Just installed my RBP Stealth Running boards on my 2018 Ram 2500 CTD. It's a simple install. If you've ever taken apart the interior of a vehicle and wrenched on a motor not a big project. The wiring loom connectors were very well made and it was easy to work with. Plenty of zip ties for this project are included! I took about 5 hours to install with the extra help from my 5 year old son in my garage. What I found to be the hardest part of the install was threading the motor mounting bolts into the back plate that sits inside the Ram frame. If you have the factory nuts inside the frame I'm sure it's much quicker. One simple change I'd make for the wiring is to have the passenger side magnet contact wire moved to the passenger side of the wiring loom. Drill through that floor and connect near the B pillar on that side. Currently, it goes through the driver side floor. Having it routed through the passenger side floor would prevent having to fish it under the seats and console inside the truck. I'd say it would be a cleaner install. These steps have been sturdy and are very clean system. No adjustments needed and they work great. Happy I cancelled my AMP order and bought the RBP running boards. Oh and I don't have to buy a splitter for my OBDII port.
@@kristielee5797 I’m shopping for my 2016 but the americatrucks.com website lists them as 2010-2021. I’m confident the basic cab sheet metal has remained unchanged yet from 4th to 5th gen.
We keep our vehicles for 15-25 years. I drive 5-7K miles per year since I retired. My 23 Tacoma TRD Off Road, double Cab, w/ premium & technology pkgs with a 6' bed. I plan on keeping it until I am dead
So, what you’re saying is RBP sponsored this video. I personally love my AMP boards on my ‘17 Ram, and I don’t have the magnets and exposed wiring in my door jambs.
I just put my amp streps on my 18’ 2500 and I also love them. Especially the obd plug and play to activate the doors. These RBP are sweet looking also but the attention to details with the wiring had me go with AMP.
Ok, maybe “attention to detail” were the wrong words to use for what I was referring to, but not having to add magnets and just having to “plug and play” with the amp steps makes it seem easier to install. But your steps look amazing and your video are very enjoyable to watch.
Ryan, glad you had a great experience with these boards. Mine was not so good... had to use the plates they provided and chase the threads on ALL of them, not to mention the 2 bolts that go through the pinch weld on all the motors, which I had to drill out because I had no holes. This should have been a 3 hour install like you said but the garbage I had to work with made it much more difficult than it had to be. The wiring was the least painful I have ever dealt with though which made it easy to button up. My wife has a JKU that I'll be putting these on...I sure hope they do a little quality control with their hardware like they have with their wiring harness!!! Thanks for the heads up on these boards though...they are nice when you wade through the b.s.!!!
Great Product just got mine today to bad its raining outside. I found time to install them when the rain stopped and I'll do the electrical tomorrow.lol
I love the design of these steps on how thin they are. What I don't like is the extra wire for each door. More wire more problems uou think they would figure out how to plug into obd2 port.
Just installed my RBP Stealth Running boards on my 2019 Ram 2500 yesterday. They look great but really wish @Rolling Big Power would have designed/planned these a bit better on the gas models. That front motor and assembly hits the frame mounted vibration dampening unit on both sides. Reality is if they would have just built it with the motor on the opposite side of the assembly it would have cleared. Other than that, install was fairly straight forward and the quality seems to be much better than AMP. Assemblies seem much more heavy duty.
Questions 1) What is the drop with those installed? I have a 6inch lift with 35s. Stock boards are just not cutting it. Question 2) I’m worried about the wiring that could be kicked, or pinched. I have a kid and dog in and out all the time. Please let me know about and wear of tear on them. Love this video, detailed man and solid. I’m in the market and seriously considering these now.
After watching this, I wish I would have bought these instead of the amp steps. The amps were such a pia to install. It required very precise alignment to prevent it from hitting the bottom of the cab. Not to mention, I paid 1300 shipped and it has one less motor than the RBP's.
How far down to the bottom of the step from your truck . I’m trying to figure out if I will be able to lift my leg that high to get up on my truck , I use a step ladder now
Hey Ryan, I realized this video is 2 years old. Is RBP planning to make a kit for the 2021-22 Ford Bronco? These seem to be a better value than the AMP ones.
Looks great. I like how they don't use the obd port(I don't want a splitter), but for the cost, I have to wait. I have other things that need to done before a new set of boards. RBP, want to send me a set?
I’m curious because I didn’t see nor heard it discussed in the video but, the steps do retract when you open the rear doors? Im sure they do, just didn’t get a confirmation about it.
Is there a way to wire these WITHOUT the magnetic switches in the door jambs?? That's a DEAL BREAKER. I'd like them to deploy as soon as I hit the UNLOCK button - not upon opening the door. They look great otherwise - nearly invisible. NICE
2 questions1st what is the vertical drop from bottom of door to step when deployed2nd can the disable switch be used to lock the steps down for door ding protection in crowded parking lots
On the Rams like Ryan has, the vertical height difference between the bottom of the door and the edge of the power board is 12.6". And yes you can leave them down in a parking lot if you do choose. Thanks for your interest!
Wow this is awesome! I didn’t know RBP started making powered running boards. I was recently planning on getting AMP steps but after seeing how awesome these RBP boards are I’m definitely going to wait it out and get a set of these once they start making them for my truck!! By the looks it will absolutely be worth the wait😎 thanks for the video, trucks looking great man!
Awesome I’m really looking forward to getting a set! I’ll definitely have to go with extended drop that will be sooo sweet!! RBP, fantastic job you guys really stepped it up here!
the great thing is when you wait with product on back order. RBP says you only have been wait to 2 months before we discontinue the line. We have people waiting for 6 month we are cancel there orders Now that is customer service
While it’s good to have competition in the power running board world. I’ll still purchase the tried and true Amp Steps. Watching this video makes me think no big difference with function, finish, and install. Hopefully RBP will have better luck than the other power step company knockoffs (Bestops) that copied Amp Research.
Thanks for the feedback James, and for watching. Our power boards are completely different in design, function and manufacturing, so no "copying" others. So much so, that we were awarded 7 of our own patents. So thanks for the feedback, but your facts are a little off. Have a great day!
I just order mine from custom offset for 2016 ram 1500 on 35's with 6in lift. I ordered the 3in entended boards anyone know if that was right? No where does it recomend for lift size
RBP states as a NOTICE: Not for trucks with factory air ride. Why would it not be compatible? Especially if they work off the magnets in the door jam. Unless they are speaking to the 1500's and the front and back air ride. I could see that lowering too much for these power steps. Any ideas?
Do they tell you also what tools and sockets are needed? Also....you need some led lights from headlight revolution. Those factory ones are killing the leds💪
They tell you more than you need to know so you’ll have everything covered! You’ll have 0 problems doing this as a Saturday morning project and be done well before lunch!!
@@rollingbigpowertv I checked on your guys interwebs. Is the tundra crewmax same as double cab when comes to these power bars ? I have a 18 double cab and 6.5 bed. Didn't see a opt for it.
@@rollingbigpowertv crazy stoked thanks again for quick response !! If Ryan has it and diesel brothers as well has to stand up to abuse. And great rate . God bless you guys . Cant wait my wife said can't lift my truck without lift. So. Win win. 6in lift coming as well .
@@ryan2546 I'm looking at getting some. But with a 6" BDS I want a bigger drop then what my factory steps give. (For my short wife) so if they don't drop more then factory I'll be needing the drop brackets
Matt McQuigg they’re the same running boards and wiring with motor’s that drop 3” further! Honestly you’re probably the first guy I’ve seen comment who’s actually lifted their truck higher than the wife can get into 😂😂😂 most of them say I’m looking at the 4” zone/bds lift otherwise my wife can’t get in! At least you’re looking for a way to make her happy!
@@mattmcquigg5538 Look into AMP Research PowerXL's. Got them on my 2500 RAM MegaCab with a 6" BDS lift and they drop an addl 3". They don't tuck like the regular ones they look awesome plus protect your rockers/doors in parking lots. Plug n play install and LEDs already on the bars. Stupid heavy duty so it's a two person install
amp steps took me less than 2 hours a lot nicer than having wires in the door jam and no drilling in the floor boards just little hole for the led wires to go through pinch weld..and the mounting hardware is the same....not an rbp design
I know this an old video but in 5:10 you said that if something goes wrong, they RBP will ship overnight, I am having an issue with the install motor that does not work and I tried to contact the company. I sent several emails, made phone calls, included video, invoice and still no response. I contacted the vender and told them to put pressure on RBP to send me a new motor. They assured me that I can get a full refund. I will know more next week. As of December 10, 2022 and it's been 6 days since.
@@miked904 I got mine fixed with the help of Summit Racing. My steps were under a month old and 'Summit sent me another set. I sent the other set back. They are working good and I hope it will last me a long time.
@@miked904 I got mine fixed. I contacted Summit Racing, and they sent me another set of steps. I had to return the unused and defective parts back to them. I hope they get their act together. Sooner or later we all need replacement parts.
Just installed my RBP Stealth Running boards on my 2018 Ram 2500 CTD. It's a simple install. If you've ever taken apart the interior of a vehicle and wrenched on a motor not a big project. The wiring loom connectors were very well made and it was easy to work with. Plenty of zip ties for this project are included!
I took about 5 hours to install with the extra help from my 5 year old son in my garage. What I found to be the hardest part of the install was threading the motor mounting bolts into the back plate that sits inside the Ram frame. If you have the factory nuts inside the frame I'm sure it's much quicker. One simple change I'd make for the wiring is to have the passenger side magnet contact wire moved to the passenger side of the wiring loom. Drill through that floor and connect near the B pillar on that side. Currently, it goes through the driver side floor. Having it routed through the passenger side floor would prevent having to fish it under the seats and console inside the truck. I'd say it would be a cleaner install.
These steps have been sturdy and are very clean system. No adjustments needed and they work great. Happy I cancelled my AMP order and bought the RBP running boards. Oh and I don't have to buy a splitter for my OBDII port.
So glad to hear and thanks for the feedback!
What’s the weight capacity? I’m 6’2 and over 300lbs
@@roussellisking 600lbs
@@rollingbigpowertv 2021 power wagon can my husband get these for his truck he just got 75 anniversary power wagon
@@kristielee5797 I’m shopping for my 2016 but the americatrucks.com website lists them as 2010-2021. I’m confident the basic cab sheet metal has remained unchanged yet from 4th to 5th gen.
I'm glad someone is trying to compete with AMP! Maybe now they'll both have some discounts to help us out!
7:00 starts the installation
Thanks
@@michaelmarble2917 no problem
We keep our vehicles for 15-25 years. I drive 5-7K miles per year since I retired. My 23 Tacoma TRD Off Road, double Cab, w/ premium & technology pkgs with a 6' bed. I plan on keeping it until I am dead
I live in Hilliard Ohio and I’v seen the truck a few times.Just turned 18 3 weeks ago and just bought my first 4th gen Friday.Love the content!
This is my favorite RBP power running board video
😍😍😍 honored
So, what you’re saying is RBP sponsored this video.
I personally love my AMP boards on my ‘17 Ram, and I don’t have the magnets and exposed wiring in my door jambs.
I just put my amp streps on my 18’ 2500 and I also love them. Especially the obd plug and play to activate the doors. These RBP are sweet looking also but the attention to details with the wiring had me go with AMP.
Thats great! Thanks for the feedback!
@@Fireguy1962 Ryan shows our attention to detail on the wiring, product quality and ease of install. Glad you're happy with yours! 😊
Rolling Big Power He doesn't have them. He has the Amp Research steps because they pay more attention to the details.
Ok, maybe “attention to detail” were the wrong words to use for what I was referring to, but not having to add magnets and just having to “plug and play” with the amp steps makes it seem easier to install. But your steps look amazing and your video are very enjoyable to watch.
Ryan, glad you had a great experience with these boards. Mine was not so good... had to use the plates they provided and chase the threads on ALL of them, not to mention the 2 bolts that go through the pinch weld on all the motors, which I had to drill out because I had no holes. This should have been a 3 hour install like you said but the garbage I had to work with made it much more difficult than it had to be. The wiring was the least painful I have ever dealt with though which made it easy to button up. My wife has a JKU that I'll be putting these on...I sure hope they do a little quality control with their hardware like they have with their wiring harness!!! Thanks for the heads up on these boards though...they are nice when you wade through the b.s.!!!
Great Product just got mine today to bad its raining outside. I found time to install them when the rain stopped and I'll do the electrical tomorrow.lol
Can these fit a 2005 ram 2500 quad cab 4x4
I love the design of these steps on how thin they are. What I don't like is the extra wire for each door. More wire more problems uou think they would figure out how to plug into obd2 port.
Already getting hearts from the GOAT, greatest of all time
Those are pretty slick can't even see them there. I've saw some trucks with amp steps and you can tell they are there but not the case with RBP
😎😎 exactly all in the details
Just installed my RBP Stealth Running boards on my 2019 Ram 2500 yesterday. They look great but really wish @Rolling Big Power would have designed/planned these a bit better on the gas models. That front motor and assembly hits the frame mounted vibration dampening unit on both sides. Reality is if they would have just built it with the motor on the opposite side of the assembly it would have cleared. Other than that, install was fairly straight forward and the quality seems to be much better than AMP. Assemblies seem much more heavy duty.
Questions 1) What is the drop with those installed? I have a 6inch lift with 35s. Stock boards are just not cutting it.
Question 2) I’m worried about the wiring that could be kicked, or pinched. I have a kid and dog in and out all the time. Please let me know about and wear of tear on them.
Love this video, detailed man and solid. I’m in the market and seriously considering these now.
After watching this, I wish I would have bought these instead of the amp steps. The amps were such a pia to install. It required very precise alignment to prevent it from hitting the bottom of the cab. Not to mention, I paid 1300 shipped and it has one less motor than the RBP's.
How far down to the bottom of the step from your truck . I’m trying to figure out if I will be able to lift my leg that high to get up on my truck , I use a step ladder now
Like the bestop powerboard no inside wiring. Had them for awhile and no problems
Man, it does appear to be extremely easy to install in comparison others out there on the market! Great vid as always, bro!
RBP sponsored my SEMA jeep. Great company!
Love them 🙌🏼
How to install rolling big Power running board on a Jeep Wrangler
So how much of your new build is RBP paying for? after you kissed their ass so much in this video 😂
Craigon i would be kissing ass to if i had a channel and wanted free stuff.
Where do u go to get your stuff installed on the truck? Lift, running boards etc...
I need to get them for my 24 bighorn but can’t find them do they have a way to contact them
Getting that done for my dually soon, thanks for the video.
Do the lights come on when it’s not running?
The amp power steps seem to drop a little lower.
Great video been looking for an independent review and install thanks man.
i have 2021 power wagon 75 anniversy looking for them rbp running boards can i get these anywher
Hey Ryan, I realized this video is 2 years old. Is RBP planning to make a kit for the 2021-22 Ford Bronco? These seem to be a better value than the AMP ones.
Looks great. I like how they don't use the obd port(I don't want a splitter), but for the cost, I have to wait. I have other things that need to done before a new set of boards. RBP, want to send me a set?
Well thank you so much for the support. We hope to earn your business when you're ready!
I’m curious because I didn’t see nor heard it discussed in the video but, the steps do retract when you open the rear doors? Im sure they do, just didn’t get a confirmation about it.
Yes!!
RYAN MAYER do you by chance know why they aren’t compatible with the 05 superduties? Because the cab is the same from 99-16
Great question and yes they do!
@@tg_performance9205 We're working on those next! The cab is the same but sadly electrical isn't 😔
Where did you drill a hole and how big was it. You didn't show where the power hooked into either.
Is there a way to wire these WITHOUT the magnetic switches in the door jambs?? That's a DEAL BREAKER. I'd like them to deploy as soon as I hit the UNLOCK button - not upon opening the door. They look great otherwise - nearly invisible. NICE
My RBP steps just came in tonight, can’t wait to install them hopefully this weekend 🤞
Might be a stupid question but do both boards come down when only one side opens or just the side that opens? Beauty truck by the way
You should color match the lettering on the steps to the truck
I am NOT mechanically inclined at all, so who can I pay to install these on my 23 TRD Off Road double cab Tacoma in north central WA state?
Does RBP still make running boards?
2 questions1st what is the vertical drop from bottom of door to step when deployed2nd can the disable switch be used to lock the steps down for door ding protection in crowded parking lots
On the Rams like Ryan has, the vertical height difference between the bottom of the door and the edge of the power board is 12.6". And yes you can leave them down in a parking lot if you do choose. Thanks for your interest!
Green leds in the running board lights would look dope
Ok ok now we’re thinking outside the box 🧐
My question is the motor in cased or does it show like the AMP one plastic?
Are those holes already there on all the rams? or do we have to drill holes in the rams? thanks
How to Delete the Delay to close?
Dang, I’ve been waiting for this video forever
Tommy Midtlyng here it is!!
Were is the crome powered step bars with step lighting come on
13:44 Ryan sounds like you going to be sitting high as my semi truck 😄
I am don’t you worry 🤣🤣🤣
@@ryan2546 😄 🍻
So do they get as low as AMP? 6" on 37s wife has a hard time. Any help would be great.
Wow this is awesome! I didn’t know RBP started making powered running boards. I was recently planning on getting AMP steps but after seeing how awesome these RBP boards are I’m definitely going to wait it out and get a set of these once they start making them for my truck!! By the looks it will absolutely be worth the wait😎 thanks for the video, trucks looking great man!
Thanka for tuning in!
And depending on your trucks lift height extended drop steps coming soon too! 😎
Awesome I’m really looking forward to getting a set! I’ll definitely have to go with extended drop that will be sooo sweet!! RBP, fantastic job you guys really stepped it up here!
@@kcscustom9759 Thanks sir 😊
Rumor has it that Rough Country is OEM'ing RBP boards. Anyone know for sure. Looks almost the same in 2023!!
Do you know when they will be making extension for lifted trucks? I need one that drops down a little further. Thanks.
We are in production on them, they'll be out around summer!
Ur definitely gonna need to install either white or purple LED rock lights in the wheel wells
I may have them waiting to be installed 🤷🏼♂️😉
That's awesome that you can't see them, nice job. Where did you hook up the wires ?
Are these available in Canada?
I'm patiently waiting for the megacab specific ones! RBP told me they were being made!😍
They are!!!
THOSE ARE GOING TO LOOK AWESOME ON YOUR RIG
@@rollingbigpowertv any idea on expected release dates yet?
@@deathninja007 It will be summer time frame
How much is a set for a megacab? $
Rbp’ amp, or mopar????
Man Those boards are really nice 👍 and your truck is getting more and more badass...😬💪😈
the great thing is when you wait with product on back order. RBP says you only have been wait to 2 months before we discontinue the line. We have people waiting for 6 month we are cancel there orders Now that is customer service
While it’s good to have competition in the power running board world. I’ll still purchase the tried and true Amp Steps. Watching this video makes me think no big difference with function, finish, and install. Hopefully RBP will have better luck than the other power step company knockoffs (Bestops) that copied Amp Research.
Thanks for the feedback James, and for watching. Our power boards are completely different in design, function and manufacturing, so no "copying" others. So much so, that we were awarded 7 of our own patents. So thanks for the feedback, but your facts are a little off. Have a great day!
Are they Better then the AMP Research PowerStep?
I'll be taking my Iron cross my side side steps off, and installing these bad boiis!! Super Sick!
Thanks 😊
Word to I slept on rbp until now
I just order mine from custom offset for 2016 ram 1500 on 35's with 6in lift. I ordered the 3in entended boards anyone know if that was right? No where does it recomend for lift size
👍 👍 can they be left down in a parking lot to protect my doors from people parking to close ?door dings ..
John Kiser yep!!
Awesome video! I even loved the hills green tool box
You’ve come so far brother, you should be proud! Love the content and that sweet ass truck 👍🏻
RBP states as a NOTICE: Not for trucks with factory air ride. Why would it not be compatible? Especially if they work off the magnets in the door jam. Unless they are speaking to the 1500's and the front and back air ride. I could see that lowering too much for these power steps. Any ideas?
Thanks for the info
The lights help a lot
They really do!
Do they tell you also what tools and sockets are needed? Also....you need some led lights from headlight revolution. Those factory ones are killing the leds💪
Yes - the installation instructions list which tools are required for the install 😊
They tell you more than you need to know so you’ll have everything covered! You’ll have 0 problems doing this as a Saturday morning project and be done well before lunch!!
I'll definitely consider that if I get a ram 1500
Looks great, when are you installing the RBP taillights?
Do you the runningboards flex at all when you step on them?
Depends on where you step and how much weight you're putting on them. Ours are rated at 600 lbs per side
Do they flex when you step on them? Do you weigh much?
I’m 185lbs, Stay tuned for upcoming videos you’ll see how much they DONT flex 💯
Whats the weight limit?
They need to make them for 2nd gens!
We're working on it!
Rolling Big Power ooooooh 😍 don’t tempt me with more build ideas
Rolling Big Power cant wait 🤙🏻
Yes! 2nd gen please and thank you!
Sure would have liked more footage of the wiring harness installation.
Man, 600 Pounds ! That would hold my sister on her way home from Golden Coral !
Didn’t think the truck needed running boards but dangg😍😍
EXACTY! Hidden but they’re there!
@@ryan2546 yeah do you know if they have RBP running boards for 3rd gens?
I think it would look awesome if you painted your mirrors the same color purple as your lift
I thought about that 😂😂😂 would be one of the only people two toning with their mirrors that’s for sure
At 50 that was the first mod, priorities changed over time. Nice vid , always enjoy watching.
So glad I don’t have to jump anymore!! Haha
The side bolster of your front seat will appreciate it as well.
how are you Ryan? Love the vids and new more mods!! Keep up the great educational videos!
gavin cor wonderful how are you! Mods on deckkkk! About to get wildddd!
RYAN MAYER Are you doing LED lighting around the exterior getting rid of the halogen bulbs?
Omg that's sick its literally bolt on !!! Wow!!!
Yessir!
Yes 👏🏼👏🏼
@@rollingbigpowertv I checked on your guys interwebs. Is the tundra crewmax same as double cab when comes to these power bars ? I have a 18 double cab and 6.5 bed. Didn't see a opt for it.
@@deon865 The Double Cab is coming next - most likely summer release. We only cover the Crew Max currently. Sorry about that!
@@rollingbigpowertv crazy stoked thanks again for quick response !! If Ryan has it and diesel brothers as well has to stand up to abuse. And great rate . God bless you guys . Cant wait my wife said can't lift my truck without lift. So. Win win. 6in lift coming as well .
How this going to work on ur weather time ? It snows where I’m at right now too so
The sealed, IP68 rated motors work GREAT in the harshest of weather conditions.
#notificationsquad, can't wait for the end result
So you have to add door sensors..hmmmmmmmm the competition does that part better using the vehicle OBD 2.
I definitely want some but it might be a bit of a waste of money on a 08 F150
Colby 0101 they don’t make them for a ford 150 at all !! F250 and up only
They need to make some for 1998 gmc Sierra z71
Good stuff Ryan ! they look great !!!
Thank you!!!
Looks awesome!
Nice install man💯💯
Thanks my guy!!!!!
@@ryan2546 you're welcome!! I love your channel!!
Cummins Power appreciate the support!!
What grill is that
Custom RBP grille
looks like someone from RBP helped him installing this, also how much did rbp pay you
Not a thing 😁
Better than AMP Research?
Motor for the board sounds loud, or is it just me?
Must just be the video. We're actually several db less than others
When u going to get leds
Lane Frazier SOON
RYAN MAYER but a lot cleaner look and make that color pop at night
Cant wait
You need LED’s for your truck headlights. Your truck would look so much nicer even thought it already is amazing
I wish they made them for my Nissan frontier pro-4x 😭
12 is a steal are you kidding me !! Bargain !!
I feel like they don't drop as far down as they should. They look like they come out more then down.
They drop down enough for entering and existing the truck. The extended drop will add an extra 3" drop as well!
At 6.5” (big truck in person) this is perfect for a step up and in all in one motion 😎
@@ryan2546 I'm looking at getting some. But with a 6" BDS I want a bigger drop then what my factory steps give. (For my short wife) so if they don't drop more then factory I'll be needing the drop brackets
Matt McQuigg they’re the same running boards and wiring with motor’s that drop 3” further! Honestly you’re probably the first guy I’ve seen comment who’s actually lifted their truck higher than the wife can get into 😂😂😂 most of them say I’m looking at the 4” zone/bds lift otherwise my wife can’t get in! At least you’re looking for a way to make her happy!
@@mattmcquigg5538 Look into AMP Research PowerXL's. Got them on my 2500 RAM MegaCab with a 6" BDS lift and they drop an addl 3". They don't tuck like the regular ones they look awesome plus protect your rockers/doors in parking lots. Plug n play install and LEDs already on the bars. Stupid heavy duty so it's a two person install
amp steps took me less than 2 hours a lot nicer than having wires in the door jam and no drilling in the floor boards just little hole for the led wires to go through pinch weld..and the mounting hardware is the same....not an rbp design
Hole was made into a plastic grommet 👍🏼
@@ryan2546 it is what it is...
I know this an old video but in 5:10 you said that if something goes wrong, they RBP will ship overnight, I am having an issue with the install motor that does not work and I tried to contact the company. I sent several emails, made phone calls, included video, invoice and still no response. I contacted the vender and told them to put pressure on RBP to send me a new motor. They assured me that I can get a full refund. I will know more next week. As of December 10, 2022 and it's been 6 days since.
Any update? I am having issues with my steps not fully deploying. I tried calling but no answer and tried e-mailing and messaging with no luck.
@@miked904 I got mine fixed with the help of Summit Racing. My steps were under a month old and 'Summit sent me another set. I sent the other set back. They are working good and I hope it will last me a long time.
@@miked904 I got mine fixed. I contacted Summit Racing, and they sent me another set of steps. I had to return the unused and defective parts back to them. I hope they get their act together. Sooner or later we all need replacement parts.
I replied twice to you and seems to my post was deleted. @@miked904