I can't speak for the relic hunters out there but I can say that the deus 1 v.5.2 with the X35 coils are 'coin and jewelry' perfection! I have the 9, 11, and elliptical coil that covers all scenarios and ground conditions. I use 17, 25, and 31k with various versions of hot and 4 tone fast platforms that take me and my machine to a whole new level. So a big shout-out to Deus and Gary Blackwell for giving all of us techno-nerds and detectorist many years of quality enjoyment and higher detecting skills.
As soon as I got my Deus 1 I subscribed to this channel, I am still learning about the Deus I (bought it in 2014) and I have watched all Gary's videos, but I'm finding that I am slowly revisiting them because it is easy to become a little complacent with the programs, watching the videos again gives me a fresh look at the machine and I'm finding that my 'finds' have improved. Thanks Gary
Had a go with the Hot 2 program and got a signal in very very hard ground , no signal with the normal hot program . Dug down about 150 mm and uncovered a brass buckle , also got a coin about 100 mm which was picked up by both hot programs . Looking forward going over old ground to see what might be deeper. Thanks again for the advice and Hot 2 program. @@The-skillschool
Nice one Gary, thanks for the video. On my quiet-ish fields I usually go with -4.5 on discrimination which knocks out most of the ground noise. Good to see all those Romans flying out of the ground! 👍🏻
Awesome video as always Gary. Thanks for the settings mate, definitely going to give it a try, haven’t used my deus 1 for months, thanks Gary for sharing.
Thank you Gary, your programs are wonderful. I used the sonar program, I’ll try hot 2 tomorrow. Today I found several coins from 1815 and 1800 with a sonar program on very metal-contaminated soil. Deus 1 is a super device.
Happy new year Gary!I wish you all good in new 2024.After 2 years whithout deus 1 im in again 😂 I like so much this machine im very happy when i search whith deus 1️⃣
Great video Gary. I love my Deus I. I have not been able to afford to upgrade to a Deus II yet. My question is I see that they have bone induction headphones for the Deus II, do they have plans of making them to fit the Deus I, and the Orx? I hunt in the mountains here a lot and we have a lot of rattlesnakes so I don't like to use headphones there, but the bone induction headphones seem like they may be perfect for those places. Also, my tinnitus is very extreme now and I think it is too much wearing the backphones? Thank you for your professional videos and advise.
Thanks for your question, I don't think they will for the D1 and ORX. Some years ago I tried some Bluetooth sports B/C headphones with a 3.5mm dongle and they worked well on the D1.
Settings @ 9:00 ... Thanks a lot Gary! I'll be out with my old D1 pretty soon, (and that's my coil too!! 🤩) - I've tried 'Hot over Deep' before, but pretty sure you have some extra little nuances here, eg. the Fq. and Descr. - Anyways, can't wait to try this one mate, and thanks 🙏 as ever for the great videos!... Bobby 🐭
Thank you for your dedication to this great hobby and insights.. I have the original coil that came with deus 1 ...is it worth picking up any of the hf coils?
Hey,Gary! I have watched your new video for d1 with hot program settings,what's the difference between this one and hot program with almost same settings? Which one is better?Cheers and greeting from Bulgaria!
Short question... Can i Put the Sens to high to serch for hammered silver, Cut half and Cut quarters? In my mind i was thinking smaller coins Higher Sens... But when i saw an video about an other detektor my thaugts where changing... In this video(yes it was en air Test OK) the other detektor was Put to max Sens and a Cut half between two nails (Tip to the coin,heads away from it) and the detektor only was gettin between the nails as the User dropped the Sens in the upper 2/3 of the Sens. (My detektor deus1, 9 Inch x35 coil) i would do the Test on my own but i dont have an Cut half to Test it
I love the deus 1, still learning and the finds just keep going up, still waiting for you Gary to decide which trowel you would like me to send you over
@@The-skillschool no worries, il have to come on one of the digs you guys go one, me my brother and both our wife’s love the digs and would love to come along
Hi Gary, i noticed that you mentioned the ground there was troublesome,would ground balancing of helped in quieting the machine? I know a lot of times you use 88 for nonmineralized soil.I understand the logic in raising disc to 3 silencing small iron.Maybe you did GB the machine but didn't show it.Thanks for taking the time to make these videos and provide tech support to deus users.
Thanks for your thoughts, ground balancing on our damp soil makes the machine over sensitive. But I hear what you are saying, perhaps it's worth ground balancing and lowering the sensitivity.
Thanks for the feedback ,we have a place here in Culpepper Virginia where targets are deep and in mineralized soil.I may try your deep program variation with set g.b. or Goldfield mode which i like.A lot of users are using expensive pulse machines for this particular soil,i don't hunt there enough to purchase an expensive pulse machine.
Gary, It may just be me, but I still can’t match the depth of my xp Deus 1 with the 3.2 software in good ground. I attempted to film a deep civil war bullet trying to hold a phone in one hand then finish digging with the other. I see people digging holes at pinpointer depth saying how deep they are. I filmed a measured 16-17” deep bullet that was so deep, I thought it was a Belt buckle in a trench bottom. So far, I can’t get within 3-5 inches on my Deus 2 of my first Deus 1 and 3.2. I still have 2 of coils, need to find a cheap Deus one, set up 3.2 and try it again. The Deus one handled EMI Sooo much better as well. Thanks for all you do.
Just a thought Weiss - you could try the 'closest ' equivalent to this, which is: Copy the Tones from Sensi FT and put them over Deep HC. Pretty sure I've tried this, but tbh. I mostly use a 'Maxed Out' version of Relic these days anyway... 😉🙏🏻
Hi Gary, Would you recommend these settings on the deus lite? and also are these settings ideal for ground that’s not producing much in way of targets.
@@The-skillschool my only issue is I’m not very familiar with the deus lite set up is there anyway you can do a video showing these settings on the ws4 headphones please Gary
Just as mine settings,Gary.The only different thing is that i prefer ( -2 ) discrimination and my land allows 86-87 ground balance.Perfect settings,love hot ot deep program.Chears , Gary and take care ❤🍀
Hi Gary (and thank you so much for you instructions) do you have secret setting for the Deus II? Thank you for your time and trouble, I’m a very green beginner!
Хобби
You have a great way of relaying information, thank you.
Thanks Gary
He's helped me out greatly.
Thanks John
I can't speak for the relic hunters out there but I can say that the deus 1 v.5.2 with the X35 coils are 'coin and jewelry' perfection! I have the 9, 11, and elliptical coil that covers all scenarios and ground conditions. I use 17, 25, and 31k with various versions of hot and 4 tone fast platforms that take me and my machine to a whole new level. So a big shout-out to Deus and Gary Blackwell for giving all of us techno-nerds and detectorist many years of quality enjoyment and higher detecting skills.
Thanks for your thoughts Andrew and your continued support 🤝
D1 will always be legendary to me, nice to see it in your hands again Gary.
Thank you my friend, it's always a pleasure to use the D1.
As soon as I got my Deus 1 I subscribed to this channel, I am still learning about the Deus I (bought it in 2014) and I have watched all Gary's videos, but I'm finding that I am slowly revisiting them because it is easy to become a little complacent with the programs, watching the videos again gives me a fresh look at the machine and I'm finding that my 'finds' have improved. Thanks Gary
Thanks for your support, please share my videos whenever you can, it really helps the channel.
Will be giving this a go Tomorrow in North East Victoria Australia , Thanks Gary
Good luck, keep us posted 👍
Had a go with the Hot 2 program and got a signal in very very hard ground , no signal with the normal hot program . Dug down about 150 mm and uncovered a brass buckle , also got a coin about 100 mm which was picked up by both hot programs . Looking forward going over old ground to see what might be deeper. Thanks again for the advice and Hot 2 program. @@The-skillschool
I LOVE your example fields lol! Amazing Finds. So glad you did a xp deus video again! Thank you for the settings!
You are welcome sir 🤝
@metal_detecting lol you should probably check my pic. Definitely not a sir. Lol! I dig everyday tho! Probably more than most men. 😁
@@AncientAdventuresMy bad 😁
Nice one Gary, thanks for the video. On my quiet-ish fields I usually go with -4.5 on discrimination which knocks out most of the ground noise. Good to see all those Romans flying out of the ground! 👍🏻
Awesome video as always Gary. Thanks for the settings mate, definitely going to give it a try, haven’t used my deus 1 for months, thanks Gary for sharing.
Best of luck Steve 👍
Excellent searching mate. Nice to see the D1 out n about on these fields. Great explanation of your settings 👌
Thanks Paul 🤝👍
Thank you Gary, your programs are wonderful. I used the sonar program, I’ll try hot 2 tomorrow. Today I found several coins from 1815 and 1800 with a sonar program on very metal-contaminated soil. Deus 1 is a super device.
Thanks Greyone good luck with the new settings
Thanks Gary, will be giving this a try this weekend 👍🏻👊🏻
Hope you enjoy
good as always ,and thank you for showing the XY screen more as thinking of getting the Deus 2 soon health means i have to be picky with what i dig
Thanks Tom
Best tones ever made on a detector💥
Happy new year Gary!I wish you all good in new 2024.After 2 years whithout deus 1 im in again 😂 I like so much this machine im very happy when i search whith deus 1️⃣
Happy new year, good to hear from you my friend 🤝
Great video Gary. I love my Deus I. I have not been able to afford to upgrade to a Deus II yet. My question is I see that they have bone induction headphones for the Deus II, do they have plans of making them to fit the Deus I, and the Orx? I hunt in the mountains here a lot and we have a lot of rattlesnakes so I don't like to use headphones there, but the bone induction headphones seem like they may be perfect for those places. Also, my tinnitus is very extreme now and I think it is too much wearing the backphones? Thank you for your professional videos and advise.
Thanks for your question, I don't think they will for the D1 and ORX.
Some years ago I tried some Bluetooth sports B/C headphones with a 3.5mm dongle and they worked well on the D1.
Thank you Gary. I will look into getting a setup like you mentioned.+@@The-skillschool
Never give up on the d one, it keeps on giving 💯 😊
Agreed RT Nails 🤝
Hello Gary,
I really liked this video.
I'm going to try it on the Deus II hoping it gives the same result.
Thank you for sharing.
Hope you have a good day Louis 🤝
Thanks Gary
Great video Gary.
Thanks TH 🤝
Settings @ 9:00 ... Thanks a lot Gary! I'll be out with my old D1 pretty soon, (and that's my coil too!! 🤩) - I've tried 'Hot over Deep' before, but pretty sure you have some extra little nuances here, eg. the Fq. and Descr. - Anyways, can't wait to try this one mate, and thanks 🙏 as ever for the great videos!... Bobby 🐭
Thanks Bobby, wishing you the best of luck
@@The-skillschool Tnx Sensei!... 🙏🏻
Thank you for your dedication to this great hobby and insights..
I have the original coil that came with deus 1 ...is it worth picking up any of the hf coils?
Personally I think the round HF coil is the best.
@@The-skillschool Thank ya .. is that the hf 9.5" round hf coil?
@hobonickel840 yes
Hey,Gary! I have watched your new video for d1 with hot program settings,what's the difference between this one and hot program with almost same settings? Which one is better?Cheers and greeting from Bulgaria!
Check the video with your machine settings.
I have the old 28 coil works thath of the secret program.gread video garry
Sure just use 17Khz
Short question... Can i Put the Sens to high to serch for hammered silver, Cut half and Cut quarters? In my mind i was thinking smaller coins Higher Sens... But when i saw an video about an other detektor my thaugts where changing... In this video(yes it was en air Test OK) the other detektor was Put to max Sens and a Cut half between two nails (Tip to the coin,heads away from it) and the detektor only was gettin between the nails as the User dropped the Sens in the upper 2/3 of the Sens. (My detektor deus1, 9 Inch x35 coil) i would do the Test on my own but i dont have an Cut half to Test it
The sensitivity does not relate to the coins.
It should be set as high as possible, what number depends on soil what the conditions will allow.
I love the deus 1, still learning and the finds just keep going up, still waiting for you Gary to decide which trowel you would like me to send you over
Thanks Richard, will be in touch.
@@The-skillschool no worries, il have to come on one of the digs you guys go one, me my brother and both our wife’s love the digs and would love to come along
Hi Gary, i noticed that you mentioned the ground there was troublesome,would ground balancing of helped in quieting the machine? I know a lot of times you use 88 for nonmineralized soil.I understand the logic in raising disc to 3 silencing small iron.Maybe you did GB the machine but didn't show it.Thanks for taking the time to make these videos and provide tech support to deus users.
Thanks for your thoughts, ground balancing on our damp soil makes the machine over sensitive.
But I hear what you are saying, perhaps it's worth ground balancing and lowering the sensitivity.
Thanks for the feedback ,we have a place here in Culpepper Virginia where targets are deep and in mineralized soil.I may try your deep program variation with set g.b. or Goldfield mode which i like.A lot of users are using expensive pulse machines for this particular soil,i don't hunt there enough to purchase an expensive pulse machine.
Goldfield is a good choice
Gary, It may just be me, but I still can’t match the depth of my xp Deus 1 with the 3.2 software in good ground. I attempted to film a deep civil war bullet trying to hold a phone in one hand then finish digging with the other. I see people digging holes at pinpointer depth saying how deep they are. I filmed a measured 16-17” deep bullet that was so deep, I thought it was a Belt buckle in a trench bottom. So far, I can’t get within 3-5 inches on my Deus 2 of my first Deus 1 and 3.2. I still have 2 of coils, need to find a cheap Deus one, set up 3.2 and try it again. The Deus one handled EMI Sooo much better as well. Thanks for all you do.
Great info Jerry, I have no doubt in my mind the Deus 2 has more depth capabilities.
But if you prefer the D1, it's all good.👍
Great vid Gary ... could you do a similar program on the deus 2 ?
It wouldn't be the same in FMF, perhaps it will be better.
I will give it a try.
Too good gary, thank you. Can we do this program with the deus 2 in multi frequency?
I think it will be different
Just a thought Weiss - you could try the 'closest ' equivalent to this, which is: Copy the Tones from Sensi FT and put them over Deep HC. Pretty sure I've tried this, but tbh. I mostly use a 'Maxed Out' version of Relic these days anyway... 😉🙏🏻
Hi Gary,
Would you recommend these settings on the deus lite? and also are these settings ideal for ground that’s not producing much in way of targets.
Hi Michael give it a try and let me know.
@@The-skillschool also I’ll be using x35 coil
I've set this on the deus lite, works very well, only difference for the x35 was putting the frequency on 18khz
That's fine, thanks for the heads up 👍
@@The-skillschool my only issue is I’m not very familiar with the deus lite set up is there anyway you can do a video showing these settings on the ws4 headphones please Gary
I’m getting a Deus 1 pretty soon, should I get the remote, or ok with just the headset??
Remote with WS Audio headphones and 22cm HF coil would be my personal choice.
can you use this on the x35 coil if you can what frequency would you run gary
X35....no problem, I would run the maximum around 25Khz 👍
I’ve just bought a Deus lite and just wanted to know if I need to ground balance?
Not normally in the UK
Deus 11all the way young man from raining Cornwall 😅
Still raining Tim, thats bad news we have Blue skies here
Can your program be replicated on the deus lite Gary? Atb.
Yes you can use the same settings.
Mh MI6 keeps falling off. Any suggestions"
Funnily enough, that is the exact same settings I use most of the time, except if the ground is quiet with little iron I put the reactivity on 2.5
Thanks for your thoughts 👍
Just as mine settings,Gary.The only different thing is that i prefer ( -2 ) discrimination and my land allows 86-87 ground balance.Perfect settings,love hot ot deep program.Chears , Gary and take care ❤🍀
Great feedback, thanks for sharing.
Deus1 Best...
Thanks
The hf coils are the secret weapons of the deus one series, the deus two is a great machine but can't go where they can YET😮😊😊
HF coils were a game changer.
89 Likes bro 👊👍
Thanks for the visit
Hello
i live in germany and my english is not very good and you speak fast can you write these installations ?
Hi Gary (and thank you so much for you instructions) do you have secret setting for the Deus II?
Thank you for your time and trouble, I’m a very green beginner!
Thanks Robert, try the Nero program on the D2