thanks for your video man,love your voice!Idk if had tried afmf on these handhelds,lsfg feels much better even good for fps multiplayer games. Though screen tearing but the new version today makes it much better. I used the 24.2.1 amd driver on ally. It makes lsfg works even better I guess😂
Hey, when I tab out of a game, activate Lossless Scaling and try to go back into the game my controls arent working and I cannot navigate in the game🙄 Any Idea?
@@JahsonENTThis piece of software has enabled me to play many games that demand High Requirements to be very playable, going beyond 60fps and on Almost about High to Max settings. I am using this on a Lenovo Legion Go system. It requires time to set up but the work to make this work, is worth it. If there is a small/tiny amount of ghosting, it is normal - For Legion Go Users: My experience to setup this program are these steps. In Legion Bios - Vram Set to 4GB (could be set to 6GB via Firmware Update but I chosen 4GB) Set resolution in legion go to max - 2560x1600 @ 144hz Set the in-game to 30FPS Set the in-game resolution to 16:10 1200x800(Fullscreen) or 1200x720 (Widescreen = Blackbars) Turn on Vsync in-game Select the game to run in Windowed Mode In AMD Software: Adrenaline Edition, Find the .exe or open it ingame (ALT+R) *If performance settings are set to Default* & *Reset the Settings If any settings were tweaked previously* Enable Radeon Chill - Set Min and Max FPS to 72 Optional Radeon image sharpening - (my personal preference) I set to 100 Set Always ON in Wait for Vertical Refresh (In My current Setting) Gpu Scaling is enabled in Gaming>Display and scaling mode is Full panel (Need confirmation if these are necessary settings) *If settings are not shown, you need to do updates to legion go device* In Lossless Scaling Scaling mode - Set to Auto and Aspect Ratio Scaling Type - Choose one of the settings Listed, I chosen Nvidia Image Scaling + High amount of Sharpness for preference Enable Draw FPS (to show that the program is working, the FPS counter will be the one used, not steam's ingame FPS *FPS Counter will default show on the Top Left of the Monitor/Screen* Frame Generation - Was set to LSFG Click the blue Scale Button and with the countdown of 5-seconds, Click the Windowed Game or Alt+tab into the game and the screen will become Full screened and you're done *You can Alt Tab back into Lossless and change the scaling type and go back into the game to see the changes made like in the scaling type option *It's also good practice to Add a Profile for Each game you play because you may need different settings for each game.* It might be possible that these settings are also used for stuff like the ROG Ally or maybe the steamdeck? *Have not tried these settings on a Desktop/Laptop btw. *Setting FPS in Radeon Chill at 30FPS Causes Ghosting even with at 60 or 144hz in Legion Space *I will update this if I encounter or receive feedback to optimize everything *All tweak and adjustments were done while being charged via the stock 65w charger the legion comes with. *No man sky running on battery takes longer for the Fps to stabilize aka no ghosting + more than 60fps while scaled
I don't understand how to use this properly.. Should I keep my normal resolution of desktop low? Or should I lower the game resolution and then scale? Or should I keep game resolution and desktop resolution both low and then scale? The way I saw improvement on my was lowering the desktop res to 1280x800 and the game to 1600p.. which makes no difference.. but when I scale with the app I get some frames.. Idk overall the resolution looks like dog shit but fps is okay.. Graphics I can set to ultra tho..
I try using this on dying light 2 and when I turn it on I can't use the controller, it wants to use the keyboard and mouse controls. Anyone know how to use this without changing the controls???
Hey guys, these are fake FPS xD, what do you think, why only lossless scaling shows the fps xD. Furthermore, according to the developer, the application only works properly if the hz number of the monitor is halved!!! means 60hz = 30hz and at 144 = 72hz. So as shown in the video it can't work xD!!! Sorry for my english
Hey guys, these are fake FPS xD, what do you think, why only lossless scaling shows the fps xD. Furthermore, according to the developer, the application only works properly if the hz number of the monitor is halved!!! means 60hz = 30hz and at 144 = 72hz. So as shown in the video it can't work xD!!! Sorry for my english
2nd shout out yessir!!
I told you the few bucks was worth it . 👍
Yeah it was lol!
Lossless scaling just released an update to v2.7.0 and it's a game changer .
Thanks for the video ! New legion owner and been looking for ways to improve performance
you are welcome, thanks for the support!!
@@JahsonENT how many years do you think the steam deck, legion go, and rog Ally will be around?
@@GamerAnime2002 years
thanks for your video man,love your voice!Idk if had tried afmf on these handhelds,lsfg feels much better even good for fps multiplayer games. Though screen tearing but the new version today makes it much better. I used the 24.2.1 amd driver on ally. It makes lsfg works even better I guess😂
Thanks for tuning in!
How did I miss this vdo?! Great update thank you JahsonEnt!!!!
Subbed. Love your content brother!
Thank you for the support
If you late, I’m early lol thanks for the update
Thanks for tuning in
Homie not realizing your FPS will Skyrocket when you're staring at the sky LOL
Good video bruh its insane the fps go sky high 👌🏻, worth any penny and its only 6,99 thats cheap
Yeah it’s it lol. Thank for watching
Thanks mate 😊
Thanks for watching
Hey, when I tab out of a game, activate Lossless Scaling and try to go back into the game my controls arent working and I cannot navigate in the game🙄 Any Idea?
Tht happen to me few times not often tho, I have to restart the device
Hi Jahson, thanks for sharing :)
💪
Late still updating up all the time!,, thank youuuuu
thanks ones again
Welcome!!
I bought the legion go. Its terrible bro. The rog ally is smoother, faster loading as well. Help me
I videos on bout system on my channel show was to make them better
Hey how did you get your fps working
Lossless scaling app
Bro got Ninja Turtle thumbs 😂
😂 yeah bro!
I don't get what I'm doing wrong, it runs like crap when I enable it for some reason
Did u cap ur fps, and setup it up before enable it?
@@JahsonENT yea, it ended up being the legions built in fps overlay, starting the scalling with it on f*ed it all up
Does this work for warzone on battlenet?
Yes it should
I don’t use battlenet but it should work with any games even if not from steam
Ill give a shot thanks :)
Do you have 72 refresh rate for more fps?
On the device 60 or 144. Or can set target refresh rate
Man, you did a mistake. Frame generation in lossless scaling don't work on 60/144. You need 72. Check instruction
@@JahsonENTThis piece of software has enabled me to play many games that demand High Requirements to be very playable, going beyond 60fps and on Almost about High to Max settings. I am using this on a Lenovo Legion Go system.
It requires time to set up but the work to make this work, is worth it.
If there is a small/tiny amount of ghosting, it is normal
- For Legion Go Users: My experience to setup this program are these steps.
In Legion Bios - Vram Set to 4GB (could be set to 6GB via Firmware Update but I chosen 4GB)
Set resolution in legion go to max - 2560x1600 @ 144hz
Set the in-game to 30FPS
Set the in-game resolution to 16:10 1200x800(Fullscreen) or 1200x720 (Widescreen = Blackbars)
Turn on Vsync in-game
Select the game to run in Windowed Mode
In AMD Software: Adrenaline Edition, Find the .exe or open it ingame (ALT+R)
*If performance settings are set to Default* & *Reset the Settings If any settings were tweaked previously*
Enable Radeon Chill - Set Min and Max FPS to 72
Optional Radeon image sharpening - (my personal preference) I set to 100
Set Always ON in Wait for Vertical Refresh
(In My current Setting) Gpu Scaling is enabled in Gaming>Display and scaling mode is Full panel (Need confirmation if these are necessary settings) *If settings are not shown, you need to do updates to legion go device*
In Lossless Scaling
Scaling mode - Set to Auto and Aspect Ratio
Scaling Type - Choose one of the settings Listed, I chosen Nvidia Image Scaling + High amount of Sharpness for preference
Enable Draw FPS (to show that the program is working, the FPS counter will be the one used, not steam's ingame FPS
*FPS Counter will default show on the Top Left of the Monitor/Screen*
Frame Generation - Was set to LSFG
Click the blue Scale Button and with the countdown of 5-seconds, Click the Windowed Game or Alt+tab into the game and the screen will become Full screened and you're done
*You can Alt Tab back into Lossless and change the scaling type and go back into the game to see the changes made like in the scaling type option
*It's also good practice to Add a Profile for Each game you play because you may need different settings for each game.*
It might be possible that these settings are also used for stuff like the ROG Ally or maybe the steamdeck?
*Have not tried these settings on a Desktop/Laptop btw.
*Setting FPS in Radeon Chill at 30FPS Causes Ghosting even with at 60 or 144hz in Legion Space
*I will update this if I encounter or receive feedback to optimize everything
*All tweak and adjustments were done while being charged via the stock 65w charger the legion comes with.
*No man sky running on battery takes longer for the Fps to stabilize aka no ghosting + more than 60fps while scaled
I don’t see that in the note that they have on steam
@@JahsonENThow can I send you instruction? RUclips deleted my comments
I don't understand how to use this properly..
Should I keep my normal resolution of desktop low?
Or should I lower the game resolution and then scale?
Or should I keep game resolution and desktop resolution both low and then scale?
The way I saw improvement on my was lowering the desktop res to 1280x800 and the game to 1600p.. which makes no difference.. but when I scale with the app I get some frames..
Idk overall the resolution looks like dog shit but fps is okay..
Graphics I can set to ultra tho..
lower it on the device and in game to 800p, then you can put up the in game graphics
i would cap that at 70
very cool though
Hi. do you know why my fps counter is upside down on the side. Not like you. looks like my screen is in portrait mode. Thx.
Maybe just have change ur screen back to Landscape
Do you know why screen turns darker, when turn this on
I notice that too not sure why. I had to just turn up ingame brightness and was good after
Are you using it with integer scaling?
No, but I heard that’s good option to have on too
Doesn’t do anything for Baldurs gate 3:(
I was going to try this on BG3 😢
👍👍👍👍
💪
Why on call of duty three it boots me out?
not sure why, it could be for any reason. check see if drivers up todate
I try using this on dying light 2 and when I turn it on I can't use the controller, it wants to use the keyboard and mouse controls. Anyone know how to use this without changing the controls???
not sure why that happen, did u try closing gaming restart
this would help on emulators?how about battery life?
This works best on emulators pal. Makes a huge difference.
FPS ain’t showing on mine an it on
U have to change to borderless
I did some update and it broke my fps counter have no idea how to fix it
Tht be happening sometime when ever Lenovo releases updates
Uninstaller the all drivers and install again
Hey guys, these are fake FPS xD, what do you think, why only lossless scaling shows the fps xD. Furthermore, according to the developer, the application only works properly if the hz number of the monitor is halved!!! means 60hz = 30hz and at 144 = 72hz. So as shown in the video it can't work xD!!!
Sorry for my english
Amazing
4k HDR video.... Nice.
Your thumbs look like big toes
Thank you 😅
Does it work on cracked games?
Not sure
Yup tried it on GTA IV, Cyberpunk n others
Just tried and made it worse?
U got the right setting?
@@JahsonENT yea did everything you did ? Dont think im missing anythingg
What game yu trying it with?
@@JahsonENT I shutdown the gonrestsrted ran it again and is now working. 70 plus fps. Was running with spiderman.
Does it work for most games.
Yes
Your fingers look like something else haha
😂 you not first to say it 😂
Hey guys, these are fake FPS xD, what do you think, why only lossless scaling shows the fps xD. Furthermore, according to the developer, the application only works properly if the hz number of the monitor is halved!!! means 60hz = 30hz and at 144 = 72hz. So as shown in the video it can't work xD!!!
Sorry for my english