Heads up, if you route the wire harness through the cross member before passing through the floor grommets with white / brown wires, it keeps everything out of the way and not hanging down.
would have been nice to see the process to install the shims for final alignment as the instructions did not have any info. guess it is self explanatory?
All the videos I see have the motors delivered in the “open” position and allows the boards to be installed before the wiring. Mine came with the motors in the “closed or retracted” position. So I’m assuming I need to toggle the switch to the “off” position and have the doors closed then give them power and then open all doors and then turn the switch on so all the motors open at the same time and then be able to install the boards? Or is there an override feature to manually open them? Also, I either lost 2 magnets or they were packed when shipped but the motors will activate with the on/off switch but I can get any of the trigger sensors to make the motors do anything. Do all 4 magnets need to be installed and all doors shut in order for one door to be opened and closed at a time to activate the motors??? Wondering if all the magnets complete a circuit somehow and that’s why I can’t test with just one magnet and any sensor?
@@Maugwa yes I did. Two magnets were missing and Rough Country expedited spares to me and now all is fine and working well. What I hadn’t realized is that all 4 magnets and sensors must be installed and all doors have to be closed in order for the circuit to be broken and activate the motors. I love them and should’ve pulled the trigger sooner!
Shop These Rough Country Power Running Boards!
www.americantrucks.com/rough-country-f150-power-running-boards-psr71520.html
Heads up, if you route the wire harness through the cross member before passing through the floor grommets with white / brown wires, it keeps everything out of the way and not hanging down.
Thanks for the video. Helped a lot.
would have been nice to see the process to install the shims for final alignment as the instructions did not have any info. guess it is self explanatory?
All the videos I see have the motors delivered in the “open” position and allows the boards to be installed before the wiring. Mine came with the motors in the “closed or retracted” position. So I’m assuming I need to toggle the switch to the “off” position and have the doors closed then give them power and then open all doors and then turn the switch on so all the motors open at the same time and then be able to install the boards? Or is there an override feature to manually open them? Also, I either lost 2 magnets or they were packed when shipped but the motors will activate with the on/off switch but I can get any of the trigger sensors to make the motors do anything. Do all 4 magnets need to be installed and all doors shut in order for one door to be opened and closed at a time to activate the motors??? Wondering if all the magnets complete a circuit somehow and that’s why I can’t test with just one magnet and any sensor?
You get em figured out Dave?
@@Maugwa yes I did. Two magnets were missing and Rough Country expedited spares to me and now all is fine and working well. What I hadn’t realized is that all 4 magnets and sensors must be installed and all doors have to be closed in order for the circuit to be broken and activate the motors. I love them and should’ve pulled the trigger sooner!
@@superdave074mine came in the closed position as well, so you just have to do everything first before installing the board?
Would it not have been better to put boards on last?
$1100 at Rough Country