Biggest tip I've got for the stomp is changing your input impedance to 1ohm for full frequency if you want that. Or change it to match the amp model's original impedance for more realism. Really helps on bass and baritone. It also changes how the amps and effects react.
I've had a Stomp for about 2 years now, got it used for a steal. I've gigged with it and recorded with it until I got the Axe-FX III. I've commented a few times on various videos that I think it's the best guitar purchase I've ever made in terms of value. Plenty of gear has come and gone in that time and this has stayed rooted firmly to my fly board. It sounds great, it's really easy to use and Line 6 are still updating it all the time. There are limitations of course but that just forces you to be extra creative.
Amazing vid Leon! Last night I worked with Micheal Schenker Group and their other guitarist was using nothing but a single HX Stomp and that was it. Sounded mega and definitely kept up with the 2 full stacks Schenker had
Excellent sounds. I've gone back and forth with HX amp modeling for years but as a utility/fx box; the Stomp is really the ultimate. Such a great little pedal that is jam packed with functionality.
That was a thoroughly enjoyable tour through many HX Stomp Effects as seen through your experienced background and skilled hands. I hope you do more videos like this, particularly on the Amps & Cabs, for the following reasons. I've had an HX Stomp for about 1.7 years. Until recently, I hadn't known/appreciated that many real "Guitar Cab Speakers," including Classics like the Celestion, have shocking steep high frequency cutoffs around 4-5kHz! The Celestion G12M Greenback has a Frequency Range Spec of 75Hz - 5,000kHz (based on the Chart at Celestion), and a steep High Cut dropping the volume from about 107dB down to about 77dB in a steep line slope in the range from around 3.5kHz to 7kHz. I'm not sure if I calculated this right, but I think that is a 30dB decrease in one octave! The Stomp Cabs have a high cut "default setting" at 8kHz. Depending on your use: Live, Studio, Headphone, etc. those settings could be good or bad. In general, I find the stock Presets to be way too bright, and are "out of spec" for most real Cabs. I think this may be the source of many complaints of the Line 6 Helix Modelers sounded harsh, thin, lacking feel, etc. Lowering the High Cut is a good way to remedy that. Knowing this information has made it a lot easier for me to dial in Presets appropriately so they sound good through Monitoring Headphones, and feel, sound, and perform more like a real Amp.
Very nice to see Line 6 getting some love. As a Helix user, I was really interested to see your take on some of the effects. Hope you plan to do more. Thanks.
Oddly, I was just checking this out yesterday online. You know reading spec's and such, and low and behold here you do a video on it! Sounds pretty killer man...
You know, I think we really do live in an amazing time. I’m about to release my first record with my (for now) solo project I’ve been working on for a while now, Blackened Death Metal project, and I did everything on my laptop all the guitar tracks recorded directly with my Helix (and Eventide H9 for some external effects, I’m in love with the Undulator effect, I use it on almost all my clean tones) Guitars are just the Revv Generator model Red Channel with the Horizon Drive into an IR. Wether you play Axe-Fx, Helix, Kemper, Neural, these things make life so much easier to get easy access to great tones. 👌
That was fun. I've been using an HX Effects for several months now, 4CM with a Catalyst 100 for mostly clean, ambient, new wave, jazz, funk. Recently put the HX Effects in front of my Marshall 50 W full stack and it works great. Besides the "wild and crazy" effects which I don't use often, the HX Effects has just about everything I want and need in a compact package. I use MIDI to control the Catalyst, for boost on/off and setting the amp model for the preset. The combination of HX Effects and Catalyst 100 is very versatile, though I don't like the crunch tones (I use my Marshalls) or the modern high gain tones (I use my Engl), and would need to spend more time dialing those in. In the Catalyst I use Clean, Boutique and Chime. Cheers!
HX Stomp seems like an incredible unit. In the mini modeler world I think the Boss GT-1000 Core wins if you’re looking for an all in one solution, but as a multi fx with an amp or something to complete a pedalboard, the HX Stomp just has so many advantages no other mini modeler can touch. And balanced outputs!!!
There is an extensive thread on TGP called "replicating-my-favorite-pedals-with-helix-hx" which contains tons of inspiring settings of various effects. That alone would give enough content for another vid like this. Must-try-tip: HALO Delay settings for the Crisscross Delay (#216).
Nice video Leon. You went through a lot. All of it are the same reason I really have come to love my HX Effects. Line 6 does some excellent effects. And going into my Mark V, I just get some amazing tone. I really favor processors for effects these days being able set presets using particular effects and then the saved screenshots in them switching and off effects in one button hit. I used pedal for years, but am not a pedal guy. You've got all those great amps behind you. I would love using an HX Effects into then and having all my presets I custom set for each amp at call.
My fave mod effect in the unit is the retro reel. I love it post the amp for a lofi, warbly tape sound. Reminds me of the tone on some of the true detective season 1 soundtrack
I’d really like to see you set this up with presets, your own and ones yours setup for yourself for live. I find that once you add an IR, amp, and reverb there isn’t much cpu power left
Hey Leon, I am a helix user and I was wondering if you had a chance to use the York ir Marshall M30 with the helix if so what are your thoughts, better marshall sound than the MArshall M25?
I really like some of the Delays in the Helix stuff…The Vintage Digital is one of my favorites…The Trinity Chorus is nice too…I agree on the pitch detune..Not my favorite..it always sounded phasey to me…Still,there are some great FX in this little box..
sounds a bit harsh to me,. I'd like to hear your creation of a clean; crunch; gain; lead as you might for a gigging as well as atmospheres from the fx as you are famed for.
Try to get your hands on a J. Rocket Allan Holdsworth Overdrive and Boost. Seems to be a awesome pedal, Tube Screamer on steroids:)... if you haven't already reviewed that one:)
Great video Leon. My POD Go sounds just like this and I love it. Can't wait to hear what you can do using the amp and cab models and how you think it compares to the FM3. I think most of the Line 6 products punch way above their price class. God bless and rock on 🎸👍😎
China controls the chip industry and right now there so much in the air with consistency of getting them. I see many of these companies streamlining their products soon.
@@TVoltG This is the problem with letting a foreign country like "Chyna" control anything. People are greedy and corrupt, and this is what happens. It's stupid.
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
Biggest tip I've got for the stomp is changing your input impedance to 1ohm for full frequency if you want that. Or change it to match the amp model's original impedance for more realism. Really helps on bass and baritone. It also changes how the amps and effects react.
That is really overlooked on all systems this one, the fractals, even the Avid 11 rack.
Oh my…….had no idea. Doing that immediately. Thanks!!!!!!
I've had a Stomp for about 2 years now, got it used for a steal. I've gigged with it and recorded with it until I got the Axe-FX III. I've commented a few times on various videos that I think it's the best guitar purchase I've ever made in terms of value. Plenty of gear has come and gone in that time and this has stayed rooted firmly to my fly board. It sounds great, it's really easy to use and Line 6 are still updating it all the time. There are limitations of course but that just forces you to be extra creative.
Amazing vid Leon! Last night I worked with Micheal Schenker Group and their other guitarist was using nothing but a single HX Stomp and that was it. Sounded mega and definitely kept up with the 2 full stacks Schenker had
That's pretty amazing!
Excellent sounds. I've gone back and forth with HX amp modeling for years but as a utility/fx box; the Stomp is really the ultimate. Such a great little pedal that is jam packed with functionality.
Stupor OD is my favorite drive in the Helix for the "tube screamer" trick to clean up driven amps. The clarity it adds is just SO good.
That was a thoroughly enjoyable tour through many HX Stomp Effects as seen through your experienced background and skilled hands. I hope you do more videos like this, particularly on the Amps & Cabs, for the following reasons.
I've had an HX Stomp for about 1.7 years. Until recently, I hadn't known/appreciated that many real "Guitar Cab Speakers," including Classics like the Celestion, have shocking steep high frequency cutoffs around 4-5kHz! The Celestion G12M Greenback has a Frequency Range Spec of 75Hz - 5,000kHz (based on the Chart at Celestion), and a steep High Cut dropping the volume from about 107dB down to about 77dB in a steep line slope in the range from around 3.5kHz to 7kHz. I'm not sure if I calculated this right, but I think that is a 30dB decrease in one octave!
The Stomp Cabs have a high cut "default setting" at 8kHz. Depending on your use: Live, Studio, Headphone, etc. those settings could be good or bad. In general, I find the stock Presets to be way too bright, and are "out of spec" for most real Cabs. I think this may be the source of many complaints of the Line 6 Helix Modelers sounded harsh, thin, lacking feel, etc. Lowering the High Cut is a good way to remedy that. Knowing this information has made it a lot easier for me to dial in Presets appropriately so they sound good through Monitoring Headphones, and feel, sound, and perform more like a real Amp.
mindblowing tones
Very nice to see Line 6 getting some love. As a Helix user, I was really interested to see your take on some of the effects. Hope you plan to do more. Thanks.
It's great watching you dig into the HX Stomp, helps give my ideas for my Helix.
Oddly, I was just checking this out yesterday online. You know reading spec's and such, and low and behold here you do a video on it!
Sounds pretty killer man...
make sure when you try the amps you check out the Placater (Friedman BE) Its stunning. Even Dave has said its scarily accurate.
You know, I think we really do live in an amazing time. I’m about to release my first record with my (for now) solo project I’ve been working on for a while now, Blackened Death Metal project, and I did everything on my laptop all the guitar tracks recorded directly with my Helix (and Eventide H9 for some external effects, I’m in love with the Undulator effect, I use it on almost all my clean tones) Guitars are just the Revv Generator model Red Channel with the Horizon Drive into an IR. Wether you play Axe-Fx, Helix, Kemper, Neural, these things make life so much easier to get easy access to great tones. 👌
Sounds almost aquatic @13:00 amazing!
That was fun.
I've been using an HX Effects for several months now, 4CM with a Catalyst 100 for mostly clean, ambient, new wave, jazz, funk. Recently put the HX Effects in front of my Marshall 50 W full stack and it works great.
Besides the "wild and crazy" effects which I don't use often, the HX Effects has just about everything I want and need in a compact package. I use MIDI to control the Catalyst, for boost on/off and setting the amp model for the preset.
The combination of HX Effects and Catalyst 100 is very versatile, though I don't like the crunch tones (I use my Marshalls) or the modern high gain tones (I use my Engl), and would need to spend more time dialing those in. In the Catalyst I use Clean, Boutique and Chime.
Cheers!
Really want to hear the amp modeling! Nice tone on that chorus….
The "Microshift" setting just screams Van Halen 3 and I bloody love it! Thanks for the vid mate
it does!
HX Stomp seems like an incredible unit. In the mini modeler world I think the Boss GT-1000 Core wins if you’re looking for an all in one solution, but as a multi fx with an amp or something to complete a pedalboard, the HX Stomp just has so many advantages no other mini modeler can touch. And balanced outputs!!!
There is an extensive thread on TGP called "replicating-my-favorite-pedals-with-helix-hx" which contains tons of inspiring settings of various effects. That alone would give enough content for another vid like this.
Must-try-tip: HALO Delay settings for the Crisscross Delay (#216).
dat autofocus tho. I could never get Line6 amp modelling but these effects hold their own, that's a pleasant surprise
Nice video Leon. You went through a lot. All of it are the same reason I really have come to love my HX Effects. Line 6 does some excellent effects. And going into my Mark V, I just get some amazing tone. I really favor processors for effects these days being able set presets using particular effects and then the saved screenshots in them switching and off effects in one button hit. I used pedal for years, but am not a pedal guy. You've got all those great amps behind you. I would love using an HX Effects into then and having all my presets I custom set for each amp at call.
Great unit awesome playing and tones
My fave mod effect in the unit is the retro reel. I love it post the amp for a lofi, warbly tape sound. Reminds me of the tone on some of the true detective season 1 soundtrack
I’d really like to see you set this up with presets, your own and ones yours setup for yourself for live. I find that once you add an IR, amp, and reverb there isn’t much cpu power left
Hey Leon, I am a helix user and I was wondering if you had a chance to use the York ir Marshall M30 with the helix if so what are your thoughts, better marshall sound than the MArshall M25?
I was in doubt between the HX Stomp and the Fractal FM3, but based on your vids, it seems the FM3 sounds much better
Nice to see you trying the HX! Would love to collaborate on a video on modelers! I also use an FM9 😉😊. Thanks for all the great content
I will second that suggestion!
Keen!
I would like to get one of these one day. they sound pretty darn good.
Zzsounds bro 83 bucks a month no credit
Leon,
I'm sure you know, but I saw on the Mod effects, you had it at the midpoint. The spread parameter will widen the effect greatly.
Noted! Looking forward to trying that.
I really like some of the Delays in the Helix stuff…The Vintage Digital is one of my favorites…The Trinity Chorus is nice too…I agree on the pitch detune..Not my favorite..it always sounded phasey to me…Still,there are some great FX in this little box..
Hi, What amp sound were you using in this video, the overdriven sounds at around 20:29? Are the snap shots available? :) Thanks
probably the Axe-Fx Boogie Mark IV model
The main question is how does HX Stomp compare overall to the new Universal Audio amp in a box pedals like Dream, 65, Ruby, Woodro w???
John Cordy just did a video on this
Looking for a floor unit to use with my Triaxis for switching and effects, was considering something like this
sounds a bit harsh to me,. I'd like to hear your creation of a clean; crunch; gain; lead as you might for a gigging as well as atmospheres from the fx as you are famed for.
Try to get your hands on a J. Rocket Allan Holdsworth Overdrive and Boost. Seems to be a awesome pedal, Tube Screamer on steroids:)... if you haven't already reviewed that one:)
Great video Leon. My POD Go sounds just like this and I love it. Can't wait to hear what you can do using the amp and cab models and how you think it compares to the FM3. I think most of the Line 6 products punch way above their price class. God bless and rock on 🎸👍😎
Elephant man and dual delay.....happy
Once you go Eventide H9 (or two) + Strymon's of choice then you'll never look back...imho.
Great video 🙂
Good morning leon
People have been talking about a "Helix 2" coming out. Is Line6 really working on it, or is it just a myth? 🤔
China controls the chip industry and right now there so much in the air with consistency of getting them. I see many of these companies streamlining their products soon.
@@TVoltG This is the problem with letting a foreign country like "Chyna" control anything. People are greedy and corrupt, and this is what happens. It's stupid.
Effects are great on these units.. amp Sims just don't work to me
Wolldecke Love Go See a Video about the Amp Models and Howe you Wolldecke dial it in
Hey mate, have you done a video on the Line 6 Pod Go ? Cheers from Radelaide .
Awesome. Would like one of these