Honda CBR 600 F2 Carburetor Removal Pt.3 (Final Part)
HTML-код
- Опубликовано: 26 апр 2023
- Hey everyone, here is the last part of the three part series on the carburetor removal for the Honda CBR600F2. We replace the o-rings, reassemble, and reinstall the carbs in this one!
Pt.1: • Honda CBR 600 F2 Carbu...
Pt.2: • Honda CBR 600 F2 Carbu...
Thanks for watching and subscribe if you like the content :) - Авто/Мото
Great video, the day I got my license I noticed alot of fuel leaking from nr.1 carburetor. In the progress of removing them now.
Engaging with your content! 🤣
Cracking 💪
Did you put new gaskets in between the air cleaner and top of the carbs? I just re-jetted the carbs, but cannot find a gasket that will fit. They are all too big. Tryed freezer trick, grease trick, tryed a heat gun to see if the rubber would shrivle up, nothing works. If you got any tips or a know good gasket kit please share, id much aprreciate it.
Love the video, any chance of one how to replace all parts in the carb with a replacement set?
I probably have some clogged needles and am going to attempt to replace them myself, am.i correct in assuming I can do so without having to pull the entire carb out?
Any tips would be much appreciated ❤❤❤
Yo thanks for the comment! Maybe in a future video I can show how to replace all the jets and boats... If you are doing a full replacement, you may want to take the carbs out so you can properly clean/replace the jets. If you put new ones in and they get clogged then you'd have to do it all over again :( The carbs have a few tiny parts to it as well, so getting to the jets while it's still on the bike might be tricky! Also it'd be a good idea to replace the gaskets in there while you have the chance!
What are the o ring sizes you used for the t valves that were leaking
I used the 10x2mm or 025/64"x05/64" if you're an inches kinda guy. Thanks for the comment!
@@G9Strider thx bro, ur a real one :)