Thank you for the great video! I successfully retrofitted the following mirrors for my 2015 F22 coupe. I just followed your instruction and found only few differences between F30 and F22. In my case, it’s not necessary to remove the glovebox (removing the lower panel gives enough space). And the location of the ground point in the passenger door was a little bit different but pretty easy to find it. I think I couldn’t have done without your video. Thanks again for your great work!!
UPDATE: - Added coding instructions in the video description - Added download links for the E-Sys in the video description I can do retrofits for you, if you are from EU and willing to travel to my city (Udine, Italy)
Thank you for this I. Managed to complete in only 2 days 😂😂 I mistakenly plugged to power wire & k-lin the wrong way round, I thought I had a major fault as by doing this knocked out all power to driver’s door. 1 day later & checking virtually all fused relays, I did a complete wire chase almost as if I was starting again, this mirror plug was the last chek & found my stupid error! Swapped two wires over & perfect!👏👏 😮💨
One of the best "how to" videos on RUclips. If you decide to pick up the pace on the channel, I'll definitely subscribe. You've got the basis for a very successful channel, just need a regular upload schedule (even just 2 video uploads per month would be enough to significantly increase your subscriber count). Good luck.
Ciao! Bellissimo video, super dettagliato. Mi puoi per favore spiegare come codificare l’apertura/chiusura con singola pressione del bottone della chiave, anziché tenere premuto, usando Esys? Grazie mille!!
Hi. You’ve done an amazing job. I have a bmw g30 and the mirrors are not folded,and i want to put folding mirrors I’m gonna follow the same steps as you or for this model it’s different. Thank you
Hello. I have a 2017 320i and I just purchased the mirrors and switch. Will I have to do the same thing on the passenger side like u did as well? I do have memory/power seats on my car. This looks a little more involved than I thought. Lol. Now that I have the parts I’m a little worried about the passenger connections.
Complimenti, ottimo lavoro molto ben documentato. Peccato che mi abbia fatto venire una scimmia :). Due doamde, se possibile: si riesce a distinguere gli specchietti fotocromatici, visti a fuori? Il rivestimento incollato sulla porta passeggero, sotto al pannello, si toglie facilmente o si disfa come con le altre auto? grazie . Ps. I colori Red-grey e white-brown li consigli per avere gli stessi dello schema oem?
Thanks for the video. I have one question: My car does not have the interior auto-dim feature. I think if this would threw error code once I vo code 430 in the sapa element. Since on high mirror version , the inner interior auto-dim sensor would be normally used to dim the exterior mirror. @Ace320 any thought on that?. Retrofit on a F20 LCI version right now
Ciao, il pin2 del connettore verde della scatola fusibili, è sempre +12 o solo sotto chiave? mi servirebbe una presa diretta per alimentare anche una dashcam.. grazie
Great job! I will use this when I'm going to retrofit mine. How did you code the mirror dip when reverse? Do you have memory seats? I have no memory seats and could not code mine. I'm using e-sys, what did u change in de fem module? Thank you!
Just completed the Power Mirror retro and found that the 3 spare wires on passenger side all end up at the drivers switch. You just need to splice Power Lin and Earth onto them and code work great.
Hi. Yes I know it is possible doing it like that. But I wanted 100% OEM-like (no cutting, no splicing wires) I wanted to have it just like on the BMW scheme.
Hello Cassie. Can u elaborate on this please? Like in what step did u splice the wires. I’d much rather splice the existing wires going to the driver’s switch than to run new cabling to fuse box etc. thanks.
@@AlmightyEye when you fit the mirror on the passenger side you will see the 3 wires concerned on the plug . I think it was pins 2.3.4 . Power Lnbus Earth On the drivers side they appear again but on my car one of them Linbus had changed from blue yellow to blue green I think , its been a while. But using a tester you an trace them out . One prob you have now is the TIS diagrams are not freely available any more from BMW . So you tee in the power & earth to the power & earth feeding the drivers switch using solder or small connectors then splice the Linbus wire which as mentioned has changed colour but by putting a tester on the middle wire on passenger mirror you will find it on the drivers switch . These 3 wires need removing from their old position on drivers switch and will only connected to the 3 wires going into drivers switch . The car will then need the power mirror option coded in.
No, my F30 from factory tilts curb side only ( mirror switch has to be set set to driver) I retro fitted my f22 as described in this video & thought I had a fault until checking F30!
This is a great tutorial. I just did the retrofit today and only few things went wrong. - the red clip from fusebox connector fell in engine bay. I can’t reach to it but the connector seems to fit just fine. Do I need to buy a new one, or can I do without? - only the passenger side folding works, driver side doesn’t work. Also, electric mirror adjustment doesn’t work on driver side. I thought maybe the new doorswitch is broken, but mirror adjustment doesn’t work either with old swich. What could go wrong? Blinker works fine, so connector seems plugged in correctly. I have an f31 (LCI) from December ‘15. Thanks again for the great content!
@@crazymuffin_x3234 No, you have to add VO. I code with Esys, maybe you can also Code all single parameters with BimmerCode but I don’t know the parameters. With Esys it’s very easy and you dont need to search every single parameter. Download for Esys is in the Video Description, with BimmerCode you can’t add VO
I followed these instructions to my BMW 4 series F32 and got to say this was very detailed and made it very easy for me to retrofit power folding mirrors to my 2015 bmw thank you very much for posting this video. The only question i have I could not get the mirror to tilt when reversing, its been coded to allow it to do so but wont work any ideas?? The mirrors all work and adjust from panel on both mirrors?
Hello and thank you for kind words. For your question about mirror tilt when reversing, try following: When you put the car into reverse, on the mirror adjust switch, put it on the driver's side mirror to enable mirror tilt, if you want to switch off mirror tilt, put it on passenger side. (This is for LHD, if you have RHD car, then try it in opposite way i.e - put it on passenger side for ON, driver's side to turn it OFF) You can try this video as well: ruclips.net/video/_GtTCe0ehU0/видео.html
Hi, great video, just ordered all the parts, I noticed that you mentioned drivers side is plug and play, is this true for UK models or will it be passenger side?
Just saw this and I am impressed . One thing do the three redundant wires go to the FEM if so could I jut move them to the appropriate terminal. Thanks Ed
Hi again sorry for another question Can I test the new switch and basic mirror function (not Folding) on the plug and play drivers side before Coding s430 or do all functions like heating and adjusting the glass depend on S430 Thanks again.
@@Acelele320 Thanks mirrors turned up today will try asap. I will pull power from cigarette lighter at back of arm rest that is never used also have Linbus cct from my old heated passenger seat from Fem as I now have full electric M4 that uses Kcan 2 bus. so I wont have to take the Fem plug apart. Thanks again for the reply
Hi Ace, Question: why do you have to connect the 3 cables? is that for the door operation or also for the key operation? I only have the folding mirrors and therefore no door controls. thanks for your comment.
Hi. Those 3 wires are: - Power from the fuse - Signal wire that communicates with the car - Ground wire I didn't understand what do you mean by "I only have folding mirrors and no door controlls"? - If you have power folding mirrors from factory, you should have the folding button on the window controll switch on the driver's doors.
@@Acelele320 Thanks for your fast comment. Unfortunately I don't have folding mirrors from the factory, but I bought these without door controls, so only 2 folding mirrors. I thought i could just install this and then code it and then it would work (coding on the key, close and open), so that's why i was wondering if it's really necessary to add these 3 cables on the right side? Thanks for your comment.
I’m doing this on my car this coming Sunday. I have a couple of questions I’m hoping you can shed some light on. 1, you are working on a LHD vehicle but mine is RHD, will I need to route cable from passenger side to drivers side to reach the front fuse box? 2, I have bought a window switch with the button on to fold mirrors. I have noticed that the pin connections are totally different to my current one. Will this just be plug and play once coding has been applied or do I need to do something to it? 3, how do I code single press of key fob? That’s all for now :)
Hi. 1. Fuse box is located in the same place on the LHD and RHD cars and you need to connect wire from fuse box to the passenger side. 2. Window switch with power folding button has LESS wires then basic one. Don't worry, once coded it will work. 3. I have coded it with bimmercode app.
Ciao complimenti veramente dettagliato in tutto, però non ho capito cosa bisogna fare sullo specchio sinistro, ho visto che lavoravi solo sul destro. Ti ringrazio anticipatamente.
Hi, thank you for your comment. Unfortunately I don't have F10 or any other BMW to show this project bcs this is not my job, it's just my hobby. I modify my own car and I post some interesting projects here on YT that might be helpful to other ppl. I can do this retrofit on any BMW, but the problem is, I don't own other BMW's.
Thank you for the comprahensive video. I`ve just ordered folding mirros for my car and looking forward to follow this. Am I worng to think that wiring from door side isnt necessary except the ground as from what I see you unplugged wires and plug back new ones in the same location on the doors both end? So I guess thats only if you looking to get the right colour coded wires?
Hi. Yes, you are wrong, bcs old wores weren't connected to the FEM and Fuse Box. The way I whowed in the video is how it's done in factory, so no worries, just follow it up and everything will work as it should.
Pin 4, 5 and 6 on mirror connector can stay and on the other end on big plug move them to pin12 and 14. Wire of pin 4 can be cutted near ground wire and connecred to it. So much quicker and less hassle.
@@Leyosempire You can do it in that way, but I wanted it to be OEM. Also, If I would do it again, It would take me 2 hours. This project is not time consuming.
Can u please elaborate on this a little bit. I’m getting to do this retrofit but the passenger side wiring seems a little too involved. I prefer to do it your way.
Hello. Unfortunately it is not the same process for the F48 as it is for the F30, but at least I can give you wiring diagram so you try to figure out by yourself. - Basic mirrors: i.imgur.com/P6qfqMn.jpg - Power folding mirrors: i.imgur.com/JvJWtjl.jpg
Thanks a lot for your quick reply and helping me with the wiring images. I’ll see what I can manage. I hope I can follow your process for a while... Have a good one.
I didn't get the step before connecting brown ground wire .i.e where to connect two wires red and white-brown wire that is connected to the harness from one side.
Pozdrav druze, zamenio sam module na retrovizore, ubacio ove elektricne koji se sami sklapaju. E sad levi radi super, ali desni ne poklapa. Takodje ne radi dugme koje pomera stakla levo desno, vec samo moze gore dole. Lik kod kojeg sam kupio kaze da treba sve to da se iskodira i da drugacije to nece raditi. Da li ie potrebno kodiranje?
@Mistrr hydra That Pin is Female conntact Pin, at 0:11 you have the full list of parts. Part no.3 are the female pins. I have left OEM part number, with that part number you can order as many you want.
Hi Ace 320 I have an F30 that does not come with folding mirrors. Do I have to buy a new set of mirrors or parts to make them fold? If I need parts to make them fold, can u send me the part number. Thanks.
Hi, this is a great video. Looking to do this on my F20 M140i. Just looking for the part numbers for the contacts and wiring as can’t seem to find it anywhere. Also does the fuse for the drivers mirror supply the passenger mirror or do you need an extra fuse? Thank you
I have already left PN for the Pins at the beginning of the video. For wires, I found them from wrecked BMW F series on scarp yard's. But if you wish, you can buy them from BMW: - Red-Black cable: 61121391684 - Red-Yellow: 61126902614 - Grey-Green: 61126908725 - Brown: 61126908726 You can use the power from them driver's side instead of connecting new one to the fuse box, it will work, but I wanted everything to be 100% OEM, so I have followed wiring diagram and connected new wire to fuse box.
There is already bunch of videos on YT about E-Sys coding. For power folding mirrors, you don't need E-sys Pro or Premium. I have left a download video in the description, also you can find instructions about installing and using E-sys.
Hi Ace320, Great video, thank you.... this is almost exactly what I have so desperately been looking for, only because I am looking to do the same on my 2008 E82.. So, daft question as you’ve already listed the models in your description, but I’m going to ask anyway... Do you know if your tutorial is the holy grail of folding mirror retrofits on BMW’s or do I need to keep searching? i.e, will all the pins and connectors be the same do you know? Again, great tutorial 👍🏽
Hi. This tutorial is only for the BMW F series. They are changeing patern from generation to generation. So this video will not help to the people with E series (old gen) or G seriers (next gen).
hello, thank you again for your video my retrofit is almost finished. the s430 option must be enabled even if I do not have it or is it just because yours are equipped with the feature? thank you for your help
430 option is power folding mirrors, if you install mirrors from basic to power folding and don't code 430, they will not automaticlly fold, bcs car doesn't know that he has new mirrors. So it's a must.
Hi. Yes, I'm pretty sure that 5 Pin is folding, because my car came without folding function and mirrors where 6 Pin, and when I bought power folding mirrors they were 5 Pin.
Ace320 yes you're right but it seems to me that some mirrors that have 5 pins are not necessarily retractable. I have the classic rear view mirror think your installation is there or I have to do otherwise? Thank you again for all.
@@benjaminmanal8269 Every 5 Pin mirror is foldable. Some 6 Pin mirrors are also foldable, BUT not every 6 Pin is foldable. Cars with memory (electric) seats and foldable mirrors are 6 Pin. There could be also 5 Pin non-oldable, but those are very, very rare. Difference between foldable and non-foldable mirror from inside is that foldable mirror has aluminium base and non foldable plastic base (You need to remove mirror cap to see it) i.imgur.com/HRMKR1W.jpg
@@benjaminmanal8269 It is possible, but auto-dim function will not be available. Because there is a sensor in rear view mirror, and basic rear view mirror don't have it. Auto-dim function standard on every power folding mirrors, but it is independent of rear view mirror - without that sensor, auto-dim function will not work. There are vehicles who comes with rear view mirror who are auto-dim but without power folding mirrors option (Like my car).
Hi, very interesting video! A little question: do the external auto dip works only with an internal auto dip mirror ? So if Y've the internal manual model I had to change it...
Hi, thank you. Yes, external mirrors auto-dip function works only if car has internal auto-dip mirror, because internal mirror has a sensor that triggers dimm function.
@@Acelele320 But retrofit the manual internal one to an auto-dip is so difficult? I think that there should be not only 12 v and - but a Can signal to connect, maybe.
@@VITALIBRUNO Interior auto-dip mirror has a 3-pin connector, but unfortunately I cannot tell you the correct wiring diagram cos the web site that provides diagrams has been shut down. Try googling it.
@@Acelele320 It's always me, with another pc and account. Do You refer to this one? ibb.co/Jj692dV If so I'm not able to understand it :) and translate it in electrical connections.
Hi, I'm interested in how automatic mirror dimming works? Have you changed the rearview mirror in the cabin and is there a need to connect those two mirrors?
Pozdrav drug. Ne nisam mjenjao unutrašnje špiglo jer to sam već imao iz fabrike. Ukoliko auto ne posjeduje unutrašnje špiglo sa auto-zatamljivaljem i on se mora ugraditi da bi vanjski retrovizori funkcionisali kako treba. I da, moraju se ugraditi električni retrovizori ako hoćeš auto-dim iz vana. Ako hoćeš samo iznutra onda je dovoljan samo unutrašnji zamjeniti.
@@Acelele320 Thanks for your reply. And does the installation have to go through to connect the interior mirror with the exterior mirrors, or is it enough to just replace them and damage the car?
@@benjamintahirovic762 Ako vec imaš unutrašnje špiglo sa auto-dim onda se samo ugrade vanjski retrovizori i ne moraš ih spajati sa unutrašnjim, već na FEM, Osigurač i uzemljenje. (3 žice, kao što je i pokazano na videu) Inače sam iz BiH ali živim u Italiji, grad Udine, Friuli-Venezia Giulia
@@Acelele320 Komsije smo, ja sam iz Srbije, Novi Pazar ako ti je poznato.. Nemam unutrasnji retrovizor sa auto-dim, vec onaj obicni. To znaci da se moraju spajati? Ako moze jos jedno pitanje, gde si nabavio retrovizore i koliko si ih platio?
Rather than isolating the 3 pins which become redundant, why not repurpose them by repinning them so you don't have to feed another partial loom through the door?
Hello, do you know if it’s possible to swap only the glass and how to wire it, keeping manual folding body? Or it’s necessary to swap all and do with electric folding mirrors? I’ve done interior dimming already... Thanks
Ace320 hi just looking at the diagram and on the a73a plug (mirror plug) the basic mirror diagram has ground on pin 3 could I just connect together pin 3 from basic diagram to pin 4 from power fold diagram for ground?
@@sarooprince You can't, because power folding mirror has 2 motors, 1 for power fold and 2nd for mirror glass, so 2 motors 2 ground wires. On the diagram that I put on video is shown only wiring for power fold motor (3 wires). There are 2 more wires missing for 2nd motor, but that wiring is already installed in every F30
Not possible because other stuff will stop functioning, such as auto-dip function and adjusting mirror glass with a window controller. You would have to full convert to the basic mirrors. Pro tip: Replace the faulty mirror and that's it. You can find them used on ebay for about 150€/ piece
Overall it is helpful video. Just let me know where to connect two wires , red and white-brown that is connected to the harness from one side. Thank you
Hi. Red-Grey wire is Power from fuse box to the mirror. White-Brown wire is K-Lin from FEM You connect them to doors plug 8:30 see there is Pin 12 and 14, those are 2 Pins are Red-Grey and White-Brown wire.
Ok thanku sir My f30 doesn't have power folding mirror before but i wana add power folding mirrors, so it will be the same steps as i saw in the video?
Hi. That wire is power for the mirror. It goes from the fuse box to the door connector and from door connector to the mirror. Watch carefuly and you will see how it's done.
@@Acelele320 i tried to do u today but got stuck on the fem connector. There are 2 small tabs i guess u need to push to slide the green and blue connector out but i wasn't able to do so, any tips?
Can i code the folding mirror to see down when i put the car in reverse? Do i need anything special or a simple code to make it point down to see the border? thanks a lot!
That is called "curb in reverse" and it's available only for power folding mirrors, if you have them, then you already have this feature, if you don't have power folding mirrors, then you can't code it.
@@Acelele320 One question, do i need to install esys launcher premium and create token and pin , or I don’t need this step and can continue to the rest of installation instructions? Because i didn’t find any premiumsetup folder..
Hi. To make mirrors fold on lock, you need to do additional coding, which can be done with Bimmercode or E-sys. If everything is installed correctly and coded correctly, mirros should work, just like shown in the video.
Ace320 hi I had the fem and power the wrong way round in the driver door plug and door door side loom. now the driver door mirror is folding correctly but the passengers side won’t fold or tilt the only thing working is the indicator on this motor any idea?
@@sarooprince So, since the driver's side is working, it could be you did bad wiring, or bad ground connection or faulty motor on the passenger side. Did you tried to adjust the mirror glass, trying to move it up or down with controller on driver's side?
@@Acelele320 Thanks, i have added 430 to vo using vvdi tool and programmed fem module, as i dont have esys, all is working but i have errors in cas, 1 for wrong door switch and errors about lin in mirrors and now have error when start car that camera guidance system is inactive.
@elfuego99000 Hi. No, I didn't change harness in the switch, as I said in the video, driver's side is plug and play, all wires are already there, the only difference is that basic mirrors have more wires then the power folding ones.
@@Acelele320 if you are not far away from Paris, I mean I can come to your city and meet you somewhere so you will help me to retrofit ACC and blind spot.
@@elfuego99000 Am about 1.230 km away from Paris, so I don't think it's worth it. About the blind spot, did you get all parts needed for the retrofit? You need 360 parking sesnors, mirrors and re-code REM.
Ciao, grazie per la risposta. Io sono di Padova. Tu? Mi sono sforzato di capirne qualcosa con Esys ma non so cosa devo modificare e perché. Su bimmercode trovo solo le opzioni per chiudere e aprire gli specchi da tele ma quello che intendi tu per codifica credo sia qualcosa che viene prima e legato proprio alla fem e gli specchi in se. Mi puoi scrivere in privato di dove sei (magari ci troviamo) o come devo fare per codificare gli specchi? Conta che ho già comprato tutto, pure il cavo ENET me sono bloccato :/ Grazie.
Ace320 Ciao e grazie, si fino a lì ci sono arrivato ma è proprio come funziona il programma e cosa codificare che non capisco. Se ti va faccio io un giro a Udine magari nel weekend così ci conosciamo e mi spieghi che fare. Tanto ho tutto per collegarmi all’auto. Scrivimi su whats magari 3405138570 Samuele. Grazie 👍🏻👍🏻
Hi, ambient light was more complicated to install harness. I have Install both ambient light and folding Mirrors. I try to code but when I connect with E sys, I only have dot in caf file so I cannot find the options to change. Did you get the same problem?
hello , i did that successfully , but i have a problem :( i cant see in passenger side when i am riding a car:( its so far, may be the seller sent me mirror with right driver side ? please help . thanks
Where are you from? EU or UK? If you are from EU and you have bought mirrors from UK seller, then you have got RHD mirrors, and in EU you need LHD mirrors. Also, on the mirror itself is a sign for the drivers side with big "L" and on thr passanger "R", if it's opposite, you have wrong mirrors.
Thank you for the great video!
I successfully retrofitted the following mirrors for my 2015 F22 coupe. I just followed your instruction and found only few differences between F30 and F22. In my case, it’s not necessary to remove the glovebox (removing the lower panel gives enough space). And the location of the ground point in the passenger door was a little bit different but pretty easy to find it.
I think I couldn’t have done without your video.
Thanks again for your great work!!
UPDATE:
- Added coding instructions in the video description
- Added download links for the E-Sys in the video description
I can do retrofits for you, if you are from EU and willing to travel to my city (Udine, Italy)
Ciao giovane! Sono ad Udine anche io per un po'. Come si puo comunicare fuori di RUclips?
I wish you were local to me. I would have come down now..lol
ciao, cosa dev codificare su esys per apire/chiudere gli specchi con singola pressione tasto chiave, anzichè tenere premuto? grazie mille!!
Thank you for this I. Managed to complete in only 2 days 😂😂 I mistakenly plugged to power wire & k-lin the wrong way round, I thought I had a major fault as by doing this knocked out all power to driver’s door. 1 day later & checking virtually all fused relays, I did a complete wire chase almost as if I was starting again, this mirror plug was the last chek & found my stupid error! Swapped two wires over & perfect!👏👏 😮💨
* ps for some reason not tilting? Coded for tilting with bimmer code ? I suppose I can live without that!
@@mdawson101probably need the 430 VO code look at bmw doctor
One of the best "how to" videos on RUclips. If you decide to pick up the pace on the channel, I'll definitely subscribe. You've got the basis for a very successful channel, just need a regular upload schedule (even just 2 video uploads per month would be enough to significantly increase your subscriber count). Good luck.
Thank you for your hard work in putting together this video, I truly appreciate it.
You legend, thanks for putting this guide together
Ciao! Bellissimo video, super dettagliato. Mi puoi per favore spiegare come codificare l’apertura/chiusura con singola pressione del bottone della chiave, anziché tenere premuto, usando Esys? Grazie mille!!
Thank you for a great video :) Can i use this method for my 2013 f30, with electric seats with memory?
Hi. You’ve done an amazing job. I have a bmw g30 and the mirrors are not folded,and i want to put folding mirrors I’m gonna follow the same steps as you or for this model it’s different.
Thank you
I can’t believe a car costing this much the folding mirrors aren’t standard at factory.
I’m glad my F30 m sport came with it
Nothing is standard from factory, everything is optional, even with M Sport package.
@@Acelele320
I bought my M sport used from BMW. Mirrors were folding on long button press. BimmerCode fixed that issue for me 👌👌
Hello boss great video
I want tk retrofit headlights halogen to led style . Do yo have any video on that ?
I need this one too
Hello. I have a 2017 320i and I just purchased the mirrors and switch. Will I have to do the same thing on the passenger side like u did as well? I do have memory/power seats on my car. This looks a little more involved than I thought. Lol. Now that I have the parts I’m a little worried about the passenger connections.
Complimenti, ottimo lavoro molto ben documentato. Peccato che mi abbia fatto venire una scimmia :). Due doamde, se possibile: si riesce a distinguere gli specchietti fotocromatici, visti a fuori? Il rivestimento incollato sulla porta passeggero, sotto al pannello, si toglie facilmente o si disfa come con le altre auto? grazie . Ps. I colori Red-grey e white-brown li consigli per avere gli stessi dello schema oem?
Thanks for the video. I have one question: My car does not have the interior auto-dim feature. I think if this would threw error code once I vo code 430 in the sapa element. Since on high mirror version , the inner interior auto-dim sensor would be normally used to dim the exterior mirror. @Ace320 any thought on that?. Retrofit on a F20 LCI version right now
Ciao, il pin2 del connettore verde della scatola fusibili, è sempre +12 o solo sotto chiave? mi servirebbe una presa diretta per alimentare anche una dashcam.. grazie
Great job! I will use this when I'm going to retrofit mine. How did you code the mirror dip when reverse? Do you have memory seats? I have no memory seats and could not code mine. I'm using e-sys, what did u change in de fem module?
Thank you!
Just completed the Power Mirror retro and found that the 3 spare wires on passenger side all end up at the drivers switch. You just need to splice Power Lin and Earth onto them and code work great.
Hi.
Yes I know it is possible doing it like that. But I wanted 100% OEM-like (no cutting, no splicing wires) I wanted to have it just like on the BMW scheme.
Hello Cassie. Can u elaborate on this please? Like in what step did u splice the wires. I’d much rather splice the existing wires going to the driver’s switch than to run new cabling to fuse box etc. thanks.
@@Acelele320 That is the way BMW do it thats why there is only 1 fuse for mirrors in fuse box .
@@AlmightyEye when you fit the mirror on the passenger side you will see the 3 wires concerned on the plug . I think it was pins 2.3.4 . Power Lnbus Earth On the drivers side they appear again but on my car one of them Linbus had changed from blue yellow to blue green I think , its been a while. But using a tester you an trace them out . One prob you have now is the TIS diagrams are not freely available any more from BMW . So you tee in the power & earth to the power & earth feeding the drivers switch using solder or small connectors then splice the Linbus wire which as mentioned has changed colour but by putting a tester on the middle wire on passenger mirror you will find it on the drivers switch . These 3 wires need removing from their old position on drivers switch and will only connected to the 3 wires going into drivers switch . The car will then need the power mirror option coded in.
Could you not just use the three redundant wires and reposition them in the connectors? Rather than adding three new wires?
Hello!!! Passenger side mirror also tilts down when reversing?
No, my F30 from factory tilts curb side only ( mirror switch has to be set set to driver) I retro fitted my f22 as described in this video & thought I had a fault until checking F30!
What software are people using to code these codes to their cars? Ace320 got me wanting to to everything
This is a great tutorial. I just did the retrofit today and only few things went wrong.
- the red clip from fusebox connector fell in engine bay. I can’t reach to it but the connector seems to fit just fine. Do I need to buy a new one, or can I do without?
- only the passenger side folding works, driver side doesn’t work. Also, electric mirror adjustment doesn’t work on driver side. I thought maybe the new doorswitch is broken, but mirror adjustment doesn’t work either with old swich. What could go wrong? Blinker works fine, so connector seems plugged in correctly.
I have an f31 (LCI) from December ‘15.
Thanks again for the great content!
can i do the coding also with Bimmercode ? do you now how ?
ACE i did it today 😄 it takes about 4h. Thank you so much for sharing. Wait for the next retrofit Video.
Awesome! Am glad you did it :D
There are more retrofit videos coming soon, stay tuned!
did you coding with bimmercode ?
@@crazymuffin_x3234 No, you have to add VO. I code with Esys, maybe you can also Code all single parameters with BimmerCode but I don’t know the parameters. With Esys it’s very easy and you dont need to search every single parameter. Download for Esys is in the Video Description, with BimmerCode you can’t add VO
I followed these instructions to my BMW 4 series F32 and got to say this was very detailed and made it very easy for me to retrofit power folding mirrors to my 2015 bmw thank you very much for posting this video.
The only question i have I could not get the mirror to tilt when reversing, its been coded to allow it to do so but wont work any ideas?? The mirrors all work and adjust from panel on both mirrors?
Hello and thank you for kind words.
For your question about mirror tilt when reversing, try following:
When you put the car into reverse, on the mirror adjust switch, put it on the driver's side mirror to enable mirror tilt, if you want to switch off mirror tilt, put it on passenger side. (This is for LHD, if you have RHD car, then try it in opposite way i.e - put it on passenger side for ON, driver's side to turn it OFF)
You can try this video as well: ruclips.net/video/_GtTCe0ehU0/видео.html
Hi, how do you code single press to fold mirrors?
Do you know if this also works for the F46?? Thanks
Hi, great video, just ordered all the parts, I noticed that you mentioned drivers side is plug and play, is this true for UK models or will it be passenger side?
Hi, thanks.
Drivers side is also PnP for UK cars.
@@Acelele320 hey, just thought I would let you know I completed the retrofit and all works great, thanks again
@@peterdowding8786 Awesome!👍
I'm glad I helped you.
@@peterdowding8786 did you have electric seats or the manual ones. I am also from the uk looking to do this.
@@praveenn5415 no I didn't have electric seats, all went well with the install. I followed the steps exactly and it worked first time
CAN you tell me ,more renseignements,pleased
Just saw this and I am impressed . One thing do the three redundant wires go to the FEM if so could I jut move them to the appropriate terminal. Thanks Ed
Those 3 wires are connected to the driver's doors, so you can't connect them to the FEM.
@@Acelele320 Thanks.
Hi again sorry for another question Can I test the new switch and basic mirror function (not Folding) on the plug and play drivers side before Coding s430 or do all functions like heating and adjusting the glass depend on S430 Thanks again.
@@cossied01 Am not sure, but I think adjusting mirror and heating will work without coding.
@@Acelele320 Thanks mirrors turned up today will try asap. I will pull power from cigarette lighter at back of arm rest that is never used also have Linbus cct from my old heated passenger seat from Fem as I now have full electric M4 that uses Kcan 2 bus. so I wont have to take the Fem plug apart. Thanks again for the reply
Hello can u please show how to upgrade folding mirrors on bmw f11 2015
Hi Ace,
Question: why do you have to connect the 3 cables? is that for the door operation or also for the key operation?
I only have the folding mirrors and therefore no door controls. thanks for your comment.
Hi.
Those 3 wires are:
- Power from the fuse
- Signal wire that communicates with the car
- Ground wire
I didn't understand what do you mean by "I only have folding mirrors and no door controlls"?
- If you have power folding mirrors from factory, you should have the folding button on the window controll switch on the driver's doors.
@@Acelele320 Thanks for your fast comment.
Unfortunately I don't have folding mirrors from the factory, but I bought these without door controls, so only 2 folding mirrors.
I thought i could just install this and then code it and then it would work (coding on the key, close and open), so that's why i was wondering if it's really necessary to add these 3 cables on the right side?
Thanks for your comment.
@@boygoossens2937 No it's not possible do it like that.
Window controll switch is necessary.
Realizado fantástica guía saludos!!💪
Great video 👍🏻
Are there 6 pins on the passenger side? Or are only 5 of the 6 cables in the connector using?
It's 5 Pin on both sides, on passanger side you can leave that 6th Pin, bcs it's not in use.
Just follow the video and it will 100% work.
Hello what about an F11-2015/16 year
This method is for f series without memory seats, correct?
Yes
I’m doing this on my car this coming Sunday. I have a couple of questions I’m hoping you can shed some light on.
1, you are working on a LHD vehicle but mine is RHD, will I need to route cable from passenger side to drivers side to reach the front fuse box?
2, I have bought a window switch with the button on to fold mirrors. I have noticed that the pin connections are totally different to my current one. Will this just be plug and play once coding has been applied or do I need to do something to it?
3, how do I code single press of key fob?
That’s all for now :)
Hi.
1. Fuse box is located in the same place on the LHD and RHD cars and you need to connect wire from fuse box to the passenger side.
2. Window switch with power folding button has LESS wires then basic one. Don't worry, once coded it will work.
3. I have coded it with bimmercode app.
So the right mirror is closer to window then the left mirror?
@Ace320 7:00 What is the use for these original pins 4,5,6?
Can you explain to me how I recognize folding and dimming mirrors? At the pin assignment? Would like to buy used
Ciao complimenti veramente dettagliato in tutto, però non ho capito cosa bisogna fare sullo specchio sinistro, ho visto che lavoravi solo sul destro. Ti ringrazio anticipatamente.
Ciao. Specchio sinistro è Plug & Play, non devi fare nulla su di lui. Basta che metti nuovo.
Hi where is this place to get the power mirrors to install on bmw x4
Hello great video much respect👍🏻👍🏻 can you show on bmw F11-2015 or some link where to find... thanks...
Hi, thank you for your comment.
Unfortunately I don't have F10 or any other BMW to show this project bcs this is not my job, it's just my hobby. I modify my own car and I post some interesting projects here on YT that might be helpful to other ppl.
I can do this retrofit on any BMW, but the problem is, I don't own other BMW's.
Is it possible to fold the mirrors using key fob only without having to change the cluster switch?
Thank you for the comprahensive video. I`ve just ordered folding mirros for my car and looking forward to follow this. Am I worng to think that wiring from door side isnt necessary except the ground as from what I see you unplugged wires and plug back new ones in the same location on the doors both end? So I guess thats only if you looking to get the right colour coded wires?
Hi.
Yes, you are wrong, bcs old wores weren't connected to the FEM and Fuse Box.
The way I whowed in the video is how it's done in factory, so no worries, just follow it up and everything will work as it should.
Pin 4, 5 and 6 on mirror connector can stay and on the other end on big plug move them to pin12 and 14. Wire of pin 4 can be cutted near ground wire and connecred to it. So much quicker and less hassle.
@@Leyosempire You can do it in that way, but I wanted it to be OEM.
Also, If I would do it again, It would take me 2 hours. This project is not time consuming.
Ace320 fair enough.
Can u please elaborate on this a little bit. I’m getting to do this retrofit but the passenger side wiring seems a little too involved. I prefer to do it your way.
And dimming mirror option? If not orginal in car.
Hi, Is it possible to code 430 before to install the folding button? I've coded 430 but when I read it the code 430 is no longer there
Is this the same for right hand drive vehicles just being on the opposite sides?
Yes, that's correct.
Hi there for the window switch to work do you need to code it in or does it work straight after plugging in
Hi.
It needs to be coded.
@@Acelele320 what should I use like what program
@@yaqoobrahman4546 E-sys
Hello, can i use this Method to retrofit the mirrors on my F32?
G’day Mate, wonderful video you made and shared with everyone.
Does this work the same on a X1 F48 2015 Aussie model? Thanks so much again.
Hello.
Unfortunately it is not the same process for the F48 as it is for the F30, but at least I can give you wiring diagram so you try to figure out by yourself.
- Basic mirrors: i.imgur.com/P6qfqMn.jpg
- Power folding mirrors: i.imgur.com/JvJWtjl.jpg
Thanks a lot for your quick reply and helping me with the wiring images.
I’ll see what I can manage.
I hope I can follow your process for a while...
Have a good one.
Nice well done could you please advise for a Bmw E88 Convertible or any Bmw 1 series E8 models as they should all be the same much appreciated.
This retrofit video is only for F series BMW (1, 2, 3 and 4) for E series I'm not sure.
Ace320 thats fine keep up the good work if you find out how to for the e series power Fold mirror 3 pin conector then please let me know thanks
I didn't get the step before connecting brown ground wire .i.e where to connect two wires red and white-brown wire that is connected to the harness from one side.
Pozdrav druze, zamenio sam module na retrovizore, ubacio ove elektricne koji se sami sklapaju. E sad levi radi super, ali desni ne poklapa. Takodje ne radi dugme koje pomera stakla levo desno, vec samo moze gore dole. Lik kod kojeg sam kupio kaze da treba sve to da se iskodira i da drugacije to nece raditi. Da li ie potrebno kodiranje?
How do they call the small pin connector that is in the fem connector? So the pin that goes inside the blue socket at 5:19
@Mistrr hydra That Pin is Female conntact Pin, at 0:11 you have the full list of parts.
Part no.3 are the female pins.
I have left OEM part number, with that part number you can order as many you want.
@@Acelele320 Thanks mate!
Hi Ace 320
I have an F30 that does not come with folding mirrors. Do I have to buy a new set of mirrors or parts to make them fold? If I need parts to make them fold, can u send me the part number. Thanks.
Hi.
You need to buy a new set of power folding mirrors.
(You can buy used mirrors as well)
@@Acelele320 Thanks. Much appreciated. Keep making great videos.
Hello. Can you tell me if this upgrade is also for F31?
Thanks in advance.
Regards Eugen
Hi, this is a great video. Looking to do this on my F20 M140i. Just looking for the part numbers for the contacts and wiring as can’t seem to find it anywhere. Also does the fuse for the drivers mirror supply the passenger mirror or do you need an extra fuse? Thank you
I have already left PN for the Pins at the beginning of the video. For wires, I found them from wrecked BMW F series on scarp yard's.
But if you wish, you can buy them from BMW:
- Red-Black cable: 61121391684
- Red-Yellow: 61126902614
- Grey-Green: 61126908725
- Brown: 61126908726
You can use the power from them driver's side instead of connecting new one to the fuse box, it will work, but I wanted everything to be 100% OEM, so I have followed wiring diagram and connected new wire to fuse box.
Can you please make video in detail how to code thanks
There is already bunch of videos on YT about E-Sys coding.
For power folding mirrors, you don't need E-sys Pro or Premium.
I have left a download video in the description, also you can find instructions about installing and using E-sys.
how can I test if autodimming works? its kinda hard to tell
Hi there for the drivers side after installing the switch and the power folding mirror will it work or will it need coding
Hi.
It need to be coded.
@@Acelele320 using e-sys?
@@yaqoobrahman4546 Ofcourse
Hi do you have to have electric seats (comfort mode) for this to work? Or just rain sensor, and auto dim centre mirror?
Thanks
Hi.
You don't need to have electric seats fro this retrofit.
@@Acelele320 thanks for quick reply, I definitely going to try this because of you 👍🏼
Hi Ace320,
Great video, thank you.... this is almost exactly what I have so desperately been looking for, only because I am looking to do the same on my 2008 E82..
So, daft question as you’ve already listed the models in your description, but I’m going to ask anyway... Do you know if your tutorial is the holy grail of folding mirror retrofits on BMW’s or do I need to keep searching? i.e, will all the pins and connectors be the same do you know?
Again, great tutorial 👍🏽
Hi.
This tutorial is only for the BMW F series.
They are changeing patern from generation to generation.
So this video will not help to the people with E series (old gen) or G seriers (next gen).
Ciao, ti posso chiedere dove hai preso tu i pin maschio/femmina e quello per la scatola fusibili?
hello, thank you again for your video my retrofit is almost finished. the s430 option must be enabled even if I do not have it or is it just because yours are equipped with the feature? thank you for your help
430 option is power folding mirrors, if you install mirrors from basic to power folding and don't code 430, they will not automaticlly fold, bcs car doesn't know that he has new mirrors.
So it's a must.
Ace320 thanks for your answer.
do you use Carly for coding?
I dont see this option in Carly, s430 its auto dip no ?
Hi, is the coding free?
Hello, thank you for the video. are you sure the 5 pin is for folding because for me it's the opposite. 5 pin is the basic
Hi.
Yes, I'm pretty sure that 5 Pin is folding, because my car came without folding function and mirrors where 6 Pin, and when I bought power folding mirrors they were 5 Pin.
Ace320
yes you're right but it seems to me that some mirrors that have 5 pins are not necessarily retractable.
I have the classic rear view mirror think your installation is there or I have to do otherwise? Thank you again for all.
@@benjaminmanal8269 Every 5 Pin mirror is foldable. Some 6 Pin mirrors are also foldable, BUT not every 6 Pin is foldable. Cars with memory (electric) seats and foldable mirrors are 6 Pin.
There could be also 5 Pin non-oldable, but those are very, very rare.
Difference between foldable and non-foldable mirror from inside is that foldable mirror has aluminium base and non foldable plastic base (You need to remove mirror cap to see it)
i.imgur.com/HRMKR1W.jpg
Ace320 you think its possible to retrofit of i dont have rear mirror « automatic » ?
Thank you
@@benjaminmanal8269 It is possible, but auto-dim function will not be available. Because there is a sensor in rear view mirror, and basic rear view mirror don't have it.
Auto-dim function standard on every power folding mirrors, but it is independent of rear view mirror - without that sensor, auto-dim function will not work.
There are vehicles who comes with rear view mirror who are auto-dim but without power folding mirrors option (Like my car).
Great video 🤗 how do I get mine to close with one click of the key fob. Currently it’s long press
Fold/Unfold Mirrors with single press (FDL Coding):
- FEM_BODY 3053 (KOMFORTOEFFNUNG_FB) -> Aktiv
- FEM_BODY 3053 (KOMFORTSCHLIESSUNG_FB) -> Aktiv
- FEM_BODY 3053 (KOMFORTSCHLIESSUNG_PA) -> Aktiv
- FEM_BODY 3110 (ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN) -> Aktiv
- FEM_BODY 3110 (ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN) -> Aktiv
- FEM_BODY 3053 (KOMFORT_SCHLIESSEN) -> werte = 00 (0F = 1.5 sec delay / 00 = No delay)
Hi, very interesting video! A little question: do the external auto dip works only with an internal auto dip mirror ? So if Y've the internal manual model I had to change it...
Hi, thank you.
Yes, external mirrors auto-dip function works only if car has internal auto-dip mirror, because internal mirror has a sensor that triggers dimm function.
@@Acelele320 But retrofit the manual internal one to an auto-dip is so difficult? I think that there should be not only 12 v and - but a Can signal to connect, maybe.
@@VITALIBRUNO Interior auto-dip mirror has a 3-pin connector, but unfortunately I cannot tell you the correct wiring diagram cos the web site that provides diagrams has been shut down.
Try googling it.
@@Acelele320 It's always me, with another pc and account. Do You refer to this one? ibb.co/Jj692dV If so I'm not able to understand it :) and translate it in electrical connections.
@@Acelele320 The web site new*** could be opened using a Vpn via russian server :)
My friend, did you know how i can locate the ACC wire?
Hi, I'm interested in how automatic mirror dimming works? Have you changed the rearview mirror in the cabin and is there a need to connect those two mirrors?
Pozdrav drug. Ne nisam mjenjao unutrašnje špiglo jer to sam već imao iz fabrike.
Ukoliko auto ne posjeduje unutrašnje špiglo sa auto-zatamljivaljem i on se mora ugraditi da bi vanjski retrovizori funkcionisali kako treba.
I da, moraju se ugraditi električni retrovizori ako hoćeš auto-dim iz vana. Ako hoćeš samo iznutra onda je dovoljan samo unutrašnji zamjeniti.
@@Acelele320 Thanks for your reply. And does the installation have to go through to connect the interior mirror with the exterior mirrors, or is it enough to just replace them and damage the car?
@@Acelele320 I ako mogu znati odakle si, mozda smo u blizini negde?:)
@@benjamintahirovic762 Ako vec imaš unutrašnje špiglo sa auto-dim onda se samo ugrade vanjski retrovizori i ne moraš ih spajati sa unutrašnjim, već na FEM, Osigurač i uzemljenje. (3 žice, kao što je i pokazano na videu)
Inače sam iz BiH ali živim u Italiji, grad Udine, Friuli-Venezia Giulia
@@Acelele320 Komsije smo, ja sam iz Srbije, Novi Pazar ako ti je poznato.. Nemam unutrasnji retrovizor sa auto-dim, vec onaj obicni. To znaci da se moraju spajati? Ako moze jos jedno pitanje, gde si nabavio retrovizore i koliko si ih platio?
On a right hand drive what side would need wiring?
Passenger side.
LHD and RHD doesn't change anything, passenger side always needs new wiring in both cases
@@Acelele320 so just follow your video just on the other side of the car?
@@michaelmccrossan1119 yes
Rather than isolating the 3 pins which become redundant, why not repurpose them by repinning them so you don't have to feed another partial loom through the door?
You know what is the use of those original blue pins?
Exactly using same pins help and less work feeding it around the doors
@@OscarAMartinit’s for manually adjusting your mirrors with the buttons
Hello, do you know if it’s possible to swap only the glass and how to wire it, keeping manual folding body?
Or it’s necessary to swap all and do with electric folding mirrors?
I’ve done interior dimming already...
Thanks
Hello.
Power folding mirrors are necessary for auto-dimm function
Can I please get a link to the two wiring diagrams please
Put video on full screen, 1080p resolution and take a screenshot and that's it.
I'm currently not able to upload the diagrams.
Ace320 sorry yes I changed the resolution thank you again for that reply and sorry
Ace320 hi just looking at the diagram and on the a73a plug (mirror plug) the basic mirror diagram has ground on pin 3 could I just connect together pin 3 from basic diagram to pin 4 from power fold diagram for ground?
@@sarooprince You can't, because power folding mirror has 2 motors, 1 for power fold and 2nd for mirror glass, so 2 motors 2 ground wires.
On the diagram that I put on video is shown only wiring for power fold motor (3 wires). There are 2 more wires missing for 2nd motor, but that wiring is already installed in every F30
Ace320 but for both mirrors can I not use the same ground? What I was thinking was to put a pin in pin 3 then solder the other end of Pin 3 to pin 4.
How i know if my car support auto folding side mirror?
Hi is this for rhd or Lhd vehicles and is there any difference?
Hi.
It is both for RHD and LHD, you just need to get correct parts for your vehicle, there is no difference in installation process.
Ace320 so for rhd vehicle the mirror is always plug and play and passenger needs wiring correct. Thank you for quick reply
@@sarooprince Yes, driver's side is always PnP, no matter is it RHD or LHD, and addition wiring harness always needs to be added on passenger side.
Ace320 thank you
Hi at 7:54 how do you remove the plug from its housing/surrounding please
Hi.
Pull it up and it should pop out from the housing.
I have an f30 with faulty power mirrors and I want to code it as if it’s a basic side mirror so that it wouldn’t be functional, is that possible?
Not possible because other stuff will stop functioning, such as auto-dip function and adjusting mirror glass with a window controller.
You would have to full convert to the basic mirrors.
Pro tip: Replace the faulty mirror and that's it.
You can find them used on ebay for about 150€/ piece
Overall it is helpful video. Just let me know where to connect two wires , red and white-brown that is connected to the harness from one side.
Thank you
Hi.
Red-Grey wire is Power from fuse box to the mirror.
White-Brown wire is K-Lin from FEM
You connect them to doors plug 8:30 see there is Pin 12 and 14, those are 2 Pins are Red-Grey and White-Brown wire.
Ok thanku sir
My f30 doesn't have power folding mirror before but i wana add power folding mirrors, so it will be the same steps as i saw in the video?
@@toorbrother7772 Of course, this retrofit tutorial is for F30 after all.
Thanks
Another thing, actually my new power folding mirrors have cameras as well. How they gona work , like where to do there wiring connections for that
Thanks for the Video, where do you put the red wire at 4:45??
Hi.
That wire is power for the mirror.
It goes from the fuse box to the door connector and from door connector to the mirror.
Watch carefuly and you will see how it's done.
Ace320 ok i see it :-) 06:10 Pin 14. perfekt thank you again
Hi i want to do this for my f20 lci, do u know if the fuse boxes and fem are located in the same area?
Hi.
Yes they are.
@@Acelele320 how long do u think those cabled need to be? I can buy them per meter, how much of each should i buy to be sure?
@@TheOppolite Around 2-3m per cable.
If you wanna be super safe, buy 5m per cable, you will probably use it in the future for something else.
@@Acelele320 ty very much for the video and the quick responses my man!
@@Acelele320 i tried to do u today but got stuck on the fem connector. There are 2 small tabs i guess u need to push to slide the green and blue connector out but i wasn't able to do so, any tips?
Thank you so much for all its work !!!
1000 thanks for your share 👍👍👍
Hi.
You're welcome, I'm glad I helped you. Enjoy. 😊
Ciao, è proprio necessario il ground lato spechietto? Anche se é il sesto pin che non é connesso a nulla essendo a 5 pin gli specchietti?
Ciao, si la terra si deve collegare per forza, perché quella altra che dicevi tu serve per il motorino del vetro.
@@Acelele320ok! Grazie mille, gentilissimo!
Can i code the folding mirror to see down when i put the car in reverse? Do i need anything special or a simple code to make it point down to see the border? thanks a lot!
That is called "curb in reverse" and it's available only for power folding mirrors, if you have them, then you already have this feature, if you don't have power folding mirrors, then you can't code it.
@@Acelele320 thanks :( i have the normal ones, that is wierd... but this is it. Have agreat day.
@@Acelele320 thanks again for the video,
Do you know why when I edit caf file I don't have description of functionality? I only have dot.
@@Acelele320 I don't think that's true, I have "passenger tilt down when reversing" but not power folding.
Did you demount it yourself or did you buy it like that ?
I did all the job. Mirrors were assembled when I bought them.
Hi Ace320...Can I apply this retrofit on F39 ?
Hi do the mirrors open when closed automatically at 20 mph ?
Hi. Yes, they open automaticlly.
Hallo, the last file which you say that we need it when installing Esys is missing when trying to download.. Any option please ?
Hello, download link is fixed.
@@Acelele320 Thank you!!
@@Acelele320 One question, do i need to install esys launcher premium and create token and pin , or I don’t need this step and can continue to the rest of installation instructions? Because i didn’t find any premiumsetup folder..
Hi just completed this retrofit and coding. Mirrors not folding with lock and nothing on driver door switch is not working at all any ideas?
Hi.
To make mirrors fold on lock, you need to do additional coding, which can be done with Bimmercode or E-sys.
If everything is installed correctly and coded correctly, mirros should work, just like shown in the video.
Ace320 hi I had the fem and power the wrong way round in the driver door plug and door door side loom. now the driver door mirror is folding correctly but the passengers side won’t fold or tilt the only thing working is the indicator on this motor any idea?
@@sarooprince So, since the driver's side is working, it could be you did bad wiring, or bad ground connection or faulty motor on the passenger side.
Did you tried to adjust the mirror glass, trying to move it up or down with controller on driver's side?
Ace320 yes tried that it won’t move up or down with driver side control but passenger side moves fine
@@sarooprince Wait, passenger side mirror glass moves when you try to adjust it?
where can i buy the kit from?
Would this be the same on an f33?
Yes, this video is suitable with all 1,2,3 and 4 series (F generation only)
Can this be done for a MINI COOPER COUNTRYMAN 2019 F60?.
Hi.
I don't know, I only have experience with BMW.
Will this work on a f10 2012 bmw series 5 528i
Hello, It will not work for F10, this is only for 1, 2, 3 and 4 series BMW (F generation)
Hi, to code s430 on f32 is it just in fem or other modules? Thanks
Hi.
Add 430 to FA and code FEM VO.
So yes, FEM only.
@@Acelele320 Thanks, i have added 430 to vo using vvdi tool and programmed fem module, as i dont have esys, all is working but i have errors in cas, 1 for wrong door switch and errors about lin in mirrors and now have error when start car that camera guidance system is inactive.
Great video! thanks!
Hi good job,
I am trying to add folding mirrors and add blind spot. Did you also change the harness for the switch?
Thanks for the video
@elfuego99000
Hi. No, I didn't change harness in the switch, as I said in the video, driver's side is plug and play, all wires are already there, the only difference is that basic mirrors have more wires then the power folding ones.
@@Acelele320 is it possible to come to you to help for some retrofit?
@@elfuego99000 What do you mean by "come to you for help" like come in my house or?
@@Acelele320 if you are not far away from Paris, I mean I can come to your city and meet you somewhere so you will help me to retrofit ACC and blind spot.
@@elfuego99000 Am about 1.230 km away from Paris, so I don't think it's worth it.
About the blind spot, did you get all parts needed for the retrofit? You need 360 parking sesnors, mirrors and re-code REM.
How you ever managed to find this all for 150eu is beyond me
Ciao, grazie per la risposta. Io sono di Padova. Tu? Mi sono sforzato di capirne qualcosa con Esys ma non so cosa devo modificare e perché. Su bimmercode trovo solo le opzioni per chiudere e aprire gli specchi da tele ma quello che intendi tu per codifica credo sia qualcosa che viene prima e legato proprio alla fem e gli specchi in se. Mi puoi scrivere in privato di dove sei (magari ci troviamo) o come devo fare per codificare gli specchi? Conta che ho già comprato tutto, pure il cavo ENET me sono bloccato :/ Grazie.
Ciao, io sono di Udine.
Il coding si puo fare solo con E-Sys.
Ti serve il PC, E-Sys e ENET cavo.
Ace320 Ciao e grazie, si fino a lì ci sono arrivato ma è proprio come funziona il programma e cosa codificare che non capisco. Se ti va faccio io un giro a Udine magari nel weekend così ci conosciamo e mi spieghi che fare. Tanto ho tutto per collegarmi all’auto. Scrivimi su whats magari 3405138570 Samuele. Grazie 👍🏻👍🏻
i hoped it will be plug and play , but its not ... nice video anyway
Hi, ambient light was more complicated to install harness.
I have Install both ambient light and folding Mirrors.
I try to code but when I connect with E sys, I only have dot in caf file so I cannot find the options to change. Did you get the same problem?
hello , i did that successfully , but i have a problem :( i cant see in passenger side when i am riding a car:( its so far, may be the seller sent me mirror with right driver side ? please help . thanks
Where are you from? EU or UK?
If you are from EU and you have bought mirrors from UK seller, then you have got RHD mirrors, and in EU you need LHD mirrors.
Also, on the mirror itself is a sign for the drivers side with big "L" and on thr passanger "R", if it's opposite, you have wrong mirrors.
Ace320 I am from Israel , i bought it in ebay ! the left side is ok , the right side have a problem , i cant see good , its far
@@hamdandaralghoul7054 But what is country of origin of those mirrors? Where the seller is from? Also Israel or?
Ace320 he is from Lithuania :(
@@hamdandaralghoul7054 I think you should contact the seller and ask him are the mirrors from Left-Hand Drive car (LHD) or Right-Hand Drive (RHD).
Perfect 👌
Cooll. Thank you, man. 🇺🇦