How to Replace a Water Shut Off Valve Under Sink | Water Leaking from Supply Valve
HTML-код
- Опубликовано: 23 дек 2023
- We discovered a 20 + year old water stop valve that was leaking under our bathroom sink. Since trying to find a universal valve repair kit is quite difficult, we opted to replace the leaking supply valve.
We used a Watts Aqualock push fit valve to speed the repair. Check Amazon for that and similar water stop supply valves:
Watts AquaLock (3539-10)- Large Diameter Stop Valve/Shut Off Valve- 1/2" CTS/Single
amzn.to/41F1bt5
Watts
959098 Aqualock 3539-10 (P-650) Straight Valve, 1/2"
amzn.to/3tmB5P3
A similar product is made by Sharkbite :
SharkBite 1/2 x 3/8 Inch Compression Straight Stop Valve, Quarter Turn, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 23037-0000LF
amzn.to/3vpyzZ6
The process takes a littletime but is straight forward. Sink water supply shut offs will vary. Ours had a 3/8 inch copper line from the top of the shut off valve to the faucet. At the bottom of the shut off valve, we had a 1 inch copper pipe. Both ends of the existing supply valves were compression fittings.
THANKS FOR WATCHING!
Also, if you are in the market for any tools, check out our Amazon store front or the links below.
Visit our amazon store front for our recommendations for tools and supplies for DIY success!
www.amazon.com/shop/housebarons
If you click on any of the listed amazon links there or in this description and buy, we thank you for helping us out as a channel. We are Amazon affiliates and can earn from qualifying purchases and no extra cost for you. Thanks for the help in supporting our channel and enabling us to keep us making videos!
#plumbingleak #waterleak #watershutoff 
Хобби
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
Instead of cutting the ferrule or copper pipe , use a Ferrule Puller to remove the compression ring .
Nice tip - thx!
Im having this exact problem now and i just discovered that its my valve and seals…thank you for your clean informative video. I have to fix mine today after work
Glad it helped
I dislike those crap shutoff supply valves and have replaced all of mine with 1/4 turn quality valvles.
Nobodies gonna bring up that he left that old compression nut on the pipe below the new valve?
I used shark bites on a water heater install 3 years now zero issues. These hardware innovations are making it easy for homeowners to do simple fixes and save a lot of money.
That’s possibly why they get some naysayers chiming in. As innovations happen and maybe some in trades feel threatened, you get some negativity. But innovations will keep coming. We have always had good experiences with them as well.
Thx for the comments.
Use a compression sleeve puller. Alot easier lol...
Thx for the tip!!
@@Housebarons you're welcome!!!! Lol....
what happens if the pipe is broken? Mine broke just minutes ago and it doesn’t stick out like in the video. Do you have any tips on what I can do or do I have to replace the pipe by calling a plumber?
You can diy a pipe replacement… depends on how handy you are. RUclips videos are very helpful.
But If that is not in your wheel house - then handyman or plumber.
Thx for watching!
@@Housebarons😊 poop
When should copper pipes be completely replaced?
Copper lasts a very long time. They are also simple to repair.
The only time we’ve replaced all copper pipes was when we purchased a house from a bank that didn’t winterize it. So the water in the pipes froze & split the pipes in multiple locations. We were chasing endless leaks inside walls.
It might be worth replacing a small section under sink if you had a leak but throughout a house ? I’d keep them. Just my 2 cents.
Thx for watching!
I turned off the water supply to the house and the hot water is still leaking. Do I have to drain my water heater to replace the hot water shut off valve under the sink?
If you have sinks or pipes above the valve - then that might still be draining due to gravity,
If your water heater is upstairs , I still don’t think it would siphon.
Maybe let the valve drain into a bucket or pan, see if it eventually stops after the pipes empty…
Hopefully that is what’s going on.
Thanks! I have a one story house. I’ll try draining the water into buckets.
I think I would’ve just replaced that copper with flexible braided line. Well made how to video, this is a common issue that any homeowner should learn how to do. How much would a plumber have charged 😮
Probably couldnt get a plumber to open the door for $200… Maybe > $300
Compression shut offs are the best shuts offs , i don't Really Trust Shark Bites
I get ya. But s o f a r we have never had an issue.
Thx for watching!