Electrolux Washing Machine EWW7524ADWA Drying Fault Fix

Quick tutorial on how to fix an Electrolux Washer Dryer Washing Machine that is not drying properly. Applies to model EWW7524ADWA and many more Electrolux Washer Dryer Washing Machine.

[@user-ne5be9ur4t]

somehow karma was at work today when my wife found your video - we were ripped off 2 days ago by an emergency locksmith - but today we fixed the problem cos of your excellent and generous sharing of your knowledge!! thanks so much! (btw. our model was an Electrolux EWW12753 7.5kg Washer 4.5kg Dryer Combo)

[@damianmoran1423]

Thanks Mr Washy Washy, this fixed my problem. I have an Electrolux Ultimate Care 800 wash & dry model that has already required fixing once by a technician. The technician used crimp sleeves to rejoin the wires, and zip-tied the wire to the original anchor point (it failed again after a dozen wash cycles). I tried a crimp sleeve but the wires are a little too thin for a good join, I recommend soldering as Mr Washy Washy does. And definitely attach the wires to main loom and not the dryer manifold, that manifold shakes a lot!

[@karl889]

Thank you so much!!! Im pretty certain the wires broke on the first cycle. The dryer never worked properly! You're a legend mate.

[@cristincs4835]

You were spot-on the problem! In my case The cables were clean cut. The manufacturer added some extra Orange tape to fix The issue, but clearly wasn't enough. It's a pitty that Electrolux knew about the problem but didn't bother to fix it. My washer broke 2 months after The warranty expire. Thank you a lot! Keep up The good work!

[@JayNawaz]

Thank you. Exactly the problem with my EWW14013.

[@olliefs9298]

Hello Mr washy washy! I have this model Electrolux washer/dryer.. I seem to have two problems.. I have heat on the dryer assembly but I believe the fan is busted.. secondly when washing on hot wash it doesn't seem to be heating up.. so possibly the water heat element.. both pretty straightforward.. anything I can do to confirm before I buy the parts I need?

[@chatriesukcha4280]

Hi. Mine is not drying. There's heat, tested drain pipe & its working fine. Blow fan working fine. But when drying clothes, theres no water collected & the clothes are still damp, only a lil bit warm. Still cant find out whats wrong

[@huanfriend8857]

great video

[@haxate]

Thanks! Had this exact problem and now it's fixed.

[@scott.parker]

Thank you for your video, I looked at the wires in mine and after taking the tape off, they were cut clean through. However, I dropped the end of the wires and now am not sure which wire went to which plug on the barrel. I don't see any markings to indicate anything like positive/negative, does it matter which wire goes on which end?

[@vicmahomet1046]

Your video was brilliant just fixed my electolux eww1696swd just a you described thanks

[@BacsPet96]

Thanks for the straightforward video!

[@paulsmyth9163]

thanks mate. fixed ours in 5 minutes

[@bohman86]

The sensor the cabel is going to can you control some how

[@meaninglessfilms]

Hi Mr Washy Washy, thank you for great instructional video. I have the same exact model and is too having issues with clothes drying. The clothes come out extremely damp. The heater does heart up. At some point in the drying cycle. I can see water being introduced into the drum. I wonder you have any suggestions of what the problem is? Thank you

[@robrossi6035]

I found a cut (not fully through) in that same wire. Had a go at fixing it, but still seems like there is no heat whatsoever. Any other suggestions? I tested all those other sensors and they seemed OK (though first time using a multi meter haha)

[@trishbutler2011]

I've got the same washing machine, however we have no power going to it at all. Is there a way to fix this asap as my washing pile is getting bigger

[@BrunoFerreira-sf6gr]

Hello BRASIL...😁👍🙋‍♂️🇧🇷

[@cristianabrantes9190]

if that small fan on the top is hardly to rotate meaning there is a problem with the blower?