light for the cup holder I have a usb port, is it the same method as if I had that light or is it different?
Same question from me also :)
I have no lighting package, so also no footwell lights.😢
Ah man, sorry to hear that. Maybe try if you can mount it to any of the idrive wire ?
Hello, thanks for the tutorial. So, we agree, the passenger's ambient light is completely removed? And so we can not put the 2 at the same time? Thanks in advance.
How to do it without light package? Haven't got footwell lights.
I have the same issue but I think I read previously you can take power from the hazard light switch to power the light.
@@ozboz33do you know how? Can we write private?
You do more Tutorials for the f36?
I have a F36 channel called WhosRak RUclips it but been super busy lately so haven’t had time to film anything
@@RakeshTalks oh perfect i subscibed it. any plans for next modifications? Maybe the OLED Rear Lights
Yeah, looking to get the m performance kit and a Gts taillight
Respect!
The link doesn’t work anymore. Have you got another link?
AliExpress does sell them
@@leonlee5169whats it called?
Never show that you power the cup holder lights tho
Any ppl possyble help
Me for serch linck for buy?