Thanks I am trying to open the condenser on my AEG 7000 combi which looks very similar but there are many bolts and I am a bit wary of digging too deep in the machine...
Hi,I have exactly the same problem with my Miele Wash and Dry,planning top open the top and get the condeser cleaned,any links on how to do this step by step?thnx.
Thanks my beko is very similar took everything out and cleand fan(was blocked 75%)and plastic unit. The metal unit is seald shut with black pu type sealant so I left alone looked ok. Should a force open and re-sill if issue persists?
Pozdrav, isti problem imam na Haier perilici/sušilici. Koliko često treba raditi čišćenje? Mašina je stara godinu i pol dana, u jamstvu, al nemam vremena stalno zvati servis da ju čiste, htio bi to sam naučiti raditi
My washer dryer is getting stuck on 1 minute for liang time after drying, when i turn it off manually and wait few minutes till it cools a little bit then Clothes are hot and wet. I cleaned the drying channel but it didn't help. Any advice?
Your one click on the SUBSCRIBE button can bring joy to a humble soul and mean the world to me. Thank you for your support!
How do you remove the top lid? Thanks
This is only useful video i found on RUclips about My problem!! Thank you !!
Glad to help
Srecni praznici 😁
Hvala puno!
Sve najbolje 😊😊
Where is the thermal reset button?
Thanks I am trying to open the condenser on my AEG 7000 combi which looks very similar but there are many bolts and I am a bit wary of digging too deep in the machine...
Very helpful. Thank you
Hi,I have exactly the same problem with my Miele Wash and Dry,planning top open the top and get the condeser cleaned,any links on how to do this step by step?thnx.
Great video thanks
Glad you enjoyed it
Thanks my beko is very similar took everything out and cleand fan(was blocked 75%)and plastic unit. The metal unit is seald shut with black pu type sealant so I left alone looked ok. Should a force open and re-sill if issue persists?
How to remove condenser
I have BEKO hte 7616 x0 , I have the same symptoms, I guess it cleans similarly dryer filter
I had to do this on my old hotpoint Aquarius washer/dryer is was a right ballache 😕
How can I check heating element, the resistance is 45.and voltage is 114v but no amp
On my zanussi one I don't split the dryer tunnel in half. Rather I remove the fan and then access it
It can be done in that way
How to prevent this from happening
Thank you.
Thankyou
You’re welcome 😊
Pozdrav, isti problem imam na Haier perilici/sušilici. Koliko često treba raditi čišćenje?
Mašina je stara godinu i pol dana, u jamstvu, al nemam vremena stalno zvati servis da ju čiste, htio bi to sam naučiti raditi
Sve ti je u principu isti koncept rada
Moze da bude malo lakse ili teze da se rastavi ali u principu sve je isto
@@donmarkonhvala na odgovoru 👍
The lint build up is caused by Softener
I don't use softener so I think it happens sooner or later
I have this same model. I've opened it up, but I can't get the condenser out to clean it. Any tips or more info?
I hope you figured it out? First time is hard, after that it is easy :)
@@donmarkon I did. Found a video on an Indesit washer-dryer repair that guided me in the right direction. Works like a charm now. Thanks!
@@vanessawattamaniuk7060 hey I’m trying to find the video you mentioned of how to remove it, any chance you might have a link? Thanks 😊
@@ashleyturner93 exactly youll think rather then gloat she would of sent the video
@@vanessawattamaniuk7060 hello can your share the link for the video, pls. Thks
My washer dryer is getting stuck on 1 minute for liang time after drying, when i turn it off manually and wait few minutes till it cools a little bit then Clothes are hot and wet. I cleaned the drying channel but it didn't help. Any advice?
It sounds like mainboard problem ...
I have the same problem with my machine getting stuck at 0:11. The sensors are getting blocked by the lint/fluff
@@vikassingh-xu9km for me solenoid Valve was the issue. IT was cracked/broken. I replaced it and my washer works perfect
Ah i see it's an InTheShit 😂