One thing missing in this video: if when you first open your Rode Wireless Pro, if the TXs and RX are below 15% charge, Rode Connect will not update the firmware. So you have to wait until they are charged a bit.
Thank you so much. The DJI mics were better than the Wireless Go 2s. But I think Rode did a great job matching features and adding some quality of life features to this generation.
Can I record audio into the 2 transmitters as well as into my camera? When I hit record on the 2 transmitters, the camera is not capturing the audio. Please advise. GREAT VIDEO!
Yes you can record files locally on the transmitters while still sending the signal to the receiver/camera. I do this so I have backups in case anything goes wrong. Hope this helps!
That's strange. I never seen a camera like that, but if that's the case then you cannot monitor without the headphone jack available. Usually a seperate mic jack is used for the receiver.
@@Smoucki1 in the rode central app once all the devices are connected. Select the Transmitter icon, and you should see an option for settings (it’s a gear/wheel icon), click that and the settings will appear for gain assist and record. Cheers
Great video Bruno! Was very helpful. Keep it up and I have no doubt you'll grow fast!
Thank you for the kind words.
Great video, very informative. Great editing too!
Thanks Shari!
Thanks I just got these
This video was made just for you brotha
I have this thing called "learning how to use new devices one night before the action" :D Your video was exactly what I needed, thank you so much!
Lol Im glad I could help save the day. Good luck on your shoot.
Here for the same reason haha
@@Flowmotions-xyz lmao
LOL I do this too hahah , I also used to study for exams the night before in high school , guess its just more exciting this way
Saaaaaame lol
Thanks for this quick guide, Bruno. Very helpful!
Glad I could help!
Thank you! Just got these yesterday and I'm excited to get them going! Great video!
Thank you, glad I could help!
Insightful video! Thanks for the lesson.
You're welcome! Glad I could help.
Thank you bruno! This vid helped me out tremendously for my future projects.
That’s the goal! I’m glad I could help :)
Excellent tutorial. Thank you.
Glad I could help!
That was perfect mate, great tutorial thanks ❤
Glad I could help, cheers!
One thing missing in this video: if when you first open your Rode Wireless Pro, if the TXs and RX are below 15% charge, Rode Connect will not update the firmware. So you have to wait until they are charged a bit.
Oh I didn’t even know, thank you for sharing the tip!
@@BrunoPozo4Real 💪😊🙏
Thank you ☺️
You’re very welcome :)
great video Bruno! I have the DJI wireless, sometimes I think I should have purchased Rodes. Great video and editing!
Thank you so much. The DJI mics were better than the Wireless Go 2s. But I think Rode did a great job matching features and adding some quality of life features to this generation.
@@BrunoPozo4Real would you know why, when i connect my DJIs to my camera, there is a high pitch hum?
@@weddingproceo No clue, never used the DJI Mics or heard of that issue, I'm sorry.
Cheers mate, thanks!
Glad I could help
Can I record audio into the 2 transmitters as well as into my camera? When I hit record on the 2 transmitters, the camera is not capturing the audio. Please advise. GREAT VIDEO!
Yes you can record files locally on the transmitters while still sending the signal to the receiver/camera. I do this so I have backups in case anything goes wrong.
Hope this helps!
Perfect 🎯
I gotchu
Is lowering the audio level on the camera settings absolutely necessary? I’ve had it at 12 since I got my camera 5 years ago
Not necessary, but it will provide a slightly cleaner audio signal since the camera’s preamps aren’t very good.
@@BrunoPozo4Real I see ok will do it then. Thank you for the quick and to the point content!
@@777ElZorro that’s my goal, straight to the point. Cheers!
How can I monitor my audio if the receiver occupies my camera's headphone jack?
That's strange. I never seen a camera like that, but if that's the case then you cannot monitor without the headphone jack available. Usually a seperate mic jack is used for the receiver.
The software is different now, there is no Gain Assist and no REC, I have version 2.0.45
Found it they just moved it to a different spot in the software your video was very helpful!
@@StevesRealReviews sweet! Im glad you found it, cheers!
Hello, I can't find it. Can you indicate me where it is please ? I also have 2.0.45
@@Smoucki1 in the rode central app once all the devices are connected. Select the Transmitter icon, and you should see an option for settings (it’s a gear/wheel icon), click that and the settings will appear for gain assist and record.
Cheers
Hi bro
Howdy