Boa noite amigo no caso o tranf porte da p15 e feito no castelo de fabrica tipo assim e um furo no bloco e as verdacoes e no cano e na disparadora e isso amigo?
Good video. Very comprehensive. However, I didn't see you degassing the resovoir. How did it have all air gone? Did you just cock and dry fire it away?
Ran it down and if I remember rightly there may have been a port where you can lever the valve spring open to make sure. I’d have to check the vid to be sure though as it was a while ago
If you get a good one they are good, you get them tuned to make them very good. Like most guns, there's akaways a bad batch and this one was very very bad, so bad in fact that I haven't shot anything with it other than test targets since I had it three years or so back. It has been in the cupboard ever since.
Somebody nows how i can extract the regulator?? Or how i can put more power whitout extract it. I think unscrew no more than 1/4 whit a long screwdriver from the manometer side of the tube. Please i need help in this part!!!
custom bolts hi pal thanks for the the reply I’m not sure the hammer screw is flush I put 210 in before had about 50 shots went to load it then all air just started to come out was like coming out off barrel then it leaks but still fills up once past 120 it’s okay I don’t really no too much about pcp
OK, first question, why have you adjusted the hammer screw and what power is the gun running at now? If its pissing out of the barrel then the valve stem is open. Couple of things, the hammer spring is stronger than the valve spring but that's a rare one as the pressure holds it shut and the hammer spring, in your case, would need to push against 120 bar to hold it open. Likely thing is either the valve stem either has a bit of shit in it stopping it closing sub 120 bar or if there is an o ring it seals against then the o ring is kaput and its the sheer force of above 120 making it seal.
I'd never let him work on a toy gun. What a mess no wonder he having problems with the gun. State on bench all that mess old dust and crap going back in the gun. My dad got p15 had it for 7years now and not one o-ring leek or problems . At all never been cleaned in side and still going strong. Same as the day he got it new .
Dont you love a know it all smart arse that makes themself look a tit. Shame you missed the bit where it didnt work from new hence this video. I guess you also missed the bit where i mention people that whinge should do a video themselves, please do, i shall look forward to you giving something positive to the world unlike your father 20 odd years ago.
Cant view it...dont have FB anymore. Purchased this one too last week, came in yesterday. Check it out: www.luchtbuks.net/index.php?/topic/113085-spa-p15-22-artemis-p15/?s=8b1339e1e34a3ee20dbafdccf519a077
Boa noite amigo no caso o tranf porte da p15 e feito no castelo de fabrica tipo assim e um furo no bloco e as verdacoes e no cano e na disparadora e isso amigo?
7 minutes 19 seconds, the tapered spring is the wrong way round, youtube did away with annotations so i cant amend it.
hello friend .. shot valve needles ?? Are you missing in your country? because here in mine you don't find that kind of thing ..
pkdobad shot valve needle?
Great
Good video. Very comprehensive. However, I didn't see you degassing the resovoir. How did it have all air gone? Did you just cock and dry fire it away?
Ran it down and if I remember rightly there may have been a port where you can lever the valve spring open to make sure. I’d have to check the vid to be sure though as it was a while ago
I want to buy this rifle is it good for a traveling hunter or not
If you get a good one they are good, you get them tuned to make them very good. Like most guns, there's akaways a bad batch and this one was very very bad, so bad in fact that I haven't shot anything with it other than test targets since I had it three years or so back. It has been in the cupboard ever since.
Transfer port looks very big? What caliber it is for?
.22
custom bolts need to turned down transfer port to 4mm max for .22! Looks like 6mm transfer port!
Jewel ask Artemis, it’s their design and running at 11.4.
Hi, you mentioned the Artemis group... Which forum is it?
Daan's Kanaal Facebook group mate.
m.facebook.com/groups/248676878958940
I wish they would approve my request. I just bought the p10 and want all knowledge now ha ha .
Somebody nows how i can extract the regulator?? Or how i can put more power whitout extract it. I think unscrew no more than 1/4 whit a long screwdriver from the manometer side of the tube.
Please i need help in this part!!!
Hi pal my p15 is leaking all it’s air when gets down to 120
Hmm... Valve spring too weak? Hammer spring too strong?
custom bolts hi pal thanks for the the reply I’m not sure the hammer screw is flush I put 210 in before had about 50 shots went to load it then all air just started to come out was like coming out off barrel then it leaks but still fills up once past 120 it’s okay I don’t really no too much about pcp
OK, first question, why have you adjusted the hammer screw and what power is the gun running at now? If its pissing out of the barrel then the valve stem is open. Couple of things, the hammer spring is stronger than the valve spring but that's a rare one as the pressure holds it shut and the hammer spring, in your case, would need to push against 120 bar to hold it open. Likely thing is either the valve stem either has a bit of shit in it stopping it closing sub 120 bar or if there is an o ring it seals against then the o ring is kaput and its the sheer force of above 120 making it seal.
custom bolts I’ve never touch the hammer screw it’s sub 12 lb only had rifle a couple off month and it just done it yesterday when at range
Just reread it mate, sorry. The depth of the hammer screw can vary on power setting.
I'd never let him work on a toy gun. What a mess no wonder he having problems with the gun. State on bench all that mess old dust and crap going back in the gun. My dad got p15 had it for 7years now and not one o-ring leek or problems . At all never been cleaned in side and still going strong. Same as the day he got it new .
Dont you love a know it all smart arse that makes themself look a tit. Shame you missed the bit where it didnt work from new hence this video. I guess you also missed the bit where i mention people that whinge should do a video themselves, please do, i shall look forward to you giving something positive to the world unlike your father 20 odd years ago.
Cant view it...dont have FB anymore. Purchased this one too last week, came in yesterday. Check it out:
www.luchtbuks.net/index.php?/topic/113085-spa-p15-22-artemis-p15/?s=8b1339e1e34a3ee20dbafdccf519a077
from where i can buy those plastick washers ?
which ones mate?
Think he means the ones on the hammer spring
@@jasonbuchanan7591 ah, i made them to help with the twist of the spring upon compression and decompression,.
@@ellelephantdo you make parts for us common ppl
@@jasonbuchanan7591 Dont get more common than me mucker, i'm on facebook mate under custom bolts, its a rareity im on here.
احسنت رائع
I took it brand new and i have many problems. Loosing air and secong its FAC in 25 cal and i have only 600 fps no 800. I lost my money.
Navaxo Alàska why can’t you return it?