5 General Tips/Tricks for Line 6 HX Stomp (for ANY genre)
HTML-код
- Опубликовано: 29 июн 2024
- In this video, I go over 5 general tips & tricks for the Line 6 HX Stomp. These are general tips that apply to any genre or setting in your HX Stomp. Some of these are tips to save space (since you only get 6 blocks), and some of them are more about shaping your tone. I use these in almost all of these tips in every setting/preset I use in my HX Stomp.
👇👇👇 FOLLOW ME ON INSTAGRAM👇👇👇
✨ / scottuhlmusic
🤘🤘🤘 BOOK A CONSULTATION 🤘🤘🤘
🌐 www.scottuhlmusic.com/consulting
🎸🎸🎸 MY ORIGINAL MUSIC/PROJECT "SPIRAL CELL" 🎸🎸🎸
🎵 / spiralcell
🔥🔥🔥 DEALS & DISCOUNTS 🔥🔥🔥
💥 Best Deals on Sweetwater:
👉 sweetwater.sjv.io/XYZyyy
💥 5% OFF Phenyx Pro products (use promo SCOTTUHLMUSIC):
👉 phenyxpro.com/?ref=zo7epbiric 👈
🤗🤗🤗 SUPPORT THE CHANNEL: 🤗🤗🤗
☕ Buy Me A Coffee: www.buymeacoffee.com/scottuhl...
💸 Send a Tip: www.scottuhlmusic.com/tips
0:00 - Intro
0:34 - Input Gate
1:32 - Solo Boost Without Using a Block
2:52 - Low/High Cut for Better Tone
6:20 - Small External Switches
9:24 - Changing the Cabs
🔥 PURCHASE LINKS FOR HELIX AND HX FAMILY 🔥
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
◆ Helix (Floor):
🔵 Sweetwater: sweetwater.sjv.io/MmXEZN
📦 Amazon: amzn.to/3aYtM1t
🌍 Thomann: thmn.to/thoprod/366537?offid=...
◆ Helix LT:
🔵 Sweetwater: sweetwater.sjv.io/q4no1O
📦 Amazon: amzn.to/2RsjpLE
🌍 Thomann: thmn.to/thoprod/410901?offid=...
◆ Helix (Rack):
🔵 Sweetwater: sweetwater.sjv.io/rQnWVB
🌍 Thomann: thmn.to/thoprod/366540?offid=...
◆ HX Stomp XL:
🔵 Sweetwater: sweetwater.sjv.io/LXPEJ3
📦 Amazon: amzn.to/3wTbx7G
🌍 Thomann: thmn.to/thoprod/515225?offid=...
◆ HX Stomp:
🔵 Sweetwater: sweetwater.sjv.io/xk9oB3
📦 Amazon: amzn.to/2y1XWCs
🌍 Thomann: thmn.to/thoprod/450218?offid=...
◆ LINE 6 HX Effects:
🔵 Sweetwater: sweetwater.sjv.io/9gWqNY
📦 Amazon: amzn.to/2IWCTqO
🌍 Thomann: thmn.to/thoprod/431840?offid=...
+ GEAR MENTIONED IN THIS VIDEO +
-------------------------------------------------------------
◆ LINE 6 - HX STOMP ◆
amzn.to/2y1XWCs
◆ MISSION ENGINEERING - TT2 FOOTSWITCH ◆
amzn.to/3oWeHUT
◆ MXL - M199 TAP TEMPO ◆
Tiny Footswitch (single)
amzn.to/33xObrB
◆ MOSKY - 2 BUTTON FOOTSWITCH ◆
amzn.to/2RwVv1e
◆ MC 6 MKII ◆
6 Button MIDI Controller for HX Stomp
www.morningstarfx.com/mc6-mkii
◆ TRS CABLE ◆
amzn.to/3ht6Fyw
◆ MYVOLTS - RIPCORD ◆
Power Devices with USB
amzn.to/3cdOv2V
◆ MYVOLTS - RIPCORD TIPSET◆
7 Pack DC Tip Adaptors For Ripcord
amzn.to/3b684J6
🎸 MY LIVE RIG 🎸
●▬▬▬▬▬▬▬▬▬▬▬●
◆ Electric Guitar 1 ◆ amzn.to/3c7WywC
◆ Electric Guitar 2 ◆ amzn.to/2y8iTLN
◆ Midi Guitar Pickup ◆ amzn.to/2VjzNyW
◆ Acoustic Guitar ◆ 1 www.fullcontacthardware.com/sp...
◆ Acoustic Guitar 2 ◆ amzn.to/3aYrdfT
◆ Amp Modeler ◆ amzn.to/3aYtM1t
◆ Amp Modeler for smaller gigs ◆ amzn.to/2y1XWCs
◆ Wireless #1 ◆ amzn.to/2x8rlLd
◆ Wireless #2 ◆ amzn.to/3aW6jhi
◆ Wireless for smaller gigs ◆ amzn.to/34nzOGi
◆ In-Ear Monitor System ◆ amzn.to/34pT7ih
◆ Earbuds ◆ amzn.to/2xagKPU
◆ Guitar Case ◆ amzn.to/2yaIUtV
◆ Mic Stand ◆ amzn.to/34wddYb
◆ iPad ◆ amzn.to/36KERBM
◆ iPAD Mic Stand Clip◆ amzn.to/2ww5InJ
◆ Cable ◆ amzn.to/2Aj1KQC
🔊My Live Sound Gear 🔊
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
◆ Mixer ◆ amzn.to/2yJpahl
◆ PA Speakers ◆ amzn.to/2y7LbGg
🎥 VIDEO SETUP FOR RUclips VIDEOS 🎥
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
◆ NIKON CAMERA ◆ amzn.to/2zY1hnh
◆ NIKON LENS ◆ amzn.to/2U812wJ
◆ GOPRO - HERO 8 BLACK ◆ amzn.to/2Bsq9E1
◆ iPHONE 11 PRO MAX ◆ amzn.to/2z0s9CJ
◆ MOMENT iPHONE LENS ◆ amzn.to/2Az9Uof
◆ TRIPOD ◆ amzn.to/3eK0kO8
◆ TRIPOD ◆ amzn.to/3dv2RvB
◆ LIGHTS ◆ amzn.to/3eQ7zEr
◆ RING LIGHT ◆ amzn.to/3nmkHX5
*All links are Amazon Affiliate links
--------------------------------
+ OTHER VIDEOS +
--------------------------------
Power Your Gear (including HX Stomp) with USB:
• Power Your Gear with U...
Understanding Snapshots:
• Snapshot Mode for Heli...
-------------------------------------------
+ HIRE ME TO HELP YOU +
-------------------------------------------
Having trouble setting up your MIDI routing, in ear monitors, wireless, backing tracks, lighting, video, or just want to know what would be the best gear option for you to get? Message me what you are trying to accomplish and I can help you. More info on my website at:
www.scottuhlmusic.com/consulting 
Видеоклипы
Hey everyone, the new HX firmware update gets your HX Stomp 8 blocks now! Highly worth updating to firmware 3.0 for that alone, along with all of the new amps/pedals. I just made a video about how to update your firmware on the HX Stomp/Helix units, and I also made a video on using my favorite mode: the Snapshot Mode. Check out those videos here:
Upgrade Firmware: ruclips.net/video/5r198X4-fBU/видео.html
Snapshot Mode: ruclips.net/video/DG6CwBM9gzk/видео.html
FYI - Line 6 has sent out a notice via email that audio output is corrupted on firmware 3.0, and to immediately update to 3.1 to fix the problem.
Bro. Thanks for the video. Could you please make a vide for the HX stomp XL. It's a bit more complicated than the stomp.
If I had an XL I definitely would. Possibly in the future 👍
@@ScottUhlMusic I have it and I'm having a hard time punching buttons and learning all the ins and outs lol.
instablaster...
Just want to say a big thank you Scott for this playlist of HX Stomp tips! They have been invaluable in the help they have given me over the last few days as I learn to use my new Stomp. Well explained with a great splattering of humour. Nice one 😎🙏🏼🎸
Thank you 😊 Come for the tech, stay for the gifs!
Very cool tutorial! Nice work!
Thanks for the video...very helpful!
Really a great little “to the point” video and helpful to us all of us Stompers.
Thank you 😊
Omg today I spent hours deciding which processor to buy coz I couldn't sort my Stomp out. After watching this I've got exactly the sounds I want! Thank you so much!!!!!
Awesome! Glad to help! :)
Great tips, thank you! Just got my HX last week. Didn´t know about input gate. Nice one!
Awesome, enjoy the new HX Stomp. It’s my go-to live rig for almost all of my shows
Thank you. Your videos are very helpful and informative.
Thanks John 🤘
Scott...you are so correct about the cabs affecting the tone...people are always taking about changing pickups etc...and when I mention speaker cabs they give me the stink eye!!...great stuff my man!!!
Yeah, the cabs really are a massive way to dial in your tone for sure!
Thank you again!
Amazing versatility...love mine
Great suggestions! Thanks!
🤘🤘
Awesome tips and tricks bro. The latest 3.11 update takes the HX to the next level. Rock on !!! THANKS AGAIN!!
Yeah, it’s definitely worth the upgrade!
Thanks, this is super helpful as I just got mine a couple weeks ago. I’ll check out the firmware update process as well. I like the tip about the input noise gate to save a block, and I was just trying to get more volume for recording yesterday so the output boost is also relevant. Cheers
Thanks! Glad you found the video helpful
Thank you very much Scott! So helpful..!! :)
You're very welcome!
Nice job! Thanks for the tips!!! 👦🏻
awesome video!
Thanks!
Loved your video.. thanks for the explaining ❤ peace✌
Thanks!
Thank you!
🤘🤘
Thanks great video
Thanks 🤘
Great video.
Thanks 🤘
Hello,Scot!!! Thank you so much for very clear and important information about the setups. I would like to kindly ask you about making a few tutorial video-lessons about how to create that wonderful sound like you have ( clear, rock lead solo and crunchy) in one preset. I have watched 10000 lessons ,but no one of them haven't explain such a clearly and professionaly on the way like You do it. All you videos are just the BEST easy to understand and just a pleasure to listen your voice (very beautiful color of voice) .blessings ! And thank you in advance!
Thanks! I’ve gotten asked on how to setup some of my patches and/or to sell them a couple of times now. I’ll have to get around to doing that at some point. Thanks for commenting, and glad you’ve found the videos helpful!
Great tips. I’m trying to learn the HX Stomp, and your videos are great!
Thanks! Glad you are finding them helpful
Can you set your external foot switch to be a boost on all presets (globally), or do you have to do it patch by patch? I was trying to follow how you did that. I thought it only applied to one preset.
Yup check out my video here: ruclips.net/video/wnDd25v7498/видео.html
Thanks!
🤘🤘
Super!
🤘🤘
you must be an excellent guitar player because I don't know ANY band who would ask the guitar player to boost the solo more than he (the guitar player) thinks is ok ;) thanks for the excellent tips/tricks!!!
Hahahaha it is a very rare thing for sure! Haha
I'll use snapshots to both change mics, and mic distance too. Sometimes just boosting for a lead sounds a little too harsh and in your face, so I might back the distance up an inch or two, and occasionally will even change from a dynamic to a ribbon etc.
Hey Scott thanks for your great tutorial videos.. can you tell me how to change the metronome from the HX Stomp itself??
Thanks! And what do you mean the metronome? What metronome are you using?
Thanks for the review of these options! Is there any way to get your All-in-one preset?
Yup, I’m working on doing a pack now :) should be up on my website within the next week or so. I will let you know, thanks!
Great video. I don’t know if you have done this already or not, but could you demo how you set up your “All in One” preset with the three snapshots? New HX Stomp user here. Thank you.
Thanks! I’ve been debating about doing a “store” or something with my patches because multiple people have asked. Since I haven’t done it yet, send me a message on the form on my website and I can send you the snapshot 👍
Hi! First of all: great video, thanks.
Second, I have a question: How many options of external switches have the Stomp? I mean: Can I assign, for example, 4 external switches to the Stomp (to have, in total, 7 switches to use)? Or it just support 2 external switches?
If you are coming out of the EXP, then yeah you only get 2 external foot switches. However, using the MIDI in/out you can get more with things like the Morning Star MC6. You can get 6 extra pedals with that.
Thanks for your awesome work! 😁🤘
Could you please create a high gain patch from scratch with the 3.0 firmware version and show how limited/not limited it is?
I’m working on a video demoing my patches right now. Planning to release it ASAP, and I will for sure have a metal tone in it. But I can guarantee the hx stomp can produce some great metal tones 🤘
@@ScottUhlMusic Perfect, thanks!
Great videos! (but here's a tip for you, leave the camera on manual focus please!)
Yeah, this video was many years ago, and I figured that out on my RUclips journey haha.
Nice video! What power cable is that?
MyVolts ripcord. I did a video on it here: ruclips.net/video/-RbykZwyzMY/видео.html
Great video! The only downside to using TRS and those extra switches is that you lose your expression pedal (assuming you are using both switches).
I think there are MIDI foot switches you can get that will do the same thing but free up your expression pedal input.
Yup, you are correct. There are many many options out there. Since you can get two expression inputs in the one slot, I’ve used an expression pedal and a tap tempo before. I just found this setup more useful for me. But especially with being able to use the midi ports, there are a lot of options to expand on the Hx stomp. It’s a very well designed pedal!
@@ScottUhlMusic Yeah this thing is a Swiss Army Knife of pedals if I've ever seen one. I actually haven't purchased one yet, I'm GASing hard though and I've put one in my Amazon cart and removed it twice now. As awesome as it is, I don't know how much use I would get out of it as a bass player, though I do know they support bass and have plenty to offer, it's just that I typically run pretty clean, but man it looks like so much fun to play with! I'm kinda itching for one because they have some really nice DI models in there like Darkglass and SansAmp, plus plenty more to play with.
SansAmp is great for bass as well. But I do find myself almost always using the HX Stomp even over my full helix. It’s just so convenient. If I need multiple effects, I control it with midi messages from Ableton to load different patches. But using snapshot mode I usually am fine for my main 3 tones and a boost for 95% of the songs I play. It’s really valuable. I actually use it as my only pedal many times. It’s pretty sweet.
Thanks for the video sir , im wondering if i attached the external footswitch , can i use 4 set of snapshot ? It seems stomp only have 3 snapshot in the preset , thanks
Yeah I wish I could get snapshot 4 & 5 with an external foot switch, but as of right now you only get 3 snapshots in the stomp. Hopefully someday!
Power bank is a great and cheap solution! How much mAh do you suggest me? How many time I can play with a power bank? Thanks for your video!
This is the one that I use personally: amzn.to/3eLp7SP and I get about 4 hours out of it. But it just barely makes it to 4 hours haha. They do make ones that last longer as well. But this one has served me well.
Scott, great video. Do you think HX can handle these three type of patches and also an acoustic simulator? Or is there not enough processing power? That’s the solve I’m trying to sort.
Thanks!
Scott
Where is the acoustic simulator? If it’s an external pedal, it should effect the HX stomp at all. HX stomp will run out of DSP if you overload it with pedals. Especially the new ones like the poly shift pedal. But any external ones you should be good
@@ScottUhlMusic the new 3.01 software update has acoustic simulator in the EQ section ... it sounded good in some demos I heard ... curious as to its dsp requirements ....
Oh that’s right it does have that! I forgot. I haven’t messed with it, so I don’t know how dsp intensive it is...
Tiny beast of a machine, innit?! I can see why so many people swear by them.
It really is. I thought I would just use it for mostly fly gigs (you know... before Covid), but I find that I use this about 90-95% of the gigs I play. It’s pretty amazing.
greetings, the control of two commands the small one that connects in the exp as it is called? Where can I buy it and get it?
It’s the TT2 by mission engineering and you can get it here: amzn.to/3oWeHUT
Hey Scott I just subscribe to your channel, I want to know how to setup the mission pedal on volume and wah with just one amp, i do it but using in snapshot one amp for to patches and another amp for the wah. Thank you.
Thanks for subscribing! I would watch my video on snapshot mode here: ruclips.net/video/DG6CwBM9gzk/видео.html 👍
Scott is it possible (with the dual external footswitch) to add a 4th snapshot, and have the 5th, to scroll presets?
No, you only get 3 snapshots by default with the stomp. Hopefully someday!
Thank you Scott.
Really interesting video. I am currently playing with a similar two button extension foot switch but I can't decide which way to set it up. I am alternating between using it for patch up/down or for FS function which allows me to change between screens. It involves a lot of tap dancing but in the FS function mode I can change the screen to allow patch up/down with FS1 and 2 and then once I have selected the patch I want I can flip the screen to show snapshots. I know it would be easier with a midi controller but this was a LOT cheaper. The problem is that I can't settle on a set up. It almost like there are too many options!
Have you tried other options such as these with FS4 and 5?
For my setup, I just find it easiest to be in snapshot mode, so 1 is a clean sound, 2 is a little more grit, and 3 is distortion. Then f4 is for a boost/solo (on any of the snapshots) and F5 is my tap tempo and tuner. That seems to be the best bang for the buck for only having 5 buttons IMO.
Question about the rip cord, the wall charger is rated at 3A and the rip cable is 1A so was just curious if this poses a potential power issue? I don’t think the HX uses all 3A but is 1A enough?
I address the amp requirements in the ripcord video: ruclips.net/video/-RbykZwyzMY/видео.html
Hi Scott how did you set up the switch as a tap tempo?
It’s under global settings 👍
What brick is safe to use with the ripcord for powering the stomp
I go over that in the step up video; ruclips.net/video/ROadxSiSpBQ/видео.htmlsi=XLuDrvrCkLcYvCKZ
Hallo brother.. HX stomp with external overdrive pedal sound will be better than internal HX stomp overdrive?
Not necessarily. It’s all about personal taste. If you like your specific external overdrive pedal, the Helix family works well with other pedals. If you like the OD in the Helix, then use that. It’s all about personal taste.
What frequency cuts would you recommend for bass? Most cabs don't even produce below 45 hz and above 4 - 5 kHz. Do you recommend starting there?
I would say start at 60hz and use your ear to clear out the mud. It really depends the sound you are going for, but don’t be afraid to scoop out a decent amount for more clarity. Trust your ears
The small external switches how much ? where can you get and buy?
That is the TT2 by Mission Engineering, and you can buy it here: amzn.to/3oWeHUT
How can you make a momentary switch function as a latch type? I'm having a difficult time getting my tap tempo switch to be able to turn on and off the output boost..
When you program it using “learn” you should be able to set it to momentary or latching. That’s likely the problem
Hi since firmware 3.1 update , HX stomp now have 8 blocks , are they really all usable with DSP limitations ? Also is Extra 2 switches sufficient or should I invest on 3 or more ?
Yup, you can definitely use all of the blocks (DSP limited), so it's up to you. I find 5 footswiches is great for me and all I need. But if you need more than that, go for it. It just depends on your setup.
Yup!, I run it on power bank too!
Nice, do you use the MyVolts Ripcord as well?
No actually I use a USB 5 to 9 converter got from Amazon that has 1A out but I had to cute the tip and soldier 2.5 by 5.5 power cord tip to make it work and swap the polarity
It works with only 1A?
@@ScottUhlMusic I mean the max out is 1A that was the highest I found on USB converters. The one you have also shows 1A out
This is the one I have.
www.amazon.com/dp/B074R7FDCR/ref=cm_sw_r_sms_apa_i_Qs65FbWSJHWED?_encoding=UTF8&psc=1
Really useful video - thanks!
What's that USB cable you're using there? Can you post a link to that?
Yup, it's the Ripcord by Myvolts, and you can watch my video on that here: ruclips.net/video/-RbykZwyzMY/видео.html
Nice video, can I ask what power supply you’re using?
Should have waited until the end of the video 😅
Hahaha I was about to tell you that :) you can check out my other video on the Ripcord by MyVolts to know more
@@ScottUhlMusic I literally posted the comment 10 seconds before you said it as well! Thanks, will check it out. I’m sure I’ve looked at them before due to bulky power supplies not fitting under my pedal board. Don’t have an HX Stomp yet but one thing that concerned me was the bulky power supply so it’s great to see that they work.
is the use of a single external switch possible (just for tap tempo and tuner) ?thx
Yup 👍
@@ScottUhlMusic thx I connected it
Hey Scott Could you tell me what FS4 and 5 do while in snapshot mode?
F4 and F5 are whatever pedal you assign them to while in snapshot mode. So the main 3 switches are snapshots and F4 and F5 are whatever you assign them to. For me, I have them assigned to boost (on the output) for F4 and tap tempo/tuner for F5
@@ScottUhlMusic nice didn't know if that stayed under assignment while changing to snapshot ? Thanks
When I try to assign one of my effects to FS4 it won’t work. Anything I’m missing ??
I would have to see your chain and settings. Is the external pedal plugged in correctly?
Yeah I’ve been using it to get Preset up and down for months.
Trying to assign foot switch 4 like you do in this video. Did everything you did and it’s not working. Go back to using it as preset up and down and it works fine so it’s not the switch
@@tommyburnhamsmusic Are you using "Bypass Assign" instead of "Controller assign"? So in my example when I wanted to change my boost level, I used Controller Assign. But when I wanted to turn on and off my Delay, I used Bypass Assign.
Can you copy a snapshot to a different Preset? Seems like that should be something easy to do....
I don’t believe so, unless you copied the entire preset over which would copy the snapshot
Neat box good video but it better have the best manual ever -
I feel like the helix units are actually some of THE easiest to understand pedals as far as amp modelers and fx processors go. With anything there is a learning curve, but HX stomp and helix are actually really easy to program imo
My hx stomp just always get freezing and no sound when I play one to two hours outdoor, why does it happen?😭😭😭😭
I power it up with dc7 and I put IR to use it
Is it overheating? With how insanely hot it’s been lately, that’s always a possibility
hi, so if i want to connect an external wah pedal to the hx stomp, i just run it through the send return (fx loop) ?
Yup that’s correct. Or you can put it before or after the HX stomp if you don’t want to take up an extra block in the stomp (even though it has 8 blocks now, which is better than 6). That will give you a different tone since it puts it only at the beginning or only the end of the chain, but you might like that sound who knows. But the best way would be send and return IMO.
@@ScottUhlMusic thanks for the reply! so with the 8 block update now I can run up to 8 blocks but how about the DSP ? is there any limitation when running a full 8 blocks preset ?
The DSP did not expand on the HX stomp. You can still easily get to 8 blocks if you don’t use super high DSP hogging blocks. So a send and return will basically be nothing on dsp
@@ScottUhlMusic i see, one more thing, how can i hook up like a backing track to this unit ? i dont see a dedicated aux input ?
I’m assuming you mean plug in backing tracks and play along with the stomp and listen? I don’t think you can. Sorry :/
Hey man, Im looking to start using Snapshot mode, But I need to keep the tap tempo available for my delays. Would any Tap Tempo switch work with the Stomp? I Saw that you mentioned the MXR Tap. Just wondering if I could use any other as well?
One of my next videos I was working on was about snapshot mode, so be sure to watch for that. Basically any tap tempo should work for the stomp. The MXR Tao is perfect because of how small it is. The TT2 is really nice because you get a 2nd button and it barely takes up any extra room.
My snapshot mode video is now up 👍
Is that a skin on your Stomp or a special edition?
I’m pretty sure this is the normal one?
Is this better than the boss gt 1000 core?
I haven’t used it personally. I absolutely love my helix and hx stomp, but I personally do not get into the “processor/modeler wars.” I recommend hx stomp to people who ask, but I’ve heard great tones out of other modelers as well.
@@ScottUhlMusic thanks... I love the sound of this but the boss has more blocks for effects, torn between these two haha
For sure. It comes down to what you need personally. The HX stomp 3.0 update allows 8 blocks now just FYI. I never find myself needing more than 8, and if I do I can alway create another patch.
@@ScottUhlMusic I think you just helped me make the decision 😆
Hahaha well glad to help 🤘
very very complicated !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Any piece of gear is “complicated” if you don’t spend the time to get to know it 🤷